| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Wrap kvm_vcpu_exit_request()'s load of vcpu->mode with READ_ONCE() to
ensure the variable is re-loaded from memory, as there is no guarantee the
caller provides the necessary annotations to ensure KVM sees a fresh value,
e.g. the VM-Exit fastpath could theoretically reuse the pre-VM-Enter value.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240828232013.768446-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Change svm_vcpu_run() to vcpu_enter_guest() in the comment of
__kvm_set_or_clear_apicv_inhibit() to make it reflect the fact.
When one thread updates VM's APICv state due to updating the APICv
inhibit reasons, it kicks off all vCPUs and makes them wait until the
new reason has been updated and can be seen by all vCPUs.
There was one WARN() to make sure VM's APICv state is consistent with
vCPU's APICv state in the svm_vcpu_run(). Commit ee49a8932971 ("KVM:
x86: Move SVM's APICv sanity check to common x86") moved that WARN() to
x86 common code vcpu_enter_guest() due to the logic is not unique to
SVM, and added comments to both __kvm_set_or_clear_apicv_inhibit() and
vcpu_enter_guest() to explain this.
However, although the comment in __kvm_set_or_clear_apicv_inhibit()
mentioned the WARN(), it seems forgot to reflect that the WARN() had
been moved to x86 common, i.e., it still mentioned the svm_vcpu_run()
but not vcpu_enter_guest(). Fix it.
Note after the change the first line that contains vcpu_enter_guest()
exceeds 80 characters, but leave it as is to make the diff clean.
Fixes: ee49a8932971 ("KVM: x86: Move SVM's APICv sanity check to common x86")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/e462e7001b8668649347f879c66597d3327dbac2.1728383775.git.kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The sentence "... so that KVM can the AVIC doorbell to ..." doesn't have
a verb. Fix it.
After adding the verb 'use', that line exceeds 80 characters. Thus wrap
the 'to' to the next line.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/666e991edf81e1fccfba9466f3fe65965fcba897.1728383775.git.kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM VMX changes for 6.12:
- Set FINAL/PAGE in the page fault error code for EPT Violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
- Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
- Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
- Minor SGX fix and a cleanup.
|
|
KVM VMX and x86 PAT MSR macro cleanup for 6.12:
- Add common defines for the x86 architectural memory types, i.e. the types
that are shared across PAT, MTRRs, VMCSes, and EPTPs.
- Clean up the various VMX MSR macros to make the code self-documenting
(inasmuch as possible), and to make it less painful to add new macros.
|
|
KVM x86 MMU changes for 6.12:
- Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
- Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding MGLRU support in KVM.
- Misc cleanups
|
|
KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
|
|
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename reexecute_instruction() to kvm_unprotect_and_retry_on_failure() to
make the intent and purpose of the helper much more obvious.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When retrying the faulting instruction after emulation failure, refresh
the infinite loop protection fields even if no shadow pages were zapped,
i.e. avoid hitting an infinite loop even when retrying the instruction as
a last-ditch effort to avoid terminating the guest.
Link: https://lore.kernel.org/r/20240831001538.336683-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use kvm_mmu_unprotect_gfn_and_retry() in reexecute_instruction() to pick
up protection against infinite loops, e.g. if KVM somehow manages to
encounter an unsupported instruction and unprotecting the gfn doesn't
allow the vCPU to make forward progress. Other than that, the retry-on-
failure logic is a functionally equivalent, open coded version of
kvm_mmu_unprotect_gfn_and_retry().
Note, the emulation failure path still isn't fully protected, as KVM
won't update the retry protection fields if no shadow pages are zapped
(but this change is still a step forward). That flaw will be addressed
in a future patch.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't bother unprotecting the target gfn if EMULTYPE_WRITE_PF_TO_SP is
set, as KVM will simply report the emulation failure to userspace. This
will allow converting reexecute_instruction() to use
kvm_mmu_unprotect_gfn_instead_retry() instead of kvm_mmu_unprotect_page().
Link: https://lore.kernel.org/r/20240831001538.336683-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the manual pfn look when retrying an instruction that KVM failed to
emulation in response to a #PF due to a write-protected gfn. Now that KVM
sets EMULTYPE_ALLOW_RETRY_PF if and only if the page fault hit a write-
protected gfn, i.e. if and only if there's a writable memslot, there's no
need to redo the lookup to avoid retrying an instruction that failed on
emulated MMIO (no slot, or a write to a read-only slot).
I.e. KVM will never attempt to retry an instruction that failed on
emulated MMIO, whereas that was not the case prior to the introduction of
RET_PF_WRITE_PROTECTED.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that retry_instruction() is reasonably tiny, fold it into its sole
caller, x86_emulate_instruction(). In addition to getting rid of the
absurdly confusing retry_instruction() name, handling the retry in
x86_emulate_instruction() pairs it back up with the code that resets
last_retry_{eip,address}.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the sanity checks for EMULTYPE_ALLOW_RETRY_PF to the top of
x86_emulate_instruction(). In addition to deduplicating a small amount
of code, this makes the connection between EMULTYPE_ALLOW_RETRY_PF and
EMULTYPE_PF even more explicit, and will allow dropping retry_instruction()
entirely.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the anti-infinite-loop protection provided by last_retry_{eip,addr}
into kvm_mmu_write_protect_fault() so that it guards unprotect+retry that
never hits the emulator, as well as reexecute_instruction(), which is the
last ditch "might as well try it" logic that kicks in when emulation fails
on an instruction that faulted on a write-protected gfn.
Add a new helper, kvm_mmu_unprotect_gfn_and_retry(), to set the retry
fields and deduplicate other code (with more to come).
Link: https://lore.kernel.org/r/20240831001538.336683-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Store the gpa used to unprotect the faulting gfn for retry as a gpa_t, not
an unsigned long. This fixes a bug where 32-bit KVM would unprotect and
retry the wrong gfn if the gpa had bits 63:32!=0. In practice, this bug
is functionally benign, as unprotecting the wrong gfn is purely a
performance issue (thanks to the anti-infinite-loop logic). And of course,
almost no one runs 32-bit KVM these days.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Read RIP from vCPU state instead of pulling it from the emulation context
when filling last_retry_eip, which is part of the anti-infinite-loop
protection used when unprotecting and retrying instructions that hit a
write-protected gfn.
This will allow reusing the anti-infinite-loop protection in flows that
never make it into the emulator.
No functional change intended, as ctxt->eip is set to kvm_rip_read() in
init_emulate_ctxt(), and EMULTYPE_PF emulation is mutually exclusive with
EMULTYPE_NO_DECODE and EMULTYPE_SKIP, i.e. always goes through
x86_decode_emulated_instruction() and hasn't advanced ctxt->eip (yet).
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Resume the guest and thus skip emulation of a non-PTE-writing instruction
if and only if unprotecting the gfn actually zapped at least one shadow
page. If the gfn is write-protected for some reason other than shadow
paging, attempting to unprotect the gfn will effectively fail, and thus
retrying the instruction is all but guaranteed to be pointless. This bug
has existed for a long time, but was effectively fudged around by the
retry RIP+address anti-loop detection.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Leave nested mode before synthesizing shutdown (a.k.a. TRIPLE_FAULT) if
RSM fails when resuming L2 (a.k.a. guest mode). Architecturally, shutdown
on RSM occurs _before_ the transition back to guest mode on both Intel and
AMD.
On Intel, per the SDM pseudocode, SMRAM state is loaded before critical
VMX state:
restore state normally from SMRAM;
...
CR4.VMXE := value stored internally;
IF internal storage indicates that the logical processor had been in
VMX operation (root or non-root)
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 32.14.1;
...
restore current VMCS pointer;
FI;
AMD's APM is both less clearcut and more explicit. Because AMD CPUs save
VMCB and guest state in SMRAM itself, given the lack of anything in the
APM to indicate a shutdown in guest mode is possible, a straightforward
reading of the clause on invalid state is that _what_ state is invalid is
irrelevant, i.e. all roads lead to shutdown.
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area.
This fixes a bug found by syzkaller where synthesizing shutdown for L2
led to a nested VM-Exit (if L1 is intercepting shutdown), which in turn
caused KVM to complain about trying to cancel a nested VM-Enter (see
commit 759cbd59674a ("KVM: x86: nSVM/nVMX: set nested_run_pending on VM
entry which is a result of RSM").
Note, Paolo pointed out that KVM shouldn't set nested_run_pending until
after loading SMRAM state. But as above, that's only half the story, KVM
shouldn't transition to guest mode either. Unfortunately, fixing that
mess requires rewriting the nVMX and nSVM RSM flows to not piggyback
their nested VM-Enter flows, as executing the nested VM-Enter flows after
loading state from SMRAM would clobber much of said state.
For now, add a FIXME to call out that transitioning to guest mode before
loading state from SMRAM is wrong.
Link: https://lore.kernel.org/all/CABgObfYaUHXyRmsmg8UjRomnpQ0Jnaog9-L2gMjsjkqChjDYUQ@mail.gmail.com
Reported-by: syzbot+988d9efcdf137bc05f66@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000007a9acb06151e1670@google.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Closes: https://lore.kernel.org/all/CAMhUBjmXMYsEoVYw_M8hSZjBMHh24i88QYm-RY6HDta5YZ7Wgw@mail.gmail.com
Analyzed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Cc: Kishen Maloor <kishen.maloor@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906161337.1118412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94cc0 ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Register the "disable virtualization in an emergency" callback just
before KVM enables virtualization in hardware, as there is no functional
need to keep the callbacks registered while KVM happens to be loaded, but
is inactive, i.e. if KVM hasn't enabled virtualization.
Note, unregistering the callback every time the last VM is destroyed could
have measurable latency due to the synchronize_rcu() needed to ensure all
references to the callback are dropped before KVM is unloaded. But the
latency should be a small fraction of the total latency of disabling
virtualization across all CPUs, and userspace can set enable_virt_at_load
to completely eliminate the runtime overhead.
Add a pointer in kvm_x86_ops to allow vendor code to provide its callback.
There is no reason to force vendor code to do the registration, and either
way KVM would need a new kvm_x86_ops hook.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename x86's the per-CPU vendor hooks used to enable virtualization in
hardware to align with the recently renamed arch hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename the per-CPU hooks used to enable virtualization in hardware to
align with the KVM-wide helpers in kvm_main.c, and to better capture that
the callbacks are invoked on every online CPU.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93bcf ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Dohrmann <erbse.13@gmx.de>
Message-ID: <20240902144219.3716974-1-erbse.13@gmx.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a fastpath for HLT VM-Exits by immediately re-entering the guest if
it has a pending wake event. When virtual interrupt delivery is enabled,
i.e. when KVM doesn't need to manually inject interrupts, this allows KVM
to stay in the fastpath run loop when a vIRQ arrives between the guest
doing CLI and STI;HLT. Without AMD's Idle HLT-intercept support, the CPU
generates a HLT VM-Exit even though KVM will immediately resume the guest.
Note, on bare metal, it's relatively uncommon for a modern guest kernel to
actually trigger this scenario, as the window between the guest checking
for a wake event and committing to HLT is quite small. But in a nested
environment, the timings change significantly, e.g. rudimentary testing
showed that ~50% of HLT exits where HLT-polling was successful would be
serviced by this fastpath, i.e. ~50% of the time that a nested vCPU gets
a wake event before KVM schedules out the vCPU, the wake event was pending
even before the VM-Exit.
Link: https://lore.kernel.org/all/20240528041926.3989-3-manali.shukla@amd.com
Link: https://lore.kernel.org/r/20240802195120.325560-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Shuffle code around in x86.c so that the various helpers related to vCPU
blocking/running logic are (a) located near each other and (b) ordered so
that HLT emulation can use kvm_vcpu_has_events() in a future path.
No functional change intended.
Link: https://lore.kernel.org/r/20240802195120.325560-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Exit to userspace if a fastpath handler triggers such an exit, which can
happen when skipping the instruction, e.g. due to userspace
single-stepping the guest via KVM_GUESTDBG_SINGLESTEP or because of an
emulation failure.
Fixes: 404d5d7bff0d ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Link: https://lore.kernel.org/r/20240802195120.325560-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that the WRMSR fastpath for x2APIC_ICR and TSC_DEADLINE are identical,
ignoring the backend MSR handling, consolidate the common bits of skipping
the instruction and setting the return value.
No functional change intended.
Link: https://lore.kernel.org/r/20240802195120.325560-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Re-enter the guest in the fastpath if WRMSR emulation for x2APIC's ICR is
successful, as no additional work is needed, i.e. there is no code unique
for WRMSR exits between the fastpath and the "!= EXIT_FASTPATH_NONE" check
in __vmx_handle_exit().
Link: https://lore.kernel.org/r/20240802195120.325560-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend KVM's suppression of userspace MSR access failures to MSRs that KVM
reports as emulated, but are ultimately unsupported, e.g. if the VMX MSRs
are emulated by KVM, but are unsupported given the vCPU model.
Suggested-by: Weijiang Yang <weijiang.yang@intel.com>
Reviewed-by: Weijiang Yang <weijiang.yang@intel.com>
Link: https://lore.kernel.org/r/20240802181935.292540-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend KVM's suppression of failures due to a userspace access to an
unsupported, but advertised as a "to save" MSR to all MSRs, not just those
that happen to reach the default case statements in kvm_get_msr_common()
and kvm_set_msr_common(). KVM's soon-to-be-established ABI is that if an
MSR is advertised to userspace, then userspace is allowed to read the MSR,
and write back the value that was read, i.e. why an MSR is unsupported
doesn't change KVM's ABI.
Practically speaking, this is very nearly a nop, as the only other paths
that return KVM_MSR_RET_UNSUPPORTED are {svm,vmx}_get_feature_msr(), and
it's unlikely, though not impossible, that userspace is using KVM_GET_MSRS
on unsupported MSRs.
The primary goal of moving the suppression to common code is to allow
returning KVM_MSR_RET_UNSUPPORTED as appropriate throughout KVM, without
having to manually handle the "is userspace accessing an advertised"
waiver. I.e. this will allow formalizing KVM's ABI without incurring a
high maintenance cost.
Link: https://lore.kernel.org/r/20240802181935.292540-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the definitions of the various MSR arrays above kvm_do_msr_access()
so that kvm_do_msr_access() can query the arrays when handling failures,
e.g. to squash errors if userspace tries to read an MSR that isn't fully
supported, but that KVM advertised as being an MSR-to-save.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a common helper, kvm_do_msr_access(), to invoke the "leaf" APIs that
are type and access specific, and more importantly to handle errors that
are returned from the leaf APIs. I.e. turn kvm_msr_ignored_check() from a
a helper that is called on an error, into a trampoline that detects errors
*and* applies relevant side effects, e.g. logging unimplemented accesses.
Because the leaf APIs are used for guest accesses, userspace accesses, and
KVM accesses, and because KVM supports restricting access to MSRs from
userspace via filters, the error handling is subtly non-trivial. E.g. KVM
has had at least one bug escape due to making each "outer" function handle
errors. See commit 3376ca3f1a20 ("KVM: x86: Fix KVM_GET_MSRS stack info
leak").
Link: https://lore.kernel.org/r/20240802181935.292540-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor kvm_get_feature_msr() to take the components of kvm_msr_entry as
separate parameters, along with a vCPU pointer, i.e. to give it the same
prototype as kvm_{g,s}et_msr_ignored_check(). This will allow using a
common inner helper for handling accesses to "regular" and feature MSRs.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename all APIs related to feature MSRs from get_msr_feature() to
get_feature_msr(). The APIs get "feature MSRs", not "MSR features".
And unlike kvm_{g,s}et_msr_common(), the "feature" adjective doesn't
describe the helper itself.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor get_msr_feature() to take the index and data pointer as distinct
parameters in anticipation of eliminating "struct kvm_msr_entry" usage
further up the primary callchain.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename the "INVALID" internal MSR error return code to "UNSUPPORTED" to
try and make it more clear that access was denied because the MSR itself
is unsupported/unknown. "INVALID" is too ambiguous, as it could just as
easily mean the value for WRMSR as invalid.
Avoid UNKNOWN and UNIMPLEMENTED, as the error code is used for MSRs that
_are_ actually implemented by KVM, e.g. if the MSR is unsupported because
an associated feature flag is not present in guest CPUID.
Opportunistically beef up the comments for the internal MSR error codes.
Link: https://lore.kernel.org/r/20240802181935.292540-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use this_cpu_ptr() instead of open coding the equivalent in
kvm_user_return_msr_cpu_online.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Link: https://lore.kernel.org/r/87zfp96ojk.wl-me@linux.beauty
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Synthesize a consistency check VM-Exit (VM-Enter) or VM-Abort (VM-Exit) if
L1 attempts to load/store an MSR via the VMCS MSR lists that userspace has
disallowed access to via an MSR filter. Intel already disallows including
a handful of "special" MSRs in the VMCS lists, so denying access isn't
completely without precedent.
More importantly, the behavior is well-defined _and_ can be communicated
the end user, e.g. to the customer that owns a VM running as L1 on top of
KVM. On the other hand, ignoring userspace MSR filters is all but
guaranteed to result in unexpected behavior as the access will hit KVM's
internal state, which is likely not up-to-date.
Unlike KVM-internal accesses, instruction emulation, and dedicated VMCS
fields, the MSRs in the VMCS load/store lists are 100% guest controlled,
thus making it all but impossible to reason about the correctness of
ignoring the MSR filter. And if userspace *really* wants to deny access
to MSRs via the aforementioned scenarios, userspace can hide the
associated feature from the guest, e.g. by disabling the PMU to prevent
accessing PERF_GLOBAL_CTRL via its VMCS field. But for the MSR lists, KVM
is blindly processing MSRs; the MSR filters are the _only_ way for
userspace to deny access.
This partially reverts commit ac8d6cad3c7b ("KVM: x86: Only do MSR
filtering when access MSR by rdmsr/wrmsr").
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Cc: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240722235922.3351122-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the stuffing of the vCPU's PAT to the architectural "default" value
from kvm_arch_vcpu_create() to kvm_vcpu_reset(), guarded by !init_event,
to better capture that the default value is the value "Following Power-up
or Reset". E.g. setting PAT only during creation would break if KVM were
to expose a RESET ioctl() to userspace (which is unlikely, but that's not
a good reason to have unintuitive code).
No functional change.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240605231918.2915961-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK>
Fixes: f7e570780efc ("KVM: x86: Forcibly leave nested virt when SMM state is toggled")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240723232055.3643811-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use this_cpu_ptr() instead of open coding the equivalent in various
user return MSR helpers.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240802201630.339306-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_PRE_FAULT_MEMORY for an SNP guest can race with
sev_gmem_post_populate() in bad ways. The following sequence for
instance can potentially trigger an RMP fault:
thread A, sev_gmem_post_populate: called
thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP
thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i);
thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE);
RMP #PF
Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's
initial private memory contents have been finalized via
KVM_SEV_SNP_LAUNCH_FINISH.
Beyond fixing this issue, it just sort of makes sense to enforce this,
since the KVM_PRE_FAULT_MEMORY documentation states:
"KVM maps memory as if the vCPU generated a stage-2 read page fault"
which sort of implies we should be acting on the same guest state that a
vCPU would see post-launch after the initial guest memory is all set up.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduces kvm_x86_call(), to streamline the usage of static calls of
kvm_x86_ops. The current implementation of these calls is verbose and
could lead to alignment challenges. This makes the code susceptible to
exceeding the "80 columns per single line of code" limit as defined in
the coding-style document. Another issue with the existing implementation
is that the addition of kvm_x86_ prefix to hooks at the static_call sites
hinders code readability and navigation. kvm_x86_call() is added to
improve code readability and maintainability, while adhering to the coding
style guidelines.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The use of static_call_cond() is essentially the same as static_call() on
x86 (e.g. static_call() now handles a NULL pointer as a NOP), so replace
it with static_call() to simplify the code.
Link: https://lore.kernel.org/all/3916caa1dcd114301a49beafa5030eca396745c1.1679456900.git.jpoimboe@kernel.org/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Reported-by: syzbot+2fb9f8ed752c01bc9a3f@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712144841.1230591-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM VMX changes for 6.11
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
|
Sean Christopherson
Kai Huang
Paolo Bonzini
Linus Torvalds
Tom Dohrmann
Li Chen
Isaku Yamahata
Wei Wang