aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/block (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-15net: sched: implement terse dump support in actVlad Buslov4-9/+52
Extend tcf_action_dump() with boolean argument 'terse' that is used to request terse-mode action dump. In terse mode only essential data needed to identify particular action (action kind, cookie, etc.) and its stats is put to resulting skb and everything else is omitted. Implement tcf_exts_terse_dump() helper in cls API that is intended to be used to request terse dump of all exts (actions) attached to the filter. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: sched: introduce terse dump flagVlad Buslov3-8/+41
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option is intended to be used to improve performance of TC filter dump when userland only needs to obtain stats and not the whole classifier/action data. Extend struct tcf_proto_ops with new terse_dump() callback that must be defined by supporting classifier implementations. Support of the options in specific classifiers and actions is implemented in following patches in the series. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: core: recursively find netdev by device nodeTobias Waldekranz1-5/+5
The assumption that a device node is associated either with the netdev's device, or the parent of that device, does not hold for all drivers. E.g. Freescale's DPAA has two layers of platform devices above the netdev. Instead, recursively walk up the tree from the netdev, allowing any parent to match against the sought after node. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14selftests/bpf: Test for sk helpers in cgroup skbAndrey Ignatov2-0/+192
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and bpf_sk_ancestor_cgroup_id helpers from cgroup skb program. The test creates a testing cgroup, starts a TCPv6 server inside the cgroup and creates two client sockets: one inside testing cgroup and one outside. Then it attaches cgroup skb program to the cgroup that checks all TCP segments coming to the server and allows only those coming from the cgroup of the server. If a segment comes from a peer outside of the cgroup, it'll be dropped. Finally the test checks that client from inside testing cgroup can successfully connect to the server, but client outside the cgroup fails to connect by timeout. The main goal of the test is to check newly introduced bpf_sk_{,ancestor_}cgroup_id helpers. It also checks a couple of socket lookup helpers (tcp & release), but lookup helpers were introduced much earlier and covered by other tests. Here it's mostly checked that they can be called from cgroup skb. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
2020-05-14selftests/bpf: Add connect_fd_to_fd, connect_wait net helpersAndrey Ignatov2-13/+63
Add two new network helpers. connect_fd_to_fd connects an already created client socket fd to address of server fd. Sometimes it's useful to separate client socket creation and connecting this socket to a server, e.g. if client socket has to be created in a cgroup different from that of server cgroup. Additionally connect_to_fd is now implemented using connect_fd_to_fd, both helpers don't treat EINPROGRESS as an error and let caller decide how to proceed with it. connect_wait is a helper to work with non-blocking client sockets so that if connect_to_fd or connect_fd_to_fd returned -1 with errno == EINPROGRESS, caller can wait for connect to finish or for connection timeout. The helper returns -1 on error, 0 on timeout (1sec, hard-coded), and positive number on success. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/1403fab72300f379ca97ead4820ae43eac4414ef.1589486450.git.rdna@fb.com
2020-05-14bpf: Introduce bpf_sk_{, ancestor_}cgroup_id helpersAndrey Ignatov3-11/+121
With having ability to lookup sockets in cgroup skb programs it becomes useful to access cgroup id of retrieved sockets so that policies can be implemented based on origin cgroup of such socket. For example, a container running in a cgroup can have cgroup skb ingress program that can lookup peer socket that is sending packets to a process inside the container and decide whether those packets should be allowed or denied based on cgroup id of the peer. More specifically such ingress program can implement intra-host policy "allow incoming packets only from this same container and not from any other container on same host" w/o relying on source IP addresses since quite often it can be the case that containers share same IP address on the host. Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id(). These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id helpers with the only difference that sk is used to get cgroup id instead of skb, and share code with them. See documentation in UAPI for more details. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/f5884981249ce911f63e9b57ecd5d7d19154ff39.1589486450.git.rdna@fb.com
2020-05-14bpf: Allow skb_ancestor_cgroup_id helper in cgroup skbAndrey Ignatov1-0/+2
cgroup skb programs already can use bpf_skb_cgroup_id. Allow bpf_skb_ancestor_cgroup_id as well so that container policies can be implemented for a container that can have sub-cgroups dynamically created, but policies should still be implemented based on cgroup id of container itself not on an id of a sub-cgroup. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/8874194d6041eba190356453ea9f6071edf5f658.1589486450.git.rdna@fb.com
2020-05-14bpf: Allow sk lookup helpers in cgroup skbAndrey Ignatov1-0/+8
Currently sk lookup helpers are allowed in tc, xdp, sk skb, and cgroup sock_addr programs. But they would be useful in cgroup skb as well so that for example cgroup skb ingress program can lookup a peer socket a packet comes from on same host and make a decision whether to allow or deny this packet based on the properties of that socket, e.g. cgroup that peer socket belongs to. Allow the following sk lookup helpers in cgroup skb: * bpf_sk_lookup_tcp; * bpf_sk_lookup_udp; * bpf_sk_release; * bpf_skc_lookup_tcp. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/f8c7ee280f1582b586629436d777b6db00597d63.1589486450.git.rdna@fb.com
2020-05-14selftest/bpf: Fix spelling mistake "SIGALARM" -> "SIGALRM"Colin Ian King1-1/+1
There is a spelling mistake in an error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200514121529.259668-1-colin.king@canonical.com
2020-05-14bpf: Fix bpf_iter's task iterator logicAndrii Nakryiko1-1/+7
task_seq_get_next might stop prematurely if get_pid_task() fails to get task_struct. Failure to do so doesn't mean that there are no more tasks with higher pids. Procfs's iteration algorithm (see next_tgid in fs/proc/base.c) does a retry in such case. After this fix, instead of stopping prematurely after about 300 tasks on my server, bpf_iter program now returns >4000, which sounds much closer to reality. Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200514055137.1564581-1-andriin@fb.com
2020-05-14selftests/bpf: Test narrow loads for bpf_sock_addr.user_portAndrey Ignatov1-10/+28
Test 1,2,4-byte loads from bpf_sock_addr.user_port in sock_addr programs. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/e5c734a58cca4041ab30cb5471e644246f8cdb5a.1589420814.git.rdna@fb.com
2020-05-14bpf: Support narrow loads from bpf_sock_addr.user_portAndrey Ignatov3-10/+9
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly code in BPF programs, like: volatile __u32 user_port = ctx->user_port; __u16 port = bpf_ntohs(user_port); Since otherwise clang may optimize the load to be 2-byte and it's rejected by verifier. Add support for 1- and 2-byte loads same way as it's supported for other fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
2020-05-14samples/bpf: xdp_redirect_cpu: Set MAX_CPUS according to NR_CPUSLorenzo Bianconi2-14/+17
xdp_redirect_cpu is currently failing in bpf_prog_load_xattr() allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since cpu_map_alloc() requires max_entries to be less than NR_CPUS. Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c and get currently running cpus in xdp_redirect_cpu_user.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/374472755001c260158c4e4b22f193bdd3c56fb7.1589300442.git.lorenzo@kernel.org
2020-05-14r8169: don't include linux/moduleparam.hHeiner Kallweit1-1/+0
93882c6f210a ("r8169: switch from netif_xxx message functions to netdev_xxx") removed the last module parameter from the driver, therefore there's no need any longer to include linux/moduleparam.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14r8169: remove not needed checks in rtl8169_set_eeeHeiner Kallweit1-6/+0
After 9de5d235b60a ("net: phy: fix aneg restart in phy_ethtool_set_eee") we don't need the check for aneg being enabled any longer, and as discussed with Russell configuring the EEE advertisement should be supported even if we're in a half-duplex mode currently. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: dsa: felix: fix incorrect clamp calculation for burstColin Ian King1-1/+1
Currently burst is clamping on rate and not burst, the assignment of burst from the clamping discards the previous assignment of burst. This looks like a cut-n-paste error from the previous clamping calculation on ramp. Fix this by replacing ramp with burst. Addresses-Coverity: ("Unused value") Fixes: 0fbabf875d18 ("net: dsa: felix: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: mdio-moxart: remove unneeded includeBartosz Golaszewski1-1/+0
mdio-moxart doesn't use regulators in the driver code. We can remove the regulator include. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14dt-bindings: dp83867: Convert DP83867 to yamlDan Murphy2-68/+127
Convert the dp83867 binding to yaml. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14dt-bindings: net: dp83869: Update licensing infoDan Murphy1-1/+1
Add BSD 2 Clause to the licensing. CC: Rob Herring <robh@kernel.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14hinic: update huawei ethernet driver maintainerLuo bin1-1/+1
update huawei ethernet driver maintainer from aviad to Bin luo Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14hinic: add set_ringparam ethtool_ops supportLuo bin11-15/+104
support to change TX/RX queue depth with ethtool -G Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14devlink: refactor end checks in devlink_nl_cmd_region_read_dumpitJakub Kicinski2-25/+31
Clean up after recent fixes, move address calculations around and change the variable init, so that we can have just one start_offset == end_offset check. Make the check a little stricter to preserve the -EINVAL error if requested start offset is larger than the region itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ethernet: ti: am65-cpsw-qos: add TAPRIO offload supportIvan Khoronzhuk7-3/+689
AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() to offload EST configuration to CPSW h/w. Currently driver supports only SetGateStates operation. EST operates on a repeating time interval generated by the CPTS EST function generator. Each Ethernet port has a global EST fetch RAM that can be configured as 2 buffers, each of 64 locations or one large buffer of 128 locations. In 2 buffer configuration, a ping pong mechanism is used to hold the active schedule (oper) in one buffer and new (admin) command in the other. Each 22-bit fetch command consists of a 14-bit fetch count (14 MSB’s) and an 8-bit priority fetch allow (8 LSB’s) that will be applied for the fetch count time in wireside clocks. Driver process each of the sched-entry in the offload command and update the fetch RAM. Driver configures duration in sched-entry into the fetch count and Gate mask into the priority fetch bits of the RAM. Then configures the CPTS EST function generator to activate the schedule. Currently driver supports only 2 buffer configuration which means driver supports a max cycle time of ~8 msec. CPSW supports a configurable number of priority queues (up to 8) and needs to be switched to this mode from the default round robin mode before EST can be offloaded. User configures these through ethtool commands (-L for changing number of queues and --set-priv-flags to disable round robin mode). Driver doesn't enable EST if pf_p0_rx_ptype_rrobin privat flag is set. The flag is common for all ports, and so can't be just overridden by taprio configuration w/o user involvement. Command fails if pf_p0_rx_ptype_rrobin is already set in the driver. Scheds (commands) configuration depends on interface speed so driver translates the duration to the fetch count based on link speed. Each schedule can be constructed with several command entries in fetch RAM depending on interval. For example if each sched has timer interval < ~130us on 1000 Mb link then each sched consumes one command and have 1:1 mapping. When Ethernet link goes down, driver purge the configuration if link is down for more than 1 second. The patch allows to update the timer and scheds memory only if it's really needed, and skip cases required the user to stop timer by configuring only shceds memory. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ethernet: ti: am65-cpts: add routines to support taprio offloadIvan Khoronzhuk2-0/+72
TAPRIO/EST offload support in CPSW2G requires EST scheduler function enabled in CPTS. So this patch add a function to set cycle time for EST scheduler. It also add a function for getting time in ns of PHC clock for taprio qdisc configuration. Mostly to verify if timer update is needed or to get actual state of oper/admin schedule. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: fix bad formattingIgor Russkikh1-3/+2
On some adjacent code, fix bad code formatting Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical hardware error handlerIgor Russkikh3-1/+153
MCP may signal driver about generic critical failure. Driver has to collect mdump information (get_retain), it pushes that to logs and triggers generic notification on "hardware attention" event. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical fan failure handlerIgor Russkikh2-1/+15
Fan failure is sent by firmware, driver reacts on this error with newly introduced notification path. It will collect dump and shut down the device to prevent physical breakage Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: Implement ndo_tx_timeoutDenis Bolotin2-1/+46
Upon tx timeout detection we do disable carrier and print TX queue info on TX timeout. We then raise hw error condition and trigger service task to handle this. This handler will capture extra debug info and then optionally trigger recovery procedure to try restore function. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: optional hw recovery procedureIgor Russkikh1-0/+24
Driver has an ability to initiate a recovery process as a reaction to detected errors. But the codepath (recovery_process) was disabled and never active. Here we add ethtool private flag to allow user have the recovery procedure activated. We still do not enable this by default though, since in some configurations this is not desirable. E.g. this may impact other PFs/VFs. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: attention clearing propertiesIgor Russkikh6-5/+53
On different hardware events we have to respond differently, on some of hardware indications hw attention (error condition) should be cleared by the driver to continue normal functioning. Here we introduce attention clear flags, and put them on some important events (in aeu_descs). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: cleanup debug related declarationsIgor Russkikh2-21/+16
Thats probably a legacy code had double declaration of some fields. Cleanup this, removing copy and fixing references. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: critical err reporting to management firmwareIgor Russkikh4-0/+161
On various critical errors, notification handler should also report the err information into the management firmware. MFW can interact with server/motherboard backend agents - these are used by server manufacturers to monitor server HW health. Thus, it is important for driver to report on any faulty conditions Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: invoke err notify on critical areasIgor Russkikh5-14/+35
In a number of critical places not only debug trace should be printed, but the appropriate hw error condition should be raised and error handling/recovery should start. Introduce our new qed_hw_err_notify invocation in these places to record and indicate critical error conditions in hardware. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: add hw err scheduled handlerIgor Russkikh2-2/+106
qede (ethernet level driver) registers a callback handler. This handler maintains eth dev state flags/bits to track error processing. It implements in place processing part for nonsleeping context (WARN_ON trigger), and a deferred (delayed work) part which triggers recovery process for recoverable errors. In later patches this atomic handler will come with more meat. We introduce err_flags on ethdevice structure, its being used to record error handling properties. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: adding hw_err states and handlingIgor Russkikh5-0/+90
Here we introduce qed device error tracking flags and error types. qed_hw_err_notify is an entrace point to report errors. It'll notify higher level drivers (qede/qedr/etc) to handle and recover the error. List of posible errors comes from hardware interfaces, but could be extended in future. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove unnecessary frag list checking in hns3_nic_net_xmit()Huazhong Tan1-4/+1
The skb_has_frag_list() in hns3_nic_net_xmit() is redundant, since skb_walk_frags() includes this checking implicitly. Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove some unused macrosHuazhong Tan1-17/+0
There are some macros defined in hns3_enet.h, but not used in anywhere. Reported-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify an incorrect error log in hclge_mbx_handler()Huazhong Tan1-1/+1
When handling HCLGE_MBX_GET_LINK_STATUS, PF will return the link status to the VF, so the error log of hclge_get_link_info() is incorrect. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove a duplicated printing in hclge_configure()Huazhong Tan1-3/+1
Since hclge_get_cfg() already has error print, so hclge_configure() should not print error when calling hclge_get_cfg() fail. Reported-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify some incorrect spellingHuazhong Tan2-8/+8
This patch modifies some incorrect spelling. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14r8152: Use MAC address from device tree if availableThierry Reding1-9/+13
If a MAC address was passed via the device tree node for the r8152 device, use it and fall back to reading from EEPROM otherwise. This is useful for devices where the r8152 EEPROM was not programmed with a valid MAC address, or if users want to explicitly set a MAC address in the bootloader and pass that to the kernel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14selftests: fix flower parent qdiscVlad Buslov2-6/+6
Flower tests used to create ingress filter with specified parent qdisc "parent ffff:" but dump them on "ingress". With recent commit that fixed tcm_parent handling in dump those are not considered same parent anymore, which causes iproute2 tc to emit additional "parent ffff:" in first line of filter dump output. The change in output causes filter match in tests to fail. Prevent parent qdisc output when dumping filters in flower tests by always correctly specifying "ingress" parent both when creating and dumping filters. Fixes: a7df4870d79b ("net_sched: fix tcm_parent in tc filter dump") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: dsa: mt7530: set CPU port to fallback modeDENG Qingfang2-3/+14
Currently, setting a bridge's self PVID to other value and deleting the default VID 1 renders untagged ports of that VLAN unable to talk to the CPU port: bridge vlan add dev br0 vid 2 pvid untagged self bridge vlan del dev br0 vid 1 self bridge vlan add dev sw0p0 vid 2 pvid untagged bridge vlan del dev sw0p0 vid 1 # br0 cannot send untagged frames out of sw0p0 anymore That is because the CPU port is set to security mode and its PVID is still 1, and untagged frames are dropped due to VLAN member violation. Set the CPU port to fallback mode so untagged frames can pass through. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: mvneta: speed down the PHY, if WoL used, to save energyDaniel González Cabanelas1-0/+11
Some PHYs connected to this ethernet hardware support the WoL feature. But when WoL is enabled and the machine is powered off, the PHY remains waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of energy. Slow down the PHY speed before stopping the ethernet if WoL is enabled, and save some energy while the machine is powered off or sleeping. Tested using an Armada 370 based board (LS421DE) equipped with a Marvell 88E1518 PHY. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13sfc: fix dereference of table before it is null checkedColin Ian King1-4/+1
Currently pointer table is being dereferenced on a null check of table->must_restore_filters before it is being null checked, leading to a potential null pointer dereference issue. Fix this by null checking table before dereferencing it when checking for a null table->must_restore_filters. Addresses-Coverity: ("Dereference before null check") Fixes: e4fe938cff04 ("sfc: move 'must restore' flags out of ef10-specific nic_data") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: phy: at803x: add cable diagnostics supportMichael Walle1-0/+176
The AR8031/AR8033 and the AR8035 support cable diagnostics. Adding driver support is straightforward, so lets add it. The PHY just do one pair at a time, so we have to start the test four times. The cable_test_get_status() can block and therefore we can just busy poll the test completion and continue with the next pair until we are done. The time delta counter seems to run at 125MHz which just gives us a resolution of about 82.4cm per tick. 100m cable, A/B/C/D open: Cable test started for device eth0. Cable test completed for device eth0. Pair: Pair A, result: Open Circuit Pair: Pair A, fault length: 107.94m Pair: Pair B, result: Open Circuit Pair: Pair B, fault length: 104.64m Pair: Pair C, result: Open Circuit Pair: Pair C, fault length: 105.47m Pair: Pair D, result: Open Circuit Pair: Pair D, fault length: 107.94m 1m cable, A/B connected, C shorted, D open: Cable test started for device eth0. Cable test completed for device eth0. Pair: Pair A, result: OK Pair: Pair B, result: OK Pair: Pair C, result: Short within Pair Pair: Pair C, fault length: 0.82m Pair: Pair D, result: Open Circuit Pair: Pair D, fault length: 0.82m Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13ipv6: set msg_control_is_user in do_ipv6_getsockoptChristoph Hellwig1-0/+1
While do_ipv6_getsockopt does not call the high-level recvmsg helper, the msghdr eventually ends up being passed to put_cmsg anyway, and thus needs msg_control_is_user set to the proper value. Fixes: 1f466e1f15cf ("net: cleanly handle kernel vs user buffers for ->msg_control") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: phy: bcm54140: add cable diagnostics supportMichael Walle1-0/+3
Use the generic cable tester functions from bcm-phy-lib to add cable tester support. 100m cable, A/B/C/D open: Cable test started for device eth0. Cable test completed for device eth0. Pair: Pair A, result: Open Circuit Pair: Pair B, result: Open Circuit Pair: Pair C, result: Open Circuit Pair: Pair D, result: Open Circuit Pair: Pair A, fault length: 106.60m Pair: Pair B, fault length: 103.32m Pair: Pair C, fault length: 104.96m Pair: Pair D, fault length: 106.60m 1m cable, A/B connected, pair C shorted, D open: Cable test started for device eth0. Cable test completed for device eth0. Pair: Pair A, result: OK Pair: Pair B, result: OK Pair: Pair C, result: Short within Pair Pair: Pair D, result: Open Circuit Pair: Pair C, fault length: 0.82m Pair: Pair D, fault length: 1.64m 1m cable, A/B connected, pair C shorted with D: Cable test started for device eth0. Cable test completed for device eth0. Pair: Pair A, result: OK Pair: Pair B, result: OK Pair: Pair C, result: Short to another pair Pair: Pair D, result: Short to another pair Pair: Pair C, fault length: 1.64m Pair: Pair D, fault length: 1.64m The granularity of the length measurement seems to be 82cm. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: phy: broadcom: add cable test supportMichael Walle3-0/+247
Most modern broadcom PHYs support ECD (enhanced cable diagnostics). Add support for it in the bcm-phy-lib so they can easily be used in the PHY driver. There are two access methods for ECD: legacy by expansion registers and via the new RDB registers which are exclusive. Provide functions in two variants where the PHY driver can choose from. To keep things simple for now, we just switch the register access to expansion registers in the RDB variant for now. On the flipside, we have to keep a bus lock to prevent any other non-legacy access on the PHY. The results of the intra-pair tests are inconclusive (at least for the BCM54140). Most of the times half the length is reported but sometimes the length is correct. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13net: phy: broadcom: add bcm_phy_modify_exp()Michael Walle2-0/+34
Add the convenience function to do a read-modify-write. This has the additional benefit of saving one write to the selection register. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.