aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/accel
AgeCommit message (Collapse)AuthorFilesLines
2024-10-12accel/qaic: Fix the for loop used to walk SG tablePranjal Ramajor Asha Kanojiya2-4/+4
Only for_each_sgtable_dma_sg() should be used to walk through a SG table to grab correct bus address and length pair after calling DMA MAP API on a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg() walks through the original SG table. Fixes: ff13be830333 ("accel/qaic: Add datapath") Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
2024-10-12accel/qaic: Add AIC080 supportJeffrey Hugo1-1/+3
Add basic support for the new AIC080 product. The PCIe Device ID is 0xa080. AIC080 is a lower cost, lower performance SKU variant of AIC100. From the qaic perspective, it is the same as AIC100. Reviewed-by: Troy Hanson <quic_thanson@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004195209.3910996-1-quic_jhugo@quicinc.com
2024-10-12accel/qaic: Add ipc_router channelJeffrey Hugo1-0/+32
The ipc_router channel allows AF_QIPCRTR clients and services to communicate with the AIC100 device. The ipc_router MHI transport layer expects the channel to be named exactly "IPCR". Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004164033.3825986-1-quic_jhugo@quicinc.com
2024-10-11accel/ivpu: Update power island delaysKarol Wachowski2-17/+34
Apply Hardware Architecture Specification compatible delays for main island power delivery for 50xx and above. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-3-maciej.falkowski@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add initial Panther Lake supportMaciej Falkowski3-3/+11
Add support for the 5th generation of Intel NPU that is going to be present in PTL_P (Panther Lake) CPUs. NPU5 code reuses almost all of previous driver code. Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004162505.1695605-2-maciej.falkowski@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix typos in ivpu_pm.cJacek Lawrynowicz1-2/+2
Replace "Filed" with an actual word. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-32-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add tracing for IPC/PM/JOBJakub Pawlak6-1/+102
Add multiple trace points in couple of key places to enable tracing with ftrace. Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-31-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove HWS_EXTRA_EVENTS from test modesJacek Lawrynowicz2-3/+0
IVPU_TEST_MODE_HWS_EXTRA_EVENTS was never used and can be safely removed Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-30-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix ivpu_jsm_dyndbg_control()Jacek Lawrynowicz1-1/+1
Use correct channel for dyndbg JSM message. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-29-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Increase MS info buffer sizeJacek Lawrynowicz1-1/+1
Increase MS info BO to 64KB to allow collecting more metrics. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-28-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Use whole user and shave ranges for preemption buffersKarol Wachowski1-9/+4
Do not restrict range for preemption buffers allocation just to the end of user and shave ranges, use them whole instead to avoid situation where end of range might be already allocated causing preemption buffers allocation to fail. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-27-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Do not fail on cmdq if failed to allocate preemption buffersKarol Wachowski1-11/+16
Allow to proceed with job command queue creation even if preemption buffers failed to be allocated, print warning that preemption on such command queue will be disabled. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-26-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove invalid warningsJacek Lawrynowicz2-3/+0
Warn in ivpu_file_priv_put() checks a pointer that is previously accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases where IPC is disabled upon closing the device. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor failure diagnostics during bootKarol Wachowski1-6/+11
Move diagnostic functions to common error handling within ivpu_boot() function to ensure diagnostics are gathered even in cases where NPU fails after successful boot (DCT and HWS init failures). Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-24-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Prevent recovery invocation during probe and resumeKarol Wachowski3-38/+23
Refactor IPC send and receive functions to allow correct handling of operations that should not trigger a recovery process. Expose ivpu_send_receive_internal(), which is now utilized by the D0i3 entry, DCT initialization, and HWS initialization functions. These functions have been modified to return error codes gracefully, rather than initiating recovery. The updated functions are invoked within ivpu_probe() and ivpu_resume(), ensuring that any errors encountered during these stages result in a proper teardown or shutdown sequence. The previous approach of triggering recovery within these functions could lead to a race condition, potentially causing undefined behavior and kernel crashes due to null pointer dereferences. Fixes: 45e45362e095 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix reset_engine debugfs file logicAndrzej Kacprowski1-34/+8
The current reset_engine implementation unconditionally resets all engines. Improve implementation to reset only the engine requested by the user space to allow more granular testing. Also use DEFINE_DEBUGFS_ATTRIBUTE() to simplify implementation. Same changes applied to resume_engine debugfs file for consistency. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-22-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove skip of clock own resource ack on SimicsKarol Wachowski1-3/+0
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal was implemented as part of VPU STATUS register and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add test_mode bit to force turboAndrzej Kacprowski2-0/+6
Add new test_mode BIT(9) that forces firmware to enable turbo burst mode. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Make DB_ID and JOB_ID allocations incrementalTomasz Rusinowicz3-10/+43
Save last used ID and use it to limit the possible values for the ID. This should decrease the rate at which the IDs are reused, which will make debugging easier. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Print JSM message result in case of errorKarol Wachowski1-1/+1
Change debug message to error level in case of receiving non-successful result of JSM message. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add auto selection logic for job schedulerJacek Lawrynowicz8-15/+52
Add ivpu_fw_sched_mode_select() function that can select scheduling mode based on HW and FW versions. This prepares for a switch to HWS on selected platforms. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-17-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add one jiffy to bo_wait_ioctl timeout valueKarol Wachowski1-0/+3
Add one jiffy to ensure wait function never times out before intended timeout value, which could happen if absolute timeout value is less than (1s / CONFIG_HZ) in the future. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Allow reading dvfs_mode debugfs fileAndrzej Kacprowski1-21/+12
Make the dvfs_mode read-write to allow checking current mode. Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove 1-tile power up Simics workaroundKarol Wachowski1-4/+0
Previously Simics was not providing workpoint for configurations with 0 tiles enabled, that had to be worked around in the KMD. This got fixed in Simics and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Stop using hardcoded DRIVER_DATEJacek Lawrynowicz2-5/+11
Hardcoded driver date is useless, so use kernel version as a driver date to make identifying .ko file easier. Also allow to pass DRIVER_DATE on build time to allow versioning the driver in case it is built out of the tree. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW version debugfs entryKarol Wachowski1-0/+9
Add debugfs that prints current firmware version string on read. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-12-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Turn on autosuspend on SimicsKarol Wachowski1-1/+1
With recent Simics update DVFS flows using cdyn were fixed and it is possible to enable D0i3/D3 entry flows on autosuspend. Set autosuspend timeout to 100 ms by default on Simics. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLEKarol Wachowski1-6/+2
Follow HW documentation recommendation of 500 ns delay between setting AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power island enabling. Previously this was only done correctly for VPU 4+. VPU 3.7 had the delay added after power island disable where it is not needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz7-0/+43
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add coredump supportKarol Wachowski7-14/+74
Use coredump (if available) to collect FW logs in case of a FW crash. This makes dmesg more readable and allows to collect more log data. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Limit FW version string lengthJacek Lawrynowicz2-4/+9
Limit FW version string, when parsing FW binary, to 256 bytes and always add NULL-terminate it. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-7-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix fw log printingJacek Lawrynowicz1-17/+32
- Fix empty log detection that couldn't work without read_wrap_count - Start printing wrapped log from correct position (log_start) - Properly handle logs that are wrapped multiple times in reference to reader position - Don't add a newline when log buffer is wrapped - Always add a newline after printing a log buffer in case log does not end with one Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor functions in ivpu_fw_log.cJacek Lawrynowicz3-31/+35
Make function names more consistent and (arguably) readable in fw log code. Add fw_log_print_all_in_bo() that remove duplicated code in ivpu_fw_log_print(). Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-5-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Reset fw log on cold bootTomasz Rusinowicz3-0/+16
Add ivpu_fw_log_reset() that resets the read_index of all FW logs on cold boot so logs are properly read. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Rename ivpu_log_level to fw_log_levelJacek Lawrynowicz3-11/+11
Rename module param ivpu_log_level to fw_log_level, so it is clear what log level is actually changed. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-3-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Update VPU FW API headersAndrzej Kacprowski4-59/+292
This commit bumps: - Boot API from 3.24.0 to 3.26.3 - JSM API from 3.16.0 to 3.25.0 Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-3/+1
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-24accel/ivpu: Fix a typoAndrew Kreimer1-1/+1
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240909135655.45938-1-algonell@gmail.com
2024-09-19Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-3/+1
Pull dma-mapping updates from Christoph Hellwig: - support DMA zones for arm64 systems where memory starts at > 4GB (Baruch Siach, Catalin Marinas) - support direct calls into dma-iommu and thus obsolete dma_map_ops for many common configurations (Leon Romanovsky) - add DMA-API tracing (Sean Anderson) - remove the not very useful return value from various dma_set_* APIs (Christoph Hellwig) - misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reflow dma_supported dma-mapping: reliably inform about DMA support for IOMMU dma-mapping: add tracing for dma-mapping API calls dma-mapping: use IOMMU DMA calls for common alloc/free page calls dma-direct: optimize page freeing when it is not addressable dma-mapping: clearly mark DMA ops as an architecture feature vdpa_sim: don't select DMA_OPS arm64: mm: keep low RAM dma zone dma-mapping: don't return errors from dma_set_max_seg_size dma-mapping: don't return errors from dma_set_seg_boundary dma-mapping: don't return errors from dma_set_min_align_mask scsi: check that busses support the DMA API before setting dma parameters arm64: mm: fix DMA zone when dma-ranges is missing dma-mapping: direct calls for dma-iommu dma-mapping: call ->unmap_page and ->unmap_sg unconditionally arm64: support DMA zone above 4GB dma-mapping: replace zone_dma_bits by zone_dma_limit dma-mapping: use bit masking to check VM_DMA_COHERENT
2024-09-13accel/qaic: Change to use DEFINE_SHOW_ATTRIBUTE macroLonglong Xia1-38/+5
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. No functional change. Signed-off-by: Longlong Xia <xialonglong@kylinos.cn> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240819095816.447096-1-xialonglong@kylinos.cn
2024-08-29dma-mapping: don't return errors from dma_set_max_seg_sizeChristoph Hellwig1-3/+1
A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
2024-08-26accel: Use XArray instead of IDR for minorsMichał Winiarski1-103/+7
Accel minor management is based on DRM (and is also using struct drm_minor internally), since DRM is using XArray for minors, it makes sense to also convert accel. As the two implementations are identical (only difference being the underlying xarray), move the accel_minor_* functionality to DRM. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann22-472/+677
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-15accel/ivpu: Add missing MODULE_FIRMWARE metadataAlexander F. Lent1-0/+4
Modules that load firmware from various paths at runtime must declare those paths at compile time, via the MODULE_FIRMWARE macro, so that the firmware paths are included in the module's metadata. The accel/ivpu driver loads firmware but lacks this metadata, preventing dracut from correctly locating firmware files. Fix it. Fixes: 9ab43e95f922 ("accel/ivpu: Switch to generation based FW names") Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by: Alexander F. Lent <lx@xanderlent.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240709-fix-ivpu-firmware-metadata-v3-1-55f70bba055b@xanderlent.com
2024-06-28Merge tag 'drm-habanalabs-next-2024-06-23' of https://github.com/HabanaAI/drivers.accel.habanalabs.kernel into drm-nextDave Airlie22-472/+677
This tag contains habanalabs driver changes for v6.11. The notable changes are: - uAPI changes: - Use device-name directory in debugfs-driver-habanalabs. - Expose server type in debugfs. - New features and improvements: - Gradual sleep in polling memory macro. - Reduce Gaudi2 MSI-X interrupt count to 128. - Add Gaudi2-D revision support. - Firmware related changes: - Add timestamp to CPLD info. - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error. - Align Gaudi2 interrupt names. - Check for errors after preboot is ready. - Bug fixes and code cleanups: - Move heartbeat work initialization to early init. - Fix a race when receiving events during reset. - Change the heartbeat scheduling point. - Maintainers: - Change habanalabs maintainer and git repo path. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ofir Bitton <obitton@habana.ai> Link: https://patchwork.freedesktop.org/patch/msgid/ZnfIjTH5AYQvPe7n@obitton-vm-u22.habana-labs.com
2024-06-23accel/habanalabs: gradual sleep in polling memory macroDidi Freiman1-2/+9
It’s better to avoid long sleeps right from the beginning of the polling since the data may be available much sooner than the sleep period. Because polling host memory is inexpensive, this change gradually increases the sleep time up to the user-requested period. Signed-off-by: Didi Freiman <dfreiman@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: move heartbeat work initialization to early initTomer Tayar1-2/+4
The device heartbeat work is currently initialized at device_heartbeat_schedule() which is called at the end of hl_device_init(). However hl_device_init() can fail at a previous step, and in such a case, a subsequent call to hl_device_fini() will lead to calling cleanup_resources() and accessing this work uninitialized. As there is no real need to re-initialize this work every time it is rescheduled, move this initialization to device_early_init() to be done once and early enough. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: print timestamp of last PQ heartbeat on EQ heartbeat failureTomer Tayar3-12/+46
The test packet which is sent to FW for the PQ heartbeat is used also as the trigger in FW to send the EQ heartbeat event. Add the time of the last sent packet to the debug info which is printed upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: dump the EQ entries headers on EQ heartbeat failureTomer Tayar3-0/+28
Add a dump of the EQ entries headers upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: revise print on EQ heartbeat failureTomer Tayar1-9/+10
Don't print the "previous EQ index" value in case of a EQ heartbeat failure, because it is incremented along with the EQ CI and therefore redundant. In addition, as the CPU-CP PI is zeroed when it reaches a value that is twice the queue size, add a value of the CI with a similar wrap around, to make it easier to compare the values. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.