aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/devfreq (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30PM / devfreq: Fix the wrong end with semicolonChanwoo Choi1-2/+2
Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix indentaion of devfreq_summary debugfs nodeChanwoo Choi1-7/+4
The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: stable@vger.kernel.org Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Clean up the devfreq instance name in sysfs attrChanwoo Choi1-34/+60
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Add support delayed timer for polling modeChanwoo Choi1-1/+85
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: event: Fix trivial spellingKieran Bingham1-2/+2
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absentMarc Zyngier1-19/+23
Booting a recent kernel on a rk3399-based system (nanopc-t4), equipped with a recent u-boot and ATF results in an Oops due to a NULL pointer dereference. This turns out to be due to the rk3399-dmc driver looking for an *undocumented* property (rockchip,pmu), and happily using a NULL pointer when the property isn't there. Instead, make most of what was brought in with 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") conditioned on finding this property in the device-tree, preventing the driver from exploding. Cc: stable@vger.kernel.org Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Use lockdep asserts instead of manual checks for locked mutexKrzysztof Kozlowski1-10/+7
Instead of warning when mutex_is_locked(), just use the lockdep framework. The code is smaller and checks could be disabled for production environments (it is useful only during development). Put asserts at beginning of function, even before validating arguments. The behavior of update_devfreq() is now changed because lockdep assert will only print a warning, not return with EINVAL. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva1-2/+2
Fix inconsistent IS_ERR and PTR_ERR in imx_bus_init_icc(). The proper pointer to be passed as argument to PTR_ERR() is priv->icc_pdev. This bug was detected with the help of Coccinelle. Fixes: 16c1d2f1b0bd ("PM / devfreq: imx: Register interconnect device") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> [cw00.choi: Edit the patch title from 'imx' to 'imx-bus'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Replace strncpy with strscpyDmitry Osipenko1-1/+1
GCC produces this warning when kernel compiled using `make W=1`: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 772 | strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); The strncpy doesn't take care of NULL-termination of the destination buffer, while the strscpy does. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: imx: Register interconnect deviceLeonard Crestez1-0/+41
There is no single device which can represent the imx interconnect. Instead of adding a virtual one just make the main &noc act as the global interconnect provider. The imx interconnect provider driver will scale the NOC and DDRC based on bandwidth request. More scalable nodes can be added in the future, for example for audio/display/vpu/gpu NICs. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Add generic imx bus scaling driverLeonard Crestez3-0/+147
Add initial support for dynamic frequency switching on pieces of the imx interconnect fabric. All this driver does is set a clk rate based on an opp table, it does not map register areas. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()Markus Elfring1-3/+2
The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: tegra30: Make CPUFreq notifier to take into account boostingDmitry Osipenko1-1/+1
We're taking into account both HW memory-accesses + CPU activity based on current CPU's frequency. For memory-accesses there is a kind of hysteresis in a form of "boosting" which is managed by the tegra30-devfreq driver. If current HW memory activity is higher than activity judged based of the CPU's frequency, then there is no need to schedule cpufreq_update_work because the result of the work will be a NO-OP. And thus, tegra_actmon_cpufreq_contribution() should return 0, meaning that at the moment CPU frequency doesn't contribute anything to the final decision about required memory clock rate. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Fix handling dev_pm_qos_remove_request resultLeonard Crestez1-2/+2
The dev_pm_qos_remove_request function can return 1 if "aggregated constraint value has changed" so only negative values should be reported as errors. Fixes: 27dbc542f651 ("PM / devfreq: Use PM QoS for sysfs min/max_freq") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Fix a typo in a commentChristophe JAILLET1-1/+1
'govenror' was used in place of 'governor' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event nameChanwoo Choi4-11/+11
DEVFREQ_GOV_INTERVAL event indicates that update the interval for polling mode of devfreq device. But, this event name doesn't specify exactly what to do. Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL which specifies what to do by event name. And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL with 'devfreq_' prefix + verb + object as following: - devfreq_interval_update -> devfreq_updatee_interval Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Remove unneeded extern keywordChanwoo Choi1-9/+8
Remove unneeded extern keyword from devfreq-related header file and adjust the indentation of function parameter to keep the consistency in header file Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Use constant name of userspace governorpierre Kuo1-1/+1
Based on commit aa7c352f9841 ("PM / devfreq: Define the constant governor name"), use constant name for userspace governor. Signed-off-by: pierre Kuo <vichy.kuo@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-02-24Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"Orson Zhai1-3/+1
This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14. The name changing as devfreq(X) breaks some user space applications, such as Android HAL from Unisoc and Hikey [1]. The device name will be changed unexpectly after every boot depending on module init sequence. It will make trouble to setup some system configuration like selinux for Android. So we'd like to revert it back to old naming rule before any better way being found. [1] https://lkml.org/lkml/2018/5/8/1042 Cc: John Stultz <john.stultz@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Orson Zhai <orson.unisoc@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-01-16PM / devfreq: Add debugfs support with devfreq_summary fileChanwoo Choi1-0/+82
Add debugfs interface to provide debugging information of devfreq device. It contains 'devfreq_summary' entry to show the summary of registered devfreq devices as following and the additional debugfs file will be added. - /sys/kernel/debug/devfreq/devfreq_summary [Detailed description of each field of 'devfreq_summary' debugfs file] - dev_name : Device name of h/w - dev : Device name made by devfreq core - parent_dev : If devfreq device uses the passive governor, show parent devfreq device name. Otherwise, show 'null'. - governor : Devfreq governor name - polling_ms : If devfreq device uses the simple_ondemand governor, polling_ms is necessary for the period. (unit: millisecond) - cur_freq_Hz : Current frequency (unit: Hz) - min_freq_Hz : Minimum frequency (unit: Hz) - max_freq_Hz : Maximum frequency (unit: Hz) [For example on Exynos5422-based Odroid-XU3 board] $ cat /sys/kernel/debug/devfreq/devfreq_summary dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 [lkp: Reported the build error] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-01-06PM / devfreq: exynos: Rename Exynos to lowercaseKrzysztof Kozlowski6-7/+7
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-31PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERRYueHaibing1-6/+18
Fix inconsistent IS_ERR and PTR_ERR in imx8m_ddrc_probe(). Detected using Coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Add error log when fail to get devfreq-eventYangtao Li1-0/+1
Adding an error log makes it easier to trace the function's error path. Because the error code may be rewritten on return, print error code here. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Disable devfreq-event device when failsYangtao Li1-1/+7
The exynos_bus_profile_init process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Disable devfreq-event device when failsYangtao Li1-5/+13
The probe process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: imx8m-ddrc: Remove unused definesLeonard Crestez1-6/+0
The IMX_SIP_DDR_DVFS_WAIT_CHANGE and IMX_SIP_DDR_FREQ_SET_HIGH defines are not used so they can be removed. Fixes: 518e99e2a22e ("PM / devfreq: Add dynamic scaling for imx8m ddr controller") Reported-by: Shawn Guo <shawn.guo@kernel.org> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Reduce goto statements and remove unused headersArtur Świgoń1-35/+19
Improve code readability by changing the goto statements as well as eliminating a few more goto statements (related to return paths). Moreover, remove unused header file and adds a missing <linux/of.h>. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit patch title and description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependencyChanwoo Choi2-2/+3
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent the build break. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resourceYangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add missing of_node_put()Yangtao Li1-0/+1
of_node_put() needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Add missing of_node_put()Yangtao Li1-0/+1
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Fix multiple kernel-doc warningsRandy Dunlap2-4/+4
Fix kernel-doc warnings in devfreq files. Also fix a typo. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()Artur Świgoń1-28/+42
This patch adds a new exynos_bus_profile_init_passive() extracted from exynos_bus_probe() for devfreq device using passive governor. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that function is for devfreq device using passive governor] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()Artur Świgoń1-44/+58
This patch adds a new exynos_bus_profile_init() extracted from exynos_bus_probe() for devfreq device using simple_ondemand governor like parent devfreq device. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that new function is for parent devfreq device] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)Kamil Konieczny1-1/+1
Declaration of DEVICE_ATTR_RW(min_freq) is placed after function max_freq_store. Move it to the correct place after min_freq_show. Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Move statistics to separate struct devfreq_statsKamil Konieczny1-21/+23
Count time and transitions between devfreq frequencies in separate struct devfreq_stats for improved code readability and maintenance. Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Fix the merge conflict in trasn_stat_store and use 'devfreq->stats.*' style for consistent coding style and restore the clean-up code of 'devfreq->profile->*'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add clearing transitions statsKamil Konieczny1-1/+28
Add clearing transition table and time in states devfreq statistics by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use is like following: echo 0 > /sys/class/devfreq/devfreqX/trans_stat Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> [cw00.choi: Edit return value if entering the wrong value for reset and use arrary3_size() to get the size of 3-dimensional array] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Change time stats to 64-bitKamil Konieczny1-7/+7
Change time stats counting to bigger type by using 64-bit jiffies. This will make devfreq stats code look similar to cpufreq stats and prevents overflow (for HZ = 1000 after 49.7 days). Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add new name attribute for sysfsChanwoo Choi1-0/+9
The commit 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") changed the node name to devfreq(x). After this commit, it is not possible to get the device name through /sys/class/devfreq/devfreq(X)/*. Add new name attribute in order to get device name. Cc: stable@vger.kernel.org Fixes: 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add dynamic scaling for imx8m ddr controllerLeonard Crestez3-0/+476
Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual frequency switching is implemented inside TF-A, this driver wraps the SMC calls and synchronizes the clk tree. The DRAM clocks on imx8m have the following structure (abridged): +----------+ |\ +------+ | dram_pll |-------|M| dram_core | | +----------+ |U|---------->| D | /--|X| | D | dram_alt_root | |/ | R | | | C | +---------+ | | |FIX DIV/4| | | +---------+ | | composite: | | | +----------+ | | | | dram_alt |----/ | | +----------+ | | | dram_apb |-------------------->| | +----------+ +------+ The dram_pll is used for higher rates and dram_alt is used for lower rates. The dram_alt and dram_apb clocks are "imx composite" and their parent can also be modified. This driver will prepare/enable the new parents ahead of switching (so that the expected roots are enabled) and afterwards it will call clk_set_parent to ensure the parents in clock framework are up-to-date. The driver relies on dram_pll dram_alt and dram_apb being marked with CLK_GET_RATE_NOCACHE for rate updates. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [cw00.choi: Edit the COMPILE_TEST module dependency in Kconfig] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Fix Kconfig indentationKrzysztof Kozlowski1-3/+3
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-ppmu: Fix excessive stack usageArnd Bergmann1-5/+8
Putting a 'struct devfreq_event_dev' object on the stack is generally a bad idea and here it leads to a warnig about potential stack overflow: drivers/devfreq/event/exynos-ppmu.c:643:12: error: stack frame size of 1040 bytes in function 'exynos_ppmu_probe' [-Werror,-Wframe-larger-than=] There is no real need for the device structure, only the string inside it, so add an internal helper function that simply takes the string as its argument and remove the device structure. Fixes: 1dd62c66d345 ("PM / devfreq: events: extend events by type of counted data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [cw00.choi: Fix the issue from 'desc->name' to 'desc[j].name'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-23PM / devfreq: tegra: Add COMMON_CLK dependencyArnd Bergmann1-0/+1
Compile-testing this driver fails if CONFIG_COMMON_CLK is not set: drivers/devfreq/tegra30-devfreq.o: In function `tegra_devfreq_target': tegra30-devfreq.c:(.text+0x164): undefined reference to `clk_set_min_rate' Fixes: 35f8dbc72721 ("PM / devfreq: tegra: Enable COMPILE_TEST for the driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-23PM / devfreq: Drop explicit selection of PM_OPPLeonard Crestez1-4/+0
CONFIG_PM_OPP is already selected by CONFIG_PM_DEVFREQ since commit b9c69e043266 ("PM / devfreq: Add dependency on PM_OPP"). This means that individual drivers shouldn't "select PM_OPP" explicitly. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [cw00.choi: Edit the patch title] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Use PM QoS for sysfs min/max_freqLeonard Crestez1-17/+59
Switch the handling of min_freq and max_freq from sysfs to use the dev_pm_qos_request interface. Since PM QoS handles frequencies as kHz this change reduces the precision of min_freq and max_freq. This shouldn't introduce problems because frequencies which are not an integer number of kHz are likely not an integer number of Hz either. Try to ensure compatibility by rounding min values down and rounding max values up. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Add PM QoS supportLeonard Crestez1-0/+77
Register notifiers with the PM QoS framework in order to respond to requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY. No notifiers are added by this patch but PM QoS constraints can be imposed externally (for example from other devices). Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Don't fail devfreq_dev_release if not in listLeonard Crestez1-5/+1
Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Introduce get_freq_range helperLeonard Crestez1-48/+60
Moving handling of min/max freq to a single function and call it from update_devfreq and for printing min/max freq values in sysfs. This changes the behavior of out-of-range min_freq/max_freq: clamping is now done at evaluation time. This means that if an out-of-range constraint is imposed by sysfs and it later becomes valid then it will be enforced. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Set scaling_max_freq to max on OPP notifier errorLeonard Crestez1-1/+3
The devfreq_notifier_call functions will update scaling_min_freq and scaling_max_freq when the OPP table is updated. If fetching the maximum frequency fails then scaling_max_freq remains set to zero which is confusing. Set to ULONG_MAX instead so we don't need special handling for this case in other places. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Fix devfreq_notifier_call returning errnoLeonard Crestez1-11/+13
Notifier callbacks shouldn't return negative errno but one of the NOTIFY_OK/DONE/BAD values. The OPP core will ignore return values from notifiers but returning a value that matches NOTIFY_STOP_MASK will stop the notification chain. Fix by always returning NOTIFY_OK. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.