Age | Commit message (Collapse) | Author | Files | Lines |
|
drm-misc-next for v6.15:
UAPI Changes:
fourcc:
- Add modifiers for MediaTek tiled formats
Cross-subsystem Changes:
bus:
- mhi: Enable image transfer via BHIe in PBL
dma-buf:
- Add fast-path for single-fence merging
Core Changes:
atomic helper:
- Allow full modeset on connector changes
- Clarify semantics of allow_modeset
- Clarify semantics of drm_atomic_helper_check()
buddy allocator:
- Fix multi-root cleanup
ci:
- Update IGT
display:
- dp: Support Extendeds Wake Timeout
- dp_mst: Fix RAD-to-string conversion
panic:
- Encode QR code according to Fido 2.2
probe helper:
- Cleanups
scheduler:
- Cleanups
ttm:
- Refactor pool-allocation code
- Cleanups
Driver Changes:
amdxdma:
- Fix error handling
- Cleanups
ast:
- Refactor detection of transmitter chips
- Refactor support of VBIOS display-mode handling
- astdp: Fix connection status; Filter unsupported display modes
bridge:
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- sn65dsi86: Fix device IDs
- Cleanups
i915:
- Enable Extendeds Wake Timeout
imagination:
- Check job dependencies with DRM-sched helper
ivpu:
- Improve command-queue handling
- Use workqueue for IRQ handling
- Add suport for HW fault injection
- Locking fixes
- Cleanups
mgag200:
- Add support for G200eH5 chips
msm:
- dpu: Add concurrent writeback support for DPU 10.x+
nouveau:
- Move drm_slave_encoder interface into driver
- nvkm: Refactor GSP RPC
omapdrm:
- Cleanups
panel:
- Convert several panels to multi-style functions to improve error
handling
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Cleanups
qaic:
- Add support for AIC200
- Cleanups
renesas:
- Fix limits in DT bindings
rockchip:
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- Cleanups
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
xlnx:
- Set correct DMA segment size
- Fix error handling
- Fix docs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212090625.GA24865@linux.fritz.box
|
|
Use DRM's device wedged event to notify userspace that a reset had
happened. For now, only use `none` method meant for telemetry
capture.
In the future we might want to report a recovery method if the reset didn't
succeed.
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-6-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This commit introduces enhancements to the handling of the cleaner
shader fence in the AMDGPU MES driver:
- The MES (Microcode Execution Scheduler) now sends a PM4 packet to the
KIQ (Kernel Interface Queue) to request the cleaner shader, ensuring
that requests are handled in a controlled manner and avoiding the
race conditions.
- The CP (Compute Processor) firmware has been updated to use a private
bus for accessing specific registers, avoiding unnecessary operations
that could lead to issues in VF (Virtual Function) mode.
- The cleaner shader fence memory address is now set correctly in the
`mes_set_hw_res_pkt` structure, allowing for proper synchronization of
the cleaner shader execution.
Cc: Christian König <christian.koenig@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Curret kfd does not allocate pasid values, instead uses pasid value for each
vm from graphic driver. So should not prevent graphic driver from releasing
pasid values since the values are allocated by graphic driver, not kfd driver
anymore. This patch does not stop graphic driver release pasid values.
Fixes: 8544374c0f82 ("drm/amdkfd: Have kfd driver use same PASID values from graphic driver")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TMZ support is enabled for vcn on GC IP 11_5_0
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit introduces enhancements to the handling of the cleaner
shader fence in the AMDGPU MES driver:
- The MES (Microcode Execution Scheduler) now sends a PM4 packet to the
KIQ (Kernel Interface Queue) to request the cleaner shader, ensuring
that requests are handled in a controlled manner and avoiding the
race conditions.
- The CP (Compute Processor) firmware has been updated to use a private
bus for accessing specific registers, avoiding unnecessary operations
that could lead to issues in VF (Virtual Function) mode.
- The cleaner shader fence memory address is now set correctly in the
`mes_set_hw_res_pkt` structure, allowing for proper synchronization of
the cleaner shader execution.
Cc: lin cao <lin.cao@amd.com>
Cc: Jingwen Chen <Jingwen.Chen2@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes drm/amd/amdgpu version 11.5.2
Signed-off-by: YING LI <yingli12@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SVM migration unmap pages from GPU and then update mapping to GPU to
recover page fault. Currently unmap clears the PDE entry for range
length >= huge page and free PTB bo, update mapping to alloc new PT bo.
There is race bug that the freed entry bo maybe still on the pt_free
list, reused when updating mapping and then freed, leave invalid PDE
entry and cause GPU page fault.
By setting the update to clear only one PDE entry or clear PTB, to
avoid unmap to free PTE bo. This fixes the race bug and improve the
unmap and map to GPU performance. Update mapping to huge page will
still free the PTB bo.
With this change, the vm->pt_freed list and work is not needed. Add
WARN_ON(unlocked) in amdgpu_vm_pt_free_dfs to catch if unmap to free the
PTB.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's GPU page size not CPU page size. In most cases they
are the same, but not always. This can lead to overallocation
on systems with larger pages.
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split the code on a per instance basis. This will allow
us to use the per instance functions in the future to
handle more things per instance.
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA writes has to probe invalidate RW lines. Set snoop bit in mmhub for
this to happen.
v2: Missed a few mmhub_v9_4. Added now.
v3: Calculate hub offset once since it doesn't change inside the loop
Modified function names based on review comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add discovery entry for DCN IP version 3.6.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reset psp->cmd to NULL after releasing the buffer in function psp_sw_fini().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add extra flag definition for ids_flag field to distinguish
between vf/pf/pt modes
v2: Updated kms driver minor version & removed pf check as default is 0
v3: Fix up version (Alex)
v4: rebase (Alex)
Proposed userspace:
https://github.com/ROCm/amdsmi/commit/e663bed7d6b3df79f5959e73981749b1f22ec698
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the user has configured a large carveout on a small APU,
only use GTT for VRAM allocations if GTT is larger than
VRAM.
v2: fix reversed check (Philip)
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On big and small APUs we send KFD VRAM allocations to GTT
since the carve out is either non-existent or relatively
small. However, if someone sets the carve out size to be
relatively large, we may end up using GTT rather than VRAM.
No change of logic with this patch, but it allows the
driver to determine which logic to use based on the
carve out size in the future.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keep VBIOS image read optional for select SOCs in passthrough mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Certain SOCs may not need much data from VBIOS. Some data like VBIOS
version used will be missed but it doesn't affect functionality. Add a
flag to make VBIOS image optional.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of read_bios, use get_bios_flags to get various options around
reading VBIOS.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use bios_release wrapper to release memory allocated for vbios image and
reset the variables.
v2:
Use the same wrapper for clean up in sw_fini (Alex Deucher)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use amdgpu_gfx_off_ctrl_immediate() when powergating.
There's no need for the delay in gfx off allow. The
powergating is dynamically disabled/enabled as for
RV/PCO on compute queues and allowing gfx off again as
soon the job is submitted improves power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Same as amdgpu_gfx_off_ctrl(), but without the delay
for gfxoff disallow.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
atom bios header files are not required in these files.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 4.x is not part of the GFX power domain so this is
not necessary.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG5_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG2_5_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG2_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG3_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_5
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG5_0_1
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_3
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add devcoredump helper functions that can be reused for all jpeg versions.
V2: (Lijo)
- add amdgpu_jpeg_reg_dump_init() and amdgpu_jpeg_reg_dump_fini()
- use reg_list and reg_count from init() to dump and print registers
- memory allocation and freeing is moved to the init() and fini()
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini()
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make psp_vbflash_status and psp_vbflash available in sysfs
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an inline function to calculate core specific register offsets for
JPEG v4.0.3 and reuse it, makes code more readable and easier to align.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean up some IP version checks in gmcv9.0
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unnecessary IP version checks for GFX 9.4.3 and similar variants.
Wrap checks inside meaningful function.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
IP tables with version <=2 may use harvest bit. For version 3 and above,
harvest bit is not applicable, instead uses harvest table. Fix the
logic accordingly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use IP instance number and hwid as function args for validation checks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX10.1.1/10.1.2 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.1.1/10.1.2 GPUs,
previously available for GFX10.1.10. It enhances security by clearing
GPU memory between processes and maintains a consistent GPU state across
KGD and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Consolidate PM4 definitions. Most of these were previously
only defined in UMDs. Add them here as well and sync with
latest packets. Also no need to include soc15d.h on gfx10+.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Suggested-by: Saurabh Verma <saurabh.verma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit adds the cleaner shader microcode for GFX10.1.0 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_10_1_0_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This addition is part of the cleaner shader feature implementation. The
cleaner shader feature helps resource utilization by cleaning up GPU
resources after they are used. It also enhances security and reliability
by preventing data leaks between workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VFs are not able to query error counts for all RAS blocks. Rather than
returning error for queries on these blocks, skip sysfs the creation
all together.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver's behavior varies based on
the configuration of amdgpu_bad_page_threshold setting
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When not set `gttsize` module parameter by default will get the
value to use for the GTT pool from the TTM page limit, which is
set by a separate module parameter.
This inevitably leads to people not sure which one to set when they
want more addressable memory for the GPU, and you'll end up seeing
instructions online saying to set both.
Add some messages to try to guide people both who are using or misusing
the parameters and mark the parameter as deprecated with the plan to
drop it after the next LTS kernel release.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GPU suspend is aborted, do the same for dGPU as APU to reset
soc15 asic. Otherwise it may cause following errors:
[ 547.229463] amdgpu 0001:81:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
[ 555.126827] amdgpu 0000:0a:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
[ 555.126901] [drm:amdgpu_gfx_enable_kcq [amdgpu]] *ERROR* KCQ enable failed
[ 555.126957] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <gfx_v9_4_3> failed -110
[ 555.126959] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
[ 555.126965] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -110
[ 555.126966] PM: Device 0000:0a:00.0 failed to resume async: error -110
This fix has been tested on Mi308X.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Tested-by: Shuo Liu <shuox.liu@linux.alibaba.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/2462b4b12eb9d025e82525178d568cbaa4c223ff.1736739303.git.gerry@linux.alibaba.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|