| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When switching to drm_edid, we slightly changed how to get edid by
removing the possibility of getting them from dc_link when in aux
transaction mode. As MST doesn't initialize the connector with
`drm_connector_init_with_ddc()`, restore the original behavior to avoid
functional changes.
v2:
- Fix build warning of unchecked dereference (kernel test bot)
CC: Alex Hung <alex.hung@amd.com>
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Roman Li <Roman.Li@amd.com>
CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81262b1656feb3813e3d917ab78824df6831e69e)
|
|
Re-send the mes message on resume to make sure the
mes state is up to date.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 27b791514789844e80da990c456c2465325e0851)
|
|
This should not be called on chips without MES so check if
MES is enabled and if the cleaner shader is supported.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
(cherry picked from commit 80513e389765c8f9543b26d8fa4bbdf0e59ff8bc)
|
|
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d)
Cc: stable@vger.kernel.org
|
|
When userspace applications call AMDKFD_IOC_UPDATE_QUEUE. Preserve
bitfields that do not need to be modified as they contain flags to
track queue states that are used by CP FW.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8150827990b709ab5a40c46c30d21b7f7b9e9440)
Cc: stable@vger.kernel.org
|
|
resume and irq handler happily races in set_power_state()
* amdgpu_legacy_dpm_compute_clocks() needs lock
* protect irq work handler
* fix dpm_enabled usage
v2: fix clang build, integrate Lijo's comments (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2524
Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> # on Oland PRO
Signed-off-by: chr[] <chris@rudorff.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ee3dc9e204d271c9c7a8d4d38a0bce4745d33e71)
Cc: stable@vger.kernel.org
|
|
Increase it since a cper ring is introduced.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the kdoc for the following VCN idle check functions by updating
the parameter description from 'handle' to 'ip_block':
- vcn_v4_0_is_idle
- vcn_v4_0_3_is_idle
- vcn_v4_0_5_is_idle
- vcn_v5_0_1_is_idle
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_1.c:935: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_1_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_1.c:935: warning: Excess function parameter 'handle' description in 'vcn_v5_0_1_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:1972: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:1972: warning: Excess function parameter 'handle' description in 'vcn_v4_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1583: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_3_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1583: warning: Excess function parameter 'handle' description in 'vcn_v4_0_3_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1200: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1200: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1460: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_5_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1460: warning: Excess function parameter 'handle' description in 'vcn_v4_0_5_is_idle'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise an uninitialized value can be returned if
amdgpu_res_cleared returns true for all regions.
Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
save only one record to save eeprom space,and
bad_page_num = pa_rec_num + mca_rec_num*16
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bad page adding can be simpler with nps info
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get metrics table version for smu_v13_0_12 and populate pm_metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Added `sdma_v4_4_2_update_reset_mask` function to update the reset mask.
- update the sysfs reset mask to the `late_init` stage to ensure that the SMU initialization
and capability setup are completed before checking the SDMA reset capability.
- For IP versions 9.4.3 and 9.4.4, enable per-queue reset if the MEC firmware version is at least 0xb0 and PMFW supports queue reset.
- Add a TODO comment for future support of per-queue reset for IP version 9.5.0.
This change ensures that per-queue reset is only enabled when the MEC and PMFW support it.
v2: fix ip version (9.5.4 -> 9.5.0)(Lijo)
Suggested-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Setting cper.enabled to be true only after cper ring is successfully
created.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
nps info saved together with bad page makes bad page parsing more efficient
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of CPER disabled, generating CPER will cause kernel NULL
pointer dereference without checking.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
display performance level when set not supported
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Deprecate KFD XGMI peer info calls in favour of calling directly from
simplified XGMI peer info functions.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Even though GWS no longer exists, to maintain runtime usage for
cooperative launch, SW set legacy GWS size.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Disable PSR-SU on eDP panels
- Fix HPD after GPU reset
- Fixes on dcn4x init, DML2 state policy on DCN36
- Various minor logic fixes
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DC is not using amdgpu_irq_get/put to manage the HPD interrupt refcounts.
So when amdgpu_irq_gpu_reset_resume_helper() reprograms all of the IRQs,
HPD gets disabled.
[How]
Use amdgpu_irq_get/put() for HPD init/fini in DM in order to sync refcounts
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Transitioning from low to high resolutions at high refresh rates caused grey corruption.
During the transition state, there is a period where plane size is based on low resultion
state and ODM slices are based on high resoultion state, causing the entire plane to be
contained in one ODM slice. DML2 would turn off the pipe for the ODM slice with no plane,
causing an underflow since the pixel rate for the higher resolution cannot be supported on
one pipe. This change stops DML2 from turning off pipes that are mapped to an ODM slice
with no plane. This is possible to do without negative consequences because pipes can now
take the minimum viewport and draw with zero recout size, removing the need to have the
pipe turned off.
[How]
In map_pipes_from_plane(), remove "check" that skips ODM slices that are not covered by
the plane. This prevents the pipes for those ODM slices from being freed.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If we soft reset before halt finishes and there are outstanding
memory transactions then the memory interface may produce unexpected
results, such as out of order transactions when the firmware next runs.
These can manifest as random or unexpected load/store violations.
[How]
Increase the timeout before soft reset to ensure the DMCUB has quiesced.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Removes unused header
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
If max_downscale_src_width check fails, we exit early from TAP calculation and left a NULL
value to the scaling data structure to cause the zero divide in the DML validation.
[HOW]
Call set default TAP calculation before early exit in get_optimal_number_of_taps due to
max downscale limit exceed.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Previously the 128b/132b LTTPR support DPCD field was used to decide if
FIXED_VS training sequence required a rate toggle before initiating LT.
When running DP2.1 4.9.x.x compliance tests, emulated LTTPRs can report
no-128b/132b support which is then forwarded by the FIXED_VS retimer.
As a result this test exposes the rate toggle again, erroneously causing
failures as certain compliance sinks don't expect this behaviour.
[HOW]
Add new DPCD register defines/reads to read LTTPR IEEE OUI and device ID.
Decide whether to perform the rate toggle based on the LTTPR's IEEE OUI
which guarantees that we only perform the toggle on affected retimers.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
failed due to cmdtable not created.
switch atombios cmdtable as default.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With HostVM enabled, DCN31 fails to pass validation for 3x4k60. Some Linux
userspace does not downgrade one of the monitors to 4k30, and the result
is that the monitor does not light up. Disable it until the bandwidth
calculation failure is resolved.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We must implement an ACPI re-timer programming interface and notify
ACPI driver whenever a PHY transition is about to take place.
Because some trace lengths on certain platforms are very long,
then a re-timer may need to be programmed whenever a PHY transition
takes place. The implementation of this re-timer programming interface
will notify ACPI driver that PHY transition is taking place and it
will trigger the re-timer as needed.
First we need to gather retimer information from ACPI interface.
Then, in the PRE case, the re-timer interface needs to be called before we call
transmitter ENABLE.
In the POST case, it has to be called after we call transmitter DISABLE.
[How]
Implemented ACPI retimer programming interface.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Refactor existing code related to DCN4x for better code sharing with
other modules.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
some board designs have eDP0 connected to DP1, need a way to enable
support_edp0_on_dp1 flag, otherwise edp related features cannot work
[how]
do a dmi check during dm initialization to identify systems that
require support_edp0_on_dp1. Optimize quirk table with callback
functions to set quirk entries, retrieve_dmi_info can set quirks
according to quirk entries
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yilin Chen <Yilin.Chen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
replace dio encoder access to work with new dio encoder
assignment.
[HOW}
1. before validation, access dio encoder by get_temp_dio_link_enc()
2. after validation, access dio encoder through pipe_ctx->link_res
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In order to avoid component conflicts, spl namespace is needed.
[How]
Adding SPL namespace to the public API os that each user of SPL can have
their own namespace.
Signed-off-by: Navid Assadian <Navid.Assadian@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some of unit tests use large scaling ratio such that when we
calculate optimal number of taps, max_taps is negative.
Then in recent change, we changed max_taps to uint instead
of int so now max_taps wraps and is positive. This change
changed the behaviour from returning back false to return
true and breaks unit test check
[How]
Add check to prevent max_taps from wrapping and set to 0
instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IDENTITY_RATIO check uses 2 bits for integer, which only allows
checking downscale ratios up to 3. But we support up to 6x
downscale
[How]
Update IDENTITY_RATIO to check 3 bits for integer
Add ASSERT to catch if we downscale more than 6x
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mismatch type comparison/assignment may cause data loss. Since the
values are always non-negative, it is safe to use unsigned variables to
resolve the mismatch.
Signed-off-by: Navid Assadian <navid.assadian@amd.com>
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For subsampled YUV output formats, more pixels can get fetched and be
used for scaling.
[How]
Add the adjustment to the calculated recout, so the viewport covers the
corresponding pixels on the source plane.
Signed-off-by: Navid Assadian <Navid.Assadian@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Passing uint into uchar function param. Pass uint instead
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN36 should inherit the same policy as DCN35 for DML2.
[How]
Add it to the list of checks in translation helper.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
Fix the incorrect value of the cursor_buffer_size.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
PSR-SU may cause some glitching randomly on several panels.
[How]
Temporarily disable the PSR-SU and fallback to PSR1 for
all eDP panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3388
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit c31b41f1cb32450d8ac176eef9bda979760040e7.
We planning to disable the PSR-SU and fallback to PSR1 for
all eDP panels not only for specific eDP panel temporarily.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in max_oustanding_when_urgent_expected,
fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When switching to drm_edid, we slightly changed how to get edid by
removing the possibility of getting them from dc_link when in aux
transaction mode. As MST doesn't initialize the connector with
`drm_connector_init_with_ddc()`, restore the original behavior to avoid
functional changes.
v2:
- Fix build warning of unchecked dereference (kernel test bot)
CC: Alex Hung <alex.hung@amd.com>
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Roman Li <Roman.Li@amd.com>
CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The nbif_v6_3_1_sriov_funcs instance of amdgpu_nbio_funcs was added in
commit 894c6d3522d1 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
but has remained unused.
Alex has confirmed it wasn't needed.
Remove it, together with the four unused stub functions:
nbif_v6_3_1_sriov_ih_doorbell_range
nbif_v6_3_1_sriov_gc_doorbell_init
nbif_v6_3_1_sriov_vcn_doorbell_range
nbif_v6_3_1_sriov_sdma_doorbell_range
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset function callback for JPEG5_0_1 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When a ring reset happens, the kernel log shows only "amdgpu: Starting
<ring name> ring reset", but when it finishes nothing appears in the
log. Explicitly write in the log that the reset has finished correctly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After a GPU reset happens, the driver creates a coredump file. However,
the user might not be aware of it. Log the file creation the user can
find more information about the device and add the file to bug reports.
This is similar to what the xe driver does.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-send the mes message on resume to make sure the
mes state is up to date.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Melissa Wen
Alex Deucher
David Yat Sin
chr[]
Tao Zhou
Srinivasan Shanmugam
Pierre-Eric Pelloux-Prayer
ganglxie
Asad Kamal
Jesse.zhang@amd.com
Xiang Liu
Mangesh Gadre
Jonathan Kim
Taimur Hassan
Roman Li
Mike Katsnelson
Nicholas Kazlauskas
Krunoslav Kovac
Yihan Zhu
Michael Strauss
Charlene Liu
Aurabindo Pillai
Rafal Ostrowski
Patel, Swapnil
Yilin Chen
Peichen Huang
Navid Assadian
Samson Tam
Alex Hung
Tom Chung
Colin Ian King
Dr. David Alan Gilbert
Sathishkumar S
André Almeida