aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/input/joystick/xpad.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2023-05-01Merge branch 'next' into for-linusDmitry Torokhov1-2/+21
Prepare input updates for 6.4 merge window.
2023-05-01Revert "Input: xpad - fix support for some third-party controllers"Dmitry Torokhov1-23/+0
This reverts commit db7220c48d8d71476f881a7ae1285e1df4105409 because it causes crashes when trying to dereference xpad->dev->dev in xpad_probe() which has not been set up yet. Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com Reported-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbM Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-14Input: xpad - fix PowerA EnWired Controller guide buttonVicki Pfau1-0/+15
This commit explicitly disables the audio interface the same way the official driver does. This is needed for some controllers, such as the PowerA Enhanced Wired Controller for Series X|S (0x20d6:0x200e) to report the guide button. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-14Input: xpad - add constants for GIP interface numbersVicki Pfau1-1/+4
Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: xpad - fix support for some third-party controllersVicki Pfau1-0/+23
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers. Co-authored-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: xpad - treat Qanba controllers as Xbox360 controllersPierre-Loup A. Griffais1-0/+1
They act that way in PC mode. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Input: xpad - add VID for Turtle Beach controllersVicki Pfau1-0/+1
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Input: xpad - remove unused field in VID/PID tableVicki Pfau1-1/+0
The list of specific VID/PID combinations for various controllers recently added a new field "xtype". However, this field isn't used, nor filled in the table itself, and was likely added by mistake and overlooked during review. Since this field isn't used, it's safe to remove. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-19Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTONMatthias Benkmann1-3/+4
When commit commit fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile button") was applied, one hunk ended up in the wrong function; move it to where it belongs. Fixes: fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile button") Signed-off-by: Matthias Benkmann <matthias.benkmann@gmail.com> Link: https://lore.kernel.org/r/20230318162106.0aef4ba5@ninja Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-01-27Input: xpad - add 8BitDo Pro 2 Wired Controller supportJohn Butler1-0/+2
Add VID and PID to the xpad_device table to allow driver to use the 8BitDo Pro 2 Wired Controller, which is XTYPE_XBOX360 compatible by default. Signed-off-by: John Butler <radon86dev@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20230124005206.80706-1-radon86dev@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-28Input: xpad - add X-Box Adaptive Profile buttonNate Yocom1-2/+15
Adds a new quirk for controllers that have a Profile button which has 4 states, reflected as an ABS_PROFILE axis with 4 values. Signed-off-by: Nate Yocom <nate@yocom.org> Tested-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20220908173930.28940-6-nate@yocom.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-28Input: xpad - add X-Box Adaptive XBox buttonNate Yocom1-1/+2
Adaptive controller sets 0x02 bit for this button, all others set 0x01 so presence of either is used for BTN_MODE. Signed-off-by: Nate Yocom <nate@yocom.org> Tested-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com Link: https://lore.kernel.org/r/20220908173930.28940-3-nate@yocom.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-28Input: xpad - add X-Box Adaptive supportNate Yocom1-0/+1
Adds correct VID/PID for this XTYPE_XBOXONE compatible controller to xpad_device[] table. Signed-off-by: Nate Yocom <nate@yocom.org> Tested-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220908173930.28940-2-nate@yocom.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-27Input: xpad - decipher xpadone packages with GIP definesPavel Rojtberg1-30/+69
only renames, no functional changes. Some of the packets we send seem superfluous now. Unfortunately I dont have the hardware to verify whether they are. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220913213133.584979-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-27Input: xpad - refactor using BIT() macroPavel Rojtberg1-56/+57
reduces the amount of magic numbers and makes the code more readable Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220913213133.584979-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-06Input: xpad - add support for XBOX One Elite paddlesChristopher Crockett1-61/+193
An effort has been made to support every official model and firmware version I could track down info on. The following controllers _should_ have working paddles with this PR: - Xbox Elite (**untested**) - Xbox Elite Series 2 on early firmwares (**untested**) - Xbox Elite Series 2 on v4 firmwares (Tested v4.8.1908.0) - Xbox Elite Series 2 on v5 pre-BLE firmwares (**untested**) - Xbox Elite Series 2 on v5 post-BLE firmwares (Tested v5.13.3143.0) This patch also introduces correct handling for the Elite 1 controller and properly suppresses paddle inputs when using a custom profile slot. Starting with firmware v5.11, certain inputs for the Elite 2 were moved to an extra packet that is not enabled by default. We must first manually enable this extra packet in order to correctly process paddle input data with these later firmwares. Signed-off-by: Christopher Crockett <chaorace@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Tested-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20220818154411.510308-5-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-06Input: xpad - Poweroff XBOX360W on mode button long pressSantosh De Massari1-0/+24
Newer gamepads turn themselves off when the mode button is held down. For XBOX360W gamepads we must do this in the driver. Do not use BIT() macro for consistency within the file. Signed-off-by: Santosh De Massari <s.demassari@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-4-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-06Input: xpad - fix wireless 360 controller breaking after suspendCameron Gutman1-1/+0
Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-06Input: xpad - add supported devices as contributed on githubPavel Rojtberg1-0/+19
This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15Input: xbox - correct the name for Xbox Series S|X controllerMarcos Alano1-1/+1
Change the name of controller to a more meaningful one. Signed-off-by: Marcos Alano <marcoshalano@gmail.com> Link: https://lore.kernel.org/r/20220212191014.1754721-1-marcoshalano@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen1-0/+2
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-24Input: xpad - map "Select" button on Microsoft Xbox One controllerChris Ye1-0/+6
Add "Select" button input capability and input event mapping for Microsoft Xbox One controller. From product site this is also referred as "Share" button. Signed-off-by: Chris Ye <lzye@google.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20210414021201.2462114-1-lzye@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-06Input: xpad - add support for Amazon Game ControllerMatt Reynolds1-0/+2
The Amazon Luna controller (product name "Amazon Game Controller") behaves like an Xbox 360 controller when connected over USB. Signed-off-by: Matt Reynolds <mattreynolds@chromium.org> Reviewed-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20210429103548.1.If5f9a44cb81e25b9350f7c6c0b3c88b4ecd81166@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-16Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|SOlivier Crête1-0/+1
Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca> Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin1-1/+16
There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14Merge branch 'next' into for-linusDmitry Torokhov1-3/+3
Prepare input updates for 5.11 merge window.
2020-12-02Input: use input_device_enabled()Andrzej Pietrasiewicz1-2/+2
Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind1-0/+2
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: xpad - demote non-conformant kernel-doc headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/input/joystick/xpad.c:1361: warning: Function parameter or member 'xpad' not described in 'xpad_send_led_command' drivers/input/joystick/xpad.c:1361: warning: Function parameter or member 'command' not described in 'xpad_send_led_command' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-2-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: xpad - add custom init packet for Xbox One S controllersŁukasz Patron1-0/+12
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13Input: xpad - add support for SteelSeries Stratus DuoTom Panfil1-0/+3
Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman1-10/+6
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: xpad - add support for Xbox1 PDP Camo series gamepadRamses Ramírez1-0/+3
The "Xbox One PDP Wired Controller - Camo series" has a different product-id than the regular PDP controller and the PDP stealth series, but it uses the same initialization sequence. This patch adds the product-id of the camo series to the structures that handle the other PDP Xbox One controllers. Signed-off-by: Ramses Ramírez <ramzeto@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: xpad - fix GPD Win 2 controller nameEnno Boland1-1/+1
This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by: Enno Boland <gottox@voidlinux.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04Input: xpad - add GPD Win 2 Controller USB IDsEthan Lee1-0/+2
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by: Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Merge tag 'v4.17-rc6' into nextDmitry Torokhov1-2/+7
Sync up with mainline to bring in Atmel controller changes for Caroline.
2018-05-08Input: xpad - avoid using __set_bit() for capabilitiesMarcus Folkesson1-10/+10
input_set_capability() and input_set_abs_param() will do it for you. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08Input: xpad - fix some coding style issuesLeo Sperling1-6/+9
Fix some coding style issues reported by checkpatch.pl. Mostly brackets in macros, spacing and comment style. Signed-off-by: Leo Sperling <leosperling97@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26Input: xpad - add PDP device id 0x02a4Francis Therien1-2/+7
Adds support for a PDP Xbox One controller with device ID (0x06ef:0x02a4). The Product string for this device is "PDP Wired Controller for Xbox One - Stealth Series | Phantom Black". Signed-off-by: Francis Therien <frtherien@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-01Merge tag 'v4.15' into nextDmitry Torokhov1-0/+19
Sync with mainline to get in trackpoint updates and other changes.
2018-02-01Merge branch 'next' into for-linusDmitry Torokhov1-5/+2
Prepare input updates for 4.16 merge window.
2018-01-22Input: xpad - add support for PDP Xbox One controllersMark Furneaux1-0/+19
Adds support for the current lineup of Xbox One controllers from PDP (Performance Designed Products). These controllers are very picky with their initialization sequence and require an additional 2 packets before they send any input reports. Signed-off-by: Mark Furneaux <mark@furneaux.ca> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-17Input: inline macros for MODULE_LICENSE, etcJulia Lawall1-5/+2
Inline macro for MODULE_LICENSE to make the license information easy to find, eg with grep. Inline the other module-related macros at the same time. A simplified version of the semantic patch for the MODULE_LICENSE case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s@ identifier i; expression e; @@ @@ declarer name MODULE_LICENSE; identifier s.i; expression s.e; @@ MODULE_LICENSE( - i + e ); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [dtor: added a couple of drivers missed by the script, removed a few unused DRIVER_VERSION macros] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21Merge tag 'ib-mfd-many-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into nextDmitry Torokhov1-5/+19
Merge "Immutable branch between MFD and many other subsystems due for the v4.14 merge window" to get the TWL headers moved to the right place.
2017-09-15Merge branch 'next' into for-linusDmitry Torokhov1-4/+6
Prepare second round of input updates for 4.14 merge window.
2017-09-12Input: xpad - validate USB endpoint type during probeCameron Gutman1-4/+6
We should only see devices with interrupt endpoints. Ignore any other endpoints that we find, so we don't send try to send them interrupt URBs and trigger a WARN down in the USB stack. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> # c01b5e7464f0 Input: xpad - don't depend on endpoint order Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-04Merge branch 'next' into for-linusDmitry Torokhov1-1/+1
Prepare input updates for 4.14 merge window.
2017-08-31Input: xpad - fix PowerA init quirk for some gamepad modelsCameron Gutman1-5/+19
The PowerA gamepad initialization quirk worked with the PowerA wired gamepad I had around (0x24c6:0x543a), but a user reported [0] that it didn't work for him, even though our gamepads shared the same vendor and product IDs. When I initially implemented the PowerA quirk, I wanted to avoid actually triggering the rumble action during init. My tests showed that my gamepad would work correctly even if it received a rumble of 0 intensity, so that's what I went with. Unfortunately, this apparently isn't true for all models (perhaps a firmware difference?). This non-working gamepad seems to require the real magic rumble packet that the Microsoft driver sends, which actually vibrates the gamepad. To counteract this effect, I still send the old zero-rumble PowerA quirk packet which cancels the rumble effect before the motors can spin up enough to vibrate. [0]: https://github.com/paroj/xpad/issues/48#issuecomment-313904867 Reported-by: Kyle Beauchamp <kyleabeauchamp@gmail.com> Tested-by: Kyle Beauchamp <kyleabeauchamp@gmail.com> Fixes: 81093c9848a7 ("Input: xpad - support some quirky Xbox One pads") Cc: stable@vger.kernel.org # v4.12 Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-07Input: xpad - constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.