aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-12-05ixgbe: Add X550 support function pointersDon Skidmore1-14/+12
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: cleanup checksum to allow error resultsDon Skidmore1-19/+40
Currently the shared code checksum calculation function only returns a u16 and cannot return an error code. Unfortunately a variety of errors can happen that completely prevent the calculation of a checksum. So, change the function return value from a u16 to an s32 and return a negative value on error, or the positive checksum value when there is no error. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add x550 SW/FW semaphore supportDon Skidmore1-4/+4
The X550 hardware will use more bits in the mask, so change the prototypes to match. This larger mask will require changes in callers which use the higher bits. Likewise since X550 will use different semaphore mask values and will use the lan_id value. So save these values in the ixgbe_phy_info struct. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Make return values more directMark Rustad1-18/+12
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Delete a bunch of dead codeMark Rustad1-27/+0
All of the code involved with returning the supported physical layer is actually unused, so delete it. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Correct X540 semaphore errorMark Rustad1-18/+16
In the function ixgbe_get_swfw_sync_semaphore, an incorrect check was treating success as failure and vice-versa. This led to manipulating the IXGBE_SWFW_SYNC register without holding the software semaphore first, which is an error. In addition, if getting the REGSMP bit in the IXGBE_SW_FW_SYNC register timed out, no error code would be returned, making the caller think that it had successfully acquired the lock. Fix both of those issues and clean up the function a bit, such as make the name in the comment match the function. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Fix spurious release of semaphore in EEPROM accessMark Rustad1-70/+53
Failure to acquire the semaphore would lead to a spurious release of the semaphore in several functions. Do not release a semaphore that you did not get. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Convert some udelays to usleep_rangeMark Rustad1-2/+2
Convert some udelay calls to the preferred usleep_range. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix several concatenated strings to single lineJacob Keller1-2/+1
This patch fixes various log strings that are split over multiple lines in the ixgbe driver. This cleans up checkpatch.pl warnings, and makes it easier to search the code for warning strings displayed to the kernel log. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-7/+7
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: Stop cacheing if the MNG FW enabledDon Skidmore1-1/+0
We use to cache whether the MNG FW was enabled, how since this isn't static we really need to verify with each check. This patch makes that change. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller1-0/+1
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: move setting rx_pb_size into get_invariantsJacob Keller1-1/+1
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore1-0/+2
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbe: Cleanup the use of tabs and spacesJeff Kirsher1-6/+6
Cleans up the whitespace issues noticed during code review where a mix of tabs and spaces were used for indentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17ixgbe: fix MNG FW support when adapter not upDon Skidmore1-0/+1
We were only turning the laser on when the adapter was up. This causes issues for those who wanted to access the MNG FW while the port was in a down state. This patch makes sure the laser is turned on in probe and remain up even after the port is brought down. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: allow reading of SFF-8472 data over i2cEmil Tantilov1-0/+1
This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume <footplus@gmail.com> CC: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-31ixgbe: autoneg variable refactoringJosh Hay1-3/+2
Removes the autoneg parameter from the setup_link functions. Adds local variable autoneg to setup_link functions to be passed to get_link_capabilities functions if needed. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2013-01-31ixgbe: removed unused variable from setup_link_speedJosh Hay1-1/+1
Removes the autoneg parameter from the setup_link_speed functions. These functions do nothing with this parameter. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06ixgbe: Use is_valid_ether_addrJoe Perches1-1/+1
Use the normal kernel test instead of a module specific one. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-19ixgbe: Correctly set SAN MAC RAR pool to default pool of PFAlexander Duyck1-0/+4
This change corrects an issue in which an FCoE enabled adapter was always setting the FCoE SAN MAC MPSAR register to 0x1. This results in the first VF being assigned the SAN MAC address in the case of SR-IOV and as such is incorrect. To resolve this I am adding a new function that will update the SAN MAC pool address after reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-02ixgbe: add hwmon interface to export thermal dataDon Skidmore1-0/+2
Some of our adapters have thermal data available, this patch exports this data via hwmon sysfs interface. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-14ixgbe: Fix race condition where RX buffer could become corrupted.Atita Shirwaikar1-0/+2
There was a race condition in the reset path where the RX buffer could become corrupted during Fdir configuration.This is due to a HW bug.The fix right now is to lock the buffer while we do the fdir configuration.Since we were using similar workaround for another bug, I moved the existing code to a function and reused it.HW team also recommended that IXGBE_MAX_SECRX_POLL value be changed from 30 to 40.The erratum for this bug will be published in the next release 82599 Spec Update Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13drivers/net: Remove boolean comparisons to true/falseJoe Perches1-1/+1
Booleans should not be compared to true or false but be directly tested or tested with !. Done via cocci script: @@ bool t; @@ - t == true + t @@ bool t; @@ - t != true + !t @@ bool t; @@ - t == false + !t @@ bool t; @@ - t != false + t Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-03ixgbe: update copyright to 2012Don Skidmore1-1/+1
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16ixgbe: fix LED blink logic to check for linkEmil Tantilov1-7/+11
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-05ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599Emil Tantilov1-0/+1
82598 and 82599 do not ship with this type of PHY Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-23ixgbe: remove global reset to the MACEmil Tantilov1-17/+2
Reloading FW during resets can cause issues. Remove the full reset as it is not needed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-23ixgbe: avoid HW lockup when adapter is reset with Tx work pendingEmil Tantilov1-6/+6
This change is meant to avoid a hardware lockup when Tx work is still pending and we request a reset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-15ixgbe: cleanup reset pathsAlexander Duyck1-58/+14
The reset paths are overly complicated and are either missing steps or contain extra unnecessary steps such as reading MAC address twice. This change is meant to help clean up the reset paths an get things functioning correctly. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-10intel: Move the Intel wired LAN driversJeff Kirsher1-0/+941
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.