aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/net/phy/mscc/mscc_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: phy: mscc: Add MODULE_FIRMWARE macrosJuerg Haefliger1-0/+3
The driver requires firmware so define MODULE_FIRMWARE so that modinfo provides the details. Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files") Signed-off-by: Juerg Haefliger <juergh@canonical.com> Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski1-1/+1
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-19net: phy: mscc: coma mode disabled for VSC8584Bjarni Jonasson1-0/+1
This patch releases coma mode for VSC8584 as done for VSC8514 in commit ca0d7fd0a58d ("net: phy: mscc: coma mode disabled for VSC8514") Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19net: phy: mscc: improved serdes calibration applied to VSC8584Bjarni Jonasson1-56/+154
Introduced 'FOJI' serdes calibration in commit 85e97f0b984e ("net: phy: mscc: improved serdes calibration applied to VSC8514") Now including the VSC8584 family. Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19net: phy: mscc: Applying LCPLL reset to VSC8584Bjarni Jonasson1-0/+6
Introduced LCPLL reset in commit d15e08d9fb82 ("net: phy: mscc: adding LCPLL reset to VSC8514"). Now applying this reset to the VSC8584 phy familiy. Fixes: a5afc1678044a ("net: phy: mscc: add support for VSC8584 PHY.") Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: coma mode disabled for VSC8514Bjarni Jonasson1-0/+16
The 'coma mode' (configurable through sw or hw) provides an optional feature that may be used to control when the PHYs become active. The typical usage is to synchronize the link-up time across all PHY instances. This patch releases coma mode if not done by hardware, otherwise the phys will not link-up. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: improved serdes calibration applied to VSC8514Bjarni Jonasson1-166/+142
The current IB serdes calibration algorithm (performed by the onboard 8051) has proven to be unstable for the VSC8514 QSGMII phy. A new algorithm has been developed based on 'Frequency-offset Jittered-Injection' or 'FoJi' method which solves all known issues. This patch disables the 8051 algorithm and replaces it with the new FoJi algorithm. The calibration is now performed in a new file (mscc_serdes.c), which can act as an placeholder for future serdes configurations. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: adding LCPLL reset to VSC8514Bjarni Jonasson1-122/+228
At Power-On Reset, transients may cause the LCPLL to lock onto a clock that is momentarily unstable. This is normally seen in QSGMII setups where the higher speed 6G SerDes is being used. This patch adds an initial LCPLL Reset to the PHY (first instance) to avoid this issue. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-05net: phy: mscc: remove the use of .ack_interrupt()Ioana Ciornei1-4/+8
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Antoine Tenart <atenart@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> # VSC8514 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05net: phy: mscc: implement generic .handle_interrupt() callbackIoana Ciornei1-28/+28
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Also, remove the .did_interrupt() callback since it's not anymore used. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> # VSC8514 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05net: phy: mscc: use phy_trigger_machine() to notify link changeIoana Ciornei1-1/+1
According to the comment describing the phy_mac_interrupt() function, it it intended to be used by MAC drivers which have noticed a link change thus its use in the mscc PHY driver is improper and, most probably, was added just because phy_trigger_machine() was not exported. Now that we have acces to trigger the link state machine, use directly the phy_trigger_machine() function to notify a link change detected by the PHY driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-20net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"Kaige Li1-2/+2
There are a couple of spelling mistakes in comment text. Fix these. Signed-off-by: Kaige Li <likaige@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: mscc: improve vsc8514/8584_config_init consistencyAntoine Tenart1-4/+8
All PHY read and write return values are checked for errors in vsc8514_config_init and vsc8584_config_init, except for one. Fix this. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: mscc: remove useless page configuration in the config initAntoine Tenart1-7/+0
In the middle of vsc8584_config_init and vsc8514_config_init, the page is set to 'standard'. This is the default value, and the page isn't set to another value before. Those pages configuration can be safely removed. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: mscc: restore the base page in vsc8514/8584_config_initAntoine Tenart1-0/+9
In the vsc8584_config_init and vsc8514_config_init, the base page is set to 'GPIO', configuration is done, and the page is never explicitly restored to the standard page. No bug was triggered as it turns out helpers called in those config_init functions do modify the base page, and set it back to standard. But that is dangerous and any modification to those functions would introduce bugs. This patch fixes this, to improve maintenance, by restoring the base page to 'standard' once 'GPIO' accesses are completed. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: mscc: do not access the MDIO bus lock directlyAntoine Tenart1-12/+12
This patch improves the MSCC driver by using the provided phy_lock_mdio_bus and phy_unlock_mdio_bus helpers instead of locking and unlocking the MDIO bus lock directly. The patch is only cosmetic but should improve maintenance and consistency. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: mscc: fix a possible double unlockAntoine Tenart1-1/+1
On vsc8584_ptp_init failure we jump to the 'err' label, which unlocks the MDIO bus lock. But vsc8584_ptp_init isn't called with the MDIO bus lock taken, which could result in a double unlock. Fix this. Fixes: ab2bf9339357 ("net: phy: mscc: 1588 block initialization") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: phy: mscc: timestamping and PHC supportAntoine Tenart1-3/+18
This patch adds support for PHC and timestamping operations for the MSCC PHY. PTP 1-step and 2-step modes are supported, over Ethernet and UDP. To get and set the PHC time, a GPIO has to be used and changes are only retrieved or committed when on a rising edge. The same GPIO is shared by all PHYs, so the granularity of the lock protecting it has to be different from the ones protecting the 1588 registers (the VSC8584 PHY has 2 1588 blocks, and a single load/save pin). Co-developed-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: phy: mscc: 1588 block initializationQuentin Schulz1-2/+28
This patch adds the first parts of the 1588 support in the MSCC PHY, with registers definition and the 1588 block initialization. Those PHYs are distributed in hardware packages containing multiple times the PHY. The VSC8584 for example is composed of 4 PHYs. With hardware packages, parts of the logic is usually common and one of the PHY has to be used for some parts of the initialization. Following this logic, the 1588 blocks of those PHYs are shared between two PHYs and accessing the registers has to be done using the "base" PHY of the group. This is handled thanks to helpers in the PTP code (and locks). We also need the MDIO bus lock while performing a single read or write to the 1588 registers as the read/write are composed of multiple MDIO transactions (and we don't want other threads updating the page). Co-developed-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: phy: mscc: remove the TR CLK disable magic valueQuentin Schulz1-5/+5
This patch adds a define for the 0x8000 magic value used to perform enable/disable actions on the "token ring clock". The patch is only cosmetic. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-05net: phy: mscc: fix Serdes configuration in vsc8584_config_initAntoine Tenart1-2/+2
When converting the MSCC PHY driver to shared PHY packages, the Serdes configuration in vsc8584_config_init was modified to use 'base_addr' instead of 'base' as the port number. But 'base_addr' isn't equal to 'addr' for all PHYs inside the package, which leads to the Serdes still being enabled on those ports. This patch fixes it. Fixes: deb04e9c0ff2 ("net: phy: mscc: use phy_package_shared") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-05net: mscc: Fix OF_MDIO config checkDan Murphy1-2/+2
When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module. Fixes: 4f58e6dceb0e4 ("net: phy: Cleanup the Edge-Rate feature in Microsemi PHYs.") Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: phy: mscc: fix PHYs using the vsc8574_probeAntoine Tenart1-0/+4
PHYs using the vsc8574_probe fail to be initialized and their config_init return -EIO leading to errors like: "could not attach PHY: -5". This is because when the conversion of the MSCC PHY driver to use the shared PHY package helpers was done, the base address retrieval and the base PHY read and write helpers in the driver were modified. In particular, the base address retrieval logic was moved from the config_init to the probe. But the vsc8574_probe was forgotten. This patch fixes it. Fixes: deb04e9c0ff2 ("net: phy: mscc: use phy_package_shared") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+2
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: phy: mscc: fix initialization of the MACsec protocol modeAntoine Tenart1-0/+4
At the very end of the MACsec block initialization in the MSCC PHY driver, the MACsec "protocol mode" is set. This setting should be set based on the PHY id within the package, as the bank used to access the register used depends on this. This was not done correctly, and only the first bank was used leading to the two upper PHYs being unstable when using the VSC8584. This patch fixes it. Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: phy: mscc: use phy_package_sharedMichael Walle1-69/+32
Use the new phy_package_shared common storage to ease the package initialization and to access the global registers. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: phy: mscc: use mdiobus_get_phy()Michael Walle1-4/+3
Don't use internal knowledge of the mdio bus core, instead use mdiobus_get_phy() which does the same thing. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24net: phy: mscc: consolidate a common RGMII delay implementationVladimir Oltean1-38/+40
It looks like the VSC8584 PHY driver is rolling its own RGMII delay configuration code, despite the fact that the logic is mostly the same. In fact only the register layout and position for the RGMII controls has changed. So we need to adapt and parameterize the PHY-dependent bit fields when calling the new generic function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: phy: mscc: add support for VSC8502Vladimir Oltean1-0/+24
This is a dual copper PHY with support for MII/GMII/RGMII on MAC side, as well as a bunch of other features such as SyncE and Ring Resiliency. I haven't tested interrupts and WoL, but I am confident that they work since support is already present in the driver and the register map is no different for this PHY. PHY statistics work, PHY tunables appear to work, suspend/resume works. Signed-off-by: Wes Li <wes.li@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: phy: mscc: configure both RX and TX internal delays for RGMIIVladimir Oltean1-3/+13
The driver appears to be secretly enabling the RX clock skew irrespective of PHY interface type, which is generally considered a big no-no. Make them configurable instead, and add TX internal delays when necessary too. While at it, configure a more canonical clock skew of 2.0 nanoseconds than the current default of 1.1 ns. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: phy: mscc: accept all RGMII species in vsc85xx_mac_if_setVladimir Oltean1-0/+3
The helper for configuring the pinout of the MII side of the PHY should do so irrespective of whether RGMII delays are used or not. So accept the ID, TXID and RXID variants as well, not just the no-delay RGMII variant. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: phy: mscc: rename enum rgmii_rx_clock_delay to rgmii_clock_delayVladimir Oltean1-1/+1
There is nothing RX-specific about these clock skew values. So remove "RX" from the name in preparation for the next patch where TX delays are also going to be configured. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: RGMII skew delay configurationAntoine Tenart1-0/+29
This patch adds support for configuring the RGMII skew delays in Rx and Tx. The Rx and Tx skews are set based on the interface mode. By default their configuration is set to the default value in hardware (0.2ns); this means the driver do not rely anymore on the bootloader configuration. Then based on the interface mode being used, a 2ns delay is added: - RGMII_ID adds it for both Rx and Tx. - RGMII_RXID adds it for Rx. - RGMII_TXID adds it for Tx. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add support for RGMII MAC modeAntoine Tenart1-12/+20
This patch adds support for connecting VSC8584 PHYs to the MAC using RGMII. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add missing check on a phy_write return valueAntoine Tenart1-0/+2
Commit a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") introduced a call to 'phy_write' storing its return value to a variable called 'ret'. But 'ret' never was checked for a possible error being returned, and hence was not used at all. Fix this by checking the return value and exiting the function if an error was returned. As this does not fix a known bug, this commit is mostly cosmetic and not sent as a fix. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phy: mscc: consider interrupt source in interrupt handlerHeiner Kallweit1-2/+5
Trigger the respective interrupt handler functionality only if the related interrupt source bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phy: improve phy_driver callback handle_interruptHeiner Kallweit1-2/+9
did_interrupt() clears the interrupt, therefore handle_interrupt() can not check which event triggered the interrupt. To overcome this constraint and allow more flexibility for customer interrupt handlers, let's decouple handle_interrupt() from parts of the phylib interrupt handling. Custom interrupt handlers now have to implement the did_interrupt() functionality in handle_interrupt() if needed. Fortunately we have just one custom interrupt handler so far (in the mscc PHY driver), convert it to the changed API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net: phy: mscc: split the driver into separate filesAntoine Tenart1-0/+2377
This patch splits the MSCC driver into separate files, per functionality, to improve readability and maintenance as the codebase grew a lot. The MACsec code is moved to a dedicated mscc_macsec.c file, the mscc.c file is renamed to mscc_main.c to keep the driver binary to be named mscc and common definition are put into a new mscc.h header. Most of the code was just moved around, except for a few exceptions: - Header inclusions were reworked to only keep what's needed. - Three helpers were created in the MACsec code, to avoid #ifdef's in the main C file: vsc8584_macsec_init, vsc8584_handle_macsec_interrupt and vsc8584_config_macsec_intr. The patch should not introduce any functional modification. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.