| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.
And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].
Fixes: 30c3c4a4497c ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.
Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.
Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.
Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.
Fixes: 1a4fec49efe5 ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This reverts commit 968595a93669b6b4f6d1fcf80cf2d97956b6868f.
Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-3-magnus.karlsson@gmail.com
|
|
This reverts commit 2863d665ea41282379f108e4da6c8a2366ba66db.
This patch introduced a potential kernel crash when multiple napi instances
redirect to the same AF_XDP socket. By removing the queue_index check, it is
possible for multiple napi instances to access the Rx ring at the same time,
which will result in a corrupted ring state which can lead to a crash when
flushing the rings in __xsk_flush(). This can happen when the linked list of
sockets to flush gets corrupted by concurrent accesses. A quick and small fix
is not possible, so let us revert this for now.
Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
|
|
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.
Setting the run context (task->bpf_ctx pointer) for test_run
callback.
Fixes: 7adfc6c9b315 ("bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value")
Reported-by: syzbot+3ab78ff125b7979e45f9@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=3ab78ff125b7979e45f9
Link: https://lore.kernel.org/bpf/20240604150024.359247-1-jolsa@kernel.org
|
|
New CPU #defines encode vendor and family as well as model.
Link: https://lore.kernel.org/all/20240520224620.9480-4-tony.luck@intel.com/
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is
called, in which case tpm_tis_remove() unconditionally calling
flush_work() is triggering a warning for .func still being NULL.
Cc: stable@vger.kernel.org # v6.5+
Fixes: 481c2d14627d ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
KVM (and pKVM) do not support SME guests. Therefore KVM ensures
that the host's SME state is flushed and that SME controls for
enabling access to ZA storage and for streaming are disabled.
pKVM needs to protect against a buggy/malicious host. Ensure that
it wouldn't run a guest when protected mode is enabled should any
of the SME controls be enabled.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When setting/clearing CPACR bits for EL0 and EL1, use the ELx
format of the bits, which covers both. This makes the code
clearer, and reduces the chances of accidentally missing a bit.
No functional change intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have introduced finalize_init_hyp_mode(), lets
consolidate the initializing of the host_data fpsimd_state and
sve state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When running in protected mode we don't want to leak protected
guest state to the host, including whether a guest has used
fpsimd/sve. Therefore, eagerly restore the host state on guest
exit when running in protected mode, which happens only if the
guest has used fpsimd/sve.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Protected mode needs to maintain (save/restore) the host's sve
state, rather than relying on the host kernel to do that. This is
to avoid leaking information to the host about guests and the
type of operations they are performing.
As a first step towards that, allocate memory mapped at hyp, per
cpu, for the host sve state. The following patch will use this
memory to save/restore the host state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In subsequent patches, n/vhe will diverge on saving the host
fpsimd/sve state when taking a guest fpsimd/sve trap. Add a
specialized helper to handle it.
No functional change intended.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The same traps controlled by CPTR_EL2 or CPACR_EL1 need to be
toggled in different parts of the code, but the exact bits and
their polarity differ between these two formats and the mode
(vhe/nvhe/hvhe).
To reduce the amount of duplicated code and the chance of getting
the wrong bit/polarity or missing a field, abstract the set/clear
of CPTR_EL2 bits behind a helper.
Since (h)VHE is the way of the future, use the CPACR_EL1 format,
which is a subset of the VHE CPTR_EL2, as a reference.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since the prototypes for __sve_save_state/__sve_restore_state at
hyp were added, the underlying macro has acquired a third
parameter for saving/restoring ffr.
Fix the prototypes to account for the third parameter, and
restore the ffr for the guest since it is saved.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the hypervisor is handling the host sve state in
protected mode, it needs to be able to save it.
This reverts commit e66425fc9ba3 ("KVM: arm64: Remove unused
__sve_save_state").
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.
The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.
Fixes: c5c37af6ecad ("tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530232607.82686-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/test_rhashtable.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240531-md-lib-test_rhashtable-v1-1-cd6d4138f1b6@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After fixing four different bugs involving dst_cache
users, it might be worth adding a check about BH being
blocked by dst_cache callers.
DEBUG_NET_WARN_ON_ONCE(!in_softirq());
It is not fatal, if we missed valid case where no
BH deadlock is to be feared, we might change this.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in seg6_output_core() is not good enough,
because seg6_output_core() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter seg6_output_core()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in seg6_input_core().
Fixes: fa79581ea66c ("ipv6: sr: fix several BUGs when preemption is enabled")
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <dlebrun@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in rpl_input().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in ioam6_output() is not good enough,
because ioam6_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter ioam6_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base,
the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset
rq->data_ring.desc_size for the data ring that failed, which presumably
causes the hypervisor to reference it on packet reception.
To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell
the hypervisor to disable this feature.
[ 95.436876] kernel BUG at net/core/skbuff.c:207!
[ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1
[ 95.441558] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018
[ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f
[ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50
ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9
ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24
[ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246
[ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f
[ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
[ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60
[ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000
[ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0
[ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000
[ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0
[ 95.459791] Call Trace:
[ 95.460515] <IRQ>
[ 95.461180] ? __die_body.cold+0x19/0x27
[ 95.462150] ? die+0x2e/0x50
[ 95.462976] ? do_trap+0xca/0x110
[ 95.463973] ? do_error_trap+0x6a/0x90
[ 95.464966] ? skb_panic+0x4d/0x4f
[ 95.465901] ? exc_invalid_op+0x50/0x70
[ 95.466849] ? skb_panic+0x4d/0x4f
[ 95.467718] ? asm_exc_invalid_op+0x1a/0x20
[ 95.468758] ? skb_panic+0x4d/0x4f
[ 95.469655] skb_put.cold+0x10/0x10
[ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3]
[ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3]
[ 95.473185] __napi_poll+0x2b/0x160
[ 95.474145] net_rx_action+0x2c6/0x3b0
[ 95.475115] handle_softirqs+0xe7/0x2a0
[ 95.476122] __irq_exit_rcu+0x97/0xb0
[ 95.477109] common_interrupt+0x85/0xa0
[ 95.478102] </IRQ>
[ 95.478846] <TASK>
[ 95.479603] asm_common_interrupt+0x26/0x40
[ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20
[ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90
[ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246
[ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000
[ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001
[ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3
[ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260
[ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000
[ 95.495035] acpi_safe_halt+0x14/0x20
[ 95.496127] acpi_idle_do_entry+0x2f/0x50
[ 95.497221] acpi_idle_enter+0x7f/0xd0
[ 95.498272] cpuidle_enter_state+0x81/0x420
[ 95.499375] cpuidle_enter+0x2d/0x40
[ 95.500400] do_idle+0x1e5/0x240
[ 95.501385] cpu_startup_entry+0x29/0x30
[ 95.502422] start_secondary+0x11c/0x140
[ 95.503454] common_startup_64+0x13e/0x141
[ 95.504466] </TASK>
[ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback
vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock
sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev
loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx
crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel
sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi
ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc
scsi_dh_alua ip6_tables ip_tables fuse
[ 95.516536] ---[ end trace 0000000000000000 ]---
Fixes: 6f4833383e85 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()")
Signed-off-by: Matthias Stocker <mstocker@barracuda.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove support for specifying a static local APIC timer advancement value,
and instead present a read-only boolean parameter to let userspace enable
or disable KVM's dynamic APIC timer advancement. Realistically, it's all
but impossible for userspace to specify an advancement that is more
precise than what KVM's adaptive tuning can provide. E.g. a static value
needs to be tuned for the exact hardware and kernel, and if KVM is using
hrtimers, likely requires additional tuning for the exact configuration of
the entire system.
Dropping support for a userspace provided value also fixes several flaws
in the interface. E.g. KVM interprets a negative value other than -1 as a
large advancement, toggling between a negative and positive value yields
unpredictable behavior as vCPUs will switch from dynamic to static
advancement, changing the advancement in the middle of VM creation can
result in different values for vCPUs within a VM, etc. Those flaws are
mostly fixable, but there's almost no justification for taking on yet more
complexity (it's minimal complexity, but still non-zero).
The only arguments against using KVM's adaptive tuning is if a setup needs
a higher maximum, or if the adjustments are too reactive, but those are
arguments for letting userspace control the absolute max advancement and
the granularity of each adjustment, e.g. similar to how KVM provides knobs
for halt polling.
Link: https://lore.kernel.org/all/20240520115334.852510-1-zhoushuling@huawei.com
Cc: Shuling Zhou <zhoushuling@huawei.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522010304.1650603-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. Although KVM currently enforces LBRV for SEV-ES guests, there
are multiple issues with it:
o MSR_IA32_DEBUGCTLMSR is still intercepted. Since MSR_IA32_DEBUGCTLMSR
interception is used to dynamically toggle LBRV for performance reasons,
this can be fatal for SEV-ES guests. For ex SEV-ES guest on Zen3:
[guest ~]# wrmsr 0x1d9 0x4
KVM: entry failed, hardware error 0xffffffff
EAX=00000004 EBX=00000000 ECX=000001d9 EDX=00000000
Fix this by never intercepting MSR_IA32_DEBUGCTLMSR for SEV-ES guests.
No additional save/restore logic is required since MSR_IA32_DEBUGCTLMSR
is of swap type A.
o KVM will disable LBRV if userspace sets MSR_IA32_DEBUGCTLMSR before the
VMSA is encrypted. Fix this by moving LBRV enablement code post VMSA
encryption.
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 15.35.2 Enabling SEV-ES.
https://bugzilla.kernel.org/attachment.cgi?id=304653
Fixes: 376c6d285017 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Co-developed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-4-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. So, prevent SEV-ES guests when LBRV support is missing.
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 15.35.2 Enabling SEV-ES.
https://bugzilla.kernel.org/attachment.cgi?id=304653
Fixes: 376c6d285017 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-3-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM currently allows userspace to read/write MSRs even after the VMSA is
encrypted. This can cause unintentional issues if MSR access has side-
effects. For ex, while migrating a guest, userspace could attempt to
migrate MSR_IA32_DEBUGCTLMSR and end up unintentionally disabling LBRV on
the target. Fix this by preventing access to those MSRs which are context
switched via the VMSA, once the VMSA is encrypted.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-2-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After commit 1a80dbcb2dba, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation.
Fixes: 1a80dbcb2dba ("bpf: support deferring bpf_link dealloc to after RCU grace period")
Reported-by: syzbot+1989ee16d94720836244@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240602182703.207276-1-xiyou.wangcong@gmail.com
|
|
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.
Call Trace:
<TASK>
generic_exec_single+0x58/0x120
smp_call_function_single+0xbf/0x110
rdmsrl_on_cpu+0x46/0x60
intel_pstate_get_hwp_cap+0x1b/0x70
intel_pstate_update_limits+0x2a/0x60
acpi_processor_notify+0xb7/0x140
acpi_ev_notify_dispatch+0x3b/0x60
HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The iterator variable dst cannot be NULL and the if check can be removed.
Remove it and fix the following Coccinelle/coccicheck warning reported
by itnull.cocci:
ERROR: iterator variable bound on line 762 cannot be NULL
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240529101900.103913-2-thorsten.blum@toblux.com
|
|
TOMOYO project has moved to SourceForge.net .
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again. In addition the
interrupt register will need to be setup again so that link status
indication works again.
Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In JUMP_VIRT_ADDR we are performing an or calculation on address value
directly from pcaddi.
This will only work if we are currently running from direct 1:1 mapping
addresses or firmware's DMW is configured exactly same as kernel. Still,
we should not rely on such assumption.
Fix by overriding higher bits in address comes from pcaddi, so we can
get rid of or operator.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.
However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.
Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.
BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
NUMA enabled kernel on FDT based machine fails to boot because CPUs
are all in NUMA_NO_NODE and mm subsystem won't accept that.
Fix by adding them to default NUMA node at FDT parsing phase and move
numa_add_cpu(0) to a later point.
Cc: stable@vger.kernel.org
Fixes: 88d4d957edc7 ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
fdt_check_header(__dtb_start) will always success because kernel
provides a dummy dtb, and by coincidence __dtb_start clashed with
entry of this dummy dtb. The consequence is fdt passed from firmware
will never be taken.
Fix by trying to utilise __dtb_start only when CONFIG_BUILTIN_DTB is
enabled.
Cc: stable@vger.kernel.org
Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Both acpi_table_upgrade() and acpi_boot_table_init() are defined as
empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in
include/linux/acpi.h, there are no implicit declaration errors with
various configs.
#ifdef CONFIG_ACPI_TABLE_UPGRADE
void acpi_table_upgrade(void);
#else
static inline void acpi_table_upgrade(void) { }
#endif
#ifdef CONFIG_ACPI
...
void acpi_boot_table_init (void);
...
#else /* !CONFIG_ACPI */
...
static inline void acpi_boot_table_init(void)
{
}
...
#endif /* !CONFIG_ACPI */
As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary
here, just remove it. At the same time, just keep CONFIG_ACPI to prevent
potential build errors in future, and give a signal to indicate the code
is ACPI-specific. For the same reason, we also put acpi_table_upgrade()
under CONFIG_ACPI.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
|
|
TCP_CLOSE may or may not have current/rnext keys and should not be
considered "established". The fast-path for TCP_CLOSE is
SKB_DROP_REASON_TCP_CLOSE. This is what tcp_rcv_state_process() does
anyways. Add an early drop path to not spend any time verifying
segment signatures for sockets in TCP_CLOSE state.
Cc: stable@vger.kernel.org # v6.7
Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240529-tcp_ao-sk_state-v1-1-d69b5d323c52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently NCSI driver will send several NCSI commands back to back without
waiting the response of previous NCSI command or timeout in some state
when NIC have multi channel. This operation against the single thread
manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1)
According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe
one channel at a time by sending NCSI commands (Clear initial state, Get
version ID, Get capabilities...), than repeat this steps until the max
number of channels which we got from NCSI command (Get capabilities) has
been probed.
Fixes: e6f44ed6d04d ("net/ncsi: Package and channel management")
Signed-off-by: DelphineCCChiu <delphine_cc_chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
John Sperbeck reported that if we turn off CONFIG_RFS_ACCEL, the 'head'
is not defined, which will trigger compile error. So I move the 'head'
out of the CONFIG_RFS_ACCEL scope.
Fixes: 84b6823cd96b ("net: rps: protect last_qtail with rps_input_queue_tail_save() helper")
Reported-by: John Sperbeck <jsperbeck@google.com>
Closes: https://lore.kernel.org/all/20240529203421.2432481-1-jsperbeck@google.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530032717.57787-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The object "ax25_dev" is managed by reference counting. Thus it should
not be directly released by kfree(), replace with ax25_dev_put().
Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240530051733.11416-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<TASK>
? show_regs+0x64/0x70
? __warn+0x83/0x120
? refcount_warn_saturate+0xb2/0x100
? report_bug+0x158/0x190
? prb_read_valid+0x20/0x30
? handle_bug+0x3e/0x70
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xb2/0x100
? refcount_warn_saturate+0xb2/0x100
ax25_release+0x2ad/0x360
__sock_release+0x35/0xa0
sock_close+0x19/0x20
[...]
On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:
unregister_netdevice: waiting for ax0 to become free. Usage count = 0
This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release().
Fixes: 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Lars Kellogg-Stedman <lars@oddbit.com>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Dan Cross <crossd@gmail.com>
Tested-by: Chris Maness <christopher.maness@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240529210242.3346844-2-lars@oddbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2ececd3 ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.
For example, the following single queue scenario:
1. The dim worker of rxq0 is scheduled, and the dim status is
changed to DIM_APPLY_NEW_PROFILE;
2. dim is disabled or parameters have not been modified;
3. virtnet_rx_dim_work exits directly;
Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.
Fixes: 6208799553a8 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Statistic values should be set to ETHTOOL_STAT_NOT_SET even if the
device doesn't support statistics. Otherwise zeros will be returned as
if they are proper values:
host# ethtool -I -T lo
Time stamping parameters for lo:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
Statistics:
tx_pkts: 0
tx_lost: 0
tx_err: 0
Fixes: 0e9c127729be ("ethtool: add interface to read Tx hardware timestamping statistics")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240530040814.1014446-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Tristram Ha
Wen Gu
Subbaraya Sundeep
Ard Biesheuvel
Magnus Karlsson
Jiri Olsa
Tony Luck
Jan Beulich
Fuad Tabba
Jakub Kicinski
Jeff Johnson
Eric Dumazet
Matthias Stocker
Sean Christopherson
Ravi Bangoria
Nikunj A Dadhania
Cong Wang
Srinivas Pandruvada
Thorsten Blum
Tetsuo Handa
Huacai Chen
Jiaxun Yang
Tiezhu Yang
Linus Torvalds
Dmitry Safonov
DelphineCCChiu
Jason Xing
Duoming Zhou
Lars Kellogg-Stedman
Heng Qi
Vadim Fedorenko