aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/net/wireless/b43/main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-13b43: Load firmware from a work queue and not from the probe routineLarry Finger1-27/+32
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43 has such a structure, it must be changed. As this driver loads more than 1 firmware file, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05b43: prevent firmware on bcm5354 from taking over wrong GPIO pinsHauke Mehrtens1-0/+2
When using the bcm5354 (Soc with integrated LP-PHY Wifi) with a recent firmware >= 478.104 it runs out of memory after a very short time in OpenWrt after doing an active scan or any thing else where packages are send. This was cased by a gpio misconfiguration, the firmware triggered the GPIO pins used for buttons on some devices and that caused an other driver (OpenWrt diag) listening for these buttons irqs to send many messages to the user space. This patch fixes the bug for my devices (Asus WL-520GU) and makes it work with firmware 666.2. Now the firmware just uses LED GPIO pin number 1 and not the button pins any more. This is the GPIO Pin layout used on my device, see [0]. GPIO pin layout: pin# name type 0 power led 1 wlan led 2 reset button 3 ses buttom This is the nvram configuration output of "nvram show |grep gpio" related nvram configuration: wl0gpio2=11 wl0gpio3=11 wl0gpio0=11 wl0gpio1=0x02 reset_gpio=2 [0]: https://dev.openwrt.org/browser/trunk/package/broadcom-diag/src/diag.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-01Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville1-0/+2
2012-01-24b43: add maskset helpersRafał Miłecki1-48/+19
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18b43: add option to avoid duplicating device support with brcmsmacJohn W. Linville1-0/+2
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13wireless: b43: fix Oops on card eject during transferGuennadi Liakhovetski1-1/+4
An Oops has once been observed, when the SDIO card had been ejected during IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL. (I moved the NULL check before the lock, based upon a suggestion from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davemJohn W. Linville1-15/+40
Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell1-50/+50
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19b43: avoid packet losses in the dma worker code.francesco.gringoli@ing.unibs.it1-15/+40
Following Rafal request, we verified that on "modern" CPUs using one or more workers is equivalent. Here is patch V3 that addresses the packet loss bug in the dma engine using only one worker. ------- This patch addresses a bug in the dma worker code that keeps draining packets even when the hardware queues are full. In such cases packets can not be passed down to the device and are erroneusly dropped by the code. This problem was already discussed here http://www.mail-archive.com/b43-dev@lists.infradead.org/msg01413.html and acknowledged by Michael. Number of hardware queues is now defined in b43.h (B43_QOS_QUEUE_NUM). Acknowledgements to Riccardo Paolillo <riccardo.paolillo@gmail.com> and Michele Orru <michele.orru@hotmail.it> Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31drivers/net: change moduleparam.h to module.h as required.Paul Gortmaker1-1/+1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-03mac80211: pass vif param to conf_tx() callbackEliad Peller1-1/+2
tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27b43: update dummy transmissionRafał Miłecki1-4/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27b43: add missing MMIO definesRafał Miłecki1-17/+21
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mac80211: add ieee80211_vif param to tsf functionsEliad Peller1-2/+3
TSF can be kept per vif. Add ieee80211_vif param to set/get/reset_tsf, and move the debugfs entries to the per-vif directory. Update all the drivers that implement these callbacks. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville1-1/+2
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-19b43: Fix beacon problem in ad-hoc modeManual Munz1-1/+2
In ad-hoc mode, driver b43 does not issue beacons. Signed-off-by: Manual Munz <freifunk@somakoma.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14b43: add my copyrights and myself as the module authorRafał Miłecki1-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: minor fixesRafał Miłecki1-0/+1
The biggest change is reversing order of reading 32-bit table value. MMIO dumps has shown it's done that way for LCN-PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29b43: Fix swatch warningLarry Finger1-1/+4
Swatch reports the following warning for main.c: CHECK drivers/net/wireless/b43/main.c drivers/net/wireless/b43/main.c +4115 b43_wireless_core_stop(7) warn: variable dereferenced before check 'dev' After analysis, this is not a bug, but a false warning. Nonetheless, a cleanup is in order to prevent some future janitor proposing the wrong fix, as I did in my original patch. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26b43: drop Kconfig option of forcing PIO modeRafał Miłecki1-1/+1
We have module param called use_pio which is much easier to use. Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43/legacy: Remove firmware IDsMichael Büsch1-3/+1
This removes the "FWxx" ID strings from the b43 and b43legacy drivers. They were once used to match a specific driver revision to a set of firmware files. However, this is hardly useful today. Additionally, the IDs are not updated and maintained properly, so they might mislead users. Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: warn when forcing PIO modeRafał Miłecki1-2/+7
We have resolved all the known issues with DMA mode, however some users (or distros) are still forcing PIO mode by config files. Without debugging enabled it's not noticable at all. Add the warning for them. Cc: Gregory Bellier <gregory.bellier@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: include HT-PHY in some common codeRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: support new TX header, noticed to be used by 598.314+ fwRafał Miłecki1-1/+3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: use enum for firmware header formatRafał Miłecki1-1/+5
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: reload phy and bss settings after core restartsFelix Fietkau1-5/+37
b43_op_config and b43_op_bss_info_changed apply many settings by directly writing to hardware registers. These settings are lost as soon as the core is restarted and the initvals are reloaded. This was discovered because restarting hostapd led to the beacon interval getting set to ~33s (see https://dev.openwrt.org/ticket/8033 for more information). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09b43: add core rev 17 used on bcma SoC.Hauke Mehrtens1-0/+1
This ieee80211 core was found on a Netgear wndr3400. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08b43: remove wireless extensions inclusionsJohannes Berg1-1/+0
linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-27Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6David S. Miller1-2/+3
2011-07-26Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davemJohn W. Linville1-2/+3
2011-07-26b43: fix invalid memory access in b43_ssb_remove()Pavel Roskin1-2/+3
wldev is freed in b43_one_core_detach() and should not be accessed after that call. Keep wldev->dev in a local variable. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-25Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-22Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davemJohn W. Linville1-21/+85
2011-07-22b43: (un)initialize driver on the BCMA busRafał Miłecki1-4/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: bcma: implement full core resetRafał Miłecki1-7/+27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: correctly display longer chipsets idsRafał Miłecki1-2/+5
Some of the newer Broadcom chipsets have longe names like BCM43224, BCM43225, etc. However Broadcom decided to keep using u16 for storing them. Use %X or %d depending on chip_id value to avoid BCMA8D8, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: bcma: read info about supported bandsRafał Miłecki1-6/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19b43: use agent R/W ops for BCMA_IOCTLRafał Miłecki1-2/+2
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use special R/W ops for it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davemJohn W. Linville1-77/+284
Conflicts: net/bluetooth/l2cap_core.c
2011-07-08net/b43: don't return IRQ_HANDLED if nothing was doneSebastian Andrzej Siewior1-1/+1
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: define firmwares for HT and LCN PHYsRafał Miłecki1-0/+40
We were uploading different firmwares to the hardware until finding responding one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY add place for new PHY supportRafał Miłecki1-0/+10
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: read radio ID on new coresRafał Miłecki1-1/+13
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: use radio ID reading code to older cores onlyRafał Miłecki1-15/+23
Newer ones need separated way Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: change selecting ucode for newer coresRafał Miłecki1-9/+17
Older cores had unique PHY. This is not true anymore for newer ones. For example core rev 16 can be LP, SSLPN or N (PHY). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: bus: add helpers for getting/setting wldev from/in bus coreRafał Miłecki1-3/+3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: handle BCMA in bus switchesRafał Miłecki1-0/+68
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: use switches for SSB specific codeRafał Miłecki1-45/+99
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: implement BCMA bus opsRafał Miłecki1-0/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: make b43_wireless_init bus genericRafał Miłecki1-4/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.