| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA1 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_tx_timestamp() is used for tx software timestamp enabled by
SOF_TIMESTAMPING_TX_SOFTWARE while SKBTX_HW_TSTAMP is used for
SOF_TIMESTAMPING_TX_HARDWARE. As it clearly shows they are different
timestamps in two dimensions, it's not appropriate to group these two
together in the if-statement.
This patch completes three things:
1. make the software one standalone. Users are able to set both
timestamps together with SOF_TIMESTAMPING_OPT_TX_SWHW flag.
2. make the software one generated after the hardware timestamp logic to
avoid generating sw and hw timestamps at one time without
SOF_TIMESTAMPING_OPT_TX_SWHW being set.
3. move the software timestamp call as close to the door bell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250508034433.14408-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This value is never read, so it's not needed. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-16-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
There are a number of MAC parameters that are in the iwl_cfg
(which is the last config matched to the MAC/RF combination).
This isn't necessary, there are many more of those than MACs,
so move (most of) the data into the MAC family config struct.
Note that DCCM information remains for use by older devices,
and on 9000 series it'll be in struct iwl_cfg but be ignored
when the CRF is in a Qu/So platform.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is only used with old-style debug dump, which isn't
supported on newer devices, so remove the data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since 22000 series, the data is read by the firmware and the
driver doesn't need to know, remove the useless setting.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
These are (going to be) base MAC parameters that are identical
even for different platforms with the same MAC, so rename the
structure accordingly, calling it iwl_family_base_params.
Also rename the pointer to it so the dereferencing is a bit
shorter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This field is always set for >= 9000 series, but then we
already check that, so it's not needed. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This field is unused, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since 9000 series devices, the devices are split into MAC and
CRF parts. Currently, "struct iwl_cfg" reflects some MAC and
some RF parameters, but we want to clean this up and move the
MAC data to what's now "struct iwl_cfg_trans_params". As the
first step, to reflect the intent, rename this structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
There's no need to pass various different pointers when
the transport is already established, so just pass that
instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This value hasn't been used since unified firmware in 22000
series, so there's no need to set the value for that or
newer devices. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Instead of using fw_name_pre, handle the cc firmware file
name specially in iwl_drv_get_fwname_pre() for the cc MAC
type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add support for the TY MAC (discrete device) and GF4 RF to
the list of MAC/RF types, and use that to remove fw_name_pre
for the ax210 family devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is never used, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since JF RF always uses b0 step and QuZ MAC always uses
a0 step for firmware, there's no need for these configs
that just force the steps to those values. Remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is more maintainable than the fw_name_pre prefix, and
requires fewer duplicate structs as well. Since only b0 FW
exists, override the MAC/RF steps for these devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is needed, otherwise we don't know what to do and will
not find the correct firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-16-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
These are test chips, not available to users, and not even listed
in the PCI IDs table (so the driver won't bind them). There's no
reason to list specific devices with them in the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
With just a handful of values in two bytes, the params are
smaller than the pointer to them. Inline them and save some
space.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since there's no HT on 6 GHz, only HE, the HT capabilities
are never initialized, and so the ht40_bands value is never
checked for the 6 GHz band. Remove the misleading value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The driver must not hold the wiphy mutex when unregistering the thermal
devices. Do not hold the lock for the call to iwl_mld_thermal_exit and
only do a lock/unlock to cancel the ct_kill_exit_wk work.
The problem is that iwl_mld_tzone_get_temp needs to take the wiphy lock
while the thermal code is holding its own locks already. When
unregistering the device, the reverse would happen as the driver was
calling thermal_cooling_device_unregister with the wiphy mutex already
held.
It is not likely to trigger this deadlock as it can only happen if the
thermal code is polling the temperature while the driver is being
unloaded. However, lockdep reported it so fix it.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
rx_omi::finished_work is initialized when the containing link is.
If the worker was queued and then an error happened, we will get to
iwl_mld_init_link from the reconfig and initialize the work after it was
queued.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Different hardware has a different maximum power consumption and the
BIOS can also define a power limit for the device. Add code to select
an appropriate maximum power budget for the device and configure that
instead of using a hardcoded table.
This removes the old table. It does not work with the variable upper
limit and the there should be no consumer that requires these exact step
values.
This considerably increases the power budget for some devices and can
prevent throttling in high traffic situations.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Different hardware has a different maximum power consumption and the
BIOS can also define a power limit for the device. Add code to select
an appropriate maximum power budget for the device and configure that
instead of using a hardcoded table.
This removes the old table. It does not work with the variable upper
limit and the there should be no consumer that requires these exact step
values.
This considerably increases the power budget for some devices and can
prevent throttling in high traffic situations.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The compare_temps function in both mvm and mld dropped the const
qualifier in a cast in a way that makes -Werror=cast-qual unhappy. Add
the const to the cast to fix this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This function is not implemented nor called. Remove its declaration.
Link: https://patch.msgid.link/20250506194102.3407967-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add support for a new version of link configuration command
which includes NPCA and high priority TX traffic support for wifi8.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add a new version of mac configuration command
which includes UHR support indication.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add a new version of sta configuration command
which includes these wifi8 features:
1. LDPC X2 CW size support indication
2. Indication if ICF frame is needed instead of RTS
3. support for MIC padding delays for protected control frames
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Range response version 10 removes the rx and tx rates fields.
These fields aren't used by the driver anyway, so no change is
needed to support it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since the FW is the one to assign an ID to a BA, it can happen that
the FW sends a bar_frame_release_notif before the driver had the chance to
allocate the BAID.
Convert the IWL_FW_CHECK into a regular debug print.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add internal loopback support for i.MX95 ENETC PF, the default loopback
mode is MAC level loopback, the MAC Tx data is looped back onto the Rx.
The MAC interface runs at a fixed 1:8 ratio of NETC clock in MAC-level
loopback mode, with no dependency on Tx clock.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-15-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the offsets of the VLAN hash filter registers of ENETC v4 are
different from ENETC v1. Therefore, enetc_set_si_vlan_ht_filter() is
added to set the correct VLAN hash filter based on the SI ID and ENETC
revision, so that ENETC v4 PF driver can reuse enetc_vlan_rx_add_vid()
and enetc_vlan_rx_del_vid(). In addition, the VLAN promiscuous mode will
be enabled if VLAN filtering is disabled, which means that PF qualifies
for reception of all VLAN tags.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-14-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VLAN hash filters of ENETC v1 and v4 are basically the same, the only
difference is that the offset of the VLAN hash filter registers has been
changed in ENETC v4. So some functions like enetc_vlan_rx_add_vid() and
enetc_vlan_rx_del_vid() only need to be slightly modified to be reused
by ENETC v4. Currently, we just move these functions from enetc_pf.c to
enetc_pf_common.c. Appropriate modifications will be made for ENETC4 in
a subsequent patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-13-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the common function enetc_refresh_vlan_ht_filter() from
enetc_sync_vlan_ht_filter() so that it can be reused by the ENETC
v4 PF and VF drivers in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-12-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Receive side scaling (RSS) is a network driver technology that enables
the efficient distribution of network receive processing across multiple
CPUs in multiprocessor systems. Therefore, it is better to enable RSS by
default so that the CPU load can be balanced and network performance can
be improved when then network is enabled.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-11-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Actually enetc_set_rss() does not need a return value, so change its
type to void.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compared with LS1028A, there are two main differences: first, i.MX95
ENETC uses NTMP 2.0 to manage the RSS table, and second, the offset
of the RSS Key registers is different. Some modifications have been
made in the previous patches based on these differences to ensure that
the relevant interfaces are compatible with i.MX95. So it's time to
add RSS support to i.MX95 ENETC PF.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the offset of the RSS key registers of i.MX95 ENETC is different
from that of LS1028A, so add enetc_get_rss_key_base() to get the base
offset for the different chips, so that enetc_set_rss_key() can be
reused for this trivial thing.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since i.MX95 ENETC (v4) uses NTMP 2.0 to manage the RSS table, which is
different from LS1028A ENETC (v1). In order to reuse some functions
related to the RSS table, so add .get_rss_table() and .set_rss_table()
hooks to enetc_si_ops.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC's MAC filter consists of hash MAC filter and exact MAC filter.
Hash MAC filter is a 64-bit entry hash table consisting of two 32-bit
registers. Exact MAC filter is implemented by configuring MAC address
filter table through command BD ring. The table is stored in ENETC's
internal memory and needs to be read through command BD ring. In order
to facilitate debugging, added a debugfs interface to get the relevant
information about MAC filter.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The i.MX95 ENETC supports both MAC hash filter and MAC exact filter. MAC
hash filter is implenented through a 64-bit hash table to match against
the hashed addresses, PF and VFs each have two MAC hash tables, one is
for unicast and the other one is for multicast. But MAC exact filter is
shared between SIs (PF and VFs), each table entry contains a MAC address
that may be unicast or multicast and the entry also contains an SI bitmap
field that indicates for which SIs the entry is valid.
For i.MX95 ENETC, MAC exact filter only has 4 entries. According to the
observation of the system default network configuration, the MAC filter
will be configured with multiple multicast addresses, so MAC exact filter
does not have enough entries to implement multicast filtering. Therefore,
the current MAC exact filter is only used for unicast filtering. If the
number of unicast addresses exceeds 4, then MAC hash filter is used.
Note that both MAC hash filter and MAC exact filter can only be accessed
by PF, VFs can notify PF to set its corresponding MAC filter through the
mailbox mechanism of ENETC. But currently MAC filter is only added for
i.MX95 ENETC PF. The MAC filter support of ENETC VFs will be supported in
subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although only ENETC PF can access the MAC address filter table, the table
entries can specify MAC address filtering for one or more SIs based on
SI_BITMAP, which means that the table also supports MAC address filtering
for VFs.
Currently, only the ENETC v1 PF driver supports MAC address filtering. In
order to add the MAC address filtering support for the ENETC v4 PF driver
and VF driver in the future, the relevant generic interfaces are moved to
the enetc-core driver. This lays the basis for i.MX95 ENETC PF and VFs to
support MAC address filtering.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The command BD ring is used to configure functionality where the
underlying resources may be shared between different entities or being
too large to configure using direct registers (such as lookup tables).
Because the command BD and table formats of i.MX95 and LS1028A are very
different, the software processing logic is also different. So add
enetc4_setup_cbdr() and enetc4_teardown_cbdr() for ENETC v4 drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After a recent change [1] in clang's randstruct implementation to
randomize structures that only contain function pointers, there is an
error because qede_ll_ops get randomized but does not use a designated
initializer for the first member:
drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer
206 | {
| ^
Explicitly initialize the common member using a designated initializer
to fix the build.
Cc: stable@vger.kernel.org
Fixes: 035f7f87b729 ("randstruct: Enable Clang support")
Link: https://github.com/llvm/llvm-project/commit/04364fb888eea6db9811510607bed4b200bcb082 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add usb_free_urb() in the error path to prevent memory leak.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Link: https://patch.msgid.link/aA3_maPlEJzO7wrL@pc
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
Vladimir Oltean
Jason Xing
Dave Ertman
Johannes Berg
Benjamin Berg
Miri Korenblit
Yedidya Benshimol
Avraham Stern
Wei Fang
Nathan Chancellor
Salah Triki