path: root/drivers/net (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-16wireguard: netlink: avoid variable-sized memcpy on sockaddrHEADstableJason A. Donenfeld1-7/+6
Doing a variable-sized memcpy is slower, and the compiler isn't smart enough to turn this into a constant-size assignment. Further, Kees' latest fortified memcpy will actually bark, because the destination pointer is type sockaddr, not explicitly sockaddr_in or sockaddr_in6, so it thinks there's an overflow: memcpy: detected field-spanning write (size 28) of single field "&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16) Fix this by just assigning by using explicit casts for each checked case. Cc: Kees Cook <keescook@chromium.org> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-16wireguard: ratelimiter: disable timings test by defaultJason A. Donenfeld1-15/+10
A previous commit tried to make the ratelimiter timings test more reliable but in the process made it less reliable on other configurations. This is an impossible problem to solve without increasingly ridiculous heuristics. And it's not even a problem that actually needs to be solved in any comprehensive way, since this is only ever used during development. So just cordon this off with a DEBUG_ ifdef, just like we do for the trie's randomized tests, so it can be enabled while hacking on the code, and otherwise disabled in CI. In the process we also revert 151c8e499f47. Fixes: 151c8e499f47 ("wireguard: ratelimiter: use hrtimer in selftest") Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-16net: team: Unsync device addresses on ndo_stopBenjamin Poirier1-6/+18
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier1-12/+35
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier2-14/+7
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: marvell: prestera: add support for for Aldrin2Oleksandr Mazur1-0/+1
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-13net: phy: aquantia: wait for the suspend/resume operations to finishIoana Ciornei1-4/+49
The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-09ipvlan: Fix out-of-bound bugs caused by unset skb->mac_headerLu Wei1-2/+4
If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-08iavf: Fix cached head and tail value for iavf_get_tx_pendingBrett Creeley1-1/+4
The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08iavf: Fix change VF's mac addressSylwester Dziedziuch1-6/+3
Previously changing mac address gives false negative because ip link set <interface> address <MAC> return with RTNLINK: Permission denied. In iavf_set_mac was check if PF handled our mac set request, even before filter was added to list. Because this check returns always true and it never waits for PF's response. Move iavf_is_mac_handled to wait_event_interruptible_timeout instead of false. Now it will wait for PF's response and then check if address was added or rejected. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08ice: Fix crash by keep old cfg when update TCs more than queuesDing Hui1-16/+26
There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. Fixes: a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Reviewed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08ice: Don't double unplug aux on peer initiated resetDave Ertman1-2/+0
In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.815796] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.815797] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.815798] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.815801] cpuidle_enter+0x29/0x40 [ 662.815803] do_idle+0x261/0x2b0 [ 662.815807] cpu_startup_entry+0x19/0x20 [ 662.815809] start_secondary+0x114/0x150 [ 662.815813] secondary_startup_64_no_verify+0xd5/0xdb [ 662.815818] </TASK> [ 662.815846] bad: scheduling from the idle thread! [ 662.815849] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S W OE 5.17.1 #2 [ 662.815852] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815853] Call Trace: [ 662.815855] <IRQ> [ 662.815856] dump_stack_lvl+0x33/0x42 [ 662.815860] dequeue_task_idle+0x20/0x30 [ 662.815863] __schedule+0x1c3/0x990 [ 662.815868] schedule+0x44/0xc0 [ 662.815871] schedule_preempt_disabled+0x14/0x20 [ 662.815873] __mutex_lock.isra.11+0x3a8/0x490 [ 662.815876] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815904] device_del+0x37/0x3d0 [ 662.815909] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815937] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815961] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815979] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815985] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.816011] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.816033] __handle_irq_event_percpu+0x4c/0x180 [ 662.816037] handle_irq_event_percpu+0xf/0x40 [ 662.816039] handle_irq_event+0x34/0x60 [ 662.816042] handle_edge_irq+0x9a/0x1c0 [ 662.816045] __common_interrupt+0x62/0x100 [ 662.816048] common_interrupt+0xb4/0xd0 [ 662.816052] </IRQ> [ 662.816053] <TASK> [ 662.816054] asm_common_interrupt+0x1e/0x40 [ 662.816057] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.816060] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.816063] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.816065] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.816067] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.816068] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.816070] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.816071] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.816075] cpuidle_enter+0x29/0x40 [ 662.816077] do_idle+0x261/0x2b0 [ 662.816080] cpu_startup_entry+0x19/0x20 [ 662.816083] start_secondary+0x114/0x150 [ 662.816087] secondary_startup_64_no_verify+0xd5/0xdb [ 662.816091] </TASK> [ 662.816169] bad: scheduling from the idle thread! The correct place to unplug the aux devices for a reset is in the prepare_for_reset function, as this is a common place for all reset flows. It also has built in protection from being called twice in a single reset instance before the aux devices are replugged. Fixes: f9f5301e7e2d4 ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08net: phy: lan87xx: change interrupt src of link_up to comm_readyArun Ramadoss1-4/+54
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-07net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skbLorenzo Bianconi1-0/+3
Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clearLorenzo Bianconi1-1/+1
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_setVladimir Oltean1-2/+2
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprioVladimir Oltean1-43/+79
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packetVladimir Oltean1-4/+31
The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-06net: usb: qmi_wwan: add Quectel RM520Njerry.meng1-0/+1
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_dataChristian Marangi1-1/+1
of_device_get_match_data is called on priv->dev before priv->dev is actually set. Move of_device_get_match_data after priv->dev is correctly set to fix this kernel panic. Fixes: 3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-05stmmac: intel: Simplify intel_eth_pci_remove()Christophe JAILLET1-2/+0
There is no point to call pcim_iounmap_regions() in the remove function, this frees a managed resource that would be release by the framework anyway. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman1-2/+2
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05bonding: accept unsolicited NA messageHangbin Liu1-5/+12
The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05bonding: use unspecified address if no available link local addressHangbin Liu1-0/+3
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get available source address and send IPv6 neighbor solicit message. If the target is global address, ipv6_dev_get_saddr() will get any available src address. But if the target is link local address, ipv6_dev_get_saddr() will only get available address from our interface, i.e. the corresponding bond interface. But before bond interface up, all the address is tentative, while ipv6_dev_get_saddr() will ignore tentative address. This makes we can't find available link local src address, then bond_ns_send() will not be called and no NS message was sent. Finally bond interface will keep in down state. Fix this by sending NS with unspecified address if there is no available source address. Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211_hwsim: check length for virtio packetsSoenke Huster1-1/+6
An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03net: dsa: microchip: fix kernel oops on ksz8 switchesOleksij Rempel1-6/+24
After driver refactoring we was running ksz9477 specific CPU port configuration on ksz8 family which ended with kernel oops. So, make sure we run this code only on ksz9477 compatible devices. Tested on KSZ8873 and KSZ9477. Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03xen-netback: only remove 'hotplug-status' when the vif is actually destroyedPaul Durrant1-1/+1
Removing 'hotplug-status' in backend_disconnected() means that it will be removed even in the case that the frontend unilaterally disconnects (which it is free to do at any time). The consequence of this is that, when the frontend attempts to re-connect, the backend gets stuck in 'InitWait' rather than moving straight to 'Connected' (which it can do because the hotplug script has already run). Instead, the 'hotplug-status' mode should be removed in netback_remove() i.e. when the vif really is going away. Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net: fec: Use a spinlock to guard `fep->ptp_clk_on`Csókás Bence3-27/+19
Mutexes cannot be taken in a non-preemptible context, causing a panic in `fec_ptp_save_state()`. Replacing `ptp_clk_mutex` by `tmreg_lock` fixes this. Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled") Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/ Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6 Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: fec: add pm_qos support on imx6q platformWei Fang2-1/+13
There is a very low probability that tx timeout will occur during suspend and resume stress test on imx6q platform. So we add pm_qos support to prevent system from entering low level idles which may affect the transmission of tx. Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02iavf: Detach device during reset taskIvan Vecera1-3/+11
iavf_reset_task() takes crit_lock at the beginning and holds it during whole call. The function subsequently calls iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs when userspace initiates during the reset task any ndo callback that runs under RTNL like iavf_open() because some of that functions tries to take crit_lock. This leads to classic A-B B-A deadlock scenario. To resolve this situation the device should be detached in iavf_reset_task() prior taking crit_lock to avoid subsequent ndos running under RTNL and reattach the device at the end. Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Tested-by: Vitaly Grinberg <vgrinber@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix kernel crash during module removalIvan Vecera1-1/+4
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix ADQ rate limiting for PFPrzemyslaw Patynowski2-1/+5
Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: use bitmap_free instead of devm_kfreeMichal Swiatkowski1-1/+1
pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: Fix DMA mappings leakPrzemyslaw Patynowski4-17/+79
Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done Fixes: 617f3e1b588c ("ice: xsk: allocate separate memory for XDP SW ring") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-01Revert "net: phy: meson-gxl: improve link-up behavior"Heiner Kallweit1-7/+1
This reverts commit 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93. Meanwhile it turned out that the following commit is the proper workaround for the issue that 2c87c6f9fbdd tries to address. a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up") It's nor clear why the to be reverted commit helped for one user, for others it didn't make a difference. Fixes: 2c87c6f9fbdd ("net: phy: meson-gxl: improve link-up behavior") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8deeeddc-6b71-129b-1918-495a12dc11e3@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31mlxbf_gige: compute MDIO period based on i1clkDavid Thompson3-18/+110
This patch adds logic to compute the MDIO period based on the i1clk, and thereafter write the MDIO period into the YU MDIO config register. The i1clk resource from the ACPI table is used to provide addressing to YU bootrecord PLL registers. The values in these registers are used to compute MDIO period. If the i1clk resource is not present in the ACPI table, then the current default hardcorded value of 430Mhz is used. The i1clk clock value of 430MHz is only accurate for boards with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs have i1clk = 500MHz, but can support a slower MDIO period. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handlerDuoming Zhou1-1/+1
The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-30net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()Dan Carpenter1-1/+4
Don't just print a warning. Clean up and return an error as well. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30nfp: fix the access to management firmware hangingGao Xiao1-0/+1
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <gao.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220829101651.633840-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30net: phy: micrel: Make the GPIO to be non-exclusiveHoratiu Vultur1-1/+7
The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_cmd()Stanislaw Gruszka1-4/+1
This reverts commit a8eb8e6f7159c7c20c0ddac428bde3d110890aa7 as it can cause invalid link quality command sent to the firmware and address the off-by-one issue by fixing condition of while loop. Cc: stable@vger.kernel.org Fixes: a8eb8e6f7159 ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl
2022-08-30wifi: wilc1000: fix DMA on stack objectsAjay.Kathat@microchip.com3-8/+47
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able. Fixes: 5625f965d764 ("wilc1000: move wilc driver out of staging") Reported-by: Michael Walle <mwalle@kernel.org> Suggested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Tested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior9-42/+42
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29net: dsa: xrs700x: Use irqsave variant for u64 stats updateSebastian Andrzej Siewior1-2/+3
xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29ieee802154: cc2520: add rc code in cc2520_tx()Li Qiong1-0/+1
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW". Assign rc code with '-EINVAL' at this error path to fix it. Signed-off-by: Li Qiong <liqiong@nfschina.com> Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-08-27r8152: add PID for the Lenovo OneLink+ DockJean-Francois Le Fillatre2-0/+10
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26nfp: flower: fix ingress police using matchall filterTianyu Yuan1-2/+3
Referenced commit introduced nfp_policer_validate in the progress installing rate limiter. This validate check the action id and will reject police with CONTINUE, which is required to support ingress police offload. Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action id in nfp_policer_validate Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220825080845.507534-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: smsc911x: Stop and start PHY during suspend and resumeFlorian Fainelli1-0/+6
Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not properly stopping and restarting the PHY during suspend/resume. Correct that by indicating that the MAC is in charge of PHY PM operations and ensure that all MDIO bus activity is quiescent during suspend. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Fixes: 2aa70f864955 ("net: smsc911x: Quieten netif during suspend") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26tg3: Disable tg3 device on system reboot to avoid triggering AERKai-Heng Feng1-2/+6
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/ BugLink: https://bugs.launchpad.net/bugs/1917471 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: sparx5: fix handling uneven length packets in manual extractionCasper Andersson1-0/+2
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would have the checksum included up to next multiple of 4 (a 77 bytes packet would have 3 bytes of ethernet checksum included). The check for the value expects it in host (Little) endian. Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>