| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support to pass link-down notification to the endpoint function
driver so that it can process the LINK_DOWN event.
Link: https://lore.kernel.org/r/20230720135834.1977616-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.
Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.
Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
|
|
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled.
Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
|
|
During domain reset process vmd_domain_reset() clears PCI
configuration space of VMD root ports. But certain platform
has observed following errors and failed to boot.
...
DMAR: VT-d detected Invalidation Queue Error: Reason f
DMAR: VT-d detected Invalidation Time-out Error: SID ffff
DMAR: VT-d detected Invalidation Completion Error: SID ffff
DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: Invalidation Time-out Error (ITE) cleared
The root cause is that memset_io() clears prefetchable memory base/limit
registers and prefetchable base/limit 32 bits registers sequentially.
This seems to be enabling prefetchable memory if the device disabled
prefetchable memory originally.
Here is an example (before memset_io()):
PCI configuration space for 10000:00:00.0:
86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00
00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20
00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00
...
So, prefetchable memory is ffffffff00000000-575000fffff, which is
disabled. When memset_io() clears prefetchable base 32 bits register,
the prefetchable memory becomes 0000000000000000-575000fffff, which is
enabled and incorrect.
Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:
The Prefetchable Memory Limit register must be programmed to a smaller
value than the Prefetchable Memory Base register if there is no
prefetchable memory on the secondary side of the bridge.
This is believed to be the reason for the failure and in addition the
sequence of operation in vmd_domain_reset() is not following the PCIe
specs.
Disable the bridge window by executing a sequence of operations
borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(),
that comply with the PCI specifications.
Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
The i.MX integration for the DesignWare PCI controller has a _host_exit()
operation which undoes everything that the _host_init() operation does but
does not wire this up as the host_deinit callback for the core, or call it
in any path other than suspend. This means that if we ever unwind the
initial probe of the device, for example because it fails, the regulator
core complains that the regulators for the device were left enabled:
imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128
Wire up the callback so that the core can clean up after itself.
Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC is leading to an extremely large _init() function and some
unnatural code flow. Re-partition the code so that some tasks are done
in a _probe() routine, which calls pci_host_common_probe() and then use
a much smaller _init() function, mainly to enable interrupts after
address translation tables are set up.
Link: https://lore.kernel.org/r/20230728131401.1615724-8-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero. Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hardware registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.
Link: https://lore.kernel.org/r/20230728131401.1615724-7-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Refactor interrupt handling in _init() function into
disable_interrupts(), init_interrupts(), clear_sec_errors() and clear
ded_errors() because current code is unwieldy and prone to bugs.
Disable interrupts as soon as possible and only enable interrupts after
address translation is setup to prevent spurious axi2pcie and pcie2axi
translation errors being reported.
Link: https://lore.kernel.org/r/20230728131401.1615724-6-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Minor re-organisation so that event handlers can access both a pointer
to the bridge area of the PCIe Root Port and the control area of the PCIe
Root Port.
Link: https://lore.kernel.org/r/20230728131401.1615724-5-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Minor code re-organisation so that macros representing registers ascend in
numerical order and use the same names as their hardware documentation.
Removed registers not used by the driver.
Link: https://lore.kernel.org/r/20230728131401.1615724-4-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Enable building driver as a module. The expected use case is the
driver is built as a module, is installed when needed, and cannot be
removed once installed since it is not possible to clean-up
the irq_chip data structures on removal, as described in:
https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
The driver has .suppress_bind_attrs set to true for the same
reasons (ie prevent unbinding, that would leave the kernel
with stale IRQ configuration that cannot be cleaned up).
Link: https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20230728131401.1615724-3-daire.mcnamara@microchip.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.
Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-2-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
b3574f579ece ("PCI: mvebu: Mark driver as BROKEN") made it impossible to
enable the pci-mvebu driver. The driver does have known problems, but as
Russell and Uwe reported, it does work in some configurations, so removing
it broke some working setups.
Revert b3574f579ece so pci-mvebu is available.
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/ZMzicVQEyHyZzBOc@shell.armlinux.org.uk
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230804134622.pmbymxtzxj2yfhri@pengutronix.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating
the hierarchy.
Consider an Endpoint that supports only MPS=128. In the default situation
(CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux
tries to configure the MPS of every device to match the upstream bridge.
If the Endpoint is directly below the Root Port, Linux can reduce the Root
Port MPS to 128 to match the Endpoint. But if there's a switch in the
middle, Linux doesn't reduce the Root Port MPS because other devices below
the switch may already be configured with MPS larger than 128.
This scenario results in uncorrectable Malformed TLP errors if the Root
Port sends TLPs with payloads larger than 128 bytes. These errors can
be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't
seem to be a good idea to always have this parameter even for basic
functionality to work.
Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload") so the Root Ports default to MPS=128, which all devices
support.
If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to
get the benefit of larger MPS settings.
[bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at
the top, add missing acked by tag]
Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload")
Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org # v6.0-rc1+
|
|
This reverts commit da56a1bfbab55189595e588f1d984bdfb5cf5924.
Bjorn Andersson, Fabio Estevam, Xiaolei Wang, and Jon Hunter reported that
da56a1bfbab5 ("PCI: dwc: Wait for link up only if link is started") broke
controller probing by returning an error in case the link does not come up
during host initialisation, for example when the slot is empty.
As explained in commit 886a9c134755 ("PCI: dwc: Move link handling into
common code") and as indicated by the comment "Ignore errors, the link may
come up later" in the code, waiting for link up and ignoring errors is the
intended behaviour:
Let's standardize this to succeed as there are usecases where devices
(and the link) appear later even without hotplug. For example, a
reconfigured FPGA device.
Reverting the offending commit specifically fixes a regression on Qualcomm
platforms like the Lenovo ThinkPad X13s which no longer reach the
interconnect sync state if a slot does not have a device populated (e.g. an
optional modem).
Note that enabling asynchronous probing by default as was done for Qualcomm
platforms by commit c0e1eb441b1d ("PCI: qcom: Enable async probe by
default"), should take care of any related boot time concerns.
Finally, note that the intel-gw driver is the only driver currently not
providing a .start_link() callback and instead starts the link in its
.host_init() callback, which may avoid an additional one-second timeout
during probe by making the link-up wait conditional. If anyone cares, that
can be done in a follow-up patch with a proper motivation.
[bhelgaas: add Fabio Estevam, Xiaolei Wang, Jon Hunter reports]
Fixes: da56a1bfbab5 ("PCI: dwc: Wait for link up only if link is started")
Link: https://lore.kernel.org/r/20230706082610.26584-1-johan+linaro@kernel.org
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230704122635.1362156-1-festevam@gmail.com/
Reported-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20230705010624.3912934-1-xiaolei.wang@windriver.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/6ca287a1-6c7c-7b90-9022-9e73fb82b564@nvidia.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Sajid Dalvi <sdalvi@google.com>
Cc: Ajay Agarwal <ajayagarwal@google.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.
Replace 32-bit mask by appropriate 64-bit mask.
[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/pcie-microchip-host.c:866:32: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-3-kwilczynski@kernel.org
Link: https://lore.kernel.org/linux-pci/20230511-pci-microchip-clk-cast-v1-1-7674f4d4e218@kernel.org
Link: https://lore.kernel.org/linux-pci/20230111125323.1911373-3-daire.mcnamara@microchip.com
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Co-developed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pcie-keembay.c:172:12: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void(*)(void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 0c87f90b4c13 ("PCI: keembay: Add support for Intel Keem Bay")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-2-kwilczynski@kernel.org
Acked-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pci-meson.c:191:6: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-1-kwilczynski@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323074553.90372-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090011.66754-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090431.73526-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323091644.91981-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.
This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.
Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.
[kwilczynski: commit log]
Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Replace low-level property access functions like of_get_property() and
of_find_property() with their typed equivalents (i.e., of_property_read_<type>
functions), as it's preferred to use typed property access functions for
reading properties.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230609193326.1963542-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
|
|
The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.
Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.
Thus, swap the order of the two calls so that the correctly initialized
value is then used.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
|
|
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
|
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
|
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
- Convert platform_device .remove() callbacks to return void instead of a
mostly useless int (Uwe Kleine-König)
* pci/controller/remove-void-callbacks:
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
|
|
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
from "PCI Endpoint NTB driver" (Shunsuke Mie)
- Automatically create a function specific attributes group for endpoint
drivers to avoid reference counting issues (Damien Le Moal)
- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)
- Reinitialize EPF test DMA transfer completion before submitting it to
avoid losing the completion notification (Damien Le Moal)
- Fix EPF test DMA transfer completion detection (Damien Le Moal)
- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
(Damien Le Moal)
- Simplify EPF test read/write/copy functions (Damien Le Moal)
- Simplify EPF test "raise IRQ" interface (Damien Le Moal)
- Simplify EPF test IRQ command execution (Damien Le Moal)
- Improve EPF test command/status register handling (Damien Le Moal)
- Free IRQs before removing device (Damien Le Moal)
- Reinitialize IRQ completions for every test (Damien Le Moal)
- Don't write status in IRQ handler to avoid race (Damien Le Moal)
- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)
- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
vector parameters (Manivannan Sadhasivam)
- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)
- Return -EALREADY if EPC has already been started/stopped (Manivannan
Sadhasivam)
- Add linkdown notifier support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
Sadhasivam)
- Add Layerscape PME interrupt handling to manage link-up notification
(Frank Li)
* pci/controller/endpoint:
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
PCI: endpoint: Add PCI Endpoint function driver for MHI bus
PCI: qcom-ep: Add support for BME notification
PCI: qcom-ep: Add support for Link down notification
PCI: endpoint: Add BME notifier support
PCI: endpoint: Add linkdown notifier support
PCI: endpoint: Return error if EPC is started/stopped multiple times
PCI: endpoint: Pass EPF device ID to the probe function
PCI: endpoint: Add missing documentation about the MSI/MSI-X range
PCI: endpoint: Improve pci_epf_type_add_cfs()
PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
misc: pci_endpoint_test: Do not write status in IRQ handler
misc: pci_endpoint_test: Re-init completion for every test
misc: pci_endpoint_test: Free IRQs before removing the device
PCI: epf-test: Simplify transfers result print
PCI: epf-test: Simplify DMA support checks
PCI: epf-test: Cleanup request result handling
PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
PCI: epf-test: Improve handling of command and status registers
PCI: epf-test: Simplify IRQ test commands execution
PCI: epf-test: Simplify pci_epf_test_raise_irq()
PCI: epf-test: Simplify read/write/copy test functions
PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
PCI: epf-test: Fix DMA transfer completion detection
PCI: epf-test: Fix DMA transfer completion initialization
PCI: endpoint: Move pci_epf_type_add_cfs() code
PCI: endpoint: Automatically create a function specific attributes group
PCI: endpoint: Fix a Kconfig prompt of vNTB driver
|
|
- Reset VMD config register between soft reboots (Nirmal Patel)
- Capture pci_reset_bus() return value instead of printing junk when it
fails (Xinghui Li)
* pci/controller/vmd:
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: vmd: Reset VMD config register between soft reboots
|
|
- Remove writes to unused registers (Rick Wertenbroek)
- Write endpoint Device ID using correct register (Rick Wertenbroek)
- Assert PCI Configuration Enable bit after probe so endpoint responds
instead of generating Request Retry Status messages (Rick Wertenbroek)
- Poll waiting for PHY PLLs to lock (Rick Wertenbroek)
- Update RK3399 example DT binding to be valid (Rick Wertenbroek)
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message (Rick Wertenbroek)
- Use multiple windows to avoid address translation conflicts (Rick
Wertenbroek)
- Use u32 (not u16) when accessing 32-bit registers (Rick Wertenbroek)
- Hide MSI-X Capability, since RK3399 can't generate MSI-X (Rick
Wertenbroek)
- Set endpoint controller required alignment to 256 (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip: Set address alignment for endpoint mode
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Fix window mapping and address translation for endpoint
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
dt-bindings: PCI: Update the RK3399 example to a valid one
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Remove writes to unused registers
|
|
- Remove unused static pcie_base and pcie_dev (Geert Uytterhoeven)
* pci/controller/rcar:
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: rcar-host: Remove unused static pcie_base and pcie_dev
|
|
- Disable register write access after init for IP v2.3.3, v2.9.0
(Manivannan Sadhasivam)
- Use DWC helpers for enabling/disabling writes to DBI registers
(Manivannan Sadhasivam)
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0 (Manivannan Sadhasivam)
- Reuse v2.3.2 post-init sequence for v2.4.0 (Manivannan Sadhasivam)
-
* pci/controller/qcom:
PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
PCI: qcom: Disable write access to read only registers for IP v2.9.0
PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
PCI: qcom: Disable write access to read only registers for IP v2.3.3
|
|
- Release clock resources on error paths (Junyan Ye)
* pci/pci/ftpci100:
PCI: ftpci100: Release the clock resources
|
|
- Wait for link to come up only if we've initiated link training (Ajay
Agarwal)
- Save and restore imx6 Root Port MSI control to work around hardware
defect (Richard Zhu)
* pci/controller/dwc:
PCI: imx6: Save and restore root port MSI control in suspend and resume
PCI: dwc: Wait for link up only if link is started
|
|
The ret variable in the vmd_enable_domain() function was used
uninitialized when printing a warning message upon failure of
the pci_reset_bus() function.
Thus, fix the issue by assigning ret with the value returned from
pci_reset_bus() before referencing it in the warning message.
This was detected by Smatch:
drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'.
[kwilczynski: drop the second patch from the series, add missing reported
by tag, commit log]
Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges")
Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com
Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks.
The iproc driver always returns 0, it's just a bit hidden. So make
iproc_pcie_remove() return void instead of always zero and convert the
platform driver to the alternative remove callback that returns void and
eventually replaces the int returning callback.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the dwc drivers from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
|
Frank Li
Yong-Xuan Wang
Dexuan Cui
Nirmal Patel
Mark Brown
Daire McNamara
Xiongfeng Wang
Bjorn Helgaas
Vidya Sagar
Johan Hovold
Rob Herring
Rick Wertenbroek
Krzysztof Wilczyński
Yang Li
Manivannan Sadhasivam
Sven Peter
Linus Torvalds
Xinghui Li
Uwe Kleine-König