aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/pci/pcie (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-04-24PM: sleep: core: Rename DPM_FLAG_NEVER_SKIPRafael J. Wysocki1-1/+1
Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which matches its purpose more closely. No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for PCI parts Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds9-176/+349
Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-02Merge branch 'pci/edr'Bjorn Helgaas8-173/+346
- Update error status after reset_link() so we don't report "recovery failed" when it in fact succeeded (Kuppuswamy Sathyanarayanan) - Move DPC data into struct pci_dev instead of allocating a separate struct dpc_dev (Bjorn Helgaas) - Remove AER/DPC service dependency to simplify error recovery (Kuppuswamy Sathyanarayanan) - Return error recovery status for future use by EDR, which needs to tell firmware whether recovery was successful (Kuppuswamy Sathyanarayanan) - Cache DPC capability info in core since it's needed by EDR as well as DPC driver (Kuppuswamy Sathyanarayanan) - Add pci_aer_raw_clear_status() to allow EDR recovery path to clear AER status even when OS doesn't own the AER capability (Kuppuswamy Sathyanarayanan) - Add Error Disconnect Recover (EDR) support, so firmware can use ACPI notification to tell the OS that devices have been disconnected, e.g., via DPC, and that OS should attempt recovery (Kuppuswamy Sathyanarayanan) - Rename AER error status clearing interfaces to be more consistent (Kuppuswamy Sathyanarayanan) * pci/edr: PCI/AER: Rationalize error status register clearing PCI/DPC: Add Error Disconnect Recover (EDR) support PCI/DPC: Expose dpc_process_error(), dpc_reset_link() for use by EDR PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error Status PCI/DPC: Cache DPC capabilities in pci_init_capabilities() PCI/ERR: Return status of pcie_do_recovery() PCI/ERR: Remove service dependency in pcie_do_recovery() PCI/DPC: Move DPC data into struct pci_dev PCI/ERR: Update error status after reset_link() PCI/ERR: Combine pci_channel_io_frozen cases
2020-03-28PCI/ASPM: Reduce severity of common clock config messageChris Packham1-1/+1
When the UEFI/BIOS or bootloader has not initialised a PCIe device we would get the following message: kern.warning: pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring "warning" and "broken" are slightly misleading. On an embedded system it is quite possible for the bootloader to avoid configuring PCIe devices if they are not needed. Downgrade the message to pci_info() and change "broken" to "inconsistent" since we fix up the inconsistency in the code immediately following the message (and emit an error if that fails). Link: https://lore.kernel.org/r/20200323035530.11569-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan3-6/+6
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Add Error Disconnect Recover (EDR) supportKuppuswamy Sathyanarayanan3-0/+250
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-28PCI/DPC: Expose dpc_process_error(), dpc_reset_link() for use by EDRKuppuswamy Sathyanarayanan1-3/+9
If firmware controls DPC, it is generally responsible for managing the DPC capability and events, and the OS should not access the DPC capability. However, if firmware controls DPC and both the OS and the platform support Error Disconnect Recover (EDR) notifications, the OS EDR notify handler is responsible for recovery, and the notify handler may read/write the DPC capability until it clears the DPC Trigger Status bit. See [1], sec 4.5.1, table 4-6. Expose some DPC error handling functions so they can be used by the EDR notify handler. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/e9000bb15b3a4293e81d98bb29ead7c84a6393c9.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error StatusKuppuswamy Sathyanarayanan1-4/+18
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the OS seems to be expected to clear AER status even if it doesn't have ownership of the AER capability. Unlike the DPC capability, where a DPC ECN [2] specifies a window when the OS is allowed to access DPC registers even if it doesn't have ownership, there is no clear model for AER. Add pci_aer_raw_clear_status() to clear the AER error status registers unconditionally. This is intended for use only by the EDR path (see [2]). [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: changelog] Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Cache DPC capabilities in pci_init_capabilities()Kuppuswamy Sathyanarayanan1-12/+21
Since Error Disconnect Recover needs to use DPC error handling routines even if the OS doesn't have control of DPC, move the initalization and caching of DPC capabilities from the DPC driver to pci_init_capabilities(). Link: https://lore.kernel.org/r/5888380657c8b9551675b5dbd48e370e4fd2703d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Return status of pcie_do_recovery()Kuppuswamy Sathyanarayanan1-4/+6
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS supports Error Disconnect Recover (EDR), it must invalidate the software state associated with child devices of the port without attempting to access the child device hardware. In addition, if the OS supports DPC, it must attempt to recover the child devices if the port implements the DPC Capability. If the OS continues operation, the OS must inform the firmware of the status of the recovery operation via the _OST method. Return the result of pcie_do_recovery() so we can report it to firmware via _OST. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Remove service dependency in pcie_do_recovery()Kuppuswamy Sathyanarayanan5-80/+13
Previously we passed the PCIe service type parameter to pcie_do_recovery(), where reset_link() looked up the underlying pci_port_service_driver and its .reset_link() function pointer. Instead of using this roundabout way, we can just pass the driver-specific .reset_link() callback function when calling pcie_do_recovery() function. This allows us to call pcie_do_recovery() from code that is not a PCIe port service driver, e.g., Error Disconnect Recover (EDR) support. Remove pcie_port_find_service() and pcie_port_service_driver.reset_link since they are now unused. Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Move DPC data into struct pci_devBjorn Helgaas1-72/+31
We only need 25 bits of data for DPC, so I don't think it's worth the complexity of allocating and keeping track of the struct dpc_dev separately from the pci_dev. Move that data into the struct pci_dev. Link: https://lore.kernel.org/r/98323eaa18080adbe5bb30846862f09f8722d4b3.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Update error status after reset_link()Kuppuswamy Sathyanarayanan1-1/+2
Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses reset_link() to recover from fatal errors. But during fatal error recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using reset_link()) pcie_do_recovery() will report the recovery result as failure. Update the status of error after reset_link(). You can reproduce this issue by triggering a SW DPC using "DPC Software Trigger" bit in "DPC Control Register". You should see recovery failed dmesg log as below: pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000 pcieport 0000:00:16.0: DPC: software trigger detected pci 0000:04:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:16.0: AER: device recovery failed Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com [bhelgaas: split pci_channel_io_frozen simplification to separate patch] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> Cc: Ashok Raj <ashok.raj@intel.com>
2020-03-28PCI/ERR: Combine pci_channel_io_frozen casesKuppuswamy Sathyanarayanan1-6/+5
pcie_do_recovery() had two "if (state == pci_channel_io_frozen)" cases right after each other. Combine them to make this easier to read. No functional change intended. Link: https://lore.kernel.org/r/20200317170654.GA23125@infradead.org [bhelgaas: split from https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-18PCI/ASPM: Clear the correct bits when enabling L1 substatesYicong Yang1-2/+2
In pcie_config_aspm_l1ss(), we cleared the wrong bits when enabling ASPM L1 Substates. Instead of the L1.x enable bits (PCI_L1SS_CTL1_L1SS_MASK, 0xf), we cleared the Link Activation Interrupt Enable bit (PCI_L1SS_CAP_L1_PM_SS, 0x10). Clear the L1.x enable bits before writing the new L1.x configuration. [bhelgaas: changelog] Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings") Link: https://lore.kernel.org/r/1584093227-1292-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.11+
2020-03-08PCI/AER: Fix the broken interrupt injectionThomas Gleixner2-4/+3
The AER error injection mechanism just blindly abuses generic_handle_irq() which is really not meant for consumption by random drivers. The include of linux/irq.h should have been a red flag in the first place. Driver code, unless implementing interrupt chips or low level hypervisor functionality has absolutely no business with that. Invoking generic_handle_irq() from non interrupt handling context can have nasty side effects at least on x86 due to the hardware trainwreck which makes interrupt affinity changes a fragile beast. Sathyanarayanan triggered a NULL pointer dereference in the low level APIC code that way. While the particular pointer could be checked this would only paper over the issue because there are other ways to trigger warnings or silently corrupt state. Invoke the new irq_inject_interrupt() mechanism, which has the necessary sanity checks in place and injects the interrupt via the irq_retrigger() mechanism, which is at least halfways safe vs. the fragile x86 affinity change mechanics. It's safe on x86 as it does not corrupt state, but it still can cause a premature completion of an interrupt affinity change causing the interrupt line to become stale. Very unlikely, but possible. For regular operations this is a non issue as AER error injection is meant for debugging and testing and not for usage on production systems. People using this should better know what they are doing. Fixes: 390e2db82480 ("PCI/AER: Abstract AER interrupt handling") Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: https://lkml.kernel.org/r/20200306130624.098374457@linutronix.de
2020-01-23PCI/AER: Initialize aer_fifoDongdong Liu1-0/+1
Previously we did not call INIT_KFIFO() for aer_fifo. This leads to kfifo_put() sometimes returning 0 (queue full) when in fact it is not. It is easy to reproduce the problem by using aer-inject: $ aer-inject -s :82:00.0 multiple-corr-nonfatal The content of the multiple-corr-nonfatal file is as below: AER COR RCVR HL 0 1 2 3 AER UNCOR POISON_TLP HL 4 5 6 7 Fixes: 27c1ce8bbed7 ("PCI/AER: Use kfifo for tracking events instead of reimplementing it") Link: https://lore.kernel.org/r/1579767991-103898-1-git-send-email-liudongdong3@huawei.com Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-23PCI/AER: Factor message prefixes with dev_fmt()Bjorn Helgaas1-3/+5
Define dev_fmt() with the common prefix of log messages so we don't have to repeat it in every printk. No functional change intended. Link: https://lore.kernel.org/r/20191213225709.GA213811@google.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-23PCI/AER: Log which device prevents error recoveryYicong Yang1-2/+4
PCI error recovery will fail if any device under the Root Port doesn't have an error_detected callback. Currently only the failure result is printed, which is not enough to identify the driver that lacks the callback. Log a message to identify the device with no error_detected callback. [bhelgaas: tweak log message] Link: https://lore.kernel.org/r/1576237474-32021-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas2-4/+1
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-28Merge branch 'pci/aspm'Bjorn Helgaas2-98/+154
- Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) * pci/aspm: PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI/ASPM: Add pcie_aspm_get_link() PCI/ASPM: Allow re-enabling Clock PM PCI/ASPM: Add L1 PM substate support to pci_disable_link_state() PCI/ASPM: Remove pcie_aspm_enabled() unnecessary locking
2019-11-21PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related codeHeiner Kallweit2-112/+0
Previously, CONFIG_PCIEASPM_DEBUG enabled "link_state" and "clk_ctl" sysfs files that controlled ASPM. We believe these files were rarely if ever used. We recently added sysfs ASPM controls that are always present, so the debug code is no longer needed. Removing this debug code has been discussed for quite some time, see e.g. [0]. Remove PCIEASPM_DEBUG and the related code. [0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/ Link: https://lore.kernel.org/r/ec935d8e-c084-3938-f1d1-748617596b25@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI/ASPM: Add sysfs attributes for controlling ASPM link statesHeiner Kallweit1-0/+149
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM, Clock PM, and L1 PM Substates. The new attributes are: /sys/devices/pci*/.../link/clkpm /sys/devices/pci*/.../link/l0s_aspm /sys/devices/pci*/.../link/l1_aspm /sys/devices/pci*/.../link/l1_1_aspm /sys/devices/pci*/.../link/l1_2_aspm /sys/devices/pci*/.../link/l1_1_pcipm /sys/devices/pci*/.../link/l1_2_pcipm An attribute is only visible if both ends of the Link leading to the device support the state. Writing y/1/on to the file enables the state; n/0/off disables it. These attributes can be used to tune the power/performance tradeoff for individual devices. [bhelgaas: commit log, rename directory to "link"] Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI: Remove PCIe Kconfig dependencies on PCIBjorn Helgaas1-2/+0
drivers/pci/pcie/Kconfig is only sourced by drivers/pci/Kconfig, and only when PCI is defined, so there's no need to depend on PCI again. Remove the unnecessary dependencies. Link: https://lore.kernel.org/r/20191106222420.10216-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-11-21PCI/ASPM: Remove dependency on PCIEPORTBUSBjorn Helgaas1-1/+1
The ASPM support does not depend on the portdrv, so remove the Kconfig dependency. Link: https://lore.kernel.org/r/20191106222420.10216-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-11-21PCI/PTM: Remove dependency on PCIEPORTBUSBjorn Helgaas1-1/+0
The PTM support does not depend on the portdrv, so remove the Kconfig dependency. Link: https://lore.kernel.org/r/20191106222420.10216-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jonathan Yong <jonathan.yong@intel.com>
2019-11-21PCI/PTM: Remove spurious "d" from granularity messageBjorn Helgaas1-1/+1
The granularity message has an extra "d": pci 0000:02:00.0: PTM enabled, 4dns granularity Remove the "d" so the message is simply "PTM enabled, 4ns granularity". Fixes: 8b2ec318eece ("PCI: Add PTM clock granularity information") Link: https://lore.kernel.org/r/20191106222420.10216-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jonathan Yong <jonathan.yong@intel.com>
2019-10-25PCI/DPC: Add "pcie_ports=dpc-native" to allow DPC without AER controlOlof Johansson4-2/+17
Prior to eed85ff4c0da7 ("PCI/DPC: Enable DPC only if AER is available"), Linux handled DPC events regardless of whether firmware had granted it ownership of AER or DPC, e.g., via _OSC. PCIe r5.0, sec 6.2.10, recommends that the OS link control of DPC to control of AER, so after eed85ff4c0da7, Linux handles DPC events only if it has control of AER. On platforms that do not grant OS control of AER via _OSC, Linux DPC handling worked before eed85ff4c0da7 but not after. To make Linux DPC handling work on those platforms the same way they did before, add a "pcie_ports=dpc-native" kernel parameter that makes Linux handle DPC events regardless of whether it has control of AER. [bhelgaas: commit log, move pcie_ports_dpc_native to drivers/pci/] Link: https://lore.kernel.org/r/20191023192205.97024-1-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-18PCI/AER: Fix kernel-doc warningsAndy Shevchenko1-1/+3
Kernel-doc validator complains: aer.c:207: warning: Function parameter or member 'str' not described in 'pcie_ecrc_get_policy' aer.c:1209: warning: Function parameter or member 'irq' not described in 'aer_isr' aer.c:1209: warning: Function parameter or member 'context' not described in 'aer_isr' aer.c:1209: warning: Excess function parameter 'work' description in 'aer_isr' Fix the above accordingly. Link: https://lore.kernel.org/r/20190827151823.75312-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-10-18PCI/AER: Use for_each_set_bit() to simplify codeAndy Shevchenko1-11/+8
Simplify error counting code by using for_each_set_bit() library function. Link: https://lore.kernel.org/r/20190827151823.75312-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-10-18PCI/AER: Add PoisonTLPBlocked to Uncorrectable error countersRajat Jain1-1/+2
The elements in the aer_uncorrectable_error_string[] refer to the bit names in Uncorrectable Error Status Register. Add PoisonTLPBlocked, which was added in PCIe r3.1, sec 7.10.2. Link: https://lore.kernel.org/r/20190827222145.32642-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-18PCI/AER: Save AER Capability for suspend/resumePatel, Mayurkumar1-2/+60
Previously we did not save and restore the AER configuration on suspend/resume, so the configuration may be lost after resume. Save the AER configuration during suspend and restore it during resume. [bhelgaas: commit log] Link: https://lore.kernel.org/r/92EBB4272BF81E4089A7126EC1E7B28492C3B007@IRSMSX101.ger.corp.intel.com Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-15PCI/ASPM: Add pcie_aspm_get_link()Heiner Kallweit1-12/+18
Factor out getting the link associated with a pci_dev and use this helper where appropriate. In addition this helper will be used in a subsequent patch of this series. Link: https://lore.kernel.org/r/19d33770-29de-a9af-4d85-f2b30269d383@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Allow re-enabling Clock PMHeiner Kallweit1-7/+11
Previously Clock PM could not be re-enabled after being disabled by pci_disable_link_state() because clkpm_capable was reset. Change this by adding a clkpm_disable field similar to aspm_disable. Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Add L1 PM substate support to pci_disable_link_state()Heiner Kallweit1-1/+10
Add support for disabling states L1.1 and L1.2 to pci_disable_link_state(). Allow separate control of ASPM and PCI PM L1 substates. Link: https://lore.kernel.org/r/d81f8036-c236-6463-48e7-ebcdcda85bba@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Remove pcie_aspm_enabled() unnecessary lockingBjorn Helgaas1-6/+6
The lifetime of the link_state structure (bridge->link_state) is not the same as the lifetime of "bridge" itself. The link_state is allocated by pcie_aspm_init_link_state() after children of the bridge have been enumerated, and it is deallocated by pcie_aspm_exit_link_state() after all children of the bridge (but not the bridge itself) have been removed. Previously pcie_aspm_enabled() acquired aspm_lock to ensure that link_state was not deallocated while we're looking at it. But the fact that the caller of pcie_aspm_enabled() holds a reference to @pdev means there's always at least one child of the bridge, which means link_state can't be deallocated. Remove the unnecessary locking in pcie_aspm_enabled(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-23Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-6/+5
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas2-5/+5
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg2-5/+5
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski1-1/+0
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-12PCI/ASPM: Add pcie_aspm_enabled()Rafael J. Wysocki1-0/+20
Add a function checking whether or not PCIe ASPM has been enabled for a given device. It will be used by the NVMe driver to decide how to handle the device during system suspend. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-07Revert "PCI: Add missing link delays required by the PCIe spec"Mika Westerberg1-66/+0
Commit c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/2857501d-c167-547d-c57d-d5d24ea1f1dc@molgen.mpg.de/ Reported-by: Matthias Andree <matthias.andree@gmx.de> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-15Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-9/+11
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas1-1/+1
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-06-21PCI: let pci_disable_link_state propagate errorsHeiner Kallweit1-9/+11
Drivers may rely on pci_disable_link_state() having disabled certain ASPM link states. If OS can't control ASPM then pci_disable_link_state() turns into a no-op w/o informing the caller. The driver therefore may falsely assume the respective ASPM link states are disabled. Let pci_disable_link_state() propagate errors to the caller, enabling the caller to react accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18PCI: Add missing link delays required by the PCIe specMika Westerberg1-0/+66
Currently Linux does not follow PCIe spec regarding the required delays after reset. A concrete example is a Thunderbolt add-in-card that consists of a PCIe switch and two PCIe endpoints: +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller +-01.0-[04-36]-- DS hotplug port +-02.0-[37]----00.0 xHCI controller \-04.0-[38-6b]-- DS hotplug port The root port (1b.0) and the PCIe switch downstream ports are all PCIe gen3 so they support 8GT/s link speeds. We wait for the PCIe hierarchy to enter D3cold (runtime): pcieport 0000:00:1b.0: power state changed by ACPI to D3cold When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the PCIe switch is put to reset and its power is re-applied. This means that we must follow the rules in PCIe 4.0 section 6.6.1. For the PCIe gen3 ports we are dealing with here, the following applies: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Translating this into the above topology we would need to do this (DLLLA stands for Data Link Layer Link Active): pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0 pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0 pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0 I've instrumented the kernel with additional logging so we can see the actual delays the kernel performs: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms pcieport 0000:00:1b.0: waking up bus pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:00:1b.0: PME# disabled pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:01:00.0: PME# disabled pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:00.0: PME# disabled pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:01.0: PME# disabled pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: PME# disabled pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:04.0: PME# disabled pcieport 0000:02:01.0: PME# enabled pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms pcieport 0000:02:04.0: PME# enabled pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) ... thunderbolt 0000:03:00.0: PME# disabled xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... xhci_hcd 0000:37:00.0: PME# disabled For the switch upstream port (01:00.0) we wait for 100ms but not taking into account the DLLLA requirement. We then wait 10ms for D3hot -> D0 transition of the root port and the two downstream hotplug ports. This means that we deviate from what the spec requires. Performing the same check for system sleep (s2idle) transitions we can see following when resuming from s2idle: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0) pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001) pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702) pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001) pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00) pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400) pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151) pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00) pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161) pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402) pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802) pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302) pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) This is even worse. None of the mandatory delays are performed. If this would be S3 instead of s2idle then according to PCI FW spec 3.2 section 4.6.8. there is a specific _DSM that allows the OS to skip the delays but this platform does not provide the _DSM and does not go to S3 anyway so no firmware is involved that could already handle these delays. In this particular Intel Coffee Lake platform these delays are not actually needed because there is an additional delay as part of the ACPI power resource that is used to turn on power to the hierarchy but since that additional delay is not required by any of standards (PCIe, ACPI) it is not present in the Intel Ice Lake, for example where missing the mandatory delays causes pciehp to start tearing down the stack too early (links are not yet trained). For this reason, change the PCIe portdrv PM resume hooks so that they perform the mandatory delays before the downstream component gets resumed. We perform the delays before port services are resumed because otherwise pciehp might find that the link is not up (even if it is just training) and tears-down the hierarchy. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-14Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds6-63/+95
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-13Merge branch 'pci/printk-portdrv'Bjorn Helgaas4-47/+50
- Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
2019-05-13Merge branch 'pci/portdrv'Bjorn Helgaas1-0/+14
- Disable Link Management interrupt during suspend to prevent immediate wakeup (Mika Westerberg) * pci/portdrv: PCI/LINK: Disable bandwidth notification interrupt during suspend
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.