| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The goal is to avoid duplicating the core data structures when
introducing the new lynx-10g driver.
We move the following to phy-fsl-lynx-core:
- struct lynx_28g_pll -> struct lynx_pll. This has some
hardware-specific register fields which need to become hardware
agnostic (the PLL register layout is different for Lynx 10G), So:
- PLLnRSTCTL_DIS(pll->rstctl) becomes !pll->enabled
- PLLnRSTCTL_LOCK(pll->rstctl) becomes pll->locked
- FIELD_GET(PLLnCR1_FRATE_SEL, pll->cr1) becomes pll->frate_sel
- FIELD_GET(PLLnCR0_REFCLK_SEL, pll->cr0) becomes pll->refclk_sel
- struct lynx_28g_lane -> struct lynx_lane
- struct lynx_28g_priv -> struct lynx_priv
- field lane[LYNX_28G_NUM_LANE] has to be dynamically allocated. Not
all Lynx 10G SerDes blocks have 8 lanes.
- LYNX_28G_NUM_PLL -> LYNX_NUM_PLL. This is an architectural constant
which is the same for Lynx 10G as well.
To avoid major noise in the lynx-28g driver, we keep compatibility shims
(for now) where the old lynx_28g names are preserved, but translate to
the common data structures.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260610151952.2141019-5-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Do some preparation work for the introduction of the lynx-10g driver,
which will share a common backbone with the 28G Lynx SerDes.
This is just trivial stuff which can be moved without any surgery, and
is easy to follow but otherwise pollutes more serious changes.
The lane modes themselves are exported to a public header, because on
the 10G Lynx, the hardware requires implementing a procedure called
"RCW override". This requires coordination with drivers/soc/fsl/guts.c
to tell it that a SerDes lane needs to be switched to a different
protocol (enum lynx_lane_mode).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260610151952.2141019-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It is possible to bind the lynx-28g driver to an arbitrary device with
an OF node, using the driver_override mechanism that is available for
the platform bus, and trigger a crash this way:
$ echo 1ea0000.serdes > /sys/bus/platform/drivers/lynx-10g/unbind
$ echo lynx-28g > /sys/bus/platform/devices/1ea0000.serdes/driver_override
$ echo 1ea0000.serdes > /sys/bus/platform/drivers/lynx-28g/bind
Internal error: Oops: 0000000096000004 [#1] SMP
Hardware name: LS1028A RDB Board (DT)
pc : lynx_probe+0x118/0x4fc
lr : lynx_probe+0x110/0x4fc
Call trace:
lynx_probe+0x118/0x4fc (P)
lynx_28g_probe+0x54/0x7c
platform_probe+0x68/0xa4
really_probe+0x14c/0x2ec
__driver_probe_device+0xc8/0x170
device_driver_attach+0x58/0xa8
bind_store+0xd8/0x118
drv_attr_store+0x24/0x38
The crash is caused by the fact that of_device_get_match_data() returns
NULL (the bound device has a different compatible string) and this is
not checked.
There was a previous attempt to avoid this in commit c9d80e861034 ("phy:
lynx-28g: require an OF node to probe"), but the mechanism was not fully
understood and it only covered the case where the driver was bound to a
device with no OF node.
The issue was found during Sashiko review. Elevated privilege is
required to override the driver for a device, so the real life impact of
the issue should not be very high.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260610151952.2141019-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Sashiko points out that _of_phy_get() does not support a NULL returned
output from phy_provider->of_xlate(), just a valid pointer or a
pointer-encoded error.
When lynx_28g_probe() -> for_each_available_child_of_node() skips
over lanes which have OF nodes with status = "disabled", the
priv->lane[idx].phy pointer will remain NULL.
This NULL pointer may be propagated to lynx_28g_xlate() if the device
tree contains a phandle to the disabled lane AND fw_devlink did not
block probing for the consumer. In that case, the PHY core will crash
when trying to dereference the NULL phy pointer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260610151952.2141019-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add QMP PCIe PHY support for the Eliza SoC. Introduce a new Gen3x1 PHY
configuration with Eliza-specific initialization tables, and reuse the
existing sm8550 Gen3x2 configuration for the Gen3x2 PHY instance.
Also add the missing QPHY_PCIE_V6_PCS_PCIE_INT_AUX_CLK_CONFIG1 register
definition to the PCIe V6 PCS header.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260608-eliza-v3-3-9bdeb7434b28@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519151957.1593214-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260507131439.264906-1-marco.crivellari@suse.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a generic PHY driver for the TI DS125DF111 Multi-Protocol
Dual-Channel Retimer. The driver currently supports only 10G and 1G link
speeds but it can easily extended to also cover other usecases.
Since the available datasheet (https://www.ti.com/lit/gpn/DS125DF111)
does not name the registers, the name for the macros were determined by
their usage pattern.
A PHY device is created for each of the two channels present on the
retimer. This allows for independent configuration of the two channels.
This capability is especially important on retimers which have more than
2 channels that can be, depending on the board design, connected in
multiple different ways to the SerDes lanes.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260518142026.3098496-4-ioana.ciornei@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Sort alphabetically the entries in the Kconfig and Makefile files.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260518142026.3098496-3-ioana.ciornei@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PCIe SSC configuration for the RK3588 and RK3576 SoCs required
additional tuning which is missing. When adding these same SSC
configurations for both of these two SoCs, as well as upcoming
platforms, it's obvious the SSC setup code was largely duplicated
across the platform-specific configuration functions. This becomes
harder to maintain as more platforms are added.
So extract the common SSC logic into a shared helper function,
rk_combphy_common_cfg_ssc(). This cleans up the per-platform drivers
and centralizes the standard configuration as possible.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1777251433-110466-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but
the boundary check uses "> 4" instead of ">= 4", allowing index 4 to
cause an out-of-bounds access.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 81791c45c8e0 ("phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support")
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260227-master-v1-1-8d91b9407fdb@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Keep the USB pipe clock working when the phy is in DP-only mode, because
the dwc controller still needs it for USB 2.0 over the same Type-C port.
Tested with the BenQ RD280UA monitor which has a downstream-facing port
for data passthrough that's manually switchable between USB 2 and 3,
corresponding to 4-lane and 2-lane DP respectively.
Note: the suspend/resume callbacks were already gating the enable/disable
of this clock only on init_count and not usb_init_count!
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260304190827.176988-1-val@packett.cool
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of kzalloc and kcalloc, we can use a flex array to reduce to a
single allocation.
Also added __counted_by() for extra possible analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20260304043420.14151-1-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Simplify allocation by removing kmalloc_array and just doing kzalloc.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260315214930.4621-1-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
atcphy_probe_switch() and atcphy_probe_mux() discard the pointers
returned by typec_switch_register() and typec_mux_register(). The
platform driver has no .remove callback, so when the driver unbinds
(e.g. via sysfs unbind) neither typec_switch_unregister() nor
typec_mux_unregister() is called. The framework reference taken in
typec_switch_register() (device_initialize() + device_add() in
drivers/usb/typec/mux.c) is therefore never dropped and the
typec_switch_dev / typec_mux_dev objects stay live forever, with
their sysfs entries under the typec_mux class also left behind. A
subsequent rebind cannot recreate them with the same fwnode-derived
name.
Save the registered handles and unregister them through
devm_add_action_or_reset() so framework registration is torn down
in step with the driver's other devm-managed state. While here,
drop struct apple_atcphy::sw and ::mux: they were declared with the
consumer-side types (typec_switch *, typec_mux *) instead of the
provider-side types and were never assigned.
Scope of the fix
================
This patch fixes the registration leak only. It does not close the
use-after-free window that arises when a consumer that obtained a
reference via fwnode_typec_switch_get() / fwnode_typec_mux_get()
outlives the provider unbind: such consumers keep the underlying
typec_switch_dev / typec_mux_dev alive past device_unregister(),
and a later typec_switch_set() / typec_mux_set() still invokes the
registered atcphy_sw_set() / atcphy_mux_set(), which dereferences
the freed apple_atcphy through typec_{switch,mux}_get_drvdata().
On Apple Silicon the relevant consumers are the typec port and the
cd321x controller registered by drivers/usb/typec/tipd/core.c.
Cable plug / orientation events and alt-mode transitions trigger
the .set callbacks via:
tps6598x_interrupt() drivers/usb/typec/tipd/core.c
tps6598x_handle_plug_event()
tps6598x_connect()/_disconnect()
typec_set_orientation() drivers/usb/typec/class.c
typec_switch_set(port->sw) drivers/usb/typec/mux.c
atcphy_sw_set() drivers/phy/apple/atc.c
cd321x_update_work() drivers/usb/typec/tipd/core.c
cd321x_typec_update_mode()
typec_mux_set(cd321x->mux) drivers/usb/typec/mux.c
atcphy_mux_set() drivers/phy/apple/atc.c
Closing that window requires framework support for invalidating
consumer-held references on provider unbind. The same
consumer-survives-provider pattern has been discussed for the PHY
framework [1] and is out of scope here.
[1] https://lore.kernel.org/linux-phy/aZejMSJ9qqRWb2pX@google.com/
Fixes: 8e98ca1e74db ("phy: apple: Add Apple Type-C PHY")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com
Link: https://patch.msgid.link/20260508201958.30060-1-devnexen@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce support for EcoNet PCIe PHY controllers found in EN751221
and EN7528 SoCs, these SoCs are not identical but are similar, each
having one Gen1 port, and one Gen1/Gen2 port.
Co-developed-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
[cjd@cjdns.fr: add EN751221 support and refactor for clarity]
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20260425173642.406089-3-cjd@cjdns.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The RK3528 has a single USB2PHY with a otg and host port.
Add support for the RK3528 variant of USB2PHY.
PHY tuning for RK3528:
- Turn off differential receiver in suspend mode to save power
consumption.
- Set HS eye-height to 400mV instead of default 450mV.
- Choose the Tx fs/ls data as linestate from TX driver for otg port
which uses dwc3 controller to improve fs/ls devices compatibility with
long cables.
Undocumented magic-values are based on the linux-stan-6.1-rkr5 tag of
the vendor-kernel.
Signed-off-by: Jianwei Zheng <jianwei.zheng@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-6-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The 480m clk is controlled using regs in the PHY address space and not
in the USB GRF address space on e.g. RK3528 and RK3506.
Add a clkout_ctl_phy usb2phy_reg to handle enable/disable of the 480m
clk on these SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-5-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The logic to decide if usbgrf or grf should be used is more complex than
it needs to be. For RK3568, RV1108 and soon RK3528 we can assign the
rockchip,usbgrf regmap directly to grf instead of doing a usbgrf and grf
dance.
Simplify the code to only use the grf regmap and handle the logic of
what regmap should be used in driver probe instead.
The only expected change from this is that RK3528 can be supported
because of an addition of a of_property_present() check.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-3-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.
Reviewed-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The code like
int foo = X;
...
if (bar)
foo = Y;
is prone to subtle mistakes and hence harder to maintain as the foo value
may be changed inadvertently while code in '...' grown in lines. On top
it's harder to navigate to understand the possible values of foo when branch
is not taken (requires to look somewhere else in the code, far from the piece
at hand).
Besides that in case of taken branch the foo will be rewritten, which is
not a problem per se, just an unneeded operation.
Decouple assignment and definition to use if-else to address the inconveniences
described above.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of checking for the specific error codes (that can be considered
a layering violation to some extent) check for the property existence first
and then either parse it, or apply a default value.
With that, return an error when parsing of the existing property fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the generic firmware node interface for retrieving
device match data instead of the OF-specific one.
While at it, drop unneeded argument to devm_phy_create() which
extracts device node from the given device by default.
Reviewed-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override()
so platform drivers that rely on the existence of a device's driver
data need to verify its presence.
Accordingly, add requisite match and driver data checks against NULL
to the driver where they are missing.
Fixes: a4a86d273ff1 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220336.369628-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for 25GBASE-R in the Lynx 28G SerDes PHY driver. This will
be used by the dpaa2-mac consumer on LX2160A with:
- phy_validate(phy, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_25GBASER) to
detect support.
- phy_set_mode_ext(phy, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_25GBASER)
to reconfigure the lane for this protocol.
The intended use case for dynamic protocol switching to 25GBase-R is
with SFP28 modules, and protocol switching is triggered by the SFP
module insertion. There also exists a 25GBase-KR use case, where the
protocol switching is covered by IEEE 802.3 clause 73 auto-negotiation.
However, that is not handled here; it merely needs the support added
here as basic ground work.
The lane frequency for 25GbE is sourced from a clock net frequency of
12.890625 GHz, as produced by PLLF or PLLS, further multiplied by the
lane by 2. The clock net frequencies produced by the PLLs are treated as
read-only by the driver, so the absence of a PLL provisioned for the
right clock net frequency implies absence of 25GbE support, even though
a lane might have the appropriate protocol converter for it.
In terms of implementation, the change consists of:
- determining at probe time if any PLL was preconfigured for the
required clock net frequency for 25GbE
- adding the default lane parameters for reconfiguring a lane to 25GbE
irrespective of the original protocol
- allowing this operating mode only on supported lanes, i.e. all lanes
of LX2162A SerDes #1, and LX2160A SerDes lanes 0-1, 4-7.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add driver support for probing on the new, per-instance and per-SoC
bindings, which provide the main benefit that they allow rejecting
unsupported protocols per lane (10GbE on SerDes 2 lanes 0-5), but they
also allow avoiding the creation of PHYs for lanes that don't exist
(LX2162A lanes 0-3).
For old device trees with just "fsl,lynx-28g", the only things that
change are:
- a probe time warning/encouragement to update the device tree. This is
warranted by the fact that using "fsl,lynx-28g" may already provide
incorrect behaviour (undetected absent 10GbE support on LX2160A
SerDes 2 lanes 0-5). But we retain bug compatibility nonetheless.
- the feature set is frozen in time (e.g. no 25GbE). Since we cannot
guarantee that this protocol will work on a lane, just err on the safe
side and don't offer it (and require a device tree update to get it).
In terms of code, the lynx_28g_supports_lane_mode() function prototype
changes. It was a SerDes-global function and now becomes per lane, to
reflect the specific capabilities each instance may have. The
implementation goes through priv->info->lane_supports_mode().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-5-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver will gain support for variants in an upcoming change, and
will use of_device_get_match_data() to deduce the running variant from
the compatible string.
Currently, the driver expects the schema at phy/fsl,lynx-28g.yaml, and
OF-based consumers, but doesn't enforce this. And it is possible for
user space to force-bind the driver to a device without OF node using
the driver_override sysfs.
To avoid future surprise crashes for an unsupported configuration,
explicitly test for the presence of an OF node and fail probing if
found.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20260511150023.1903577-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the FIELD_MODIFY() helper instead of open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/a52020ba597e2e213b161eee21239f10e6057d9d.1772705690.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This driver uses multiple regmaps, which will causes name conflicts
in debugfs like:
debugfs: '5f1a0000.phy' already exists in 'regmap'
Fix this by using a dedicated regmap config for each resource, each
having a dedicated regmap name.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260211144949.1128122-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use flex array to simplify allocation.
Allows using __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260306222457.8400-3-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There's nothing special here to prevent compilation on non ARM hosts.
Matches every other st phy driver.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20260306222457.8400-2-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
EyeQ5 embeds a system-controller called OLB. It features many unrelated
registers, and some of those are registers used to configure the
integration of the RGMII/SGMII Cadence PHY used by MACB/GEM instances.
Wrap in a neat generic PHY provider, exposing two PHYs with standard
phy_init() / phy_set_mode() / phy_power_on() operations.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260309-macb-phy-v9-1-5afd87d9db43@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix a malformed MODULE_AUTHOR macro in the RZ/G3E USB3.0 PHY driver where
the author's name and opening angle bracket were missing, leaving only the
email address with a stray closing >. Correct it to the standard Name
<email> format.
Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/abp4KprlYyU+jMPu@duo.ucw.cz/
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260319063211.5056-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When clk_enable() fails, the clock was never enabled. Calling
clk_disable() in this error path is incorrect.
Remove the spurious clk_disable() call from the error handling
in spacemit_usb2phy_init().
Fixes: fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Ze Huang <huang.ze@linux.dev>
Link: https://patch.msgid.link/20260326-k1-usb3-v1-1-0c2b6adf5185@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On Layerscape, some Lynx SerDes consumers go through the PHY framework
(we call these 'managed' for the sake of this discussion; they are some
Ethernet lanes), and some consumers don't go through the PHY framework
(we call these 'unmanaged'; they are some unconverted Ethernet lanes,
plus all SATA and PCIe controllers).
A lane is initially unmanaged, and becomes managed when phy_init() is
called on it. Similarly, it becomes unmanaged again when phy_exit() is
called.
Managed lanes are supposed to have power management through
phy_power_on() and phy_power_off().
The lynx-28g SerDes driver, when it probes, probes on all lanes, but
needs to be careful to keep the unmanaged lanes powered on, because
those might be in use by consumers unaware that they need to call
phy_init() and phy_power_on(). This also applies after phy_exit() is
called - no guarantee is made about how the port may be used
afterwards - may be DPDK, may be something else which is unaware of
the PHY framework.
Given this state table:
State | Consumer calls phy_exit()? | Provider implements phy_exit()?
-------+----------------------------+--------------------------------
(a) | no | no
(b) | no | yes
(c) | yes | no
(d) | yes | yes
we are currently in state (a). This has the problem that when the
consumer fails to probe with -EPROBE_DEFER or is otherwise unbound,
the phy->init_count remains elevated and the lane never returns to the
unmanaged state (temporarily or not) as it should. Furthermore, the
second and subsequent phy_init() consumer calls are never passed on to
the provider driver.
We solve the above problem by implementing phy_exit() in the consumer,
and that moves us to state (c). But this creates the problem that a
balanced set of phy_init() and phy_exit() calls from the consumer will
effectively result in multiple lynx_28g_init() calls as seen by the
SerDes and nothing else - as the optional phy_ops :: exit() is not
implemented. But that actually doesn't work - the 28G Lynx SerDes can't
power down a lane which is already powered down; that call sequence
would time out and fail.
So actually we want to be in state (d), where both the provider and the
consumer implement phy_exit(). But we can only do that safely through
intermediary state (b), where the provider implements it first. This
effectively behaves just like (a), except it offers a safe migration
path for the consumer to call phy_exit() as mandated by the Generic PHY
API.
Extra development notes: ignoring the lynx_28g_power_on() error in
lynx_28g_exit() is a deliberate decision. The consumer can't deal with a
teardown path that is not error-free. Ignoring the error is not silent:
lynx_28g_power_on() -> lynx_28g_lane_reset() will print on failure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260321011451.1557091-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current procedure for power_off() and power_on() is the same as the
one used for major lane reconfiguration, aka halting. But this is
incorrect.
One would expect that a powered off lane causes the CDR (clock and data
recovery) loop of the link partner to lose lock onto its RX stream
(which suggests there are no longer any bit transitions => the channel
is inactive). However, it can be observed that this does not take place
(the CDR lock is still there), which means that a halted lane is not
powered off.
Implement the procedure mentioned in the block guide for powering down
a lane, and then back on. This means:
- lynx_28g_power_off() currently emits a HLT_REQ and waits for it to
clear. Rename it to lynx_28g_lane_halt() and keep using it for
lynx_28g_set_mode().
- lynx_28g_power_on() currently emits a RST_REQ and waits for it to
clear. This is the reset procedure - rename it to
lynx_28g_lane_reset(), and keep using it for lynx_28g_set_mode().
The "real" lynx_28g_power_off() should emit a STP_REQ and wait for it to
clear. And the "real" lynx_28g_power_on() should clear the DIS bit and
then perform a lane reset. Hook these methods to the phy_ops ::
power_off() and power_on() instead.
As opposed to lynx_28g_power_off() which is also directly hooked to the
PHY API, lynx_28g_lane_halt() isn't; just to lynx_28g_set_mode(), and
the call is being made in a state where we haven't yet made any change
to the lane. So it does make some limited amount of sense to code this
up such that if it fails, we make an attempt to reset the lane anyway
and let the consumer know that phy_set_mode_ext() failed.
Sort the field definitions in LNaTRSTCTL and LNaRRSTCTL in descending
order, and add new definitions for STP_REQ and DIS, previously unused.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260321011451.1557091-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are various circumstances in which a lane halt, or a lane reset,
will fail to complete. If this happens, it will hang the kernel, which
only implements a busy loop with no timeout.
The circumstances in which this will happen are all bugs in nature:
- if we try to power off a powered off lane
- if we try to power off a lane that uses a PLL locked onto the wrong
refclk frequency (wrong RCW, but SoC boots anyway)
Actually, unbounded loops in the kernel are a bad practice, so let's use
read_poll_timeout() with a custom function that reads both LNaTRSTCTL
(lane transmit control register) and LNaRRSTCTL (lane receive control
register) and returns true when the request is done in both directions.
The HLT_REQ bit has to clear, whereas the RST_DONE bit has to get set.
Any time such an error happens, it is catastrophic and there is no point
in trying to propagate it to our callers:
- if lynx_28g_set_mode() -> lynx_28g_power_on() times out, we have
already reconfigured the lane, but returning an error would tell the
caller that we didn't
- if lynx_28g_power_off() times out, again not much for the consumer to
do to help get out of this situation - the phy_power_off() call is
probably made from a context that the consumer can't cancel, or it is
making it to return to a known state from a previous failure.
So just print an error if timeouts happen and let the driver control
flow continue. The entire point is just to not let the kernel freeze.
Suggested-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/lkml/d0c8bbf8-a0c5-469f-a148-de2235948c0f@solid-run.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260321011451.1557091-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A repeater is not required for the PHY to function. On systems with
multiple PHY instances connected to a multi-port controller, some PHYs
may be unconnected. All PHYs must still probe successfully even without
attached repeaters, otherwise the controller probe fails.
So make it optional.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
[abel.vesa@oss.qualcomm.com: commit re-worded to reflect actual reason]
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260302-phy-qcom-m31-eusb2-make-repeater-optional-v2-1-dbf714c72056@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_ioremap() returns NULL on failure, not an ERR_PTR.
Using IS_ERR() to check the return value is incorrect.
Fix this by checking for NULL and returning -ENOMEM.
Fixes: 67ee9ccaa34a ("phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-phy/adjNbuWoc1B-3Ok1@stanley.mountain/
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Link: https://patch.msgid.link/20260413070033.128-1-luyulin@eswincomputing.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared
sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base
table to fix Gear 4 operation on SM8650.
However, this change inadvertently broke kaanapali and SM8750 SoCs
which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5
configuration but use their own sm8750_ufsphy_pcs base table. After the
change, kaanapali PHYs are left without the required PLL_CNTL = 0x33
setting, causing the PHY PLL to remain at its hardware reset default
value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts.
Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry
to the sm8750_ufsphy_pcs table, mirroring what the original commit
already did for sm8650_ufsphy_pcs.
Cc: stable@vger.kernel.org # v6.19.12
Fixes: 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing PHYPARAM0 tuning values for Exynos7870 are incorrect,
causing the USB 2.0 PHY to fail high-speed negotiation and fall back
to full-speed (12Mbps) operation.
Fix TXVREFTUNE (transmitter voltage reference) from 14 to 3,
TXRESTUNE (transmitter impedance) from 3 to 2, and SQRXTUNE
(squelch threshold) from 6 to 5. Also explicitly set
TXPREEMPPULSETUNE to 0, which was previously missing from the
tuning table despite being included in the register mask.
All values are derived from the vendor kernel for the Samsung
Galaxy A6 (SM-A600FN), as no public hardware documentation is
available for the Exynos7870 USB DRD PHY. With these corrections,
the PHY successfully negotiates high-speed (480Mbps) operation.
Fixes: 588d5d20ca8d ("phy: exynos5-usbdrd: add exynos7870 USBDRD support")
Cc: stable@vger.kernel.org
Tested-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Łukasz Lebiedziński <kernel@lvkasz.us>
Link: https://patch.msgid.link/20260406135627.234835-1-kernel@lvkasz.us
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing code reads a single hs_term_range_adj value from bit field
[10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly.
However, on SoCs that support per-pad termination, each pad has its own
hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3
in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13]
respectively.
Fix the calibration by reading per-pad values from the appropriate fuse
registers. For SoCs that do not support per-pad termination, replicate
pad 0's value to all pads to maintain existing behavior.
Add a has_per_pad_term flag to the SoC data to indicate whether per-pad
termination values are available in FUSE_USB_CALIB_EXT_0.
Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rename QSERDES TXRX v2 registers and the header to make version
explicit.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-7-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
None of qcom-qmp drivers uses header qserdes-com or qserdes-txrx-v2.
Drop them.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-6-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 81791c45c8e0 ("phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config
and DP mode support") chose to name QCS615 DP PHY variables/functions
with qmp_v2 prefix, by assuming that QMP PHY registers are versioned
as a whole. However, the reality is that the registers are versioned
in sub-modules like QSERDES COM and QSERDES TXRX respectively, e.g.
QCS615 DP PHY has registers of QSERDES COM v2 and QSERDES TXRX v3.
Thus it may cause confusion that qmp_v2_xxx table and functions access
QSERDES TXRX v3 registers.
Rename QCS615 DP PHY variables and functions to be prefixed by qcs615
instead of qmp_v2. This better aligns with how the driver names USB3 PHY
variables for QCM2290 etc.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-5-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The register definitions in header qserdes-txrx-v2 and qserdes-txrx-v3
are actually identical. Considering that QSERDES TX/RX v2 is already
defined by header qserdes-txrx, qserdes-txrx-v2 is really just
a duplication of qserdes-txrx-v3 for QSERDES TX/RX v3. Switch
qcom-qmp-usbc driver to use v3 registers.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-4-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As the code comments in the headers say, both qserdes-com and
qserdes-com-v2 define QSERDES COM registers for QMP V2 PHY. Switch
phy-qcom-qmp drivers to use register definitions in qserdes-com-v2
to make the QSERDES COM version explicit.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-3-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A few registers that could be used by phy-qcom-qmp drivers are missing
from qserdes-com-v2 header. Add them.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314051325.198137-2-shengchao.guo@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The mvebu_a3700_utmi_phy_power_off() function tries to modify the
USB2_PHY_CTRL register by using the IO address of the PHY IP block along
with the readl/writel IO accessors. However, the register exist in the
USB miscellaneous register space, and as such it must be accessed via
regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function.
Change the code to use regmap_update_bits() for modífying the register
to fix this.
Fixes: cc8b7a0ae866 ("phy: add A3700 UTMI PHY driver")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
Vladimir Oltean
Krishna Chaitanya Chundru
Uwe Kleine-König (The Capable Hub)
Marco Crivellari
Ioana Ciornei
Shawn Lin
Xiangxu Yin
Val Packett
Rosen Penev
David Carlier
Caleb James DeLisle
Jianwei Zheng
Jonas Karlman
Andy Shevchenko
Geert Uytterhoeven
Alexander Stein
Théo Lebrun
Biju Das
Felix Gu
Wesley Cheng
Yulin Lu
Nitin Rawat
Łukasz Lebiedziński
Wayne Chang
Shawn Guo
Gabor Juhos