| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull pin control updates from Linus Walleij:
"This is the bulk of the pin control changes for the v5.9 kernel
series:
Core changes:
- The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
macro" was put in an immutable branch and merged into the pinctrl
tree as well. We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have been
modularized. This is driven by the Google Android GKI initiative I
think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
pinctrl: stmfx: Use irqchip template
pinctrl: amd: Use irqchip template
pinctrl: mediatek: fix build for tristate changes
pinctrl: samsung: Use bank name as irqchip name
pinctrl: core: print gpio in pins debugfs file
pinctrl: mediatek: add mt6779 eint support
pinctrl: mediatek: add pinctrl support for MT6779 SoC
pinctrl: mediatek: avoid virtual gpio trying to set reg
pinctrl: mediatek: update pinmux definitions for mt6779
pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
pinctrl: mcp23s08: Use irqchip template
pinctrl: sx150x: Use irqchip template
dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
pinctrl: intel: Add Intel Emmitsburg pin controller support
pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
Revert "gpio: omap: handle pin config bias flags"
pinctrl: single: Use fallthrough pseudo-keyword
pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
pinctrl: baytrail: Use fallthrough pseudo-keyword
...
|
|
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.9 kernel cycle.
There is nothing too exciting in it, but a new macro that fixes a
build failure on a minor ARM32 platform that appeared yesterday is
part of it so we better merge it.
Core changes:
- Introduce the for_each_requested_gpio() macro to help in dependent
code all over the place. Also patch a few locations to use it while
we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then make a
set of refactorings and improvements to this code. We are setting
the stage to revamp the userspace API a bit in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other drivers
requesting their own IRQ while using the core GPIO IRQ helpers to
pass the GPIO irq chip as a template instead of calling the
explicit set-up functions. Next merge window we may retire the old
code altogether"
* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
gpio: wcove: Request IRQ after all initialisation done
gpio: crystalcove: Free IRQ on error path
gpio: pca953x: Request IRQ after all initialisation done
gpio: don't use same lockdep class for all devm_gpiochip_add_data users
gpio: max732x: Use irqchip template
gpio: stmpe: Move chip registration
gpio: rcar: Use irqchip template
gpio: regmap: fix type clash
gpio: Correct kernel-doc inconsistency
gpio: pci-idio-16: Use irqchip template
gpio: pcie-idio-24: Use irqchip template
gpio: 104-idio-16: Use irqchip template
gpio: 104-idi-48: Use irqchip template
gpio: 104-dio-48e: Use irqchip template
gpio: ws16c48: Use irqchip template
gpio: omap: improve coding style for pin config flags
gpio: dln2: Use irqchip template
gpio: sch: Add a blank line between declaration and code
gpio: sch: changed every 'unsigned' to 'unsigned int'
gpio: ich: changed every 'unsigned' to 'unsigned int'
...
|
|
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://lore.kernel.org/r/20200721131814.357182-1-linus.walleij@linaro.org
|
|
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sandeep Singh <sandeep.singh@amd.com>
Link: https://lore.kernel.org/r/20200722101545.144373-1-linus.walleij@linaro.org
|
|
Export mtk_is_virt_gpio() for the case when
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=m
to fix this build error:
ERROR: modpost: "mtk_is_virt_gpio" [drivers/pinctrl/mediatek/pinctrl-paris.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/d15827a3-d0c8-e231-9f61-8507b3d7be3a@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the bank name as the irqchip name. This name is later visible in
/proc/interrupts, what makes it possible to easily identify each
GPIO interrupt.
/proc/interrupts before this patch:
143: 0 exynos4210_wkup_irq_chip 7 Edge hdmi
144: 0 exynos4210_wkup_irq_chip 6 Level wm8994
145: 1 exynos4210_wkup_irq_chip 7 Edge max77686-pmic, max77686-rtc
146: 1 exynos_gpio_irq_chip 3 Edge 3-0048
/proc/interrupts after this patch:
143: 0 gpx3 7 Edge hdmi
144: 0 gpx3 6 Level wm8994
145: 1 gpx0 7 Edge max77686-pmic, max77686-rtc
146: 1 gpm2 3 Edge 3-0048
Handling of the eint_wake_mask_value has been reworked, because each bank
has now its own exynos_irq_chip structure allocated.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200720145412.24221-1-krzk@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If there is a gpio range mapping for the pin, then print out the gpio
chip and line index for the pin in the debugfs 'pins' file with the
format: "[line-index]:[gpio-label]"
Here is example output on the BeagleBoard.org PocketBeagle (AM3358):
/sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single/pins
pin 25 (PIN25) 25:gpio-32-63 44e10864 00000037 pinctrl-single
pin 26 (PIN26) 26:gpio-32-63 44e10868 00000037 pinctrl-single
pin 27 (PIN27) 27:gpio-32-63 44e1086c 00000037 pinctrl-single
pin 28 (PIN28) 0:? 44e10870 00000036 pinctrl-single
pin 29 (PIN29) 0:? 44e10874 00000006 pinctrl-single
pin 30 (PIN30) 28:gpio-32-63 44e10878 00000027 pinctrl-single
pin 31 (PIN31) 29:gpio-32-63 44e1087c 00000037 pinctrl-single
pin 32 (PIN32) 30:gpio-32-63 44e10880 00000037 pinctrl-single
pin 33 (PIN33) 31:gpio-32-63 44e10884 00000037 pinctrl-single
pin 34 (PIN34) 0:gpio-64-95 44e10888 00000037 pinctrl-single
pin 35 (PIN35) 1:gpio-64-95 44e1088c 00000037 pinctrl-single
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200722122751.266440-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
add driver setting to support mt6779 eint
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-6-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This adds MT6779 pinctrl driver based on MediaTek pinctrl-paris core.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-5-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
for virtual gpios, they should not do reg setting and
should behave as expected for eint function.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/1595503197-15246-4-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull pin control fix from Linus Walleij:
"A single last minute pin control fix to the Qualcomm driver fixing
missing dual edge PCH interrupts"
* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
|
|
Use the hwspin_lock_timeout_in_atomic() API which is the most appropriated
here. Indeed:
- hwspin_lock_() is called after spin_lock_irqsave()
- the hwspin_lock_timeout() API relies on jiffies count which won't work
if IRQs are disabled which is the case here.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20200615124456.27328-1-alexandre.torgue@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Jason Kridner <jkridner@gmail.com>
Link: https://lore.kernel.org/r/20200721125223.344411-1-linus.walleij@linaro.org
|
|
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200721132537.362160-1-linus.walleij@linaro.org
|
|
intel-pinctrl for v5.9-1
* New driver for Emmitsburg
* New driver for Tiger Lake-H
* Part 3 of Cherryview driver clean up
* Fix a glitch on Baytrail platforms
The following is an automated git shortlog grouped by driver:
ARM/orion/gpio:
- Make use of for_each_requested_gpio()
at91:
- Make use of for_each_requested_gpio()
baytrail:
- Use fallthrough pseudo-keyword
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
- Drop no-op ACPI_PTR() call
cherryview:
- Re-use data structures from pinctrl-intel.h (part 3)
- Convert chv_writel() to use chv_padreg()
- Introduce helpers to IO with common registers
- Introduce chv_readl() helper
gpio:
- xra1403: Make use of for_each_requested_gpio()
- mvebu: Make use of for_each_requested_gpio()
gpiolib:
- Introduce for_each_requested_gpio_in_range() macro
intel:
- Add Intel Emmitsburg pin controller support
- Make use of for_each_requested_gpio_in_range()
- Protect IO in few call backs by lock
- Split intel_config_get() to three functions
- Drop the only label in the code for consistency
- Get rid of redundant 'else' in intel_config_set_debounce()
- Make use of IRQ_RETVAL()
- Reduce scope of the lock
- Disable input and output buffer when switching to GPIO
- Allow drivers to define ACPI address space ID
- Allow drivers to define total amount of IRQs per community
lynxpoint:
- Drop no-op ACPI_PTR() call
- Introduce helpers to enable or disable input
- Make use of for_each_requested_gpio()
merrifield:
- Add I²S bus 2 pins to groups and functions
- Update pin names in accordance with official list
tigerlake:
- Add support for Tiger Lake-H
|
|
This driver adds pinctrl/GPIO support for Intel Emmitsburg PCH. The
GPIO controller is based on the next generation GPIO hardware but still
compatible with the one supported by the Intel core pinctrl/GPIO driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718120807.19714-1-grandmaster@al2klimov.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200716212317.GA17754@embeddedor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200716212213.GA17623@embeddedor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200716212109.GA17525@embeddedor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
pinctrl: sh-pfc: Updates for v5.9 (take two)
- Add support for the new RZ/G2H (R8A774E1) SoC,
- One more conversion of DT bindings to json-schema,
- Fix RZ/A1 kerneldoc.
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200713183541.36963-1-grandmaster@al2klimov.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
'struct amd_gpio_acpi_match' becomes defined but unused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-amd.c:959:36: warning: ‘amd_gpio_acpi_match’ defined but not used [-Wunused-const-variable=]
959 | static const struct acpi_device_id amd_gpio_acpi_match[] = {
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ken Xue <Ken.Xue@amd.com>
Cc: "Wu, Jeff" <Jeff.Wu@amd.com>
Cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Cc: Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-26-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Correct misspellings and provide missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'start_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'val' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_pin' not described in 'armada_37xx_pin_group'
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_npins' not described in 'armada_37xx_pin_group'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-25-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It has never been used.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/meson/pinctrl-meson-a1.c:749:27: warning: ‘i2c_slave_groups’ defined but not used [-Wunused-const-variable=]
749 | static const char const i2c_slave_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Qianggui Song <qianggui.song@amlogic.com>
Cc: linux-amlogic@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-24-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Both PIN_PINGROUP_ENTRY_Y() and DRV_PINGROUP_ENTRY_Y() macros are
called for each of the 2 pin groups defined here, and both of them
initialise 'drv_reg', causing the compiler to complain.
Only initialise 'drv_reg' once.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init]
71 | .drv_reg = ((r)), | ^
drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’
105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’
124 | drive_##pg_name, | ^~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’
128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0,
| ^~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[0].drv_reg’)
71 | .drv_reg = ((r)), | ^
drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’
105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’
124 | drive_##pg_name, | ^~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’
128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0,
| ^~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init]
71 | .drv_reg = ((r)), | ^
drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’
107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’
124 | drive_##pg_name, | ^~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’
130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0,
| ^~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[1].drv_reg’)
71 | .drv_reg = ((r)), | ^
drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’
107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0)
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’
124 | drive_##pg_name, | ^~~~~~
drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’
130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0,
| ^~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-23-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add some missing attributes/parameter descriptions, remove other
superfluous ones, add struct header titles and fix misspellings.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function'
drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin'
drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry'
drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set'
drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle'
drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: linux-omap@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Depending on how you look at it, you can either say that:
a) There is a PDC hardware issue (with the specific IP rev that exists
on sc7180) that causes the PDC not to work properly when configured
to handle dual edges.
b) The dual edge feature of the PDC hardware was only added in later
HW revisions and thus isn't in all hardware.
Regardless of how you look at it, let's work around the lack of dual
edge support by only ever letting our parent see requests for single
edge interrupts on affected hardware.
NOTE: it's possible that a driver requesting a dual edge interrupt
might get several edges coalesced into a single IRQ. For instance if
a line starts low and then goes high and low again, the driver that
requested the IRQ is not guaranteed to be called twice. However, it
is guaranteed that once the driver's interrupt handler starts running
its first instruction that any new edges coming in will cause the
interrupt to fire again. This is relatively commonplace for dual-edge
gpio interrupts (many gpio controllers require software to emulate
dual edge with single edge) so client drivers should be setup to
handle it.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200714080254.v3.1.Ie0d730120b232a86a4eac1e2909bcbec844d1766@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Demote headers which are clearly not kerneldoc, provide titles for
struct definition blocks, fix API slip (bitrot) misspellings and
provide some missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux '
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data'
drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group'
drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-rockchip@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pctrldev' not described in 'bm1880_pinctrl'
drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pinconf' not described in 'bm1880_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-19-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The documentation header for 'struct at91_pinctrl_mux_ops' was missing
entries for {g,s}et_drivestrength and {g,s}et_slewrate.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:77: warning: cannot understand function prototype: 'enum drive_strength_bit '
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_drivestrength' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_slewrate' not described in 'at91_pinctrl_mux_ops'
drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_slewrate' not described in 'at91_pinctrl_mux_ops'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-18-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_wakeup_sources' not described in 'atmel_pioctrl'
drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_suspend_backup' not described in 'atmel_pioctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-16-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix a spelling/typo while we're here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinconf-generic.c:242: warning: Function parameter or member 'pctldev' not described in 'pinconf_generic_parse_dt_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-15-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'map' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'num_maps' not described in 'pinctrl_dt_map'
drivers/pinctrl/devicetree.c:409: warning: Function parameter or member 'out_args' not described in 'pinctrl_parse_index_with_args'
drivers/pinctrl/devicetree.c:409: warning: Excess function parameter 'out_arts' description in 'pinctrl_parse_index_with_args'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-14-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
And rename another which has probably bitrotted.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinmux.c:83: warning: Function parameter or member 'pctldev' not described in 'pinmux_can_be_used_for_gpio'
drivers/pinctrl/pinmux.c:108: warning: Function parameter or member 'pctldev' not described in 'pin_request'
drivers/pinctrl/pinmux.c:261: warning: Function parameter or member 'gpio' not described in 'pinmux_request_gpio'
drivers/pinctrl/pinmux.c:751: warning: Function parameter or member 'selector' not described in 'pinmux_generic_get_function'
drivers/pinctrl/pinmux.c:751: warning: Excess function parameter 'group_selector' description in 'pinmux_generic_get_function'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-13-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Most are likely due to bitrot/API slip. Some are formatting issues.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/core.c:167: warning: Function parameter or member 'pin' not described in 'pin_get_name'
drivers/pinctrl/core.c:167: warning: Excess function parameter 'name' description in 'pin_get_name'
drivers/pinctrl/core.c:584: warning: Function parameter or member 'selector' not described in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:584: warning: Excess function parameter 'gselector' description in 'pinctrl_generic_get_group'
drivers/pinctrl/core.c:1356: error: Cannot parse struct or union!
drivers/pinctrl/core.c:1458: warning: Function parameter or member 'map' not described in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:1458: warning: Excess function parameter 'maps' description in 'pinctrl_unregister_mappings'
drivers/pinctrl/core.c:2239: warning: Function parameter or member 'pctldev' not described in 'devm_pinctrl_register_and_init'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-12-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Not all sourcefiles which end up including pinctrl-mtk-common-v2.h make use
of 'mtk_default_register_base_names' and there is nowhere we can place the
definition to void the need for __maybe_unused except its own headerfile,
which seems like overkill. So instead we tell the compiler that it's okay
for it to be unused by some of the consumers.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:19:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-moore.h:25,
from drivers/pinctrl/mediatek/pinctrl-moore.c:12:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-paris.c:15:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h:15,
from drivers/pinctrl/mediatek/pinctrl-mt6797.c:13:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt8183.c:9:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27,
from drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h:12,
from drivers/pinctrl/mediatek/pinctrl-mt6765.c:10:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=]
83 | static const char const mtk_default_register_base_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200713144930.1034632-11-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm8976.c:802:27: warning: ‘nav_tsync_groups’ defined but not used [-Wunused-const-variable=]
802 | static const char
const nav_tsync_groups[] = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Del Regno <kholk11@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-10-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Kerneldoc struct titles must be followed by whitespace else the
checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c64xx.c:212: warning: cannot understand function prototype: 'struct s3c64xx_eint0_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-9-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Kerneldoc struct titles must be followed by whitespace. Also attributes
need to be in the format '@.*: ' else the checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-s3c24xx.c:100: warning: cannot understand function prototype: 'struct s3c24xx_eint_domain_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-8-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/samsung/pinctrl-samsung.c:1149: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_suspend'
drivers/pinctrl/samsung/pinctrl-samsung.c:1199: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_resume'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-7-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing descriptions for attributes and fix 1 formatting issue.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'desc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'irq_chip' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'intr_target_use_scm' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'soc' not described in 'msm_pinctrl'
drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'phys_base' not described in 'msm_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20200713144930.1034632-6-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit'
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There has been little to no attempt to document any of the demoted
structures here. These are obviously not kerneldoc headers.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function '
drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
>From ill formatted kerneldoc, to incomplete *and* incorrect struct headers,
through to formatting issues and missing attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/sirf/pinctrl-atlas7.c:197: warning: Function parameter or member 'id' not described in 'atlas7_pad_config'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'func' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'pull' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'dstr' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'reserved' not described in 'atlas7_pad_status'
drivers/pinctrl/sirf/pinctrl-atlas7.c:359: warning: Cannot understand * @dev: a pointer back to containing device
on line 359 - I thought it was a doc line
drivers/pinctrl/sirf/pinctrl-atlas7.c:4794: warning: Function parameter or member 'pad_type' not described in 'atlas7_pull_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:4917: warning: Function parameter or member 'reserved' not described in 'atlas7_ds_info'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'a7gc' not described in 'atlas7_gpio_to_bank'
drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'gpio' not described in 'atlas7_gpio_to_bank'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20200713144930.1034632-3-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'clk' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq_chip' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'num_irq' not described in 'owl_pinctrl'
drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq' not described in 'owl_pinctrl'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: David Liu <liuwei@actions-semi.com>
Link: https://lore.kernel.org/r/20200713144930.1034632-2-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
WiFi APs. ]
Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Link: https://lore.kernel.org/r/20200703080646.23233-1-computersforpeace@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The default pinmux configuration for Y23 is to route a heartbeat to
drive a LED. Previous revisions of the AST2600 datasheet did not include
a description of this function.
Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200701030756.2834657-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We need to iterate over each pin in a group for a function and
disable higher priority mux configurations on the pin before finally
muxing the relevant function's signal. With the current debug output it
is hard to track what register output is relevant to which operation, so
break up the actions in the debug output by providing some more context.
Before:
[ 5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341
[ 5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
After:
[ 5.298053] Muxing pin 37 for GPIO
[ 5.298294] Disabling signal NRI4 for NRI4
[ 5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.298983] Disabling signal RGMII4RXD1 for RGMII4
[ 5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.299694] Disabling signal RMII4RXD1 for RMII4
[ 5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000
[ 5.300396] Enabling signal GPIOE5 for GPIOE5
[ 5.300687] Muxed pin 37 as GPIOE5
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
Linus Torvalds
Linus Walleij
Randy Dunlap
Marek Szyprowski
Drew Fustini
Hanks Chen
Fabien Dessenne
Andy Shevchenko
Alexander A. Klimov
Gustavo A. R. Silva
Lee Jones
Douglas Anderson
Jaiganesh Narayanan
Andrew Jeffery