aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/rtc/rtc-omap.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-04rtc: omap: prevent disabling of clock/module during suspendTero Kristo1-6/+26
If RTC is running from an internal clock source, the RTC module can't be disabled; otherwise it stops ticking completely. Current suspend handler implementation disables the clock/module unconditionally, instead fix this by disabling the clock only if we are running on external clock source, which is not affected by suspend. The prevention of disabling the clock must be done via implementing the runtime_pm handlers for the device, and returning an error code from the runtime suspend handler; otherwise OMAP core PM will disable the clocks for the driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: omap: Fix selecting external oscLokesh Vutla1-2/+4
RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: omap: Support ext_wakeup configurationMarcin Niestroj1-8/+160
Support configuration of ext_wakeup sources. This patch makes it possible to enable ext_wakeup and set it's polarity, depending on board configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to notify about power-button presses. Handling power-button presses enables to recover from RTC-only power states correctly. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-02rtc: constify rtc_class_ops structuresJulia Lawall1-1/+1
Check for rtc_class_ops structures that are only passed to devm_rtc_device_register, rtc_device_register, platform_device_register_data, all of which declare the corresponding parameter as const. Declare rtc_class_ops structures that have these properties as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct rtc_class_ops i@p = { ... }; @ok@ identifier r.i; expression e1,e2,e3,e4; position p; @@ ( devm_rtc_device_register(e1,e2,&i@p,e3) | rtc_device_register(e1,e2,&i@p,e3) | platform_device_register_data(e1,e2,e3,&i@p,e4) ) @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct rtc_class_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: omap: Add external clock enabling supportKeerthy1-1/+24
Configure the clock source to external clock if available. External clock is preferred as it can be ticking during suspend. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: omap: Add internal clock enabling supportKeerthy1-0/+10
The rtc can be clocked by an internal 32K clock. Adding the support to enable the same. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-17drivers/rtc/rtc-omap.c: use module_platform_driverLokesh Vutla1-2/+3
module_platform_driver_probe() prevents driver from requesting probe deferral. So using module_platform_drive() to support probe deferral. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-omap.c: unlock and lock rtc registers before and after register writesLokesh Vutla1-11/+52
RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is released. Currently the driver release the lock in the probe and leaves it enabled until the rtc driver removal. This eliminates the idea of preventing spurious writes when RTC driver is loaded. So implement rtc lock and unlock functions before and after register writes. This is as advised by Paul to implement lock and unlock functions in the driver and not to unlock and leave it in probe. The same discussion can be seen here: http://www.mail-archive.com/linux-omap%40vger.kernel.org/msg111588.html Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-1/+0
Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-10rtc: omap: drop vendor-prefix from power-controller dt propertyJohan Hovold1-1/+1
Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add copyright entryJohan Hovold1-0/+1
Add myself to the list of copyright holders. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix minor coding style issuesJohan Hovold1-19/+27
Fix minor coding style issues like comment style, indentation and remove a few unnecessary casts. Also drop the 1 from OMAP1 in the driver description. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: enable wake-up from power offJohan Hovold1-1/+8
The ALARM interrupt must not be disabled during shutdown in order to be able to power up the system using an RTC alarm. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add support for pmic_power_enJohan Hovold1-0/+100
Add new property "ti,system-power-controller" to register the RTC as a power-off handler. Some RTC IP revisions can control an external PMIC via the pmic_power_en pin, which can be configured to transition to OFF on ALARM2 events and back to ON on subsequent ALARM (wakealarm) events. This is based on earlier work by Colin Foe-Parker and AnilKumar Ch. [1] [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg82127.html [akpm@linux-foundation.org: add comment] Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Colin Foe-Parker <colin.foeparker@logicpd.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read 32-bit registersJohan Hovold1-0/+5
Add helper to read full register width. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read raw bcd timeJohan Hovold1-8/+10
Add helper to read raw BCD time that can be used in interrupt context. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: silence bogus power-up reset message at probeJohan Hovold1-6/+13
Some legacy RTC IP revisions has a power-up reset flag in the status register that later revisions lack. As this flag is always read back as set on later revisions (or is overloaded with a different flag), make sure to only clear the flag and print the info message on legacy platforms. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add structured device-type infoJohan Hovold1-52/+51
Add structured device-type info to encode IP-block revision differences. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove DRIVER_NAME macroJohan Hovold1-5/+3
Remove DRIVER_NAME macro which was used for unrelated strings (e.g. id-table entry and module name), but not for related ones (e.g. module name and alias). Also move the module alias to the other module-info entries. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add device abstractionJohan Hovold1-106/+133
Add struct omap_rtc to hold previously global data as well as the IP-block feature flags. Also convert the register-access macros to proper inline helper functions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: make platform-device id table constJohan Hovold1-1/+1
Make platform-device id table const. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: use dev_infoJohan Hovold1-4/+3
Use dev_info rather than pr_info. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove unused register-base defineJohan Hovold1-2/+0
Remove register-base define, which is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix class-device registrationJohan Hovold1-23/+23
Make sure not to register the class device until after the device has been configured. Currently, the device is not fully configured (e.g. 24-hour mode) when the class device is registered, something which involves driver callbacks for example to read the current time. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: clean up probe error handlingJohan Hovold1-23/+18
Remove some debug messages and return errors from subsystems rather than always fail with -EIO. Note that the class-registration error has already been logged by rtc core. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix interrupt disable at probeJohan Hovold1-3/+5
Use writel instead of writeb when disabling interrupts at probe as ALARM2 is not cleared otherwise on some IP-block revisions (e.g. AM3352). Note that the driver currently never enables the ALARM2 interrupt. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix missing wakealarm attributeJohan Hovold1-2/+3
The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65d098 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix clock-source configurationJohan Hovold1-2/+4
This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-06drivers/rtc/rtc-omap.c: enable RTC_IRQWAKEEN bits when Alarm is setLokesh Vutla1-34/+33
When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep in IDLE state. The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE state. In order to do so, the alarm needs to be set and enabled before RTC enters the IDLE state. Also the wakeup generation for alarm/timer event needs to be set (bits [1:0] in RTC_IRQWAKEEN register). Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths. With this ALARM interrupts are not generated when it enters IDLE state. So programming the RTC_IRQWAKEEN bits when ever ALARM is set. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: add support for enabling 32khz clockSekhar Nori1-1/+15
Newer versions of OMAP RTC IP such as those found in AM335x and DRA7x need an explicit enable of 32khz functional clock which ticks the RTC. AM335x support was working so far because of settings done in U-Boot. However, the DRA7x U-Boot does no such enable of 32khz clock and this patch is need to get the RTC to work on DRA7x at least. In general, it is better to not depend on settings done in U-Boot. Thanks to Lokesh Vutla for noticing this. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: use BIT() macroSekhar Nori1-21/+21
Use BIT() macro for RTC_HAS_<FEATURE> defines instead of hand-writing bit masks. Use BIT() macros for register bit field definitions. While at it, fix indentation done using spaces. No functional change in this patch. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: remove multiple device id checksSekhar Nori1-4/+9
Remove multiple superfluous device id checks. Since an id_table is present in the driver probe() should never encounter an empty device id entry. In case of OF style match, of_match_device() returns an matching entry. For paranoia sake, check for device id entry once and fail probe() if none is found. This is much better than checking for it multiple times. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/rtc/rtc-omap.c: remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11drivers/rtc/rtc-omap.c: add rtc wakeup support to alarm eventsHebbar Gururaja1-8/+52
On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is available to enable Alarm Wakeup feature. This register needs to be properly handled for the rtcwake to work properly. Platforms using such IP should set "ti,am3352-rtc" in rtc device dt compatibility node. Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: omap: restore back (hard-code) wakeup supportHebbar Gururaja1-0/+2
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-omap.c: include <linux/io.h> instead of <asm/io.h>Sachin Kamat1-3/+1
Use #include <linux/io.h> instead of <asm/io.h> as pointed out by checkpatch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: George G. Davis <gdavis@mvista.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-18drivers/rtc: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-04-29rtc: rtc-omap: convert omap_rtc_driver to dev_pm_opsJingoo Han1-14/+10
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/rtc/rtc-omap.c: update to devm_* APIVishwanathrao Badarkhe, Manish1-36/+9
Update the code to use devm_* API so that driver core will manage resources. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-omap: use module_platform_driver_probe()Jingoo Han1-11/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: add runtime pm supportVaibhav Hiremath1-0/+18
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX. Driver currently doesn't handle any clocks, which may be right for OMAP1 architecture but in case of AM33XX, the clock/module needs to be enabled in order to access the registers. So convert this driver to runtime pm, which internally handles rest. [afzal@ti.com: handle error path] Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: dt supportAfzal Mohammed1-0/+18
Enhance rtc-omap driver with DT capability Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: kicker mechanism supportAfzal Mohammed1-3/+41
OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/rtc: remove IRQF_DISABLEDYong Zhang1-2/+2
Since commit e58aa3d2d0cc ("genirq: run irq handlers with interrupts disabled") we run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled - see commit b738a50a2026 ("genirq: warn when handler enables interrupts"). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03rtc-omap: fix initialization of control registerDaniel Glöckner1-1/+1
As the comment explains, the intention of the code is to clear the OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be kept. OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER, OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off being cleared. Signed-off-by: Daniel Glöckner <dg@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18RTC: rtc-omap: Fix a leak of the IRQ during init failureAxel Lin1-1/+1
In omap_rtc_probe error path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Link: http://lkml.kernel.org/r/%3C1303005778.2889.2.camel%40phoenix%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-09RTC: Clean out UIE icotl implementationsJohn Stultz1-39/+0
With the generic RTC rework, the UIE mode irqs are handled in the generic layer, and only hardware specific ioctls get passed down to the rtc driver layer. So this patch removes the UIE mode ioctl handling in the rtc driver layer, which never get used. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz1-9/+19
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-01-13drivers/rtc/rtc-omap.c: fix a memory leakAxel Lin1-2/+4
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Also add a missing iounmap() in omap_rtc_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.