aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/scsi/qla2xxx/qla_nvme.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche1-5/+1
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-18scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"Nilesh Javali1-5/+0
This fixes the regression of NVMe discovery failure during driver load time. This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99. Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Increase max limit of ql2xnvme_queuesShreyas Deodhar1-5/+10
Increase max limit of ql2xnvme_queues to (max_qpair - 1). Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com Fixes: 65120de26a54 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requestsArun Easi1-0/+17
At NVMe ELS request time, request structure is DMA mapped and never unmapped. Fix this by calling the unmap on ELS completion. Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix loss of NVMe namespaces after driver reload testArun Easi1-10/+20
Driver registration of localport can race when it happens at the remote port discovery time. Fix this by calling the registration under a mutex. Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reported-by: Marco Patalano <mpatalan@redhat.com> Tested-by: Marco Patalano <mpatalan@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix disk failure to rediscoverQuinn Tran1-0/+5
User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing. Set the online state before reporting of the availability of the session. Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queuesShreyas Deodhar1-2/+14
Add ql2xnvme_queues module parameter to configure number of NVMe queues Usage: Number of NVMe Queues that can be configured. Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues), 1 - Minimum number of queues supported 8 - Default value 128 - Maximum number of queues supported Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: qla2xxx: Synchronize rport dev_loss_tmo settingHannes Reinecke1-1/+4
Currently, the dev_loss_tmo setting is only ever used for SCSI devices. This patch reshuffles initialisation such that the SCSI remote ports are registered before the NVMe ones, allowing the dev_loss_tmo setting to be synchronized between SCSI and NVMe. Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+18
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-20qla2xxx: add ->map_queues support for nvmeSaurav Kashyap1-0/+15
Implement ->map queues and use the block layer blk_mq_pci_map_queues helper for mapping queues to CPUs. With this mapping minimum 10%+ increase in performance is noticed. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-14scsi: qla2xxx: Call process_response_queue() in Tx pathShreyas Deodhar1-0/+6
Process responses in Tx path if any available for better performance. Link: https://lore.kernel.org/r/20210908164622.19240-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: qla2xxx: Fix crash in NVMe abort pathArun Easi1-2/+12
System crash was seen when I/O was run against an NVMe target and aborts were occurring. Crash stack is: -- relevant crash stack -- BUG: kernel NULL pointer dereference, address: 0000000000000010 : #6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e [exception RIP: qla_nvme_abort_work+339] RIP: ffffffffc0f592e3 RSP: ffffae1f8666be80 RFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff9b581fc8af80 RCX: ffffffffc0f83bd0 RDX: 0000000000000001 RSI: ffff9b5839c6c7c8 RDI: 0000000008000000 RBP: ffff9b6832f85000 R8: ffffffffc0f68160 R9: ffffffffc0f70652 R10: ffffae1f862ffdc8 R11: 0000000000000300 R12: 000000000000010d R13: 0000000000000000 R14: ffff9b5839cea000 R15: 0ffff9b583fab170 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184 #8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d #9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed The crash was due to a stale SRB structure access after it was aborted. Fix the issue by removing stale access. Link: https://lore.kernel.org/r/20210908164622.19240-5-njavali@marvell.com Fixes: 2cabf10dbbe3 ("scsi: qla2xxx: Fix hang on NVMe command timeouts") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix hang on NVMe command timeoutsArun Easi1-9/+17
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix hang during NVMe session tear downArun Easi1-1/+1
The following hung task call trace was seen: [ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds. [ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000 [ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx] [ 1230.205639] Call Trace: [ 1230.208100] __schedule+0x2c4/0x700 [ 1230.211607] schedule+0x38/0xa0 [ 1230.214769] schedule_timeout+0x246/0x2f0 [ 1230.222651] wait_for_completion+0x97/0x100 [ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx] [ 1230.232254] process_one_work+0x1a7/0x360 ...when device side port resets were done. Abort threads were getting out without processing due to the "deleted" flag check. The delete thread, meanwhile, could not proceed with a logout (that would have cleared out pending requests) as the logout IOCB work was not progressing. It appears like the hung qlt_free_session_done() thread is causing the ha->wq works on hold. The qlt_free_session_done() was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb to be complete, which would only happen when all I/Os are released. Fix this by allowing abort to progress until device delete is completely done. This should make the qlt_free_session_done() proceed without hang and thus clear up the deadlock. Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Sync queue idx with queue_pair_map idxSaurav Kashyap1-2/+3
The first invocation of function find_first_zero_bit will return 0 and queue_id gets set to 0. An index of queue_pair_map also gets set to 0. qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; In the alloc_queue callback driver checks the map, if queue is already allocated: ha->queue_pair_map[qidx] This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8) since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus is less than 8, max_qpairs is less than 8. This creates wrong value returned as qpair. [ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2 [ 1572.354458] general protection fault: 0000 [#1] SMP PTI [ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1 [ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013 [ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn [ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx] [ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0 [ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246 [ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001 [ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800 [ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800 [ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000 [ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000 [ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000 [ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0 [ 1572.354497] Call Trace: [ 1572.354503] ? check_preempt_curr+0x62/0x90 [ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0 [ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc] [ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730 [ 1572.354515] ? __switch_to_asm+0x35/0x70 [ 1572.354516] ? __switch_to_asm+0x41/0x70 [ 1572.354518] ? __switch_to_asm+0x35/0x70 [ 1572.354519] ? __switch_to_asm+0x41/0x70 [ 1572.354521] ? __switch_to_asm+0x35/0x70 [ 1572.354522] ? __switch_to_asm+0x41/0x70 [ 1572.354523] ? __switch_to_asm+0x35/0x70 [ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca [ 1572.354527] ? __switch_to_asm+0x41/0x70 [ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170 [ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60 [ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0 [ 1572.354535] ? process_one_work+0x1a7/0x360 [ 1572.354537] ? create_worker+0x1a0/0x1a0 [ 1572.354538] ? worker_thread+0x30/0x390 [ 1572.354540] ? create_worker+0x1a0/0x1a0 [ 1572.354541] ? kthread+0x116/0x130 [ 1572.354543] ? kthread_flush_work_fn+0x10/0x10 [ 1572.354545] ? ret_from_fork+0x35/0x40 Fix is to use index 0 for admin and first IO queue. Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Changes to support kdump kernel for NVMe BFSSaurav Kashyap1-22/+18
The MSI-X and MSI calls fails in kdump kernel. Because of this qla2xxx_create_qpair() fails leading to .create_queue callback failure. The fix is to return existing qpair instead of allocating new one and allocate a single hw queue. [ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support, giving up -- 16/-28. [ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode -- ret=-28. [ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode -- ret=-28. .. .. .. [ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle 00000000e7ee499d, idx =1, qsize 32 [ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable. [ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair [ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22) [ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add encryption to I/O pathQuinn Tran1-0/+4
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. After the completion of PLOGI, both sides have authenticated and PRLI completed, encrypted I/Os are allowed to proceed. - Use new firmware API to encrypt traffic on the wire - Add driver parameter to enable|disable EDIF feature # modprobe qla2xxx ql2xsecenable=1 Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22scsi: qla2xxx: Add heartbeat checkQuinn Tran1-0/+4
Use "no-op" mailbox command to check if the adapter firmware is still responsive. Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qla2xxx: Log PCI address in qla_nvme_unregister_remote_port()Daniel Wagner1-1/+1
Pass in fcport->vha to ql_log() in order to add the PCI address to the log. Currently NULL is passed in which gives this confusing log entry: > qla2xxx [0000:00:00.0]-2112: : qla_nvme_unregister_remote_port: unregister remoteport on 0000000009d6a2e9 50000973981648c7 Link: https://lore.kernel.org/r/20210531122444.116655-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix crash in PCIe error handlingQuinn Tran1-2/+8
BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-29scsi: qla2xxx: Simplify the calculation of variablesJiapeng Zhong1-1/+1
Fix the following coccicheck warnings: ./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is equivalent to !A || B. Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Wait for ABTS response on I/O timeouts for NVMeBikash Hazarika1-1/+90
FW needs to wait for an ABTS response before completing the I/O. Link: https://lore.kernel.org/r/20210111093134.1206-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Handle aborts correctly for port undergoing deletionSaurav Kashyap1-1/+1
Call trace observed while shutting down the adapter ports (LINK DOWN). Handle aborts correctly. localhost kernel: INFO: task nvme:44209 blocked for more than 120 seconds. localhost kernel: "echo 0 >/proc/sys/kernel/hung_task_timeout_secs" disables this message. localhost kernel: nvme D ffff88b45fb5acc0 0 44209 1 0x00000080 localhost kernel: Call Trace: localhost kernel: [<ffffffffbd187169>] schedule+0x29/0x70 localhost kernel: [<ffffffffbd184c51>] schedule_timeout+0x221/0x2d0 localhost kernel: [<ffffffffbcad7229>] ? ttwu_do_wakeup+0x19/0xe0 localhost kernel: [<ffffffffbcad735f>] ? ttwu_do_activate+0x6f/0x80 localhost kernel: [<ffffffffbcada830>] ? try_to_wake_up+0x190/0x390 localhost kernel: [<ffffffffbd18751d>] wait_for_completion+0xfd/0x140 localhost kernel: [<ffffffffbcadaaf0>] ? wake_up_state+0x20/0x20 localhost kernel: [<ffffffffbcabe3da>] flush_work+0x10a/0x1b0 localhost kernel: [<ffffffffbcabb0f0>] ? move_linked_works+0x90/0x90 localhost kernel: [<ffffffffbcabe6cf>] flush_delayed_work+0x3f/0x50 localhost kernel: [<ffffffffc0452767>] nvme_fc_init_ctrl+0x657/0x6a0 [nvme_fc] localhost kernel: [<ffffffffc045293a>] nvme_fc_create_ctrl+0x18a/0x210 [nvme_fc] localhost kernel: [<ffffffffc028962f>] nvmf_dev_write+0x98f/0xb35 [nvme_fabrics] localhost kernel: [<ffffffffbcd08927>] ? security_file_permission+0x27/0xa0 localhost kernel: [<ffffffffbcc4db50>] vfs_write+0xc0/0x1f0 localhost kernel: [<ffffffffbcc4e92f>] SyS_write+0x7f/0xf0 localhost kernel: [<ffffffffbd193f92>] system_call_fastpath+0x25/0x2a Link: https://lore.kernel.org/r/20201202132312.19966-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Don't check for fw_started while posting NVMe commandSaurav Kashyap1-8/+4
NVMe commands can come only after successful addition of rport and NVMe connect, and rport is only registered after FW started bit is set. Remove the redundant check. Link: https://lore.kernel.org/r/20201202132312.19966-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Return EBUSY on fcport deletionDaniel Wagner1-2/+4
When the fcport is about to be deleted we should return EBUSY instead of ENODEV. Only for EBUSY will the request be requeued in a multipath setup. Also return EBUSY when the firmware has not yet started to avoid dropping the request. Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de Link: https://lore.kernel.org/r/20201202132312.19966-2-njavali@marvell.com Reviewed-by: Arun Easi <aeasi@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+4
Pull more SCSI updates from James Bottomley: "The set of core changes here is Christoph's submission path cleanups. These introduced a couple of regressions when first proposed so they got held over from the initial merge window pull request to give more testing time, which they've now had and Syzbot has confirmed the regression it detected is fixed. The other main changes are two driver updates (arcmsr, pm80xx) and assorted minor clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: qla2xxx: Fix return of uninitialized value in rval scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands scsi: sr: Initialize ->cmd_len scsi: arcmsr: Update driver version to v1.50.00.02-20200819 scsi: arcmsr: Add support for ARC-1886 series RAID controllers scsi: arcmsr: Fix device hot-plug monitoring timer stop scsi: arcmsr: Remove unnecessary syntax scsi: pm80xx: Driver version update scsi: pm80xx: Increase the number of outstanding I/O supported to 1024 scsi: pm80xx: Remove DMA memory allocation for ccb and device structures scsi: pm80xx: Increase number of supported queues scsi: sym53c8xx_2: Fix sizeof() mismatch scsi: isci: Fix a typo in a comment scsi: qla4xxx: Fix inconsistent format argument type scsi: myrb: Fix inconsistent format argument types scsi: myrb: Remove redundant assignment to variable timeout scsi: bfa: Fix error return in bfad_pci_init() scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup() scsi: snic: Simplify the return expression of svnic_cq_alloc() scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc() ...
2020-10-14Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds1-2/+1
Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-10-08scsi: qla2xxx: Fix return of uninitialized value in rvalColin Ian King1-1/+1
A previous change removed the initialization of rval and there is now an error where an uninitialized rval is being returned on an error return path. Fix this by returning -ENODEV. Link: https://lore.kernel.org/r/20201008183239.200358-1-colin.king@canonical.com Fixes: b994718760fa ("scsi: qla2xxx: Use constant when it is known") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Acked-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Uninitialized scalar variable")
2020-10-07scsi: qla2xxx: Use constant when it is knownPavel Machek (CIP)1-3/+3
Directly return constant when it is known to make code easier to understand. Link: https://lore.kernel.org/r/20200921112340.GA19336@duo.ucw.cz Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Add SLER and PI control supportSaurav Kashyap1-2/+14
BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15 of special feature control block for enabling SLER in FW. Set bit 8 (SLER supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_14 of special feature control block for enabling PI Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_13 for NVMe Async events. Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Fix I/O errors during LIP reset testsArun Easi1-0/+8
In .fcp_io(), returning ENODEV as soon as remote port delete has started can cause I/O errors. Fix this by returning EBUSY until the remote port delete finishes. Link: https://lore.kernel.org/r/20200904045128.23631-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Performance tweakQuinn Tran1-4/+4
Move statistics fields from vha struct to qpair to reduce memory thrashing. Link: https://lore.kernel.org/r/20200904045128.23631-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Fix I/O failures during remote port toggle testingArun Easi1-1/+1
Driver was using a lower value for dev_loss_tmo making it more prone to I/O failures during remote port toggle testing. Set dev_loss_tmo to zero during remote port registration to allow nvme-fc default dev_loss_tmo to be used, which is higher than what driver was using. Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner1-2/+1
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-15Merge branch '5.9/scsi-fixes' into 5.10/scsi-ufsMartin K. Petersen1-1/+14
Resolve UFS discrepancies between fixes and queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()Tianjia Zhang1-1/+1
On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix null pointer access during disconnect from subsystemQuinn Tran1-0/+5
NVMEAsync command is being submitted to QLA while the same NVMe controller is in the middle of reset. The reset path has deleted the association and freed aen_op->fcp_req.private. Add a check for this private pointer before issuing the command. ... 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e [exception RIP: qla_nvme_post_cmd+394] RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206 RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161 RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220 RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002 R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0 R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc] 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc] 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core] 10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437 11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef 12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402 13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255 -- PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451" 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core] 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc] 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402 10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255 Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hbaArun Easi1-1/+9
qla_nvme_register_hba() puts out a warning when there are not enough queue pairs available for FC-NVME. Just fail the NVME registration rather than a WARNING + call Trace. Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-23scsi: qla2xxx: Set NVMe status code for failed NVMe FCP requestDaniel Wagner1-1/+2
The qla2xxx driver knows when request was processed successfully or not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The upper layer needs to figure out from the rcv_rsplen and transferred_length variables if the request was transferred successfully. This is not always possible, e.g. when the request data length is 0, the transferred_length is also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's inform the upper layer (nvme_fc_fcpio_done()) when something went wrong. nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an error which aligns it with the lpfc driver. Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Fix endianness annotations in source filesBart Van Assche1-4/+4
Fix all endianness complaints reported by sparse (C=2) without affecting the behavior of the code on little endian CPUs. Link: https://lore.kernel.org/r/20200518211712.11395-16-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Cast explicitly to uint16_t / uint32_tBart Van Assche1-2/+2
Casting a pointer to void * and relying on an implicit cast from void * to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous void * casts. Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into lower caseBart Van Assche1-2/+2
This was suggested by Daniel Wagner. Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-10Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block fixes from Jens Axboe: "Here's a set of fixes that should go into this merge window. This contains: - NVMe pull request from Christoph with various fixes - Better discard support for loop (Evan) - Only call ->commit_rqs() if we have queued IO (Keith) - blkcg offlining fixes (Tejun) - fix (and fix the fix) for busy partitions" * tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block: block: fix busy device checking in blk_drop_partitions again block: fix busy device checking in blk_drop_partitions nvmet-rdma: fix double free of rdma queue blk-mq: don't commit_rqs() if none were queued nvme-fc: Revert "add module to ops template to allow module references" nvme: fix deadlock caused by ANA update wrong locking nvmet-rdma: fix bonding failover possible NULL deref loop: Better discard support for block devices loop: Report EOPNOTSUPP properly nvmet: fix NULL dereference when removing a referral nvme: inherit stable pages constraint in the mpath stack device blkcg: don't offline parent blkcg first blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it nvme-tcp: fix possible crash in recv error flow nvme-tcp: don't poll a non-live queue nvme-tcp: fix possible crash in write_zeroes processing nvmet-fc: fix typo in comment nvme-rdma: Replace comma with a semicolon nvme-fcloop: fix deallocation of working context nvme: fix compat address handling in several ioctls
2020-04-04nvme-fc: Revert "add module to ops template to allow module references"James Smart1-1/+0
The original patch was to resolve the lldd being able to be unloaded while being used to talk to the boot device of the system. However, the end result of the original patch is that any driver unload while a nvme controller is live via the lldd is now being prohibited. Given the module reference, the module teardown routine can't be called, thus there's no way, other than manual actions to terminate the controllers. Fixes: 863fbae929c7 ("nvme_fc: add module to ops template to allow module references") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-02-28scsi: qla2xxx: Convert MAKE_HANDLE() from a define into an inline functionBart Van Assche1-1/+1
This patch allows sparse to verify the endianness of the arguments passed to make_handle(). Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-13Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: - stable fix for the bi_size overflow. Not a corruption issue, but a case wher we could merge but disallowed (Andreas) - NVMe pull request via Keith, with various fixes. - MD pull request from Song. - Merge window regression fix for the rq passthrough stats (Logan) - Remove unused blkcg_drain_queue() function (Guoqing) * tag 'for-linus-20191212' of git://git.kernel.dk/linux-block: blk-cgroup: remove blkcg_drain_queue block: fix NULL pointer dereference in account statistics with IDE md: make sure desc_nr less than MD_SB_DISKS md: raid1: check rdev before reference in raid1_sync_request func raid5: need to set STRIPE_HANDLE for batch head block: fix "check bi_size overflow before merge" nvme/pci: Fix read queue count nvme/pci Limit write queue sizes to possible cpus nvme/pci: Fix write and poll queue types nvme/pci: Remove last_cq_head nvme: Namepace identification descriptor list is optional nvme-fc: fix double-free scenarios on hw queues nvme: else following return is not needed nvme: add error message on mismatching controller ids nvme_fc: add module to ops template to allow module references nvmet-loop: Avoid preallocating big SGL for data nvme-fc: Avoid preallocating big SGL for data nvme-rdma: Avoid preallocating big SGL for data
2019-11-27nvme_fc: add module to ops template to allow module referencesJames Smart1-0/+1
In nvme-fc: it's possible to have connected active controllers and as no references are taken on the LLDD, the LLDD can be unloaded. The controller would enter a reconnect state and as long as the LLDD resumed within the reconnect timeout, the controller would resume. But if a namespace on the controller is the root device, allowing the driver to unload can be problematic. To reload the driver, it may require new io to the boot device, and as it's no longer connected we get into a catch-22 that eventually fails, and the system locks up. Fix this issue by taking a module reference for every connected controller (which is what the core layer did to the transport module). Reference is cleared when the controller is removed. Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-08scsi: qla2xxx: Fix double scsi_done for abort pathQuinn Tran1-2/+2
Current code assumes abort will remove the original command from the active list where scsi_done will not be called. Instead, the eh_abort thread will do the scsi_done. That is not the case. Instead, we have a double scsi_done calls triggering use after free. Abort will tell FW to release the command from FW possesion. The original command will return to ULP with error in its normal fashion via scsi_done. eh_abort path would wait for the original command completion before returning. eh_abort path will not perform the scsi_done call. Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce qla2xxx_get_next_handle()Bart Van Assche1-12/+2
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Enable type checking for the SRB free and done callback functionsBart Van Assche1-7/+4
Since all pointers passed to the srb_t.done() and srb_t.free() functions have type srb_t, change the type of the first argument of these functions from void * into struct srb *. This allows the compiler to verify the argument types for these functions. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.