| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add missing compatibles and pdm_domain_data for SDM630 and SDM636.
Unlike their older brother (SDM660) these two cut down SoCs lack CDSP.
Other protection domains are the same as the ones for SDM660.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250217050251.298163-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'struct qmi_elem_info servreg_location_entry_ei' is used only internally
in qcom_pdr_msg.c, so drop the extern declaration to make headers
smaller and code more obvious about intention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250121102817.68577-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There's no consumer calling it left, make the method static.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-4-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Callers of of_qcom_ice_get() leak the device reference taken by
of_find_device_by_node(). Introduce devm variant for of_qcom_ice_get().
Existing consumers need the ICE instance for the entire life of their
device, thus exporting qcom_ice_put() is not required.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-1-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1]
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
CC: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203646.1013708-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit e9f826b0459f ("soc: qcom: pmic_glink: simplify locking with
guard()") was on top of a fix [1] which was moving the 'pg =
__pmic_glink' assignment into the critical section. Unfortunately the
actual fix was not applied and instead rebased version of the next patch
got in. The resulting code is in general correct, but now there is a
duplicated assignment 'pg = __pmic_glink'.
[1] https://lore.kernel.org/all/20240822164815.230167-1-krzysztof.kozlowski@linaro.org/
Fixes: e9f826b0459f ("soc: qcom: pmic_glink: simplify locking with guard()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111172326.101779-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm SM7225 is practically identical to SM6350, so add an entry
using that data.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241220-pd-mapper-sm7225-v1-1-68f85a87288d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 'broadcast' register space is present only in chipsets that
have multiple instances of LLCC IP. Since IPQ5424 has only one
instance, both the LLCC and LLCC_BROADCAST points to the same
register space.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update soc_id table for the Qualcomm QCS9075 SoC
to represent qcs9075 machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Link: https://lore.kernel.org/r/20241229152332.3068172-3-quic_wasimn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The rmtfs class object is never modified and can be made constant.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241202094903.18388-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make it possible to build the module when COMPILE_TEST is enabled for
better build coverage.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241202094903.18388-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If of_parse_phandle_with_args() succeeds, the OF node reference should
be dropped, regardless of number of phandle arguments.
Cc: stable@vger.kernel.org
Fixes: 9460ae2ff308 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Last Level Cache is split into many slices, each one of which can
be toggled on or off.
Only certain slices are recommended to be turned on unconditionally,
in order to reach optimal performance/latency/power levels.
Enable WRCACHE on X1 at boot, in accordance with internal
recommendations.
No significant performance difference is expected.
Fixes: b3cf69a43502 ("soc: qcom: llcc: Add configuration data for X1E80100")
Cc: stable@vger.kernel.org
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241219-topic-llcc_x1e_wrcache-v3-1-b9848d9c3d63@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
X1P42100 is a cousin of X1E80100, and hence can make use of the
latter's configuration. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_soc-v1-3-55347831d73c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling over locks with guard(). In few places this
elimiates error gotos and local variables. Switch to guard() everywhere
(except when jumps would go over scoped guard) for consistency, even if
it does not bring benefit in such places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164815.230167-2-krzysztof.kozlowski@linaro.org
[bjorn: Rebased ontop of v6.13-rc1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
|
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct device_link *link field in struct qcom_ice is only used to
store the result of a device_link_add call with the
DL_FLAG_AUTOREMOVE_SUPPLIER flag. With this flag, the resulting value
can only be used to check whether the link is present or not, as per the
device_link_add description, hence this commit removes the field.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241030025046.303342-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SoC ID for Qualcomm IPQ5424/IPQ5404.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016151528.2893599-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write
to llcc") made the code not configure certain registers on SDM845 due
to firmware security policies. That turned out only to concern SDM845,
but the condition was chosen such that all other entries (for SoCs that
didnot need it) were required to set .need_llcc_cfg = true.
Flip the condition, so the default is "doesn't need the workaround".
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241104-topic-llcc_flip-v1-1-3003c846d131@oss.qualcomm.com
[bjorn: Dropped a few newly added need_llcc_cfg uses]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm driver updates for v6.13
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
* tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (30 commits)
soc: qcom: socinfo: add QCS9100 ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel
dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible
dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs
soc: qcom: socinfo: add support for SA8255P
dt-bindings: arm: qcom: add the SoC ID for SA8255P
soc: qcom: smp2p: Simplify code with dev_err_probe()
soc: qcom: smem: Simplify code with dev_err_probe()
soc: qcom: rpmh-rsc: Simplify code with dev_err_probe()
dt-bindings: soc: qcom: aoss-qmp: document support for SA8255p
dt-bindings: firmware: qcom,scm: document support for SA8255p
dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
soc: qcom: socinfo: add SoC IDs for SAR1130P and SAR2130P
dt-bindings: arm: qcom,ids: add SoC ID for SAR2130P and SAR1130P
dt-bindings: soc: qcom: aoss-qmp: Add SM8750
soc: qcom: socinfo: Add QCS615 SoC ID table entry
dt-bindings: arm: qcom,ids: add SoC ID for QCS615
soc: qcom: smem: Fix up kerneldoc
...
Link: https://lore.kernel.org/r/20241102231953.871067-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add LLCC configuration for the QCS8300 platform. There is an errata on
LB_CNT information on QCS8300 platform, hardcode num_banks to get the
correct value.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241031-qcs8300_llcc-v3-2-bb56952cb83b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add LLCC configuration support for the QCS615 platform.
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Link: https://lore.kernel.org/r/20241010-add_llcc_support_for_qcs615-v2-2-044432450a75@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Implement necessary support for the LLCC control on the SAR1130P and
SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
shift and also require manual override for num_banks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-3-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As pointed out by Konrad Dybcio, we generally should be using decimal
numbers to represent bit positions / bit shifts rather than hex numbers.
Use decimals for consistency.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-2-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/soc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Herve Codina <herve.codina@bootlin.com> # for fsl/qe/{qmc,tsa}.c
Acked-by: Bjorn Andersson <andersson@kernel.org> # qcom parts
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed
Link: https://lore.kernel.org/r/20241029074859.509587-2-u.kleine-koenig@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the ID for the Qualcomm QCS9100 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240911-add_qcs9100_support-v2-2-e43a71ceb017@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SocInfo support for SA8255P.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240910171534.2412263-3-quic_nkela@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-5-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-4-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-2-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some versions of the pmic_glink firmware does not allow dynamic GLINK
intent allocations, attempting to send a message before the firmware has
allocated its receive buffers and announced these intent allocations
will fail. When this happens something like this showns up in the log:
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to send altmode request: 0x10 (-125)
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to request altmode notifications: -125
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI read request: -125
qcom_battmgr.pmic_glink_power_supply pmic_glink.power-supply.0: failed to request power notifications
GLINK has been updated to distinguish between the cases where the remote
is going down (-ECANCELED) and the intent allocation being rejected
(-EAGAIN).
Retry the send until intent buffers becomes available, or an actual
error occur.
To avoid infinitely waiting for the firmware in the event that this
misbehaves and no intents arrive, an arbitrary 5 second timeout is
used.
This patch was developed with input from Chris Lew.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/Zqet8iInnDhnxkT9@hovoldconsulting.com/#t
Cc: stable@vger.kernel.org # rpmsg: glink: Handle rejected intent request better
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20241023-pmic-glink-ecancelled-v2-2-ebc268129407@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In success case, the revision holds a non-null pointer. The current
logic incorrectly returns an error for a non-null pointer, whereas
it should return an error for a null pointer.
The socinfo driver for IPQ9574 and IPQ5332 is currently broken,
resulting in the following error message
qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with
error -12
Add a null check for the revision to ensure it returns an error only in
failure case (null pointer).
Fixes: e694d2b5c58b ("soc: qcom: Add check devm_kasprintf() returned value")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SoC IDs for Qualcomm SAR1130P and SAR2130P platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241018-sar2130p-socinfo-v1-2-b1e97ea963fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SoC Info support for the QCS615 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20241022-add_initial_support_for_qcs615-v4-4-0a551c6dd342@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix warnings like:
smem.c:504: warning: No description found for return value of 'qcom_smem_alloc'
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241021-topic-smem_kerneldoc-v1-1-4825904a7e25@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The QCM6490 is a variant of SC7280, with the usual set of protection
domains, and hence the need for a PD-mapper. In particular USB Type-C
port management and battery management is pmic_glink based.
Add an entry to the kernel, to avoid the need for userspace to provide
this service.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-qcm6490-pd-mapper-v1-1-d6f4bc3bffa3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8cd12678-f44a-4b16-a579-c8f11175ee8c@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM related irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')
On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.
Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240903101510.3452734-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
Linus Torvalds
Arnd Bergmann
Alexey Minnekhanov
Krzysztof Kozlowski
Tudor Ambarus
Saranya R
Geert Uytterhoeven
Luca Weiss
Varadarajan Narayanan
Wasim Nazir
Stephan Gerhold
Bartosz Golaszewski
Konrad Dybcio
Joe Hattori
Manikanta Mylavarapu
Jingyi Wang
Song Xue
Dmitry Baryshkov
Uwe Kleine-König
Tengfei Fan
Nikunj Kela
Zhang Zekun
Bjorn Andersson
Lijuan Gao
Dan Carpenter
Rajendra Nayak