aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/tty/serial/8250/8250_fintek.c (follow)
AgeCommit message (Expand)AuthorFilesLines
2022-08-30serial: Make ->set_termios() old ktermios constIlpo Järvinen1-1/+1
2022-07-08serial: Embed rs485_supported to uart_portIlpo Järvinen1-2/+2
2022-06-27serial: take termios_rwsem for ->rs485_config() & pass termios as paramIlpo Järvinen1-1/+1
2022-06-10serial: 8250_fintek: Remove serial_rs485 sanitizationIlpo Järvinen1-14/+0
2022-06-10serial: 8250_fintek: Fill in rs485_supportedIlpo Järvinen1-0/+15
2022-05-19serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485Ilpo Järvinen1-4/+4
2021-12-15serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)1-20/+0
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
2020-05-29serial: 8250_fintek: Add F81966 SupportJi-Ze Hong (Peter Hong)1-2/+11
2019-03-28serial: 8250_fintek: Make fintek_8250_set_termios staticYueHaibing1-2/+3
2017-11-08serial: 8250_fintek: Fix crash with baud rate B0Ji-Ze Hong (Peter Hong)1-2/+9
2017-11-08serial: 8250_fintek: Disable delays for ports != 0Ricardo Ribalda Delgado1-0/+6
2017-11-08serial: 8250_fintek: Return -EINVAL on invalid configurationRicardo Ribalda Delgado1-8/+9
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman1-5/+0
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
2017-11-04serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()Lukas Wunner1-1/+1
2017-10-20serial: 8250_fintek: Fix finding base_port with activated SuperIOJi-Ze Hong (Peter Hong)1-0/+3
2017-10-03serial: 8250_fintek: fix warning reported from smatchJi-Ze Hong (Peter Hong)1-1/+1
2017-10-03serial: 8250_fintek: UART dynamic clocksource on Fintek F81216HJi-Ze Hong (Peter Hong)1-2/+30
2017-10-03serial: 8250_fintek: UART dynamic clocksource on Fintek F81866Ji-Ze Hong (Peter Hong)1-0/+54
2017-03-17serial: 8250_fintek: Enable high speed mode on Fintek F81866Lukas Redlinger1-5/+38
2016-10-27serial: 8250_fintek: Add F81865 SupportJi-Ze Hong (Peter Hong)1-0/+6
2016-10-27serial: 8250_fintek: Add F81866 SupportJi-Ze Hong (Peter Hong)1-6/+68
2016-10-27serial: 8250_fintek: Add F81216 SupportJi-Ze Hong (Peter Hong)1-2/+24
2016-10-27serial: 8250_fintek: Set maximum FIFO of F81216HJi-Ze Hong (Peter Hong)1-3/+26
2016-10-27serial: 8250_fintek: Set IRQ Mode when port probedJi-Ze Hong (Peter Hong)1-23/+22
2016-10-27serial: 8250_fintek: Refactoring read/write methodJi-Ze Hong (Peter Hong)1-35/+38
2016-08-188250/fintek: rename IRQ_MODE macroArnd Bergmann1-2/+2
2016-06-25serial: 8250_fintek: fix the mismatched IRQ modeJi-Ze Hong (Peter Hong)1-1/+35
2016-04-30serial: 8250: Integrate Fintek into 8250_baseRicardo Ribalda Delgado1-102/+16
2015-07-23serial/8250_fintek: Support for any io address.Ricardo Ribalda Delgado1-24/+27
2015-07-23serial/8250_fintek: Support keys different than defaultRicardo Ribalda Delgado1-16/+23
2015-07-23serial/8250_fintek: Support for chip_ip 0x0501Ricardo Ribalda Delgado1-10/+11
2015-07-23serial/8250_fintek: Support for multiple base_portsRicardo Ribalda Delgado1-35/+52
2015-07-23serial/8250_fintek: Use private data structureRicardo Ribalda Delgado1-17/+31
2015-03-18PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driverPeter Huewe1-12/+1
2014-11-068250/fintek: Use rs485 handler from serial_coreRicardo Ribalda Delgado1-3/+5
2014-09-08serial: Add support for Fintek F81216A LPC to 4 UARTRicardo Ribalda Delgado1-0/+249
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.