aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/usb/host/xhci-mem.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0Kai-Heng Feng1-0/+1
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition time. The 20ms is not enough for some devices. Intead of polling PLS or PLC, we can facilitate the port change event to know that the link transits to U0 is completed. While at it, also separate U0 and U3 case to make the code cleaner. [variable rename to u3exit, and skip completion for usb2 ports -Mathias ] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2Mathias Nyman1-22/+37
xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"Greg Kroah-Hartman1-36/+22
This reverts commit fc57313d1017dd6b6f37a94e88daa8df54368ecc. Marek reports that it breaks things: This patch landed in today's linux-next (20200211) and causes NULL pointer dereference during second suspend/resume cycle on Samsung Exynos5422-based (arm 32bit) Odroid XU3lite board: A more complete fix will be added soon. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fc57313d1017 ("xhci: Fix memory leak when caching protocol extended capability PSI tables") Cc: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Cc: stable <stable@vger.kernel.org> # v4.4+ Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Fix memory leak when caching protocol extended capability PSI tablesMathias Nyman1-22/+36
xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.Mathias Nyman1-3/+9
A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg1-0/+4
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: host: Remove call to memset after dma_alloc_coherentFuqian Huang1-1/+0
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190715032010.7258-1-huangfq.daxian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21usb: xhci: fix build warning - missing prototypeJean-Philippe Menil1-1/+1
Fix build warning when building drivers/usb/host/xhci-mem.o with W=1 due to missing prototype for xhci_free_virt_devices_depth_first. This function is only used in xhci-mem.c so just make it static. Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-4/+4
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-07xhci: move bus_state structure under the xhci_hub structure.Mathias Nyman1-5/+5
Move the bus_state structure under struct usb_hub. We need a bus_state strucure for each roothub to keep track of suspend related info for each port. Instead of keeping an array of two bus_state structures right under struct xhci, it makes more sense move them to the xhci_hub structure. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07xhci: remove the unused sw_lpm_supportZeng Tao1-16/+4
It is introduced for the pre-0.96 xHC controllers, and the driver only support HW LPM for 1.0 and later controllers.It's not actually used now and is thought not to be used in the future any more, so just remove it. Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: xhci: fix interrupt transfer error happened on MTK platformsChunfeng Yun1-0/+4
The MTK xHCI controller use some reserved bytes in endpoint context for bandwidth scheduling, so need keep them in xhci_endpoint_copy(); The issue is introduced by: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") It resets endpoints and will drop bandwidth scheduling parameters used by interrupt or isochronous endpoints on MTK xHCI controller. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06xhci: xhci-mem: off by one in xhci_stream_id_to_ring()Dan Carpenter1-1/+1
The > should be >= here so that we don't read one element beyond the end of the ep->stream_info->stream_rings[] array. Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25xhci: Fix kernel oops in trace_xhci_free_virt_deviceZhengjun Xing1-2/+2
commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook1-2/+2
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-01usb: xhci: force all memory allocations to nodeAdam Wallis1-19/+38
The xhci driver forces DMA memory to be node aware, however, there are several ring-related memory allocations that are not memory node aware. This patch resolves those *alloc functions to be allocated on the proper memory node. Signed-off-by: Adam Wallis <awallis@codeaurora.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-mem: remove port_arrays and the code initializing themMathias Nyman1-89/+11
As we are now using the new port strtuctes the port_arrays are no longer needed, remove them completely Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Create new structures to store xhci port informationMathias Nyman1-1/+57
Current way of having one array telling only the port speed, and then two separate arrays with mmio addresses for usb2 and usb3 ports requeres helper functions to transate hw to hcd, and hcd to hw port numbers, and is hard to expand. Instead create a structure describing a port, including the mmio address, the port hardware index, hcd port index, and a pointer to the roothub it belongs to. Create one array containing all port structures in the same order the hardware controller sees them. Then add an array of port pointers to each xhci hub structure pointing to the ports that belonging to the roothub. This way we can easily convert hw indexed port events to usb core hcd port numbers, and vice versa usb core hub hcd port numbers to hw index and mmio address. Other benefit is that we can easily find the parent hcd and xhci structure of a port structure. This is useful in debugfs where we can give one port structure pointer as parameter and get both the correct mmio address and xhci lock needed to set some port parameter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-16xhci: zero usb device slot_id member when disabling and freeing a xhci slotMathias Nyman1-0/+2
set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-04USB: host: Use zeroing memory allocator rather than allocator/memsetHimanshu Jha1-5/+2
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18Merge 4.15-rc4 into usb-nextGreg Kroah-Hartman1-4/+18
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08xhci: Don't add a virt_dev to the devs array before it's fully allocatedMathias Nyman1-4/+11
Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usb: xhci: Cleanup printk debug message for registersLu Baolu1-4/+0
The content of each register has been exposed through debugfs. There is no need to dump register content with printk in code lines. Remove them to make code more concise and readable. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usb: xhci: Make some static functions globalLu Baolu1-39/+55
This patch makes some static functions global to avoid duplications in different files. These functions can be used in the implementation of xHCI debug capability. There is no functional change. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08xhci: remove unnecessary boolean parameter from xhci_alloc_commandMathias Nyman1-15/+2
commands with input contexts are allocated with the xhci_alloc_command_with_ctx helper. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08xhci: add helper to allocate command with input contextMathias Nyman1-2/+22
Add a xhci_alloc_command_with_ctx() helper to get rid of one of the boolean parameters telling if a context should be allocated with the command. No functional changes, improves core readability Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01usb: xhci: fix panic in xhci_free_virt_devices_depth_firstYu Chen1-0/+7
Check vdev->real_port 0 to avoid panic [ 9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108 [ 9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570 [ 9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8 [ 9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0 [ 9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8 [ 9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70 [ 9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108 [ 9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40 [ 9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120 [ 9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210 [ 9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0 [ 9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488 [ 9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8 [ 9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490 [ 9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0 [ 9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100 [ 9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50 The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4. Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first") Cc: Guenter Roeck <groeck@google.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fan Ning <fanning4@hisilicon.com> Signed-off-by: Li Rui <lirui39@hisilicon.com> Signed-off-by: yangdi <yangdi10@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: host: xhci: Remove redundant license textGreg Kroah-Hartman1-13/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01usb: host: xhci-mem: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17xhci: Convert timers to use timer_setup()Kees Cook1-2/+2
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05usb: xhci: Add debugfs interface for xHCI driverLu Baolu1-3/+2
This adds debugfs consumer for xHCI driver. The debugfs entries read all host registers, device/endpoint contexts, command ring, event ring and various endpoint rings. With these entries, users can check the registers and memory spaces used by a host during run time, or save all the information with a simple 'cp -r' for post-mortem programs. The file hierarchy looks like this. [root of debugfs] |__usb |____[e,u,o]hci <---------[root for other HCIs] |____xhci <---------------[root for xHCI] |______0000:00:14.0 <--------------[xHCI host name] |________reg-cap <--------[capability registers] |________reg-op <-------[operational registers] |________reg-runtime <-----------[runtime registers] |________reg-ext-#cap_name <----[extended capability regs] |________command-ring <-------[root for command ring] |__________cycle <------------------[ring cycle] |__________dequeue <--------[ring dequeue pointer] |__________enqueue <--------[ring enqueue pointer] |__________trbs <-------------------[ring trbs] |________event-ring <---------[root for event ring] |__________cycle <------------------[ring cycle] |__________dequeue <--------[ring dequeue pointer] |__________enqueue <--------[ring enqueue pointer] |__________trbs <-------------------[ring trbs] |________devices <------------[root for devices] |__________#slot_id <-----------[root for a device] |____________name <-----------------[device name] |____________slot-context <----------------[slot context] |____________ep-context <-----------[endpoint contexts] |____________ep#ep_index <--------[root for an endpoint] |______________cycle <------------------[ring cycle] |______________dequeue <--------[ring dequeue pointer] |______________enqueue <--------[ring enqueue pointer] |______________trbs <-------------------[ring trbs] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20Merge 4.12-rc6 into usb-nextGreg Kroah-Hartman1-2/+5
We want the USB fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15xhci: remove endpoint ring cacheMathias Nyman1-75/+6
Anurag Kumar Vulisha reported several issues with xhci endpoint ring caching. 31 Rings are cached per device before a ring is freed. These cached rings are not used as default if a new ring is needed. They are only used if the driver fails to allocate memory for a ring. The current ring cache is more a reason to why we run out memory than a help when we actually do so. Anurag Kumar Vulisha tried to use cached rings as a first option and found new issues with cached ring initialization. Cached rings were first zeroed and then manually reinitialized with link trbs etc, but forgetting to set some important bits like cycle toggle bit. Remove the ring cache completely as it's a faulty premature optimization eating memory Reported-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Tested-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12usb: xhci: Fix USB 3.1 supported protocol parsingYD Tseng1-2/+5
xHCI host controllers can have both USB 3.1 and 3.0 extended speed protocol lists. If the USB3.1 speed is parsed first and 3.0 second then the minor revision supported will be overwritten by the 3.0 speeds and the USB3 roothub will only show support for USB 3.0 speeds. This was the case with a xhci controller with the supported protocol capability listed below. In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub is set as 0x10. And then USB 3.0 is parsed. However, the min_rev of usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind this host controller, the speed of USB 3.1 device just reports 5G speed using lsusb. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00 //USB 3.1 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00 //USB 3.0 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00 //USB 2.0 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This patch fixes the issue by only owerwriting the minor revision if it is higher than the existing one. [reword commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: YD Tseng <yd_tseng@asmedia.com.tw> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18xhci: remove GFP_DMA flag from allocationMatthias Lange1-1/+1
There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. CC: <stable@vger.kernel.org> Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: host: xhci-mem: allocate zeroed Scratchpad BufferPeter Chen1-1/+1
According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17USB: host: xhci: use max-port defineJohan Hovold1-3/+4
Use the new define for the maximum number of SuperSpeed ports instead of a constant when allocating xHCI root hubs. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-19usb: host: xhci: print correct command ring addressPeter Chen1-1/+1
Print correct command ring address using 'val_64'. Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-19usb: host: xhci: delete sp_dma_buffers for scratchpadPeter Chen1-14/+4
We already have sp_array to store each scratch buffer address for xHC, it doesn't need another sp_dma_buffers array to store it. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-19usb: host: xhci: using correct specification chapter reference for DCBAAPPeter Chen1-1/+1
Using correct specification chapter reference for DCBAAP (Device Context Base Address Array Pointer). Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: bInterval quirk for TI TUSB73x0Roger Quadros1-0/+11
As per [1] issue #4, "The periodic EP scheduler always tries to schedule the EPs that have large intervals (interval equal to or greater than 128 microframes) into different microframes. So it maintains an internal counter and increments for each large interval EP added. When the counter is greater than 128, the scheduler rejects the new EP. So when the hub re-enumerated 128 times, it triggers this condition." This results in Bandwidth error when devices with periodic endpoints (ISO/INT) having bInterval > 7 are plugged and unplugged several times on a TUSB73x0 XHCI host. Workaround this issue by limiting the bInterval to 7 (i.e. interval to 6) for High-speed or faster periodic endpoints. [1] - http://www.ti.com/lit/er/sllz076/sllz076.pdf Cc: stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: remove enq_updates and deq_updates from ringLu Baolu1-3/+0
enq_updates and deq_updates were introduced in the first place to check whether an xhci hardware is able to respond to trbs enqueued in the ring. We now have trb tracers to trace every single enqueue/dequeue trb. It's time to remove them and the associated debugging code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: remove error messages for failed memory allocationLu Baolu1-1/+0
Omit extra messages for memory allocation failure. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: add xhci_log_ring trace eventsLu Baolu1-0/+4
This patch creates a new event class called xhci_log_ring, and defines the events used for tracing the change of all kinds of rings used by an xhci host. An xHCI ring is basically a memory block shared between software and hardware. By tracing changes of rings, it makes the life easier for debugging hardware or software problems. This info can be used, later, to print, in a human readable way, the life cycle of an xHCI ring using the trace-cmd tool and the appropriate plugin. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: xhci: use bus->sysdev for DMA configurationArnd Bergmann1-6/+6
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. So, set the dma for xhci from sysdev. sysdev is pointing to device that is known to the system firmware or hardware. Cc: Baolin Wang <baolin.wang@linaro.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: simplify how we store TDs in urb private dataMathias Nyman1-4/+1
Instead of storing a zero length array of td pointers, and then allocate memory both for the td pointer array and the td's, just use a zero length array of actual td's in urb private data. old: struct urb_priv { struct xhci_td *td[0] } new: struct urb_priv { struct xhci_td td[0] } Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: add xhci_virt_device tracerFelipe Balbi1-0/+7
Let's start tracing at least part of an xhci_virt_device lifetime. We might want to extend this tracepoint class later, but for now it already exposes quite a bit of valuable information. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: convert several if() to a single switch statementFelipe Balbi1-4/+6
when getting endpoint type, a switch statement looks better than a series of if () branches. There are no functional changes with this patch, cleanup only. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: change pre-increments to post-incrementsFelipe Balbi1-4/+4
This is a cleanup patch only, no functional changes. The idea is just to make sure for loops look the same all over the driver. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.