aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/video/fbdev
AgeCommit message (Collapse)AuthorFilesLines
2014-05-09omapdss: panel-tpo-td028ec1: Add module aliasMarek Belisko1-0/+1
Add module alias string to make it working when panel is compiled as module. Without this change panel module is not probed thus display is not working. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09omapdss: panel-tpo-td028ec1: Add DT support.Marek Belisko1-1/+31
Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07video: sh_mobile_lcdcfb depends on meramArnd Bergmann1-0/+1
The sh_mobile_lcdcfb driver calls interfaces provided by the corresponding "meram" helper. This fails if meram is a module but lcdcfb is built-in. To work around it, this uses special Kconfig magic to only allow lcdcfb to be built if a) both are modules, b) meram is built-in, or c) meram is disabled and the helpers stubbed out Changing meram from 'y' to 'm' now forces clcd to be a module as well, which seems to be the desired behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: linux-sh@vger.kernel.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: DSI: set regulator voltage to 1.8VTomi Valkeinen1-0/+10
Set the DSI vdd regulator voltage to the required 1.8V. This is required for the case when the regulator in the DT data defines a range of allowed voltages. In this case it's required to set the voltage, as otherwise enabling the voltage fails. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: HDMI4: set regulator voltage to 1.8VTomi Valkeinen1-0/+10
Set the HDMI vdda regulator voltage to the required 1.8V. This is required for the case when the regulator in the DT data defines a range of allowed voltages. In this case it's required to set the voltage, as otherwise enabling the voltage fails. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: HDMI: lane config supportTomi Valkeinen4-2/+167
Add support to configure the pins used for the HDMI lanes. The order and polarity of the lanes can be defined in the DT data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: connector-hdmi: hpd supportTomi Valkeinen1-1/+24
Add support to handle HPD GPIO in the HDMI connector driver. For the time being, the driver only uses HPD GPIO to report is the cable is connected via detect() calll. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07OMAPDSS: panel-dpi: Add DT supportTomi Valkeinen1-1/+58
Add DT support for panel-dpi. We disable the use of the backlight_gpio as it should be handled via backlight framework with DT boots. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-05-07OMAPDSS: panel-dpi: use gpiod for enable gpioTomi Valkeinen1-13/+19
The new gpiod API supports automatic handling of active-high/active-low with DT. To make it possible to use that when booting with DT, change the panel-dpi's handling of the enable GPIO to use gpiod. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30fbdev: Fix tmiofb driver dependenciesJean Delvare1-1/+1
The tmiofb driver should not depend on MFD_CORE but on MFD_TMIO. Without the tmio_core driver, tmiofb has no platform device to bind to and is thus useless. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: pxa3xx-gcu: use devm_ioremap_resource()Jingoo Han1-4/+2
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: mmpfb: cleanup some static checker warnings in probe()Dan Carpenter1-7/+2
Sparse complains about using zero instead of NULL for pointers. Probably, if we enabled the warning, then GCC would complain about the unused initializers. I've just removed them. Smatch complains that we first check if "fbi" is NULL and then dereference it in the error handling. It turns out that "fbi" can't be NULL so I've removed the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: mmp: Remove references to CPU_PXA988Richard Weinberger3-36/+4
References to the Kconfig symbol CPU_PXA988 were added to the tree in v3.9. But that Kconfig symbol has never been part of the tree. So get rid of these references. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: mmp: Remove references to CPU_MMP3Richard Weinberger2-3/+3
References to the Kconfig symbol CPU_MMP3 were added to the tree since v3.6. But that Kconfig symbol has never been part of the tree. So get rid of these references. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: fbdev: Fix format string mismatch in gbefb.cMasanari Iida1-1/+1
Fix format string mismatch in gbefb_show_memsize(). Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30video: fbdev: Fix format string mismatch in wm8505fb.cMasanari Iida1-1/+1
Fix format string mismatch in contrast_show(). Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-22video: Check EDID for HDMI connectionDavid Ung1-1/+8
Check EDID Vendor Specific Data Block bytes to see if the connection is HDMI and set FB_MISC_HDMI. Signed-off-by: David Ung <davidu@nvidia.com> Signed-off-by: Christopher Freeman <cfreeman@nvidia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-22video: da8xx-fb: Add support for Densitron 84-0023-001TJon Ringle1-0/+14
Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-17fbdev: move fbdev core files to separate directoryTomi Valkeinen22-19/+21
Instead of having fbdev framework core files at the root fbdev directory, mixed with random fbdev device drivers, move the fbdev core files to a separate core directory. This makes it much clearer which of the files are actually part of the fbdev framework, and which are part of device drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17video: move fbdev to drivers/video/fbdevTomi Valkeinen471-0/+302801
The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.