| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to hardware capability, the maximum beacon size is 2048 bytes
minus the size of TLV headers.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The maximum TX path and NSS may differ on a band. For example, one variant
of the MT7992 has 5 TX paths and 4 NSS on the 5 GHz band. To address this,
add orig_antenna_mask to record the maximum NSS and prevent setting an
invalid NSS in mt7996_set_antenna().
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
IEEE 802.11 fragmentation can only be applied to unicast frames.
Therefore, drop fragments with multicast or broadcast RA. This patch
addresses vulnerabilities such as CVE-2020-26145.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set the max AMPDU length in the EHT MAC CAP. Without this patch, the
peer station cannot obtain the correct capability, which prevents
achieving peak throughput on the 2 GHz band.
Fixes: 1816ad9381e0 ("wifi: mt76: mt7996: add max mpdu len capability")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the beamformee SS field for the mt7996, mt7992 and mt7990 chipsets.
For the mt7992, this value shall be set to 0x4, while the others shall
be set to 0x3.
Fixes: 5b20557593d4 ("wifi: mt76: connac: adjust phy capabilities based on band constraints")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The firmware only supports full bandwidth UL MU-MIMO, so remove the
partial bandwidth capability from HE PHY CAP.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The test mode interface allows controlled execution of chip-level
operations such as continuous transmission, reception tests, and
register access, which are essential during bring-up, diagnostics,
and factory testing.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20250505233618.1951021-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add MCU command and its handling needed for testmode support on
MT7925. This enables low-level chip testing features such as
continuous TX/RX..
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20250505233618.1951021-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Modify MCU command sending functions to wait for a response,
ensuring consistent behavior across all commands and improves
reliability by confirming that each command is processed
successfully.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Remove a duplicate call to `mt76_mcu_send_msg` to fix redundant operations
in the sniffer command handling.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add a check to ensure only one scan command is active at a time
by testing the MT76_HW_SCANNING state.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7915_mmio_wed_init().
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250407061900.85317-1-bsdhenrymartin@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7996_mmio_wed_init()
Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250407032349.83360-1-bsdhenrymartin@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enhance the mt7925 to include RNR scan support. It adds
the necessary RNR information to the scan command.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250321013829.3598-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt76_connac_mcu_build_rnr_scan_param routine for handling
RNR scan. This is a preliminary patch to enable RNR scan in mt7921 and
mt7925 driver.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250321013829.3598-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202504011739.HvUKtUUe-lkp@intel.com/
Fixes: 3ba20af886d1 ("wifi: mt76: scan: set vif offchannel link for scanning/roc")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Link: https://patch.msgid.link/20250402062415.25434-1-jiangfeng@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-22
this is a pull request of 4 patches for net/main.
The first 3 patches are by Axel Forsman and fix a ISR race condition
in the kvaser_pciefd driver.
The last patch is by Carlos Sanchez and fixes the reception of short
error messages in the slcan driver.
* tag 'linux-can-fixes-for-6.15-20250521' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: slcan: allow reception of short error messages
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
====================
Link: https://patch.msgid.link/20250522082344.490913-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Priority flow control is not supported for LBK and SDP vf. This patch
adds support to not add dcbnl_ops for LBK and SDP vf.
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Having adjacent accelerated modify header actions (so-called
pattern-argument actions) may result in inconsistent outcome.
These inconsistencies can take the form of writes to the same
field or a read coupled with a write to the same field. The
solution is to detect such dependencies and insert nops between
the offending actions.
The existing implementation had a few issues, which pretty much
required a complete rewrite of the code that handles these
dependencies.
In the new implementation we're doing the following:
* Checking any two adjacent actions for conflicts (not just
odd-even pairs).
* Marking 'set' and 'add' action fields as destination, rather
than source, for the purposes of checking for conflicts.
* Checking all types of actions ('add', 'set', 'copy') for
dependencies.
* Managing offsets of the args in the buffer - copy the action
args to the right place in the buffer.
* Checking that after inserting nops we're still within the number
of supported actions - return an error otherwise.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo - rename 'nope_locations' to 'nop_locations', which describes
the locations of 'nop' actions. To shorten the lines, this renaming
also required some refactoring.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware steering handles actions differently from firmware, but for
termination rules that use encapsulation the firmware needs to be aware
of the action.
Fix this by registering reformat actions with the firmware the first
time this is needed. To do this, add a third possible owner for an
action, and also a lock to protect against registration of the same
action from different threads.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The firmware reformat id is a u32 and can't safely be returned as an
int. Because the functions also need a way to signal error, prefer to
return the id as an output parameter and keep the return code only for
success/error.
While we're at it, also extract some duplicate code to fetch the
reformat id from a more generic struct pkt_reformat.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enic started using netif_get_num_default_rss_queues() to set the number
of RQs used in commit cc94d6c4d40c ("enic: Adjust used MSI-X
wq/rq/cq/interrupt resources in a more robust way")
This resulted in machines with less than 16 cpus using less than 8 RQs.
Allow enic to use at least 8 RQs no matter how many cpus are in the
machine to not impact existing enic workloads after a kernel upgrade.
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521-enic_min_8rq-v1-1-691bd2353273@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is [1/3] part of hinic3 Ethernet driver initial submission.
With this patch hinic3 is a valid kernel module but non-functional
driver.
The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table.
Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs.
tx/rx logic.
All major data structures of the driver are fully introduced with the
code that uses them but without their initialization code that requires
management interface with the hw.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Co-developed-by: Gur Stavi <gur.stavi@huawei.com>
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the misspelling of "Electronics" in copyright headers across:
- s3fwrn5 driver
- virtual_ncidev driver
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250520072119.176018-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Logic here always sets hdr->version to 2 if it is not a BE3 or Lancer chip,
even if it is BE2. Use 'else if' to prevent multiple assignments, setting
version 0 for BE2, version 1 for BE3 and Lancer, and version 2 for others.
Fixes potential incorrect version setting when BE2_chip and
BE3_chip/lancer_chip checks could both be true.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250519141731.691136-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull clk fixes from Stephen Boyd:
"Fixes for some SoC clk drivers:
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws'
array to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: s2mps11: initialise clk_hw_onecell_data::num before accessing ::hws[] in probe()
clk: sunxi-ng: fix order of arguments in clock macro
clk: rockchip: rk3576: define clk_otp_phy_g
|
|
Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.
They all support up to 5 LEDs with various HW mode supported.
While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.
For reference here the AS21xxx PHY name logic:
AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID
with new variant for macsec and no_macsec PHYs.
Also make use of PHY_ID_MATCH_MODEL macro and drop PHY_ID_MASK define to
introduce phy_id and phy_id_mask again in phy_driver struct.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a log should be printed as info level, not error level.
Fixes: 9bfd65980f8d ("net: libwx: Add sriov api for wangxun nics")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/67409DB57B87E2F0+20250519063357.21164-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e79 ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use min() instead of min_t() to avoid the possibility of casting to the
wrong type.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250520042031.9297-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations and there also now exists a function
skb_copy_and_crc32c_datagram_iter(), it is unnecessary to go through the
crypto_ahash API. Just use those functions. This is much simpler, and
it also improves performance due to eliminating the crypto API overhead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-10-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Acked-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection
established") introduced a call to ath12k_reg_handle_chan_list() upon
connection to update the regulatory domain in cfg80211 based on the power
type received from the AP.
However, this update fails because ah->regd_updated was already set to true
during the earlier regulatory update triggered when the interface was
added.
To resolve this, reset ah->regd_updated before calling
ath12k_reg_handle_chan_list() to ensure the update proceeds correctly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection established")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-3-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit 4c546023d71a ("wifi: ath12k: update regulatory rules when interface
added"), introduced a call to ath12k_reg_handle_chan_list() during
interface addition to update the regulatory domain based on the interface
type. While this works initially, subsequent updates (e.g., after an
interface delete/re-add cycle) fail because ah->regd_updated is never
reset.
To address this, reset ah->regd_updated before calling
ath12k_reg_handle_chan_list() to allow the update to proceed.
However, this change exposes another issue: a timeout occurs when waiting
for the 11D scan to complete, as seen in the log:
ath12k_pci 0000:05:00.0: failed to receive 11d scan complete: timed out
This happens because during interface down, ar->state_11d is set to
ATH12K_11D_PREPARING, and during interface up, the host waits for
ar->completed_11d_scan even though the scan hasn't started yet.
Fix this by updating the wait condition to check for ATH12K_11D_RUNNING,
which is the only state where a scan complete event is expected.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-2-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In the current implementation of ath12k_regd_update(), the ah->regd_updated
flag is used to ensure that the regulatory domain is updated only once per
radio. During MAC registration, this function is called to push the default
regulatory domain to cfg80211. At that point, the hardware state is not on
and hence ah->regd_updated remains false.
However, after commit 4c546023d71a ("wifi: ath12k: update regulatory rules
when interface added"), ath12k_reg_handle_chan_list() is invoked when an
interface is added, which in turn calls ath12k_regd_update(). By this time,
hardware state is on and consecutively ah->regd_updated becomes true.
Later, when the 11D scan completes and a new regulatory domain is received
from the firmware, the host attempts to update cfg80211 again via
ath12k_regd_update(). But since ah->regd_updated is already true, the
update is skipped.
>From the user's perspective, this results in a failure to connect to 6 GHz
APs, as the default regulatory domain (the only one pushed to cfg80211)
does not include 6 GHz support.
To resolve this, reset the ah->regd_updated flag when handling the 11D
regulatory domain update.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 591de41d7008 ("wifi: ath12k: add 11d scan offload support")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-1-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add VID 13d3 & PID 3630 for MediaTek MT7925 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3630 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Dumping debug registers on GP1 MSIx and error conditions, such as TX
completion timeout, aiding in understanding the controller's state
during errors. The register dump includes:
- Boot stage
- IPC control
- IPC status
- Mailbox registers
HCI traces:
= Vendor Diagnostic (len 199)
2d 2d 2d 2d 20 44 75 6d 70 20 6f 66 20 64 65 62 ---- Dump of deb
75 67 20 72 65 67 69 73 74 65 72 73 20 2d 2d 2d ug registers ---
62 6f 6f 74 20 73 74 61 67 65 3a 20 30 78 61 30 boot stage: 0xa0
66 61 30 30 34 37 69 70 63 20 73 74 61 74 75 73 fa0047ipc status
3a 20 30 78 30 30 30 30 30 30 30 34 69 70 63 20 : 0x00000004ipc
63 6f 6e 74 72 6f 6c 3a 20 30 78 30 30 30 30 30 control: 0x00000
30 30 30 69 70 63 20 73 6c 65 65 70 20 63 6f 6e 000ipc sleep con
74 72 6f 6c 3a 20 30 78 30 30 30 30 30 30 30 30 trol: 0x00000000
6d 62 6f 78 20 73 74 61 74 75 73 3a 20 30 78 30 mbox status: 0x0
30 30 30 30 30 30 30 72 78 71 3a 20 63 72 5f 74 0000000rxq: cr_t
69 61 3a 20 37 20 63 72 5f 68 69 61 3a 20 37 74 ia: 7 cr_hia: 7t
78 71 3a 20 63 72 5f 74 69 61 3a 20 36 20 63 72 xq: cr_tia: 6 cr
5f 68 69 61 3a 20 36 _hia: 6
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit b16b327edb4d030fb4c8fe38c7d299074d47ee3f.
The sysfs node introduced by this patch could potentially race with user
space. The original motivation - Support configuring altsetting from the
user space will be added by another series.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit 75ddcd5ad40ecd9fbc9f5a7a2ed0e1e74921db3c.
This patch doesn't work quite well - It's observed that with this patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds "Supported Altsettings" and "Switch Altsetting" commands
that allow the user space program to configure the altsetting freely.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3, and TRANS alt6) could pass the stress HFP test narrow
band speech and wide band speech.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
Peter Chiu
Benjamin Lin
Howard Hsu
Michael Lo
Ming Yen Hsieh
Henry Martin
Feng Jiang
Paolo Abeni
Geetha sowjanya
Subbaraya Sundeep
Suman Ghosh
Yevgeny Kliteynik
Vlad Dogaru
Eric Dumazet
Nelson Escobar
Fan Gong
Sumanth Gavini
Alok Tiwari
Linus Torvalds
Christian Marangi
Jiawen Wu
Jijie Shao
Justin Lai
Eric Biggers
Baochen Qiang
Jiande Lu
Chandrashekar Devegowda
Hsin-chen Chuang