aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-06-23bnxt_en: Read VPD info only for PFsVasundhara Volam1-1/+2
Virtual functions does not have VPD information. This patch modifies calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary error log. Fixes: a0d0fd70fed5 ("bnxt_en: Read partno and serialno of the board from VPD") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Fix statistics counters issue during ifdown with older firmware.Michael Chan1-1/+7
On older firmware, the hardware statistics are not cleared when the driver frees the hardware stats contexts during ifdown. The driver expects these stats to be cleared and saves a copy before freeing the stats contexts. During the next ifup, the driver will likely allocate the same hardware stats contexts and this will cause a big increase in the counters as the old counters are added back to the saved counters. We fix it by making an additional firmware call to clear the counters before freeing the hw stats contexts when the firmware is the older 20.x firmware. Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Reported-by: Jakub Kicinski <kicinski@fb.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Jakub Kicinski <kicinski@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Do not enable legacy TX push on older firmware.Michael Chan2-1/+3
Older firmware may not support legacy TX push properly and may not be disabling it. So we check certain firmware versions that may have this problem and disable legacy TX push unconditionally. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Store the running firmware version code.Michael Chan2-4/+22
We currently only store the firmware version as a string for ethtool and devlink info. Store it also as a version code. The next 2 patches will need to check the firmware major version to determine some workarounds. We also use the 16-bit firmware version fields if the firmware is newer and provides the 16-bit fields. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4vf: update kernel-doc line commentsRahul Lakkireddy3-11/+8
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4be754 ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d91464da ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a9cc4 ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb6407 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: update kernel-doc line commentsRahul Lakkireddy8-30/+38
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: l2t.c:616: warning: Cannot understand * @dev: net_device pointer t4_hw.c:3175: warning: Function parameter or member 'adap' not described in 't4_get_exprom_version' t4_hw.c:3175: warning: Excess function parameter 'adapter' description in 't4_get_exprom_version' Fixes: 56d36be4dd5f ("cxgb4: Add HW and FW support code") Fixes: fd3a47900b6f ("cxgb4: Add packet queues and packet DMA code") Fixes: 26f7cbc0a5a4 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: 793dad94e745 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: ba3f8cd55f2a ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: ddc7740d9a7c ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 193c4c2845f7 ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 8f46d46715a1 ("cxgb4: Use Firmware params to get buffer-group map") Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 5ccf9d049615 ("cxgb4: update API for TP indirect register access") Fixes: 3bdb376e6944 ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Fixes: 9d5fd927d20b ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: 98f3697f8d41 ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix set but unused variable when DCB is disabledRahul Lakkireddy1-3/+3
Remove the set but unused variable when DCB is disabled. Instead, do the calculation directly inline. Fixes following warning in make W=1: cxgb4_main.c: In function 'cfg_queues': cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used [-Wunused-but-set-variable] u32 i, n10g = 0, qidx = 0, n1g = 0; ^ Fixes: 116ca924aea6 ("cxgb4: fix checks for max queues to allocate") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move DCB version extern to header fileRahul Lakkireddy2-1/+3
Move the DCB version string array extern to header file. Fixes following sparse warning: cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Fixes: ebddd97afb89 ("cxgb4: add support to display DCB info") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: remove cast when saving IPv4 partial checksumRahul Lakkireddy1-2/+1
The checksum field in IPv4 header is in __sum16 and ip_fast_csum() also returns __sum16. So, no need to cast it to u16. Fixes following sparse warning: sge.c:1539:47: warning: cast from restricted __sum16 sge.c:1539:44: warning: incorrect type in assignment (different base types) sge.c:1539:44: expected restricted __sum16 [usertype] check sge.c:1539:44: got unsigned short [usertype] Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix SGE queue dump destination buffer contextRahul Lakkireddy1-2/+4
The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use correct type for all-mask IP address comparisonRahul Lakkireddy1-5/+5
Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix endian conversions for L4 ports in filtersRahul Lakkireddy3-25/+22
The source and destination L4 ports in filter offload need to be in CPU endian. They will finally be converted to Big Endian after all operations are done and before giving them to hardware. The L4 ports for NAT are expected to be passed as a byte stream TCB. So, treat them as such. Fixes following sparse warnings in several places: cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16 cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different base types) cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst Fixes: dca4faeb812f ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: 62488e4b53ae ("cxgb4: add basic tc flower offload support") Fixes: 557ccbf9dfa8 ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: parse TC-U32 key values and masks nativelyRahul Lakkireddy2-49/+91
TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use unaligned conversion for fetching timestampRahul Lakkireddy1-1/+1
Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move PTP lock and unlock to caller in Tx pathRahul Lakkireddy1-12/+11
Check for whether PTP is enabled or not at the caller and perform locking/unlocking at the caller. Fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' - different lock contexts for basic block Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move handling L2T ARP failures to callerRahul Lakkireddy1-28/+24
Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix "maybe uninitialized" warningAlexander Lobakin1-1/+1
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: reset ILT block sizes before recomputing to fix crashesAlexander Lobakin1-0/+19
Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix use-after-free on recovery and AER handlingAlexander Lobakin1-0/+1
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin3-20/+15
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin1-1/+1
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix NVMe login fails over VFsAlexander Lobakin1-5/+18
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin1-1/+2
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix async event callbacks unregisteringAlexander Lobakin3-5/+7
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: device: avoid circular netns referencesJason A. Donenfeld4-45/+55
Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: noise: do not assign initiation time in if conditionFrank Werner-Krippendorf1-2/+2
Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22usbnet: smsc95xx: Fix use-after-free after removalTuomas Tynkkynen1-1/+1
Syzbot reports an use-after-free in workqueue context: BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255 It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active. Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: spectrum: Do not rely on machine endiannessIdo Schimmel4-9/+7
The second commit cited below performed a cast of 'u32 buffsize' to '(u16 *)' when calling mlxsw_sp_port_headroom_8x_adjust(): mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); Colin noted that this will behave differently on big endian architectures compared to little endian architectures. Fix this by following Colin's suggestion and have the function accept and return 'u32' instead of passing the current size by reference. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 60833d54d56c ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Colin Ian King <colin.king@canonical.com> Suggested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22net: phy: smsc: fix printing too many logsDejin Zheng1-4/+7
Commit 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") will print a lot of logs as follows when Ethernet cable is not connected: [ 4.473105] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: lan87xx_read_status failed: -110 When wait 640 ms for check ENERGYON bit, the timeout should not be regarded as an actual error and an error message also should not be printed. due to a hardware bug in LAN87XX device, it leads to unstable detection of plugging in Ethernet cable when LAN87xx is in Energy Detect Power-Down mode. the workaround for it involves, when the link is down, and at each read_status() call: - disable EDPD mode, forcing the PHY out of low-power mode - waiting 640ms to see if we have any energy detected from the media - re-enable entry to EDPD mode This is presumably enough to allow the PHY to notice that a cable is connected, and resume normal operations to negotiate with the partner. The problem is that when no media is detected, the 640ms wait times out and this commit was modified to prints an error message. it is an inappropriate conversion by used phy_read_poll_timeout() to introduce this bug. so fix this issue by use read_poll_timeout() to replace phy_read_poll_timeout(). Fixes: 7ae7ad2f11ef47 ("net: phy: smsc: use phy_read_poll_timeout() to simplify the code") Reported-by: Kevin Groeneveld <kgroeneveld@gmail.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20r8169: fix firmware not resetting tp->ocp_baseHeiner Kallweit1-1/+4
Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma <mapengyu@gmail.com> Tested-by: Aaron Ma <mapengyu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ibmvnic: continue to init in CRQ reset returns H_CLOSEDDany Madden1-2/+7
Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ionic: tame the watchdog timer on reconfigShannon Nelson1-7/+8
Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19ibmveth: Fix max MTU limitThomas Falcon1-1/+1
The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: flow_offload: fix flow_indr_dev_unregister pathwenxu5-11/+11
If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19flow_offload: use flow_indr_block_cb_alloc/remove functionwenxu4-22/+40
Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove function and remove the __flow_block_indr_binding. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19geneve: allow changing DF behavior after creationSabrina Dubroca1-0/+1
Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19enetc: Fix HW_VLAN_CTAG_TX|RX togglingClaudiu Manoil3-16/+34
VLAN tag insertion/extraction offload is correctly activated at probe time but deactivation of this feature (i.e. via ethtool) is broken. Toggling works only for Tx/Rx ring 0 of a PF, and is ignored for the other rings, including the VF rings. To fix this, the existing VLAN offload toggling code was extended to all the rings assigned to a netdevice, instead of the default ring 0 (likely a leftover from the early validation days of this feature). And the code was moved to the common set_features() function to fix toggling for the VF driver too. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: macb: undo operations in case of failureClaudiu Beznea1-2/+4
Undo previously done operation in case macb_phylink_connect() fails. Since macb_reset_hw() is the 1st undo operation the napi_exit label was renamed to reset_hw. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: phy: Check harder for errors in get_phy_id()Florian Fainelli1-2/+4
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19of: of_mdio: Correct loop scanning logicFlorian Fainelli1-2/+7
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: ethernet: oki-semi: pch_gbe: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "Triger" --> "Trigger" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: ethernet: neterion: vxge: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18i40e: fix crash when Rx descriptor count is changedBjörn Töpel1-0/+3
When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18ice: protect ring accesses with WRITE_ONCECiara Loftus2-5/+5
The READ_ONCE macro is used when reading rings prior to accessing the statistics pointer. The corresponding WRITE_ONCE usage when allocating and freeing the rings to ensure protected access was not in place. Introduce this. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus1-10/+19
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18ixgbe: protect ring accesses with READ- and WRITE_ONCECiara Loftus2-9/+17
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18net: dsa: bcm_sf2: Fix node reference countFlorian Fainelli1-0/+2
of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezesDavid Christensen1-2/+2
The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18bareudp: Fixed multiproto mode configurationMartin1-0/+3
Code to handle multiproto configuration is missing. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: let isolation mode override HW offload restrictionsJulian Wiedmann1-2/+4
When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.