aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-06net: ipa: get rid of workaround in ipa_endpoint_stop()Alex Elder1-38/+1
In ipa_endpoint_stop(), a workaround is used for IPA version 3.5.1 where a 1-byte DMA request is issued between GSI channel stop retries. It turns out that this workaround is only required for IPA versions 3.1 and 3.2, and we don't support those. So remove the call to ipa_endpoint_stop_rx_dma() in that function. That leaves that function unused, so get rid of it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: fix a bug in ipa_endpoint_stop()Alex Elder1-5/+2
In ipa_endpoint_stop(), for TX endpoints we set the number of retries to 0. When we break out of the loop, retries being 0 means we return EIO rather than the value of ret (which should be 0). Fix this by using a non-zero retry count for both RX and TX channels, and just break out of the loop after calling gsi_channel_stop() for TX channels. This way only RX channels will retry, and the retry count will be non-zero at the end for TX channels (so the proper value gets returned). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 713b6ebb4c376b3fb65fdceb3b59e401c93248f9) Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: remove endpoint delay mode featureAlex Elder3-10/+1
A "delay mode" feature was put in place to work around a problem that was observed during development of the upstream IPA driver. It used TX endpoint "delay mode" in order to prevent transmitting packets toward the modem before it was ready. A race condition that would explain the problem has long since been fixed, and we have concluded that the "delay mode" feature is no longer required. So get rid of it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: introduce ipa_endpoint_program_suspend()Alex Elder1-26/+41
Create a new helper function that encapsulates enabling or disabling suspend on an RX endpoint. It returns the previous state of the endpoint (true means suspend mode was enabled). Create another function that handles enabling or disabling delay mode on a TX endpoint. Delay mode does not work correctly on IPA version 4.2, so we don't currently use it (and shouldn't). We only set delay mode in one case, and although we don't expect an endpoint to already be in delay mode, it doesn't really matter if it was. So the delay function doesn't return a value. Stop issuing warnings if the previous suspend or delay mode state differs from what is expected. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: have ipa_endpoint_init_ctrl() return previous stateAlex Elder1-14/+14
Change ipa_endpoint_init_ctrl() so it returns the previous state (whether suspend or delay mode was enabled) rather than indicating whether the request caused a change in state. This makes it easier to understand what's happening where called. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: only reset channel twice for IPA v3.5.1Alex Elder1-2/+2
In gsi_channel_reset(), RX channels are subjected to two consecutive CHANNEL_RESET commands. This workaround should only be used for IPA version 3.5.1, and for newer hardware "can lead to unwanted behavior." Only issue the second CHANNEL_RESET command for legacy hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ipa: rename db_enable flagAlex Elder4-21/+21
In several places, a Boolean flag is used in the GSI code to indicate whether the "doorbell engine" should be enabled or not when a channel is configured. This is basically done to abstract this property from the IPA version; the GSI code doesn't otherwise "know" what the IPA hardware version is. The doorbell engine is enabled only for IPA v3.5.1, not for IPA v4.0 and later. The next patch makes another change that affects behavior during channel reset (which also involves programming the channel). It also distinguishes IPA v3.5.1 hardware from newer hardware. Rather than creating another flag whose value matches the "db_enable" value, just rename "db_enable" to be "legacy" so it can be used to signal more than just the special doorbell handling. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06r8169: use fsleep in polling functionsHeiner Kallweit1-64/+44
Use new flexible sleep function fsleep() to merge the udelay and msleep polling functions. We can safely do this because no polling function is used in atomic context in this driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: phy: mscc: use phy_package_sharedMichael Walle2-70/+32
Use the new phy_package_shared common storage to ease the package initialization and to access the global registers. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: phy: bcm54140: use phy_package_sharedMichael Walle1-46/+11
Use the new phy_package_shared common storage to ease the package initialization and to access the global registers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: phy: add concept of shared storage for PHYsMichael Walle2-0/+139
There are packages which contain multiple PHY devices, eg. a quad PHY transceiver. Provide functions to allocate and free shared storage. Usually, a quad PHY contains global registers, which don't belong to any PHY. Provide convenience functions to access these registers. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Revert "crypto: chelsio - Inline single pdu only"Ayush Sawal1-3/+0
This reverts commit 27c6feb0fb33a665a746346e76714826a5be5d10. For ipsec offload the chelsio's ethernet driver expects a single mtu sized packet. But when ipsec traffic is running using iperf, most of the packets in that traffic are gso packets(large sized skbs) because GSO is enabled by default in TCP, due to this commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on"), so chcr_ipsec_offload_ok() receives a gso skb(with gso_size non zero). Due to the check in chcr_ipsec_offload_ok(), this function returns false for most of the packet, then ipsec offload is skipped and the skb goes out taking the coprocessor path which reduces the bandwidth for inline ipsec. If this check is removed then for most of the packets(large sized skbs) the chcr_ipsec_offload_ok() returns true and then as GSO is on, the segmentation of the packet happens in the kernel and then finally the driver_xmit is called, which receives a segmented mtu sized packet which is what the driver expects for ipsec offload. So this case becomes unnecessary here, therefore removing it. Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: 7990: Fix use correct return type for ndo_start_xmit()Yunjian Wang2-2/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: cpmac: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+1
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: moxa: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-2/+3
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: lantiq: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: enetc: Make some symbols staticChenTao1-2/+3
Fix the following warning: drivers/net/ethernet/freescale/enetc/enetc_qos.c:427:20: warning: symbol 'enetc_act_fwd' was not declared. Should it be static? drivers/net/ethernet/freescale/enetc/enetc_qos.c:966:20: warning: symbol 'enetc_check_flow_actions' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: mediatek: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+1
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: socionext: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+1
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: renesas: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: clean up Kconfig help textJulian Wiedmann1-6/+3
Remove a stale doc link. While at it also reword the help text to get rid of an outdated marketing term. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: return error when starting a reset failsJulian Wiedmann3-16/+27
When starting the reset worker via sysfs is unsuccessful, return an error to the user. Modernize the sysfs input parsing while at it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: set TX IRQ marker on last buffer in a groupJulian Wiedmann1-6/+7
When qeth_flush_buffers() gets called for a group of TX buffers (currently up to 2 for OSA-style devices), the code iterates over each buffer for some final processing. During this processing, it sets the TX IRQ marker on the leading buffer rather than the last one. This can result in delayed TX completion of the trailing buffers. So pull the IRQ marker code out of the loop, and apply it to the final buffer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: indicate contiguous TX buffer elementsJulian Wiedmann1-2/+10
The TX path usually maps the full content of a page into a buffer element. But there's specific skb layouts (ie. linearized TSO skbs) where the HW header (1) requires a separate buffer element, and (2) is page-contiguous with the packet data that's mapped into the next buffer element. Flag such buffer elements accordingly, so that HW can optimize its data access for them. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: merge TX skb mapping codeJulian Wiedmann1-37/+27
Merge the __qeth_fill_buffer() helper into its only caller. This way all mapping-related context is in one place, and we can make some more use of it in a subsequent patch. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: don't use restricted offloads for local trafficJulian Wiedmann2-4/+81
Current OSA models don't support TSO for traffic to local next-hops, and some old models didn't offer TX CSO for such packets either. So as part of .ndo_features_check, check if a packet's next-hop resides on the same OSA Adapter. Opt out from affected HW offloads accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: extract helpers for next-hop lookupJulian Wiedmann2-20/+27
These will be used in a subsequent patch. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: add debugfs file for local IP addressesJulian Wiedmann2-1/+33
For debugging purposes, provide read access to the local_addr caches via debug/qeth/<dev_name>/local_addrs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: process local address eventsJulian Wiedmann5-0/+257
In configurations where specific HW offloads are in use, OSA adapters will raise notifications to their virtual devices about the IP addresses that currently reside on the same adapter. Cache these addresses in two RCU-enabled hash tables, and flush the tables once the relevant HW offload(s) get disabled. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: keep track of LP2LP capability for csum offloadJulian Wiedmann2-9/+17
When enabling TX CSO, make a note of whether the device has support for LP2LP offloading. This will become relevant in subsequent patches. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ethernet: mediatek: Make mtk_m32 staticSamuel Zou1-1/+1
Fix the following sparse warning: drivers/net/ethernet/mediatek/mtk_eth_soc.c:68:5: warning: symbol 'mtk_m32' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: mlx4: remove unneeded variable "err" in mlx4_en_get_rxfh()Jason Yan1-2/+1
Fix the following coccicheck warning: drivers/net/ethernet/mellanox/mlx4/en_ethtool.c:1238:5-8: Unneeded variable: "err". Return "0" on line 1252 Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: cortina: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ethernet: ti: Use PTR_ERR_OR_ZERO() to simplify codeSamuel Zou1-4/+1
Fixes coccicheck warning: drivers/net/ethernet/ti/am65-cpts.c:1017:1-3: WARNING: PTR_ERR_OR_ZERO can be used Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: ethernet: ti: am65-cpts: fix buildGrygorii Strashko1-3/+2
It's possible to have build configuration which will force PTP_1588_CLOCK=m and so TI_K3_AM65_CPTS=m while still have TI_K3_AM65_CPSW_NUSS=y. This will cause build failures: aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.o: in function `am65_cpsw_init_cpts': ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685: undefined reference to `am65_cpts_create' aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685:(.text+0x2e20): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `am65_cpts_create' Fix it by adding dependencies from CPTS in TI_K3_AM65_CPSW_NUSS as below: config TI_K3_AM65_CPSW_NUSS ... depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS Note. This will create below dependencies and for NFS boot + CPTS all of them have to be built-in. PTP_1588_CLOCK -> TI_K3_AM65_CPTS -> TI_K3_AM65_CPSW_NUSS While here, clean up TI_K3_AM65_CPTS definition. Fixes: b1f66a5bee07 ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05cxgb4/cxgb4vf: Remove superfluous void * cast in debugfs_create_file() callGeert Uytterhoeven1-1/+1
There is no need to cast a typed pointer to a void pointer when calling a function that accepts the latter. Remove it, as the cast prevents further compiler checks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: ipa: remove duplicated include from ipa_mem.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: sierra_net: Remove unused inline functionYueHaibing1-5/+0
There's no callers in-tree Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05bnx2x: Remove unused inline function bnx2x_vf_vlan_creditYueHaibing1-21/+0
commit 05cc5a39ddb7 ("bnx2x: add vlan filtering offload") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: microchip: Remove unused inline function is_bits_setYueHaibing1-5/+0
There's no callers in-tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05myri10ge: Remove unused inline function myri10ge_vlan_ip_csumYueHaibing1-12/+0
commit 4ca3221fe4b6 ("myri10ge: Convert from LRO to GRO") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: stmmac: Remove unused inline function stmmac_rx_threshold_countYueHaibing1-9/+0
There's no caller in-tree since commit 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: mv643xx_eth: Remove unused inline function sum16_as_beYueHaibing1-5/+0
commit 84411f73b884 ("net: mv643xx_eth: Avoid setting the initial TCP checksum") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: sun: cassini: Remove unused inline functionsYueHaibing1-12/+0
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: tehuti: remove unused inline function bdx_tx_db_sizeYueHaibing1-12/+0
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: ni: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-1/+2
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: ethernet: ti: use true, false for bool variables in cpsw_new.cJason Yan1-2/+2
Fix the following coccicheck warning: drivers/net/ethernet/ti/cpsw_new.c:1924:2-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/ti/cpsw_new.c:1231:1-16: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: bnxt: Remove Comparison to bool in bnxt_ethtool.cJason Yan1-3/+3
Fix the following coccicheck warning: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1991:5-46: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1993:10-54: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2380:5-38: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: agere: use true,false for bool variableJason Yan1-2/+2
Fix the following coccicheck warning: drivers/net/ethernet/agere/et131x.c:717:3-22: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/agere/et131x.c:721:1-20: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05net: atheros: remove conversion to bool in atl1c_start_mac()Jason Yan1-1/+1
No need to convert '==' expression to bool. This fixes the following coccicheck warning: drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1189:63-68: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.