| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There seems to be nothing preventing this driver from being compile
tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260409145618.466701-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states
for devicetree platforms") force enables ASPM on all device tree platforms,
the SG2042 Root Ports are breaking as they advertise L0s and L1
capabilities without supporting them.
Set ASPM quirks to disable the L0s and L1 capabilities for the Root Ports
so that these broken link states won't be enabled.
Fixes: 4e27aca4881a ("riscv: sophgo: dts: add PCIe controllers for SG2042")
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Yao Zi <me@ziyao.cc>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20260405154154.46829-3-me@ziyao.cc
|
|
Add flags for disabling the ASPM L0s/L1 capability for broken Root Ports
by clearing the corresponding bits in Link Capabilities Register through
the local management bus. This allows ASPM to be disabled on platforms
which don't support it.
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20260405154154.46829-2-me@ziyao.cc
|
|
Pull EFI fix from Ard Biesheuvel:
"Fix an incorrect preprocessor conditional that may result in duplicate
instances of sysfb_primary_display on x86"
* tag 'efi-fixes-for-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
firmware: efi: Never declare sysfb_primary_display on x86
|
|
Pull MMC fixes from Ulf Hansson:
- vub300: Fix use-after-free and NULL-deref on disconnect
* tag 'mmc-v7.0-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: vub300: fix use-after-free on disconnect
mmc: vub300: fix NULL-deref on disconnect
|
|
Pull pmdomain fixes from Ulf Hansson:
- imx: Prevent hang at power down for imx8mp-blk-ctrl
- thead: Fix buffer overflow for TH1520 AON driver
- Change Ulf Hansson's email
* tag 'pmdomain-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
MAINTAINERS, mailmap: Change Ulf Hansson's email
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
firmware: thead: Fix buffer overflow and use standard endian macros
|
|
The function opencodes cpumask_print_to_pagebuf() with more generic
bitmap_print_to_pagebuf(). Switch to using the proper API.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Switch the driver to using the proper sysfs_emit("%*pbl") where
appropriate.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
The function calls bitmap_or() immediately followed by bitmap_weight().
Switch to using the dedicated bitmap_weighted_or() and save one bitmap
traverse.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
bitmap_empty() is more verbose and efficient, as it stops traversing
{r,t}xq_ena as soon as the 1st set bit found.
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Use the right helper and save one bitmaps traverse.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
The driver uses hidpp->send_receive_buf to point to a stack-allocated
buffer in the synchronous command path (__do_hidpp_send_message_sync).
However, this pointer is not cleared when the function returns.
If an event is processed (e.g. by a different thread) while the
send_mutex is held by a new command, but before that command has
updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will
observe that the mutex is locked and dereference the stale pointer.
This results in an out-of-bounds access on a different thread's kernel
stack (or a NULL pointer dereference on the very first command).
Fix this by:
1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex
in the synchronous command path.
2. Moving the assignment of the local 'question' and 'answer' pointers
inside the mutex_is_locked() block in the handler, and adding
a NULL check before dereferencing.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch introduces I2C PIO functionality for the Spacemit K1 SoC,
enabling the use of I2C in atomic context.
When i2c xfer_atomic is invoked, use_pio is set accordingly.
Since an atomic context is required, all interrupts are disabled when
operating in PIO mode. Even with interrupts disabled, the bits in the
ISR (Interrupt Status Register) will still be set, so error handling can
be performed by polling the relevant status bits in the ISR.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260207-b4-k3-i2c-pio-v7-2-626942d94d91@linux.spacemit.com
|
|
The upcoming PIO support requires a wait_pio_xfer() helper, which is
invoked from xfer_msg().
Since wait_pio_xfer() depends on err_check(), move the definition of
xfer_msg() after err_check() to avoid a forward declaration of
err_check().
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260207-b4-k3-i2c-pio-v7-1-626942d94d91@linux.spacemit.com
|
|
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind.
Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Cc: stable@vger.kernel.org # 4.19
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Enable rumble motor control on TGRIP-15E and TGRIP-15EX throttle grips
by sending haptic feedback commands (EV_FF events) to the input device.
Signed-off-by: Ivan Gorinov <linux-kernel@altimeter.info>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit d7db259bd6df ("HID: core: factor out hid_parse_collections()")
reworked collection parsing code and inadvertently allowed returning
"success" when parsing 0-sized reports where old code returned -EINVAL.
Restore the original behavior by doing an explicit check.
Note that the error message now differs from the generic "item fetching
failed at offset %u/%u" that is now used only for non-empty descriptors.
Fixes: d7db259bd6df ("HID: core: factor out hid_parse_collections()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When the Huawei CD30 USB keyboard undergoes 500 reboot cycles,
initialization may fail due to a report descriptor problem.
The error log is as follows:
[pid:175,cpu0,kworker/0:1,6]usb 1-1.2.2: new low-speed USB device number 6 using xhci-hcd
[pid:175,cpu0,kworker/0:1,9]usb 1-1.2.2: New USB device found, idVendor=12d1, idProduct=109b, bcdDevice= 1.03
[pid:175,cpu0,kworker/0:1,0]usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[pid:175,cpu0,kworker/0:1,1]usb 1-1.2.2: Product: HUAWEI USB Wired Keyboard
[pid:175,cpu0,kworker/0:1,2]usb 1-1.2.2: Manufacturer: HUAWEI
[pid:175,cpu0,kworker/0:1,4]input: HUAWEI HUAWEI USB Wired Keyboard as /devices/platform/efc00000.hisi_usb/efc00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:12D1:109B.0002/input/input6
[pid:175,cpu0,kworker/0:1,5]hid-generic 0003:12D1:109B.0002: input,hidraw1: USB HID v1.10 Keyboard [HUAWEI HUAWEI USB Wired Keyboard] on usb-xhci-hcd.1.auto-1.2.2/input0
[pid:175,cpu0,kworker/0:1,9]hid-generic 0003:12D1:109B.0003: collection stack underflow
[pid:175,cpu0,kworker/0:1,0]hid-generic 0003:12D1:109B.0003: item 0 0 0 12 parsing failed
[pid:175,cpu0,kworker/0:1,1]hid-generic: probe of 0003:12D1:109B.0003 failed with error -22
...
When encountering such a situation, fix it with the correct report descriptor.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The DualShock 4 HID driver fails to validate the num_touch_reports field
received from the device in both USB and Bluetooth input reports.
A malicious device could set this field to a value larger than the
allocated size of the touch_reports array (3 for USB, 4 for Bluetooth),
leading to an out-of-bounds read in dualshock4_parse_report().
This can result in kernel memory disclosure when processing malicious
HID reports.
Validate num_touch_reports against the array size for the respective
connection types before processing the touch data.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is no reason to build random drivers for obscure hardware into the
core kernel by default.
The usages of 'default !EXPERT' for the HID_PICOLCD suboptions are kept,
as these make some sense, although they probably should use 'default y'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
According to the ASIC design recommendations, the clock must be
disabled before operating the DLL to prevent glitches that could
affect the internal digital logic. In extreme cases, failing to
do so may cause the controller to malfunction completely.
Adds a step to disable the clock before DLL configuration and
re-enables it at the end.
Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for-each loop when iterating over device nodes to simplify the
code, but also to ensure the device node reference is automatically
released when the loop scope ends.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
ioc_count won't be more than MMC_IOC_MAX_CMDS (255), retries won't be more
than MMC_NO_RETRIES (6), flags is newly introduced and uses only 1 bit.
Therefore let's change them all to become u8.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them.
Fixes: dc3c78e434690 ("HID: usbhid: Check HID report descriptor contents after device reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier.
Cc: stable@vger.kernel.org
Fixes: 2075bbe8ef03 ("RDMA/ionic: Register device ops for miscellaneous functionality")
Link: https://patch.msgid.link/r/CALynFi7NAbhDCt1tdaDbf6TnLvAqbaHa6-Wqf6OkzREbA_PAfg@mail.gmail.com
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some users reported that upon suspending their keyboard backlight
remained on. Fix this by adding the missing LED_CORE_SUSPENDRESUME flag.
Cc: stable@vger.kernel.org
Fixes: 394ba612f941 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Fixes: 9018eacbe623 ("HID: apple: Add support for keyboard backlight on certain T2 Macs.")
Reported-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Tested-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech Bolt receiver once connected to a wireless device will
generate data on interface 2. If this data isn't polled, when the USB
port it is connected to gets suspended (and if that happens within 5
minutes of the last input from the wireless device), it will trigger a
remote wakeup 3 seconds later, which will result in a spurious system
wakeup if the port was suspended as part of system sleep.
Set the ALWAYS_POLL quirk for this device to ensure interface 2 is
always polled and this spurious wakeup never happens.
With this change in place the system can be suspended with the receiver
plugged in and the system can be woken up when an input is sent from the
wireless device.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, IPsec and wireless. This is again
considerably bigger than the old average. No known outstanding
regressions.
Current release - regressions:
- net: increase IP_TUNNEL_RECURSION_LIMIT to 5
- eth: ice: fix PTP timestamping broken by SyncE code on E825C
Current release - new code bugs:
- eth: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
Previous releases - regressions:
- core: fix cross-cache free of KFENCE-allocated skb head
- sched: act_csum: validate nested VLAN headers
- rxrpc: fix call removal to use RCU safe deletion
- xfrm:
- wait for RCU readers during policy netns exit
- fix refcount leak in xfrm_migrate_policy_find
- wifi: rt2x00usb: fix devres lifetime
- mptcp: fix slab-use-after-free in __inet_lookup_established
- ipvs: fix NULL deref in ip_vs_add_service error path
- eth:
- airoha: fix memory leak in airoha_qdma_rx_process()
- lan966x: fix use-after-free and leak in lan966x_fdma_reload()
Previous releases - always broken:
- ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group
dump
- bridge: guard local VLAN-0 FDB helpers against NULL vlan group
- xsk: tailroom reservation and MTU validation
- rxrpc:
- fix to request an ack if window is limited
- fix RESPONSE authenticator parser OOB read
- netfilter: nft_ct: fix use-after-free in timeout object destroy
- batman-adv: hold claim backbone gateways by reference
- eth:
- stmmac: fix PTP ref clock for Tegra234
- idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
- ipa: fix GENERIC_CMD register field masks for IPA v5.0+"
* tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (104 commits)
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
net: lan966x: fix page pool leak in error paths
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
nfc: pn533: allocate rx skb before consuming bytes
l2tp: Drop large packets with UDP encap
net: ipa: fix event ring index not programmed for IPA v5.0+
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
MAINTAINERS: Add Prashanth as additional maintainer for amd-xgbe driver
devlink: Fix incorrect skb socket family dumping
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Revert "mptcp: add needs_id for netlink appending addr"
mptcp: fix slab-use-after-free in __inet_lookup_established
net: txgbe: leave space for null terminators on property_entry
net: ioam6: fix OOB and missing lock
rxrpc: proc: size address buffers for %pISpc output
rxrpc: only handle RESPONSE during service challenge
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
rxrpc: Fix integer overflow in rxgk_verify_response()
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
...
|
|
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event.
Fixes: 73196ebe134d ("HID: alps: add support for Alps T4 Touchpad device")
Cc: stable <stable@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Masaki Ota <masaki.ota@jp.alps.com>
Cc: linux-input@vger.kernel.org
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull IOMMU fix from Will Deacon:
- Fix regression introduced by the empty MMU gather fix in -rc7, where
the ->iotlb_sync() callback can be elided incorrectly, resulting in
boot failures (hangs), crashes and potential memory corruption.
* tag 'iommu-fixes-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Ensure .iotlb_sync is called correctly
|
|
logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
assumption to load the associated field's 'value' array with 14 Bytes of
data. However, if a malicious user only sends say 1 Byte of data,
'report_count' will be 1 and only 1 Byte of memory will be allocated to
the 'value' Byte array. When we come to populate 'value[1-13]' we will
experience an OOB write.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since we will need to differentiate between the two report_enum types
soon, let's unify the naming conventions now to save confusion and/or
unnecessary/unrelated changes in upcoming commits.
{input,output}_report_enum is used in other places to let's conform.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
- asus-armoury: Add support for FA607NU, GU605MU, and GV302XU.
- intel-uncore-freq: Handle autonomous UFS status bit
- ISST: Handle cases with less than max buckets correctly
- intel-uncore-freq & ISST: Mark minor version 3 supported (no
additional driver changes required)
* tag 'platform-drivers-x86-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-armoury: add support for GU605MU
platform/x86: asus-armoury: add support for FA607NU
platform/x86: asus-armoury: add support for GV302XU
platform/x86/amd: pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
platform/x86/intel-uncore-freq: Increase minor version
platform/x86: ISST: Increase minor version
platform/x86/intel-uncore-freq: Handle autonomous UFS status bit
platform/x86: ISST: Reset core count to 0
|
|
This commit updates the hid-sony module description to make it correct
with the recent hid-sony changes alongside making it more consistent.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Without this bounds check, this might otherwise overwrite index -1.
Triggering this condition requires action both from the USB device and from
userspace, which reduces the scenarios in which it can be exploited.
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Günther Noack <gnoack@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
dst_fetch_ha() checks nud_state without holding the neighbor lock, then
copies ha under the seqlock. A race in __neigh_update() where nud_state
is set to NUD_REACHABLE before ha is written allows dst_fetch_ha() to
read a zero MAC address while the seqlock reports no concurrent writer.
netevent_callback amplifies this by waking ALL pending addr_req workers
when ANY neighbor becomes NUD_VALID. At scale (N peers resolving ARP
concurrently), the hit probability scales as N^2, making it near-certain
for large RDMA workloads.
N(A): neigh_update(A) W(A): addr_resolve(A)
| [sleep]
| write_lock_bh(&A->lock) |
| A->nud_state = NUD_REACHABLE |
| // A->ha is still 0 |
| [woken by netevent_cb() of
| another neighbour]
| | dst_fetch_ha(A)
| | A->nud_state & NUD_VALID
| | read_seqbegin(&A->ha_lock)
| | snapshot = A->ha /* 0 */
| | read_seqretry(&A->ha_lock)
| | return snapshot
| seqlock(&A->ha_lock)
| A->ha = mac_A /* too late */
| sequnlock(&A->ha_lock)
| write_unlock_bh(&A->lock)
The incorrect/zero mac is read and programmed in the device QP while it
was not yet updated. This causes silent packet loss and eventual
RETRY_EXC_ERR.
Fix by holding the neighbor read lock across the nud_state check and
ha copy in dst_fetch_ha(), ensuring it synchronizes with
__neigh_update() which is updating while holding the write lock.
Cc: stable@vger.kernel.org
Fixes: 92ebb6a0a13a ("IB/cm: Remove now useless rcu_lock in dst_fetch_ha")
Link: https://patch.msgid.link/r/20260405-fix-dmac-race-v1-1-cfa1ec2ce54a@nvidia.com
Signed-off-by: Chen Zhao <chezhao@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
By definition, EFI memory regions of type boot services code or data
have no special significance to the firmware at runtime, only to the OS.
In some cases, the firmware will allocate tables and other assets that
are passed in memory in regions of this type, and leave it up to the OS
to decide whether or not to treat the allocation as special, or simply
consume the contents at boot and recycle the RAM for ordinary use. The
reason for this approach is that it avoids needless memory reservations
for assets that the OS knows nothing about, and therefore doesn't know
how to free either.
This means that any memblock reservations covering such regions can be
marked as MEMBLOCK_RSRV_KERN - this is a better match semantically, and
is useful on x86 to distinguish true reservations from temporary
reservations that are only needed to work around firmware bugs.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
While it is true that each PE/COFF runtime driver in memory can
generally be split into 3 different regions (the header, the code/rodata
region and the data/bss region), each with different permissions, it
does not mean that 3x the size of the memory map is a suitable upper
bound. This is due to the fact that all runtime drivers could be
coalesced into a single EFI runtime code region by the firmware, and if
the firmware does a good job of keeping the fragmentation down, it is
conceivable that the memory attributes table has more entries than the
EFI memory map itself.
So instead, base the sanity check on whether the descriptor size matches
the EFI memory map's descriptor size closely enough (which is not
mandated by the spec but extremely unlikely to differ in practice), and
whether the size of the whole table does not exceed 64k entries.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Implement .alloc_mw() and .dealloc_mw() for mana device.
This is just the basic infrastructure, MW is not practically usable until
additional kernel support for allowing user space to submit MW work
requests is completed.
Link: https://patch.msgid.link/r/20260331090851.2276205-1-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A NS will always have a head pointer, so drop the check. As proof in
practice, all the nvme_mpath_clear_current_path() callers also
dereference ns->head.
This check has endured since the original changes to support multipath.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The firmware for Samsung 970 Evo Plus / PM981 / PM983 does not support SUBNQN.
Make quirks to suppress warnings.
# nvme id-ctrl /dev/nvme1n1
NVME Identify Controller:
vid : 0x144d
ssvid : 0x144d
sn : ***
mn : Samsung SSD 970 EVO Plus 500GB
fr : 2B2QEXM7
mcdqpc : 0
subnqn :
ioccsz : 0
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.
Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver")
Cc: stable@vger.kernel.org
Reported-by: Shivam Kumar <skumar47@syr.edu>
Tested-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE.
Cc: stable@vger.kernel.org
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://patch.msgid.link/r/20260401121907.1468366-1-hkbinbinbin@gmail.com
Signed-off-by: hkbinbin <hkbinbinbin@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
fwnode_property_get_reference_args() now returns -ENOTCONN when called
on a software node referencing another software node which has not yet
been registered as a firmware node. It makes sense to defer probe in this
situation as the node will most likely be registered later on and we'll
be able to resolve the reference eventually. Change the behavior of
swnode_find_gpio() to return -EPROBE_DEFER if the software node reference
resolution returns -ENOTCONN.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260407-swnode-unreg-retcode-v4-2-1b2f0725eb9c@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution.
Fixes: 30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Link: https://patch.msgid.link/r/20260330122742.13315-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Fixes: 89ba464fcf54 ("net: lan966x: refactor buffer reload function")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-4-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-3-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure.
Fixes: 11871aba1974 ("net: lan96x: Use page_pool API")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260405055241.35767-2-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Increase the timeout for vblank events from 100 ms to 1000 ms. This
is the same fix as in commit f050da08a4ed ("drm/vblank: Increase
timeout in drm_wait_one_vblank()") for another vblank timeout.
After merging generic DRM vblank timers [1] and converting several
DRM drivers for virtual hardware, these drivers synchronize their
vblank events to the display refresh rate. This can trigger timeouts
within the DRM framework.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/20250904145806.430568-1-tzimmermann@suse.de/ # [1]
Reported-by: syzbot+fcede535e7eb57cf5b43@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/dri-devel/69381d6c.050a0220.4004e.0017.GAE@google.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 74afeb812850 ("drm/vblank: Add vblank timer")
Link: https://patch.msgid.link/20251209143325.102056-1-tzimmermann@suse.de
|
Johan Hovold
Yao Zi
Linus Torvalds
Yury Norov
Benoît Sevens
Troy Mitchell
Ivan Gorinov
Dmitry Torokhov
Miao Li
Thomas Weißschuh
Shawn Lin
Hans Zhang
Bin Liu
Oliver Neukum
Kai Zen
Aditya Garg
Nícolas F. R. A. Prado
Greg Kroah-Hartman
Lee Jones
Rosalie Wanders
Günther Noack
Chen Zhao
Ard Biesheuvel
Konstantin Taranov
John Garry
Alan Cui
Chaitanya Kulkarni
hkbinbin
Bartosz Golaszewski
Florian Westphal
David Carlier
Thomas Zimmermann