| Age | Commit message (Collapse) | Author | Files | Lines |
|
SC7280 and SC8180X previously shared the same cfg because they did not use
swing/pre-emphasis tables. Add the corresponding tables for these
platforms. Since they have different PHY sub-versions, their eDP/DP mode
tables also differ, so move SC8180X to its own cfg instead of reusing the
SC7280 one.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-3-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The eDP PHY supports both eDP/DP modes, each requiring a different
swing/pre-emphasis table. However, the driver currently uses a fixed
static table for eDP programming rather than selecting the appropriate
table based on the current mode. Add separate tables for eDP and DP
modes, and select the appropriate table dynamically based on the
current mode.
Glymur's DP mode table differs from the other platforms, add a
dedicated table for it.
This also fixes the table mismatch for X1E80100 (eDP) and SA8775P (DP).
Cc: stable@vger.kernel.org
Fixes: 3f12bf16213c ("phy: qcom: edp: Add support for eDP PHY on SA8775P")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-2-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current eDP and DP swing/pre-emphasis tables do not match the HPG
requirements for the supported platforms, correct the table accordingly.
The generic tables which can be shared as follows:
DP modeļ¼
-sa8775p/sc7280/sc8280xp/x1e80100
-glymur
-sc8180x
eDP mode(low vdiff):
-glymur/sa8775p/sc8280xp/x1e80100
-sc7280
-sc8180x
The proper tables for SC8180X and SC7280 will be added in a later patch,
since they need separate table.
Cc: stable@vger.kernel.org
Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-edp_phy-v5-1-3bb876824475@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Sashiko points out that hns_roce_qp_remove() requires the caller to hold
locks. The error flow in hns_roce_create_qp_common() doesn't hold those
locks for the error unwind so it risks corrupting memory.
Grab the same locks the other two callers use.
Cc: stable@vger.kernel.org
Fixes: e088a685eae9 ("RDMA/hns: Support rq record doorbell for the user space")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=9
Link: https://patch.msgid.link/r/15-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Similar to the SRQ case the hr_qp is stored in the xarray before it is
fully initialized. Unlike the SRQ case the error unwinds do not wait for
the completion so keep the refcount 0 until the function succeeds.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://patch.msgid.link/r/14-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Suggested-by: Junxian Huang <huangjunxian6@hisilicon.com>
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that once the srq memory is stored into the xarray by
alloc_srqc() it can immediately be looked up by:
xa_lock(&srq_table->xa);
srq = xa_load(&srq_table->xa, srqn & (hr_dev->caps.num_srqs - 1));
if (srq)
refcount_inc(&srq->refcount);
xa_unlock(&srq_table->xa);
Which will fail refcount debug because the refcount is 0 and then crash:
srq->event(srq, event_type);
Because event is NULL.
Use refcount_inc_not_zero() instead to ensure a partially prepared srq is
never retrieved from the event handler and fix the ordering of the
initialization so refcount becomes 1 only after it is fully ready.
All the initialization must be done before calling free_srqc() since it
depends on the completion and refcount.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=3
Link: https://patch.msgid.link/r/13-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized.
Cc: stable@vger.kernel.org
Fixes: 30353bfc43a1 ("net/mlx4_core: Use RCU to perform radix tree lookup for SRQ")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=5
Link: https://patch.msgid.link/r/12-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free().
Cc: stable@vger.kernel.org
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=8
Link: https://patch.msgid.link/r/11-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that pvrdma_uar_free() is already called within
pvrdma_dealloc_ucontext(), so calling it before triggers a double free.
Cc: stable@vger.kernel.org
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4
Link: https://patch.msgid.link/r/10-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL.
Cc: stable@vger.kernel.org
Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4
Link: https://patch.msgid.link/r/9-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The intention of this code is to find matching entries exactly, the driver
never creates phys_addr's with different lens so the current expression is
not a bug, but it doesn't make sense and confuses review tooling.
Search for exact match instead.
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4
Link: https://patch.msgid.link/r/8-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up.
Cc: stable@vger.kernel.org
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4
Link: https://patch.msgid.link/r/7-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out there are two bugs here in the error unwind flow, both
related to how the WQ table is unwound.
First there is a double i-- on the first failure path due to the while loop
having a i--, remove it.
Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not
undone due to the above i--.
Cc: stable@vger.kernel.org
Fixes: c15d7802a424 ("RDMA/mana_ib: Add CQ interrupt support for RAW QP")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=1
Link: https://patch.msgid.link/r/6-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that the user can specify WQs sharing the same CQ as a
part of the uAPI and this will trigger the WARN_ON() then go on to corrupt
the kernel.
Just reject it outright and fail the QP creation.
Cc: stable@vger.kernel.org
Fixes: c15d7802a424 ("RDMA/mana_ib: Add CQ interrupt support for RAW QP")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=1
Link: https://patch.msgid.link/r/5-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow.
Cc: stable@vger.kernel.org
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=1
Link: https://patch.msgid.link/r/4-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
mlx5 has a common pattern implementing a device-global singleton resource
where it checks the resource pointer for !NULL and then skips obtaining
the lock.
This is not ordered properly as observing !NULL doesn't mean that all the
data under that pointer is also visible on this CPU when the lock is not
taken.
Use a release/acquire pairing to explicitly manage this.
Pointed out by sashiko, Codex found more cases.
Fixes: 5895e70f2e6e ("IB/mlx5: Allocate resources just before first QP/SRQ is created")
Fixes: 638420115cc4 ("IB/mlx5: Create UMR QP just before first reg_mr occurs")
Link: https://sashiko.dev/#/patchset/SYBPR01MB7881E1E0970268BD69C0BA75AF2B2%40SYBPR01MB7881.ausprd01.prod.outlook.com
Link: https://patch.msgid.link/r/3-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Assisted-by: Codex:GPT-5.5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko points out the check for inlen==0 got missed, the ={} was not
redundant, put it back.
Fixes: a9cd442a5347 ("RDMA: Remove redundant = {} for udata req structs")
Link: https://patch.msgid.link/r/2-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Applying the corrupted patch by hand mangled the format string, put the s
in the right place.
Cc: stable@vger.kernel.org
Fixes: 654a27f25530 ("RDMA/ionic: bound node_desc sysfs read with %.64s")
Link: https://patch.msgid.link/r/1-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
XGBE_PTP_ACT_CLK_FREQ and XGBE_V2_PTP_ACT_CLK_FREQ were 10x too
large (500MHz/1GHz instead of 50MHz/100MHz), causing the computed
addend to overflow the 32-bit tstamp_addend. In the general case
this would result in the clock advancing at the wrong rate. For v2
(PCI), ptpclk_rate is hardcoded to 125MHz, so the addend formula
(ACT_CLK_FREQ << 32) / ptpclk_rate yields exactly 8 * 2^32, and
when stored to the 32-bit tstamp_addend the value is zero. With
addend = 0 the hardware accumulator never overflows and the PTP
clock is fully stopped. For v1 (platform), ptpclk_rate is read from
ACPI/DT so the exact overflow behavior depends on the
firmware-reported frequency.
Define the constants as NSEC_PER_SEC / SSINC so the relationship is
explicit and cannot drift out of sync.
Fixes: fbd47be098b5 ("amd-xgbe: add hardware PTP timestamping support")
Tested-by: Gregory Fuchedgi <gfuchedgi@gmail.com>
Signed-off-by: Gregory Fuchedgi <gfuchedgi@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-fix-xgbe-ptp-addend-v1-1-fca5b0ca5e62@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver is used in a non tdm mode priv->utdm is a NULL pointer.
Therefore we need to check this pointer first before checking si_regs.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmapping of uf_regs is done from ucc_fast_free and doesn't need to be
done explicitly. If already unmapped ucc_fast_free will crash.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Apple Silicon Macs expose two CDC NCM "private" data interfaces over
USB-C with VID:PID 0x05ac:0x1905 and product string "Mac". This is the
same protocol Apple already ships on iPhone (0x05ac:0x12a8) and iPad
(0x05ac:0x12ab) for RemoteXPC since iOS 17 -- both data interfaces lack
an interrupt status endpoint, so they rely on the FLAG_LINK_INTR-
conditional bind path introduced in commit 3ec8d7572a69 ("CDC-NCM: add
support for Apple's private interface").
The id_table currently has entries for iPhone and iPad but not for the
Mac. Without a match, cdc_ncm falls through to the generic CDC NCM
class-match entry, which uses the FLAG_LINK_INTR-having cdc_ncm_info
struct, so bind_common() fails on the missing status endpoint and no
netdev appears.
Add id_table entries for both interface numbers (0 and 2) of the Mac,
bound to the existing apple_private_interface_info driver_info.
Verified empirically on a Mac Studio M3 Ultra running macOS 26.5: when
a Mac is connected via USB-C, ioreg shows VID 0x05ac, PID 0x1905,
product string "Mac", with two NCM data interfaces at numbers 0 and 2.
The same PID is presented by all current Apple Silicon Mac models
(MacBook Pro/Air, Mac mini, Mac Studio across the M-series), mirroring
Apple's single-PID-per-family pattern from iPhone/iPad.
After this patch, plugging a Mac into a Linux host running the patched
kernel produces two enx... interfaces (one per data interface),
"ip -br link" lists them as UP, and standard userspace networking
(DHCP, NetworkManager shared mode, etc.) works without any modprobe
overrides or out-of-tree modules.
Signed-off-by: Alex Cheema <alex@exolabs.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429175739.34426-1-alex@exolabs.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes for rc2, the usual amdgpu/xe double header, I think xe had a
couple of weeks combined due to some maintainer access issues,
otherwise there's just a few misc fixes and documentation fixups.
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout"
* tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel: (77 commits)
drm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRROR
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
drm/xe/xelp: Fix Wa_18022495364
drm/xe/gsc: Fix BO leak on error in query_compatibility_version()
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
drm/xe/vf: Use drm mm instead of drm sa for CCS read/write
drm/xe: Add memory pool with shadow support
drm/xe/debugfs: Correct printing of register whitelist ranges
drm/xe: Mark ROW_CHICKEN5 as a masked register
drm/xe/tuning: Use proper register offset for GAMSTLB_CTRL
drm/xe/xe3p_lpg: Add missing indirect ring state feature flag
drm/xe: Drop redundant rtp entries for Wa_14019988906 & Wa_14019877138
drm/xe/vm: Add missing pad and extensions check
drm/xe: Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge()
...
|
|
The TRENDnet TUC-ET2G V2.0 is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260430213435.21821-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
|
|
The UE and UE_NF cases check ce_count against UINT_MAX before incrementing
their respective counters. This is logically incorrect and prevents
ue_count and ue_nf_count from incrementing when ce_count reaches UINT_MAX.
Fixes: c11a50b170e7 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410112015.592546-1-alok.a.tiwari@oracle.com
|
|
Pull s390 fixes from Alexander Gordeev:
- Reject zero-length writes from userspace that corrupt Debug Facility
buffers
- Replace one s390 PCI maintainer
- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally
- Replace incorrect use of phys_to_folio() to virt_to_folio() in
do_secure_storage_access()
* tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix phys_to_folio() usage in do_secure_storage_access()
s390/sclp: Remove SCLP_OFB Kconfig option
MAINTAINERS: Replace one of the maintainers for s390/pci
s390/debug: Reject zero-length input in debug_input_flush_fn()
s390/debug: Reject zero-length input before trimming a newline
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Yu:
- Fix a raid5 UAF on IO across the reshape position
- Avoid failing RAID1/RAID10 devices for invalid IO errors
- Fix RAID10 divide-by-zero when far_copies is zero
- Restore bitmap grow through sysfs
- Use mddev_is_dm() instead of open-coding gendisk checks
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes
- Replace open-coded wait loops with wait_event helpers
- NVMe pull request via Keith:
- Target data transfer size configuation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)
- Properly propagate CDROM read-only state to the block layer
* tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (35 commits)
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
...
|
|
Pull spi fixes from Mark Brown:
"There are a couple of nasty issues fixed here in the axiado and
rockchip drivers. We've also got more of the fixes from Johan here,
this time for the two Cadence drivers, plus a couple of other similar
fixes from John and Felix"
* tag 'spi-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amlogic-spisg: initialize completion before requesting IRQ
spi: axiado: replace usleep_range() with udelay() in IRQ path
spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
spi: cadence-quadspi: fix unclocked access on unbind
spi: cadence-quadspi: fix clock imbalance on probe failure
spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
spi: cadence: fix clock imbalance on probe failure
spi: cadence: fix unclocked access on unbind
spi: rockchip: Drop unused and broken CR0 macros
spi: rockchip: Read ISR, not IMR, to detect cs-inactive IRQ
spi: rzv2h-rspi: Fix silent failure in clock setup error path
|
|
Pull regulator fix from Mark Brown:
"A fix from Arnd re-adding a dependency on gpiolib which was implicitly
pulled in via an OF specific route which got removed as part of a
cleanup"
* tag 'regulator-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rpi-panel-attiny: add back GPIOLIB dependency
|
|
Pull regmap fix from Mark Brown:
"A fix from Colin for a spelling mistake in a dev_warn() message"
* tag 'regmap-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Fix spelling mistake "undeferable" -> "undeferrable"
|
|
When ublk_ch_uring_cmd_cb() runs as fallback task work (e.g., because
the submitting task is exiting), the command should not be issued as
current is a kworker, not the daemon task. This can cause io->task
to capture the wrong task in __ublk_fetch(), leading to a task
mismatch warning in ublk_uring_cmd_cancel_fn().
Check tw.cancel and return -ECANCELED instead of issuing the command
from fallback context.
Fixes: 3421c7f68bba ("ublk: make sure io cmd handled in submitter task context")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260501112312.947327-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
API Fixes:
- Add missing pad and extensions check (Jonathan)
- Reject unsafe PAT indices for CPU cached memory (Jia)
Driver Fixes:
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge (Brost)
- Xe3p tuning and workaround fixes (Roper, Gustavo)
- USE drm mm instead of drm SA for CCS read/write (Satya)
- Fix leaks and null derefs (Shuicheng)
- Fix Wa_18022495364 (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/afO05KvmFMn_7qcY@intel.com
|
|
amd-drm-fixes-7.1-2026-04-30:
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260430135619.3929877-1-alexander.deucher@amd.com
|
|
When cn20k default L2 rules are not installed,
npc_cn20k_dft_rules_idx_get() leaves broadcast, multicast, promiscuous, and
unicast slots at USHRT_MAX. npc_get_nixlf_mcam_index() previously returned
that sentinel as a valid MCAM index, so callers could program hardware with
an invalid index.
Return -EINVAL from the cn20k branches of npc_get_nixlf_mcam_index() when
the requested slot is still USHRT_MAX. Harden cn20k NPC MCAM entry helpers
to reject out-of-range indices before touching hardware.
Drop the early bounds check in npc_enable_mcam_entry() for cn20k so invalid
indices are validated inside npc_cn20k_enable_mcam_entry() instead of being
silently ignored.
In rvu_npc_update_flowkey_alg_idx(), treat negative MCAM indices like
out-of-range values, and only update RSS actions for promiscuous and
all-multi paths when the resolved index is non-negative.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-11-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_dft_rules_free() used the NPC MCAM mbox "free all" path, which
does not match how cn20k tracks default-rule MCAM slots indexes.
Resolve the default-rule indices, then for each valid slot clear the bitmap
entry, drop the PF/VF map, disable the MCAM line, clear the target
function, and npc_cn20k_idx_free(). Remove any matching software mcam_rules
nodes. On hard failure from idx_free, WARN and stop so the box stays up for
analysis.
In npc_mcam_free_all_entries(), prefetch the same default-rule indices and,
on cn20k, skip bitmap clear and idx_free when the scanned entry is one of
those reserved defaults (they are released by npc_cn20k_dft_rules_free).
Fixes: 09d3b7a1403f ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-10-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_dft_rules_idx_get() wrote USHRT_MAX into individual outputs only
on some error paths (lbk promisc lookup, VF ucast lookup, and the PF rule
walk), which could leave other caller slots stale across retries.
Set every non-NULL bcast/mcast/promisc/ucast pointer to USHRT_MAX once at
entry, then drop the duplicate assignments on failure. Successful lookups
still overwrite the relevant slot before returning.
Fixes: 09d3b7a1403f ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-9-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_cn20k_read_mcam_entry() always reloaded action and vtag_action from
bank 0 after programming the CAM words. Use the bank returned by
npc_get_bank() for the ACTION reads as well, and read those registers once
up front so both X2 and X4 paths share the same metadata.
Return directly from the X2 keyword path now that the action fields are
already populated.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-8-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For X4 keys its loop reused the bank parameter as the loop counter, so bank
no longer reflected the caller's bank after the loop and the control flow
was hard to follow.
Program NPC_AF_CN20K_MCAMEX_BANKX_CFG_EXT directly in
npc_cn20k_config_mcam_entry(): one CFG write for X2 using the computed
bank, and one CFG write per bank inside the X4 action loop. Enable the
entry at the end with npc_cn20k_enable_mcam_entry(..., true) instead of
embedding the enable bit in bank_cfg via the removed helper.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 4e527f1e5c15 ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-7-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the old four-argument CN20K MCAM clear with a per-bank static
helper and npc_cn20k_clear_mcam_entry() that takes a logical MCAM index,
resolves the key width via npc_mcam_idx_2_key_type(), and clears either one
bank (X2) or every bank (X4).
Call it from npc_clear_mcam_entry() on cn20k and log when key-type lookup
fails. Use the per-bank helper from npc_cn20k_config_mcam_entry() for
pre-program clears.
For loopback VFs, use the promisc MCAM index as ucast_idx when copying RSS
action for promisc, matching cn20k default-rule layout.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-6-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_defrag_move_vdx_to_free() disables, copies, and enables the MCAM entry
at a new index but previously left entry2target_pffunc[] and the mcam_rules
list still keyed to the old index. Copy the target PF association to the
new slot, clear the old one, and retarget the rule entry so software state
matches the relocated hardware context.
Fixes: 645c6e3c1999 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes on
bank0 then bank1. On failure it rolls back by freeing entries already
placed in save[].
__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid. The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero in
rc and a later __npc_subbank_free() failure could still end with return 0
when the allocation path had also left rc at zero (for example shortfall
after zero return values from the alloc helpers).
Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno. If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation phase.
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 645c6e3c1999 ("octeontx2-af: npc: cn20k: virtual index support")
Link: https://lore.kernel.org/netdev/adjNJEpILRZATB2N@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
debugfs is not intended to be checked for allocation failures the way other
kernel APIs are: callers should not fail probe or subsystem init because a
debugfs node could not be created, including when debugfs is disabled in
Kconfig. Replacing NULL checks with IS_ERR() checks is similarly wrong for
optional debugfs.
Remove dentry checks and -EFAULT returns from npc_cn20k_debugfs_init().
See:
https://staticthinking.wordpress.com/2023/07/24/
debugfs-functions-are-not-supposed-to-be-checked/
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 528530dff56b ("octeontx2-af: npc: cn20k: add debugfs support")
Link: https://lore.kernel.org/netdev/adjNGPWKMOk3KgWL@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
npc_mcam_idx_2_key_type() can fail; callers used to ignore it and still
used kw_type when enabling, configuring, copying, and reading MCAM entries.
That could program or decode hardware with an undefined key type.
Return -EINVAL when key-type lookup fails. Return -EINVAL from
npc_cn20k_copy_mcam_entry() when src and dest key types differ instead of
failing silently.
Change npc_cn20k_{enable,config,copy,read}_mcam_entry() to return int on
success or error. Thread those errors through the cn20k MCAM write and read
mbox handlers, the cn20k baseline steer read path, NPC defrag move
(disable/copy/enable with dev_err and -EFAULT), and the DMAC update path in
rvu_npc_fs.c.
Make npc_copy_mcam_entry() return int so the cn20k branch can return
npc_cn20k_copy_mcam_entry() without a void/int mismatch, and fail
NPC_MCAM_SHIFT_ENTRY when copy fails.
Cc: Suman Ghosh <sumang@marvell.com>
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 6d1e70282f76 ("octeontx2-af: npc: cn20k: Use common APIs")
Link: https://lore.kernel.org/netdev/adiQJvuKlEhq2ILx@stanley.mountain/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-2-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several fixes from Johan for issues with unbind and error handling in
probe.
|
|
Several fixes from Johan for probe failure and unbind issues in the
cadence-quadspi driver.
|
|
In order to respect the original descriptor order and avoid any
potential IOMMU fault or memory corruption, move pending queue entries
to the head of hw queue tx_list if the DMA mapping of current inflight
packet fails in airoha_dev_xmit routine.
Fixes: 3f47e67dff1f7 ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260429-airoha-xmit-unmap-error-path-v2-1-32e43b7c6d25@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d569c
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag.
Fixes: eb4898fde1de ("net: libwx: add wangxun vf common api")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/786DDC7D5CCA6D0A+20260429083743.88961-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn).
Fixes: a04ea57aae37 ("net: libwx: fix device bus LAN ID")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/4D1F4452D21DE107+20260429083743.88961-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull mtd fixes from Miquel Raynal:
"Besides an out-of-bound bug, this is about properly supporting Winbond
octal SPI NAND chips which use a specific pattern for stuffing more
address bits in some operations. This uses the spi-mem flag in SPI
NAND that was added to the spi-mem layer just before the merge window
through the spi tree"
* tag 'mtd/fixes-for-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: winbond: Fix ODTR write VCR on W35NxxJW
mtd: spinand: winbond: Set the packed page read flag to W35N02/04JW
mtd: spinand: Add support for packed read data ODTR commands
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
|