| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
display_get_pci_dev_of() gets a referenced PCI device via
pci_get_device(). Drop that reference when pci_enable_device() fails and
release it during the managed teardown path after pci_disable_device().
Without that, ofdrm leaks the pci_dev reference on both the error path
and the normal cleanup path.
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420002513.216-1-dbgh9129@gmail.com
|
|
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check().
Fixes: 4c3dbb2c312c ("drm: Add GEM backed framebuffer library")
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420013637.457751-1-ashutoshdesai993@gmail.com
|
|
Store SMT register cache per bank instead of using a single array.
On RZ/V2H(P), RZ/V2N, and RZ/G3E, the SMT register is split across two
32-bit registers: bits 0/8/16/24 control pins 0-3, while pins 4-7 are
controlled by the corresponding bits in the next register. The previous
implementation cached only a single SMT register, leading to incomplete
save/restore of SMT state.
Convert cache->smt to a per-bank array and allocate storage for both
halves. Update suspend/resume handling to save and restore both SMT
registers when present.
Fixes: 837afa592c623 ("pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260413182456.811543-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
When saving/restoring pull-up/down register state during suspend/resume,
the second PUPD register access was incorrectly using the same base offset
as the first, effectively reading/writing the same register twice instead
of the adjacent one.
Add the correct + 4 byte offset to the second RZG2L_PCTRL_REG_ACCESS32
call so that pupd[1][port] is properly saved and restored from the next
32-bit register in the PUPD register pair, covering pins 4–7 of ports
with 4 or more pins.
Fixes: b2bd65fbb617 ("pinctrl: renesas: rzg2l: Add suspend/resume support for pull up/down")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260328090548.84124-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The qcom pinctrl core supports marking functions that represent GPIO mode
via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
GPIO requests for pins that are muxed to the GPIO function.
ipq4019 still describes its gpio function with QCA_PIN_FUNCTION(gpio),
so it is not treated as a GPIO pin function. As a result, GPIO consumers
can still conflict with pinctrl states that select the "gpio" function.
Add a QCA_GPIO_PIN_FUNCTION() helper and use it for the ipq4019 gpio
function, matching how the msm-based qcom drivers handle this.
This allows ipq4019 to keep the GPIO-related pin configuration in DTS
without tripping over strict pinmux ownership checks.
Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict")
Signed-off-by: Til Kaiser <mail@tk154.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
If the gpio_chip::get_direction() callback is not implemented by the GPIO
controller driver, GPIOLIB emits a warning.
Implement get_direction() for the GPIO part of pinctrl-moore.
Fixes: 471e998c0e31 ("gpiolib: remove redundant callback check")
Fixes: e623c4303ed1 ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Closes: https://lore.kernel.org/all/20260409132724.126258-1-linux@fw-web.de/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
clang-22 warns about csiphy_match_clock_name() taking a variable format
string that is not checked against the 'int index' argument:
drivers/media/platform/qcom/camss/camss-csiphy.c:566:44: error: diagnostic behavior may be improved by
adding the 'format(printf, 2, 3)' attribute to the declaration of 'csiphy_match_clock_name'
[-Werror,-Wmissing-format-attribute]
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| __attribute__((format(printf, 2, 3)))
562 | int index)
563 | {
564 | char name[16]; /* csiphyXXX_timer\0 */
565 |
566 | snprintf(name, sizeof(name), format, index);
| ^
drivers/media/platform/qcom/camss/camss-csiphy.c:561:13: note: 'csiphy_match_clock_name' declared here
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| ^
Change the function to use a snprintf() style format string that allows this
to be checked at the call site.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing required clocks (cpas_ahb and camnoc_axi) for VFE lite
instances on sa8775p platform. These clocks are necessary for proper
VFE lite operation:
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Fixes: e7b59e1d06fb ("media: qcom: camss: Add support for VFE 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix the mismatch between clock list and clock rate table for CSID lite
instances. The current implementation has 5 clocks defined but only 2
are actually needed (vfe_lite_csid and vfe_lite_cphy_rx), while the
clock rate table doesn't match this configuration.
Update both clock list and rate table to maintain consistency:
- Remove unused clocks: cpas_vfe_lite, vfe_lite_ahb, vfe_lite
- Update clock rate table to match the remaining two clocks
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix BUF_DONE_IRQ_STATUS_RDI_OFFSET calculation for csid lite on
sa8775p platform. The offset should be 0 for csid lite on sa8775p,
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Follow the commit bfe1326573ff ("venus: Fix for H265 decoding failure.")
and increase H265D_MAX_SLICE following firmware requirements on that
platform. Otherwise decoding of the H.265 streams fails with the
"insufficient scratch_1 buffer size" from the firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[bod: Fixed commit log withthe => with the]
Fixes: e1f5d32608ec ("media: iris: Add internal buffer calculation for HEVC and VP9 decoders")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
During concurrency testing, multiple instances can run in parallel, and
each instance uses its own inst->lock while the core->lock protects the
list of active instances. The race happens because these locks cover
different scopes, inst->lock protects only the internals of a single
instance, while the Macro Blocks Per Frame (MBPF) checker walks the
core list under core->lock and reads fields like fmt_src->width and
fmt_src->height. At the same time, iris_close() may free fmt_src and
fmt_dst under inst->lock while the instance is still present in the core
list. This allows a situation where the MBPF checker, still iterating
through the core list, reaches an instance whose fmt_src was already
freed by another thread and ends up dereferencing a dangling pointer,
resulting in a use-after-free. This happens because the MBPF checker
assumes that any instance in the core list is fully valid, but the
freeing of fmt_src and fmt_dst without removing the instance from the
core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after
the instance has been removed from the core list and all teardown under
the core lock has completed, ensuring that no dangling pointers are ever
exposed during MBPF checks.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 5ad964ad5656 ("media: iris: Initialize and deinitialize encoder instance structure")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Currently the driver switches the vcodec GDSC to hardware (HW) mode
before firmware load and boot sequence. GDSC can be powered off, keeping
in hw mode, thereby the vcodec registers programmed in TrustZone (TZ)
carry default (reset) values.
Move the transition to HW mode after firmware load and boot sequence.
The bug was exposed with driver configuring different stream ids to
different devices via iommu-map. With registers carrying reset values,
VPU would not generate desired stream-id, thereby leading to SMMU fault.
For vpu4, when GDSC is switched to HW mode, there is a need to perform
the reset operation. Without reset, there are occasional issues of
register corruption observed. Hence the vpu GDSC switch also involves
the reset.
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: occassional => occasional]
Fixes: dde659d37036 ("media: iris: Introduce vpu ops for vpu4 with necessary hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The core->iface_q_table_vaddr buffer is alloc'd with size queue_size
but freed with sizeof(*q_tbl_hdr) which is different.
Change the dma_free_attrs() size.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: d7378f84e94e ("media: iris: introduce iris core state management with shared queues")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy
internal buffers after FW releases") introduced a regression where
session_release_buf() may free the buffer. The caller,
iris_release_internal_buffers(), continued to access `buffer` after the
call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling
session_release_buf(), and reverting the flag if the call fails. This
ensures no dereference occurs after potential freeing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/lkml/aYXvKAX3Pg3sL37P@stanley.mountain/#r
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Fixes: 1dabf00ee206 ("media: iris: gen1: Destroy internal buffers after FW releases")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_IRIS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/iris/iris_firmware.o: in function `iris_fw_load':
iris_firmware.c:(.text+0xb0): undefined reference to `qcom_mdt_get_size'
iris_firmware.c:(.text+0xfd): undefined reference to `qcom_mdt_load'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: d19b163356b8 ("media: iris: implement video firmware load/unload")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_VENUS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/venus/firmware.o: in function `venus_boot':
firmware.c:(.text+0x1e3): undefined reference to `qcom_mdt_get_size'
firmware.c:(.text+0x25a): undefined reference to `qcom_mdt_load'
firmware.c:(.text+0x272): undefined reference to `qcom_mdt_load_no_init'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM,
same as for the similar IRIS driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 0399b696f7f4 ("media: venus: fix compile-test build on non-qcom ARM platform")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Pull in remaining commits from 7.1/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make sure to balance the runtime PM usage count before returning on
probe failure (to allow the controller to suspend after a probe
deferral) and to only drop the usage count on driver unbind to avoid a
clock disable imbalance.
Also restore the autosuspend setting.
Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
Cc: stable@vger.kernel.org # 6.7
Cc: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix.
Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
Cc: stable@vger.kernel.org # 6.7
Cc: Dhruva Gole <d-gole@ti.com>
Link: https://sashiko.dev/#/patchset/20260414134319.978196-1-johan%40kernel.org?part=2
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the bogus runtime PM get on probe failures that was never needed
and that leaks a usage count reference while preventing the clocks from
being disabled (as runtime PM has not yet been enabled).
Fixes: 1889dd208197 ("spi: cadence-quadspi: Fix clock disable on probe failure path")
Cc: stable@vger.kernel.org # 6.19
Cc: Anurag Dutta <a-dutta@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recent attempt to fix the probe error handling introduced a runtime PM
disable depth imbalance by incorrectly disabling runtime PM on early
failures (e.g. probe deferral).
Fixes: f18c8cfa4f1a ("spi: cadence-qspi: Fix probe error path and remove")
Cc: stable@vger.kernel.org # 7.0
Cc: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that the controller is active before disabling clocks on probe
failure to avoid unbalanced clock disable.
Also drop the usage count before returning (so that the controller can
be suspended after a probe deferral) and restore the autosuspend
setting.
Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Cc: stable@vger.kernel.org # 4.7
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421123615.1533617-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid unclocked register access and unbalanced
clock disable.
Also restore the autosuspend setting.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix.
Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Cc: stable@vger.kernel.org # 4.7
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://sashiko.dev/#/patchset/20260414134319.978196-1-johan%40kernel.org?part=1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421123615.1533617-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Two CTRLR0 macros are defined but never referenced, and both are wrong:
- CR0_XFM_MASK shifts by SPI_XFM_OFFSET, which does not exist anywhere
in the tree. The intended symbol is CR0_XFM_OFFSET.
- CR0_MTM_OFFSET is defined as 0x21, i.e. bit 33 of a 32-bit register.
The value is meaningless and the macro is unused.
Drop both. They can be re-introduced correctly when an actual user
appears.
Signed-off-by: John Madieu <john.madieu@gmail.com>
Link: https://patch.msgid.link/20260425092936.2590132-3-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rockchip_spi_isr() decides whether the current interrupt was the
cs-inactive event by reading IMR:
if (rs->cs_inactive &&
readl_relaxed(rs->regs + ROCKCHIP_SPI_IMR) & INT_CS_INACTIVE)
ctlr->target_abort(ctlr);
IMR is the interrupt mask register: it tells which sources are enabled,
not which one fired. In the PIO path, rockchip_spi_prepare_irq() enables
both INT_RF_FULL and INT_CS_INACTIVE in IMR when rs->cs_inactive is true:
if (rs->cs_inactive)
writel_relaxed(INT_RF_FULL | INT_CS_INACTIVE,
rs->regs + ROCKCHIP_SPI_IMR);
so the IMR check is always true once cs_inactive is enabled, and every
PIO interrupt - including normal RF_FULL completions - is dispatched to
ctlr->target_abort(), aborting the transfer. The bug is reachable on
ROCKCHIP_SPI_VER2_TYPE2 in target mode with a DMA-capable controller
when the transfer is short enough to fall back to PIO
(rockchip_spi_can_dma() returns false below fifo_len).
Read ISR (which is RISR masked by IMR) so the check actually reflects
which interrupt fired, and parenthesise the expression for clarity while
at it.
Fixes: 869f2c94db92 ("spi: rockchip: Stop spi slave dma receiver when cs inactive")
Signed-off-by: John Madieu <john.madieu@gmail.com>
Link: https://patch.msgid.link/20260425092936.2590132-2-john.madieu@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260424112425.32129-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rzv2h_rspi_setup_clock() is declared to return u32 but returns -EINVAL
when no valid clock parameters are found. Cast to u32, -EINVAL becomes
0xffffffea, which is a non-zero value. The caller in
rzv2h_rspi_prepare_message() guards against failure with:
rspi->freq = rzv2h_rspi_setup_clock(rspi, speed_hz);
if (!rspi->freq)
return -EINVAL;
Because 0xffffffea is non-zero, the check is bypassed and the controller
proceeds to program SPBR/SPCMD with stale values, leading to an unknown
bit rate.
Return 0 on the failed-search path, consistent with the existing
clk_set_rate() failure path which already returns 0.
Fixes: 77d931584dd3 ("spi: rzv2h-rspi: make transfer clock rate finding chip-specific")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20260425024725.2393632-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
|
|
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
|
|
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
|
|
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
|
|
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736af6 ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull fbdev fixes from Helge Deller:
- request memory region before use (cobalt_lcdfb, clps711x-fb, hgafb)
- reference cleanups in failure path (offb, savage)
- a spelling fix (atyfb)
* tag 'fbdev-for-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: hgafb: Request memory region before ioremap
fbdev: clps711x-fb: Request memory region for MMIO
fbdev: cobalt_lcdfb: Request memory region
fbdev: atyfb: Fix spelling mistake "enfore" -> "enforce"
fbdev: savage: fix probe-path EDID cleanup leaks
fbdev: offb: fix PCI device reference leak on probe failure
|
|
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
|
|
Pull ceph updates from Ilya Dryomov:
"We have a series from Alex which extends CephFS client metrics with
support for per-subvolume data I/O performance and latency tracking
(metadata operations aren't included) and a good variety of fixes and
cleanups across RBD and CephFS"
* tag 'ceph-for-7.1-rc1' of https://github.com/ceph/ceph-client:
ceph: add subvolume metrics collection and reporting
ceph: parse subvolume_id from InodeStat v9 and store in inode
ceph: handle InodeStat v8 versioned field in reply parsing
libceph: Fix slab-out-of-bounds access in auth message processing
rbd: fix null-ptr-deref when device_add_disk() fails
crush: cleanup in crush_do_rule() method
ceph: clear s_cap_reconnect when ceph_pagelist_encode_32() fails
ceph: only d_add() negative dentries when they are unhashed
libceph: update outdated comment in ceph_sock_write_space()
libceph: Remove obsolete session key alignment logic
ceph: fix num_ops off-by-one when crypto allocation fails
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
|
|
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
|
|
Pull spi fixes from Mark Brown:
"This is quite a big set of fixes, almost all from Johan Hovold who is
on an ongoing quest to clean up issues with probe and removal handling
in drivers.
There isn't anything too concerning here especially with the
deregistration stuff which will very rarely get run in production
systems since this is all platform devices in the SoC on embedded
hardware, but it's all real issues which should be fixed. There's more
in flight here.
We also have a few other minor fixes, one from Felix Gu along the same
lines as Johan's work and a couple of documentation things"
* tag 'spi-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (23 commits)
spi: fix controller cleanup() documentation
spi: fix resource leaks on device setup failure
spi: axiado: clean up probe return value
spi: axiado: rename probe error labels
spi: axiado: fix runtime pm imbalance on probe failure
spi: orion: clean up probe return value
spi: orion: fix clock imbalance on registration failure
spi: orion: fix runtime pm leak on unbind
spi: imx: fix runtime pm leak on probe deferral
spi: mpc52xx: fix use-after-free on registration failure
spi: Fix the error description in the `ptp_sts_word_post` comment
spi: topcliff-pch: fix use-after-free on unbind
spi: topcliff-pch: fix controller deregistration
spi: orion: fix controller deregistration
spi: mxic: fix controller deregistration
spi: mpc52xx: fix use-after-free on unbind
spi: mpc52xx: fix controller deregistration
spi: cadence-quadspi: fix controller deregistration
spi: cadence: fix controller deregistration
spi: mtk-snfi: fix memory leak in probe
...
|
|
Pull regulator fix from Mark Brown:
"Just one trivial cleanup of the user visible prompts in Kconfig here,
standardising how we describe Qualcomm"
* tag 'regulator-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom: Unify user-visible "Qualcomm" name
|
|
Pull regmap fixes from Mark Brown:
"There's couple of patches here that came in since my pull request:
- What is effectively a quirk for shoehorning support for a wider
range of I2C regmaps on weirdly restricted SMBus controllers
- One minor fix for a memory leak on in error handling in the dummy
driver used by the KUnit tests"
* tag 'regmap-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: ram: fix memory leaks in __regmap_init_ram() on error
regmap-i2c: add SMBus byte/word reg16 bus for adapters lacking I2C_FUNC_I2C
|
|
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in gpio-rockchip introduced on older chips during
the merge window when converting to dynamic GPIO base
- fix AST2700 debounce selector bit definitions in gpio-aspeed
* tag 'gpio-fixes-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: fix AST2700 debounce selector bit definitions
gpio: rockchip: Fix GPIO regression after conversion to dynamic base allocation
|
|
Pull sound fixes from Takashi Iwai:
"Here are the rest of small updates for 7.1-rc1. All small fixes mostly
for device-specific issues or regressions.
Core:
- Fix a potential data race in fasync handling
USB-audio:
- New device support: Line6 POD HD PRO, NexiGo N930W webcam
- Fixes for Audio Advantage Micro II SPDIF switch and E-MU sample
rates
- Limit UAC2 rate parsing to prevent potential overflows
HD-Audio:
- Device-specific quirks for HP, Acer, and Honor laptops
- Fix for TAS2781 SPI device abnormal sound
- Move Intel firmware loading into probe work to avoid stalling
ASoC:
- New support for TI TAS5832
- Fixes for SoundWire SDCA/DisCo boolean parsing
- Driver-specific fixes for Intel SOF, ES8311, RT1320, and PXA2xx
Misc:
- Fixes for resource leaks and data races in 6fire, caiaq, als4000,
and pcmtest drivers"
* tag 'sound-fix-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
Revert "ALSA: pcmtest: fix reference leak on failed device registration"
ASoC: tas2781: Add tas5832 support
ASoC: dt-bindings: ti,tas2781: Add TAS5832 support
ALSA: usb-audio: Fix Audio Advantage Micro II SPDIF switch
ALSA: usb-audio: Avoid false E-MU sample-rate notifications
ASoC: sdw_utils: cs42l43: allow spk component names to be combined
ASoC: qcom: x1e80100: limit speaker volumes
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa2xxx
ALSA: pcmtest: Fix resource leaks in module init error paths
ALSA: usb-audio/line6: Add support for POD HD PRO
ALSA: hda/realtek: Add LED fixup for HP EliteBook 6 G2a Laptops
ASoC: SDCA: Fix reading of mipi-sdca-control-deferrable
regmap: sdw-mbq: Allow defers on undeferrable controls
Revert "ALSA: usb-audio: Add quirk for SmartlinkTechnology M01"
ALSA: als4000: Fix capture trigger chip->mode race
ALSA: core: Fix potential data race at fasync handling
ALSA: hda/tas2781: Fix sound abnormal issue on some SPI device
ALSA: hda/realtek: add quirk for Acer Nitro 16 AN16-41
ALSA: caiaq: Fix control_put() result and cache rollback
ALSA: pcmtest: fix reference leak on failed device registration
...
|
|
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
|
|
Pull drm next fixes from Dave Airlie:
"This is the first of two fixes for the merge PRs, the other is based
on 7.0 branch. This mostly AMD fixes, a couple of weeks of backlog
built up and this weeks. The main complaint I've seen is some boot
warnings around the FP code handling which this should fix. Otherwise
a single rcar-du and a single i915 fix.
amdgpu:
- SMU 14 fixes
- Partition fixes
- SMUIO 15.x fix
- SR-IOV fixes
- JPEG fix
- PSP 15.x fix
- NBIF fix
- Devcoredump fixes
- DPC fix
- RAS fixes
- Aldebaran smu fix
- IP discovery fix
- SDMA 7.1 fix
- Runtime pm fix
- MES 12.1 fix
- DML2 fixes
- DCN 4.2 fixes
- YCbCr fixes
- Freesync fixes
- ISM fixes
- Overlay cursor fix
- DC FP fixes
- UserQ locking fixes
- DC idle state manager fix
- ASPM fix
- GPUVM SVM fix
- DCE 6 fix
amdkfd:
- Fix memory clear handling
- num_of_nodes bounds check fix
i915:
- Fix uninitialized variable in the alignment loop [psr]
rcar-du:
- fix NULL-ptr crash"
* tag 'drm-next-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel: (75 commits)
drm/amdkfd: Add upper bound check for num_of_nodes
drm: rcar-du: Fix crash when no CMM is available
drm/amd/display: Disable 10-bit truncation and dithering on DCE 6.x
drm/amdgpu: OR init_pte_flags into invalid leaf PTE updates
drm/amd: Adjust ASPM support quirk to cover more Intel hosts
drm/amd/display: Undo accidental fix revert in amdgpu_dm_ism.c
drm/i915/psr: Init variable to avoid early exit from et alignment loop
drm/amdgpu: drop userq fence driver refs out of fence process()
drm/amdgpu/userq: unpin and unref doorbell and wptr outside mutex
drm/amdgpu/userq: use pm_runtime_resume_and_get and fix err handling
drm/amdgpu/userq: unmap_helper dont return the queue state
drm/amdgpu/userq: unmap is to be called before freeing doorbell/wptr bo
drm/amdgpu/userq: hold root bo lock in caller of input_va_validate
drm/amdgpu/userq: caller to take reserv lock for vas_list_cleanup
drm/amdgpu/userq: create_mqd does not need userq_mutex
drm/amdgpu/userq: dont lock root bo with userq_mutex held
drm/amdgpu/userq: fix kerneldoc for amdgpu_userq_ensure_ev_fence
drm/amdgpu/userq: clean the VA mapping list for failed queue creation
drm/amdgpu/userq: avoid uneccessary locking in amdgpu_userq_create
drm/amd/display: Fix ISM teardown crash from NULL dc dereference
...
|
|
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
|
|
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
|
|
Don't map or unmap svm range to gpu if vm is not ready for updates.
Why: DRM entity may already be killed when the svm worker try to
update gpu vm.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 55f8e366c326980174a4f2b9501b524d8eb25135)
|
|
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
Reviewed-by: Amir Shetaia <Amir.Shetaia@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f)
Cc: stable@vger.kernel.org
|
|
GFX V11 has GC block as default off IP.
Every time AMDGPU driver sends a request to PMFW
to unload MP1, PMFW will put GC in reset and
power down the voltage.Hence, skipping reset
for APUs with GFX V11 or later to avoid reset
related failures.
Fixes: 34355e61835e ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0a8cadffc818f51d05bc234d8da1af228bc59a3)
Cc: stable@vger.kernel.org
|
|
According to our documentation, the RMA should only occur when the
threshold has been exceeded, not met.
Fixes: 5028a24aa89a ("drm/amdgpu: Send applicable RMA CPERs at end of RAS init")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8bc09a7d0e90ec45a0b4865661cf45cbbce1c3d7)
|
Yuho Choi
Ashutosh Desai
Lad Prabhakar
Biju Das
Til Kaiser
Bartosz Golaszewski
Arnd Bergmann
Wenmeng Liu
Dmitry Baryshkov
Vishnu Reddy
Vikash Garodia
Thomas Fourier
Dikshita Agarwal
Martin K. Petersen
Johan Hovold
John Madieu
Colin Ian King
John Madieu
Linus Torvalds
Maíra Canal
YuanShang
Alysa Liu
Shubhankar Milind Sardeshpande
Kent Russell