| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add bond0 type bond mode 0
# ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
# ip netns exec ns1 ip link set bond_slave_1 master bond0
# ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set bond_slave_1 nomaster
# ip netns del ns1
The logical analysis of the problem is as follows:
1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
vlan_vid_add()
vlan_info_alloc()
__vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1
2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
vlan_vid_add()
__vlan_vid_add()
vlan_add_rx_filter_info()
if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
return 0;
if (netif_device_present(dev))
return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
// The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.
3. detach bond_slave_1 from bond0:
__bond_release_one()
vlan_vids_del_by_dev()
list_for_each_entry(vid_info, &vlan_info->vid_list, list)
vlan_vid_del(dev, vid_info->proto, vid_info->vid);
// bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
// bond_slave_1->vlan_info will be assigned NULL.
4. delete vlan10 during delete ns1:
default_device_exit_batch()
dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!
Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.
This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.
Change goto name "errout" to "err_out" to maintain consistency across
goto statements.
Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.
It appears all of these updates can happen from multiple cpus.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.
Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.
The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.
We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".
Allocate a single dummy page and use it as fallback.
Found by code inspection, and proven by forcing allocation
failures.
Fixes: e7b159a48ba6 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.
Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().
That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_join 'implicit EP' test currently fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
Error: too many addresses or duplicate one: -22.
ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '
This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
times in iproute output, and does not account for a final whitespace
in it.
This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_join 'delete and re-add' test fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
002 delete and re-add before delete[ ok ]
mptcp_info subflows=1 [ ok ]
Error: argument "ADDRESS" is wrong: invalid for non-zero id address
after delete[fail] got 2:2 subflows expected 1
This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:
"When used with the delete id operation, an IFADDR is only included when
the ID is 0."
This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.
Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.
Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.
On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Another syzbot report [1] is about tp->status lockless reads
from __packet_get_status()
[1]
BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status
write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0:
__packet_set_status+0x78/0xa0 net/packet/af_packet.c:407
tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483
deliver_skb net/core/dev.c:2173 [inline]
__netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337
__netif_receive_skb_one_core net/core/dev.c:5491 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650
sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645
smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1:
__packet_get_status net/packet/af_packet.c:436 [inline]
packet_lookup_frame net/packet/af_packet.c:524 [inline]
__tpacket_has_room net/packet/af_packet.c:1255 [inline]
__packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298
tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285
deliver_skb net/core/dev.c:2173 [inline]
dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243
xmit_one net/core/dev.c:3574 [inline]
dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594
__dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
can_send+0x4eb/0x5d0 net/can/af_can.c:276
bcm_can_tx+0x314/0x410 net/can/bcm.c:302
bcm_tx_timeout_handler+0xdb/0x260
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749
hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0000000000000000 -> 0x0000000020000081
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:
$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down
This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.
Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Coccicheck reports the error below:
net/mptcp/protocol.c:3330:15-28: ERROR: test of a variable/field address
Since the address of msk->cb_flags is used in __test_and_clear_bit, the
address should not be NULL. The judgment for if (unlikely(msk->cb_flags))
will always be true, we should check the real value of msk->cb_flags here.
Fixes: 65a569b03ca8 ("mptcp: optimize release_cb for the common case")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803072438.1847500-1-xiangyang3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the AR8032 part does not support wol, remove related callbacks
from it.
Fixes: 5800091a2061 ("net: phy: at803x: add support for AR8032 PHY")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Cc: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it
seems not correct to use a wol_en bit in a 1588 Control Register which is
only available on AR8031/AR8033(share the same phy_id) to determine if WoL
is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also update
the at803x_set_wol() function to only update the 1588 register on chips
having it. After this change, disabling wol at probe from commit
d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
needed. Change it to just disable the WoL bit in 1588 register for
AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe.
Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When booting a kernel with CONFIG_MISDN_DSP=y and CONFIG_CFI_CLANG=y,
there is a failure when dsp_cmx_send() is called indirectly from
call_timer_fn():
[ 0.371412] CFI failure at call_timer_fn+0x2f/0x150 (target: dsp_cmx_send+0x0/0x530; expected type: 0x92ada1e9)
The function pointer prototype that call_timer_fn() expects is
void (*fn)(struct timer_list *)
whereas dsp_cmx_send() has a parameter type of 'void *', which causes
the control flow integrity checks to fail because the parameter types do
not match.
Change dsp_cmx_send()'s parameter type to be 'struct timer_list' to
match the expected prototype. The argument is unused anyways, so this
has no functional change, aside from avoiding the CFI failure.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308020936.58787e6c-oliver.sang@intel.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: e313ac12eb13 ("mISDN: Convert timers to use timer_setup()")
Link: https://lore.kernel.org/r/20230802-fix-dsp_cmx_send-cfi-failure-v1-1-2f2e79b0178d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Willem and Jason have agreed to take over the maintainer
duties for TUN/TAP, thank you!
There's an existing entry for TUN/TAP which only covers
the user mode Linux implementation.
Since we haven't heard from Maxim on the list for almost
a decade, extend that entry and take it over, rather than
adding a new one.
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We forgot to add vsock_perf to the rm command in the `clean`
target, so now we have a left over after `make clean` in
tools/testing/vsock.
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Cc: AVKrasnov@sberdevices.ru
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().
We need to acquire fastopen_seqlock to maintain consistency.
For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.
Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_net can be read or written locklessly.
Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().
Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_vals[] values can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_lock can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tm->tcpm_stamp can be read or written locklessly.
Add needed READ_ONCE()/WRITE_ONCE() to document this.
Also constify tcpm_check_stamp() dst argument.
Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.
tcp_metrics use a common hash table, where entries can have different
families.
We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.
Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:
[ 76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
[ 76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
[ 76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
...
Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.
This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").
With this fix applied:
[ 88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
[ 88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
[ 88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2
Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit. Something like:
pipe(pfd);
sfd = socket(AF_INET, SOCK_DGRAM, 0);
connect(sfd, ...);
send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
write(pfd[1], buffer, 8);
splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);
where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).
The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.
This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:
copy = datalen - transhdrlen - fraggap - pagedlen;
then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:
length -= copy + transhdrlen;
to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.
Fix this by:
(1) Insert a note about the dodgy calculation of 'copy'.
(2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
equation, so that 'offset' isn't regressed and 'length' isn't
increased, which will mean that length and thus copy should match the
amount left in the iterator.
(3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
we're asked to splice more than is in the iterator. It might be
better to not give the warning or even just give a 'short' write.
[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator. This is a potential bug for
the future.
Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo in setup_fte_upper_proto_match() where destination UDP port
was used instead of source port.
Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.
As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.
Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.
Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:
memcpy: detected field-spanning write (size 120) of single field
"¶ms_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)
The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.
Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.
Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).
brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.
To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com
|
|
The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.
In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
hash = -912054133
num_nh_buckets = 2
bucket_index = 65535
which leads to the following panic:
BUG: unable to handle page fault for address: ffffc900025910c8
PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
RIP: 0000:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffffc900025910c8
---[ end trace 0000000000000000 ]---
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fix this problem by ensuring the MSB of hash is 0 using a right shift - the
same approach used in fib_multipath_hash() and rt6_multipath_hash().
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
<TASK>
skb_push+0xc4/0xe0
ip6mr_cache_report+0xd69/0x19b0
reg_vif_xmit+0x406/0x690
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
vlan_dev_hard_start_xmit+0x3ab/0x5c0
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
neigh_connected_output+0x3ed/0x570
ip6_finish_output2+0x5b5/0x1950
ip6_finish_output+0x693/0x11c0
ip6_output+0x24b/0x880
NF_HOOK.constprop.0+0xfd/0x530
ndisc_send_skb+0x9db/0x1400
ndisc_send_rs+0x12a/0x6c0
addrconf_dad_completed+0x3c9/0xea0
addrconf_dad_work+0x849/0x1420
process_one_work+0xa22/0x16e0
worker_thread+0x679/0x10c0
ret_from_fork+0x28/0x60
ret_from_fork_asm+0x11/0x20
When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
ip6mr_cache_report()
skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.
Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code
static int dcbnl_bcn_setcfg(...)
{
...
ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
// !!! dcbnl_pfc_up_nest for attributes
// DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
...
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
// !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
...
value_byte = nla_get_u8(data[i]);
...
}
...
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
// !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
...
value_int = nla_get_u32(data[i]);
...
}
...
}
That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".
static const struct nla_policy dcbnl_pfc_up_nest[...] = {
[DCB_PFC_UP_ATTR_0] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_1] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_2] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_3] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_4] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_5] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_6] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_7] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};
static const struct nla_policy dcbnl_bcn_nest[...] = {
[DCB_BCN_ATTR_RP_0] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_1] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_2] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_3] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_4] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_5] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_6] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_7] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG},
// from here is somewhat different
[DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32},
...
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.
Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.
Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing code does not allow the MTU to be set to the maximum even
after an XDP program supporting multiple buffers is attached. Fix it
to set the netdev->max_mtu to the maximum value if the attached XDP
program supports mutiple buffers, regardless of the current MTU value.
Also use a local variable dev instead of repeatedly using bp->dev.
Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RXBD length field on all bnxt chips is 16-bit and so we cannot
support a full page when the native page size is 64K or greater.
The non-XDP (non page pool) code path has logic to handle this but
the XDP page pool code path does not handle this. Add the missing
logic to use page_pool_dev_alloc_frag() to allocate 32K chunks if
the page size is 64K or greater.
Fixes: 9f4b28301ce6 ("bnxt: XDP multibuffer enablement")
Link: https://lore.kernel.org/netdev/20230728231829.235716-2-michael.chan@broadcom.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dan Carpenter reported an error spotted by Smatch.
./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients()
error: uninitialized symbol 'ret'.
The returned value of sched_setaffinity() should be checked with
ASSERT_EQ(), but the value was not saved in a proper variable,
resulting in an error above.
Let's save the returned value of with sched_setaffinity().
Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-kselftest/fe376760-33b6-4fc9-88e8-178e809af1ac@moroto.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230731181553.5392-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device
property on ACPI systems") the SocioNext SynQuacer platform ships with
firmware defining the PHY mode as RGMII even though the physical
configuration of the PHY is for TX and RX delays. Since bbc4d71d63549bc
("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
misconfiguration of the PHY, rendering the network unusable.
This was worked around for ACPI by ignoring the phy-mode property but
the system is also used with DT. For DT instead if we're running on a
SynQuacer force a working PHY mode, as well as the standard EDK2
firmware with DT there are also some of these systems that use u-boot
and might not initialise the PHY if not netbooting. Newer firmware
imagaes for at least EDK2 are available from Linaro so print a warning
when doing this.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in korina_probe(), the return value of clk_prepare_enable()
should be checked since it might fail. we can use
devm_clk_get_optional_enabled() instead of devm_clk_get_optional()
and clk_prepare_enable() to automatically handle the error.
Fixes: e4cd854ec487 ("net: korina: Get mdio input clock via common clock framework")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230731090535.21416-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632
Fixes: 16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.")
Signed-off-by: Ross Maynard <bids.7405@bigpond.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most kernel functions return negative error codes but some irq functions
return zero on error. In this code irq_of_parse_and_map(), returns zero
and platform_get_irq() returns negative error codes. We need to handle
both cases appropriately.
Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adrian Reber reported the following CRIU build bug after
commit b8af5999779d ("s390/ptrace: make all psw related
defines also available for asm"):
compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
523 | if (psw->mask & PSW_MASK_RI) {
| ^~~~~~~~~~~
Add the missing linux/const.h include to fix this.
Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes: b8af5999779d ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The trailing array member of struct tx_buf was defined as a 1-element
array, but used as a flexible array. This was resulting in build warnings:
In function 'fortify_memset_chk',
inlined from 'memset_io' at /kisskb/src/arch/mips/include/asm/io.h:486:2,
inlined from 'build_auth_frame' at /kisskb/src/drivers/net/wireless/legacy/ray_cs.c:2697:2:
/kisskb/src/include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning:
detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace it with an actual flexible array. Binary difference comparison
shows a single change in output:
│ drivers/net/wireless/legacy/ray_cs.c:883
│ lea 0x1c(%rbp),%r13d
│ - cmp $0x7c3,%r13d
│ + cmp $0x7c4,%r13d
This is from:
if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
specifically:
#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))
This appears to have been originally buggy, so the change is correct.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/88f83d73-781d-bdc-126-aa629cb368c@linux-m68k.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230728231245.never.309-kees@kernel.org
|
|
Previously, .kill_sb() will be called only after fill_super fails.
It will be changed [1].
Besides, checking for s_magic in erofs_kill_sb() is unnecessary from
any point of view. Let's get rid of it now.
[1] https://lore.kernel.org/r/20230731-flugbereit-wohnlage-78acdf95ab7e@brauner
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801014737.28614-1-hsiangkao@linux.alibaba.com
|
Jason A. Donenfeld
Ziyang Xuan
Nitya Sunkad
Fedor Pchelkin
Eric Dumazet
Jakub Kicinski
Paolo Abeni
Andrea Claudi
Florian Westphal
Vladimir Oltean
Xiang Yang
Li Yang
Nathan Chancellor
Stefano Garzarella
Jonas Gorski
David Howells
Leon Romanovsky
Jianbo Liu
ndesaulniers@google.com
Hans de Goede
Benjamin Poirier
Yue Haibing
Alexandra Winter
Laszlo Ersek
Lin Ma
Michael Chan
Somnath Kotur
Kuniyuki Iwashima
Mark Brown
Yuanjun Gong
Ross Maynard
Dan Carpenter
Heiko Carstens
Kees Cook
Gao Xiang