| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
uselib hasn't been used since libc5; glibc does not use it. Support
turning it off.
When disabled, also omit the load_elf_library implementation from
binfmt_elf.c, which only uselib invokes.
bloat-o-meter:
add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-785 (-785)
function old new delta
padzero 39 36 -3
uselib_flags 20 - -20
sys_uselib 168 - -168
SyS_uselib 168 - -168
load_elf_library 426 - -426
The new CONFIG_USELIB defaults to `y'.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 6307f8fee295 ("security: remove dead hook task_setgroups"),
set_groups will always return zero, so we could just remove return value
of set_groups.
This patch reduces code size, and simplfies code to use set_groups,
because we don't need to check its return value any more.
[akpm@linux-foundation.org: remove obsolete claims from set_groups() comment]
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sys_sysfs is an obsolete system call no longer supported by libc.
- This patch adds a default CONFIG_SYSFS_SYSCALL=y
- Option can be turned off in expert mode.
- cond_syscall added to kernel/sys_ni.c
[akpm@linux-foundation.org: tweak Kconfig help text]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is plenty of anecdotal evidence and a load of blog posts
suggesting that using "drop_caches" periodically keeps your system
running in "tip top shape". Perhaps adding some kernel documentation
will increase the amount of accurate data on its use.
If we are not shrinking caches effectively, then we have real bugs.
Using drop_caches will simply mask the bugs and make them harder to
find, but certainly does not fix them, nor is it an appropriate
"workaround" to limit the size of the caches. On the contrary, there
have been bug reports on issues that turned out to be misguided use of
cache dropping.
Dropping caches is a very drastic and disruptive operation that is good
for debugging and running tests, but if it creates bug reports from
production use, kernel developers should be aware of its use.
Add a bit more documentation about it, a syslog message to track down
abusers, and vmstat drop counters to help analyze problem reports.
[akpm@linux-foundation.org: checkpatch fixes]
[hannes@cmpxchg.org: add runtime suppression control]
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch removes read_cache_page_async() which wasn't really needed
anywhere and simplifies the code around it a bit.
read_cache_page_async() is useful when we want to read a page into the
cache without waiting for it to complete. This happens when the
appropriate callback 'filler' doesn't complete its read operation and
releases the page lock immediately, and instead queues a different
completion routine to do that. This never actually happened anywhere in
the code.
read_cache_page_async() had 3 different callers:
- read_cache_page() which is the sync version, it would just wait for
the requested read to complete using wait_on_page_read().
- JFFS2 would call it from jffs2_gc_fetch_page(), but the filler
function it supplied doesn't do any async reads, and would complete
before the filler function returns - making it actually a sync read.
- CRAMFS would call it using the read_mapping_page_async() wrapper, with
a similar story to JFFS2 - the filler function doesn't do anything that
reminds async reads and would always complete before the filler function
returns.
To sum it up, the code in mm/filemap.c never took advantage of having
read_cache_page_async(). While there are filler callbacks that do async
reads (such as the block one), we always called it with the
read_cache_page().
This patch adds a mandatory wait for read to complete when adding a new
page to the cache, and removes read_cache_page_async() and its wrappers.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
shmem mappings already contain exceptional entries where swap slot
information is remembered.
To be able to store eviction information for regular page cache, prepare
every site dealing with the radix trees directly to handle entries other
than pages.
The common lookup functions will filter out non-page entries and return
NULL for page cache holes, just as before. But provide a raw version of
the API which returns non-page entries as well, and switch shmem over to
use it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The radix tree hole searching code is only used for page cache, for
example the readahead code trying to get a a picture of the area
surrounding a fault.
It sufficed to rely on the radix tree definition of holes, which is
"empty tree slot". But this is about to change, though, as shadow page
descriptors will be stored in the page cache after the actual pages get
evicted from memory.
Move the functions over to mm/filemap.c and make them native page cache
operations, where they can later be adapted to handle the new definition
of "page cache hole".
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This code used to have its own lru cache pagevec up until a0b8cab3 ("mm:
remove lru parameter from __pagevec_lru_add and remove parts of pagevec
API"). Now it's just add_to_page_cache() followed by lru_cache_add(),
might as well use add_to_page_cache_lru() directly.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We know that "ret > 0" is true here. These tests were left over from
commit 02afc27faec9 ('direct-io: Handle O_(D)SYNC AIO') and aren't
needed any more.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value of bio_get_nr_vecs() cannot be bigger than
BIO_MAX_PAGES, so we can remove redundant the comparison between
nr_pages and BIO_MAX_PAGES.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes the following crash:
kernel BUG at fs/ocfs2/uptodate.c:530!
Modules linked in: ocfs2(F) ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bridge xen_pciback xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd sunrpc 8021q garp stp llc bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iTCO_wdt iTCO_vendor_support dcdbas coretemp freq_table mperf microcode pcspkr serio_raw bnx2 lpc_ich mfd_core i5k_amb i5000_edac edac_core e1000e sg shpchp ext4(F) jbd2(F) mbcache(F) dm_round_robin(F) sr_mod(F) cdrom(F) usb_storage(F) sd_mod(F) crc_t10dif(F) pata_acpi(F) ata_generic(F) ata_piix(F) mptsas(F) mptscsih(F) mptbase(F) scsi_transport_sas(F) radeon(F)
ttm(F) drm_kms_helper(F) drm(F) hwmon(F) i2c_algo_bit(F) i2c_core(F) dm_multipath(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
CPU 5
Pid: 21303, comm: xattr-test Tainted: GF W 3.8.13-30.el6uek.x86_64 #2 Dell Inc. PowerEdge 1950/0M788G
RIP: ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
Process xattr-test (pid: 21303, threadinfo ffff880017aca000, task ffff880016a2c480)
Call Trace:
ocfs2_init_xattr_bucket+0x8a/0x120 [ocfs2]
ocfs2_cp_xattr_bucket+0xbb/0x1b0 [ocfs2]
ocfs2_extend_xattr_bucket+0x20a/0x2f0 [ocfs2]
ocfs2_add_new_xattr_bucket+0x23e/0x4b0 [ocfs2]
ocfs2_xattr_set_entry_index_block+0x13c/0x3d0 [ocfs2]
ocfs2_xattr_block_set+0xf9/0x220 [ocfs2]
__ocfs2_xattr_set_handle+0x118/0x710 [ocfs2]
ocfs2_xattr_set+0x691/0x880 [ocfs2]
ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
generic_setxattr+0x96/0xa0
__vfs_setxattr_noperm+0x7b/0x170
vfs_setxattr+0xbc/0xc0
setxattr+0xde/0x230
sys_fsetxattr+0xc6/0xf0
system_call_fastpath+0x16/0x1b
Code: 41 80 0c 24 01 48 89 df e8 7d f0 ff ff 4c 89 e6 48 89 df e8 a2 fe ff ff 48 89 df e8 3a f0 ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 66 66
RIP ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
It hit the BUG_ON() in ocfs2_set_new_buffer_uptodate():
void ocfs2_set_new_buffer_uptodate(struct ocfs2_caching_info *ci,
struct buffer_head *bh)
{
/* This should definitely *not* exist in our cache */
if (ocfs2_buffer_cached(ci, bh))
printk(KERN_ERR "bh->b_blocknr: %lu @ %p\n", bh->b_blocknr, bh);
BUG_ON(ocfs2_buffer_cached(ci, bh));
set_buffer_uptodate(bh);
ocfs2_metadata_cache_io_lock(ci);
ocfs2_set_buffer_uptodate(ci, bh);
ocfs2_metadata_cache_io_unlock(ci);
}
The problem here is:
We cached a block, but the buffer_head got reused. When we are to pick
up this block again, a new buffer_head created with UPTODATE flag
cleared. ocfs2_buffer_uptodate() returned false since no UPTODATE is
set on the buffer_head. so we set this block to cache as a NEW block,
then it failed at asserting block is not in cache.
The fix is to add a new parameter indicating the bucket is a new
allocated or not to ocfs2_init_xattr_bucket().
ocfs2_init_xattr_bucket() assert block not cached accordingly.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following case may lead to the same system inode ref in confusion.
A thread B thread
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
because of *arr == NULL,
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
gets first ref thru
_ocfs2_get_system_file_inode,
gets second ref thru igrab and
set *arr = inode
at the moment, B thread also gets
two refs, so lead to one more
inode ref.
So add mutex lock to avoid multi thread set two inode ref once at the
same time.
Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In ocfs2_info_handle_freeinode() and ocfs2_test_inode_bit() func, after
calls ocfs2_get_system_file_inode() to get inode ref, if calls
ocfs2_info_scan_inode_alloc() or ocfs2_inode_lock() failed, we should
iput inode alloc to avoid leaking the inode.
Signed-off-by: jiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Orabug: 17330860
When accepting an incomming connection o2net_accept_one clones a child
data socket from the parent listening socket. It then proceeds to setup
the child with callback o2net_data_ready() and sk_user_data to NULL. If
data arrives in this window, o2net_listen_data_ready will be called with
some non-deterministic value in sk_user_data (not inherited). We panic
when we page fault on sk_user_data -- in parent it is
sock_def_readable().
The fix is to recognize that this is a data socket being set up by
looking at the socket state and do nothing.
Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After updating alloc_dinode counts in ocfs2_alloc_dinode_update_counts(),
if ocfs2_alloc_dinode_update_bitmap() failed, there is a rare case that
some space may be lost.
So, roll back alloc_dinode counts when ocfs2_block_group_set_bits()
failed.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_do_flock() calls ocfs2_file_lock() to get the cross-node clock and
then call flock_lock_file_wait() to compete with local processes. In
case flock_lock_file_wait() failed, say -ENOMEM, clean up work is not
done. This patch adds the cleanup --drop the cross-node lock which was
just granted.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that ocfs2_update_inode_fsync_trans() is called any time we touch
an inode in a given transaction. This is a follow-on to the previous
patch to reduce lock contention and deadlocking during an fsync
operation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Wengang <wen.gang.wang@oracle.com>
Cc: Greg Marsden <greg.marsden@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 9548906b2bb7 ('xattr: Constify ->name member of "struct xattr"')
missed that ocfs2 is calling kfree(xattr->name). As a result, kernel
panic occurs upon calling kfree(xattr->name) because xattr->name refers
static constant names. This patch removes kfree(xattr->name) from
ocfs2_mknod() and ocfs2_symlink().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Tested-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When ocfs2_create_new_inode_locks() return error, inode open lock may
not be obtainted for this inode. So other nodes can remove this file
and free dinode when inode still remain in memory on this node, which is
not correct and may trigger BUG. So __ocfs2_mknod_locked should return
error when ocfs2_create_new_inode_locks() failed.
Node_1 Node_2
create fileA, call ocfs2_mknod()
-> ocfs2_get_init_inode(), allocate inodeA
-> ocfs2_claim_new_inode(), claim dinode(dinodeA)
-> call ocfs2_create_new_inode_locks(),
create open lock failed, return error
-> __ocfs2_mknod_locked return success
unlink fileA
try open lock succeed,
and free dinodeA
create another file, call ocfs2_mknod()
-> ocfs2_get_init_inode(), allocate inodeB
-> ocfs2_claim_new_inode(), as Node_2 had freed dinodeA,
so claim dinodeA and update generation for dinodeA
call __ocfs2_drop_dl_inodes()->ocfs2_delete_inode()
to free inodeA, and finally triggers BUG
on(inode->i_generation != le32_to_cpu(fe->i_generation))
in function ocfs2_inode_lock_update().
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Orabug: 18108070
ocfs2_xattr_extend_allocation() hits panic when creating xattr during
data extent alloc phase. The problem occurs if due to local alloc
fragmentation, clusters are spread over multiple extents. In this case
ocfs2_add_clusters_in_btree() finds no space to store more than one
extent record and therefore fails returning RESTART_META. The situation
is anticipated for xattr update case but not xattr create case. This
fix simply ports that code to create case.
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In dlm_query_region_handler(), once kmalloc failed, it will unlock
dlm_domain_lock without lock first, then deadlock happens.
Signed-off-by: Zhonghua Guo <guozhonghua@h3c.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Tested-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
llseek requires ocfs2 inode lock for updating the file size in SEEK_END.
because the file size maybe update on another node.
This bug can be reproduce the following scenario: at first, we dd a test
fileA, the file size is 10k.
on NodeA:
---------
1) open the test fileA, lseek the end of file. and print the position.
2) close the test fileA
on NodeB:
1) open the test fileA, append the 5k data to test FileA.
2) lseek the end of file. and print the position.
3) close file.
At first we run the test program1 on NodeA , the result is 10k. And
then run the test program2 on NodeB, the result is 15k. At last, we run
the test program1 on NodeA again, the result is 10k.
After applying this patch the three step result is 15k.
test result: 1000000 times lseek call;
index lseek with inode lock (unit:us) lseek without inode lock (unit:us)
1 1168162 555383
2 1168011 549504
3 1170538 549396
4 1170375 551685
5 1170444 556719
6 1174364 555307
7 1163294 551552
8 1170080 549350
9 1162464 553700
10 1165441 552594
avg 1168317 552519
avg with lock - avg without lock = 615798
(avg with lock - avg without lock)/1000000=0.615798 us
Signed-off-by: Jensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In o2nm_cluster, cl_idle_timeout_ms, cl_keepalive_delay_ms, as well as
cl_reconnect_delay_ms, are defined as type of unsigned int. So we
should also use unsigned int in the helper functions.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following patches are reverted in this patch because these patches
caused performance regression in the remote unlink() calls.
ea455f8ab683 - ocfs2: Push out dropping of dentry lock to ocfs2_wq
f7b1aa69be13 - ocfs2: Fix deadlock on umount
5fd131893793 - ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
Previous patches in this series removed the possible deadlocks from
downconvert thread so the above patches shouldn't be needed anymore.
The regression is caused because these patches delay the iput() in case
of dentry unlocks. This also delays the unlocking of the open lockres.
The open lockresource is required to test if the inode can be wiped from
disk or not. When the deleting node does not get the open lock, it
marks it as orphan (even though it is not in use by another
node/process) and causes a journal checkpoint. This delays operations
following the inode eviction. This also moves the inode to the orphaned
inode which further causes more I/O and a lot of unneccessary orphans.
The following script can be used to generate the load causing issues:
declare -a create
declare -a remove
declare -a iterations=(1 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384)
unique="`mktemp -u XXXXX`"
script="/tmp/idontknow-${unique}.sh"
cat <<EOF > "${script}"
for n in {1..8}; do mkdir -p test/dir\${n}
eval touch test/dir\${n}/foo{1.."\$1"}
done
EOF
chmod 700 "${script}"
function fcreate ()
{
exec 2>&1 /usr/bin/time --format=%E "${script}" "$1"
}
function fremove ()
{
exec 2>&1 /usr/bin/time --format=%E ssh node2 "cd `pwd`; rm -Rf test*"
}
function fcp ()
{
exec 2>&1 /usr/bin/time --format=%E ssh node3 "cd `pwd`; cp -R test test.new"
}
echo -------------------------------------------------
echo "| # files | create #s | copy #s | remove #s |"
echo -------------------------------------------------
for ((x=0; x < ${#iterations[*]} ; x++)) do
create[$x]="`fcreate ${iterations[$x]}`"
copy[$x]="`fcp ${iterations[$x]}`"
remove[$x]="`fremove`"
printf "| %8d | %9s | %9s | %9s |\n" ${iterations[$x]} ${create[$x]} ${copy[$x]} ${remove[$x]}
done
rm "${script}"
echo "------------------------"
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we are dropping last inode reference from downconvert thread, we will
end up calling ocfs2_mark_lockres_freeing() which can block if the lock
we are freeing is queued thus creating an A-A deadlock. Luckily, since
we are the downconvert thread, we can immediately dequeue the lock and
thus avoid waiting in this case.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We cannot drop last dquot reference from downconvert thread as that
creates the following deadlock:
NODE 1 NODE2
holds dentry lock for 'foo'
holds inode lock for GLOBAL_BITMAP_SYSTEM_INODE
dquot_initialize(bar)
ocfs2_dquot_acquire()
ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
...
downconvert thread (triggered from another
node or a different process from NODE2)
ocfs2_dentry_post_unlock()
...
iput(foo)
ocfs2_evict_inode(foo)
ocfs2_clear_inode(foo)
dquot_drop(inode)
...
ocfs2_dquot_release()
ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
- blocks
finds we need more space in
quota file
...
ocfs2_extend_no_holes()
ocfs2_inode_lock(GLOBAL_BITMAP_SYSTEM_INODE)
- deadlocks waiting for
downconvert thread
We solve the problem by postponing dropping of the last dquot reference to
a workqueue if it happens from the downconvert thread.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide dqgrab() function to get quota structure reference when we are
sure it already has at least one active reference. Make use of this
function inside quota code.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move dquot_initalize() call in ocfs2_delete_inode() after the moment we
verify inode is actually a sane one to delete. We certainly don't want
to initialize quota for system inodes etc. This also avoids calling
into quota code from downconvert thread.
Add more details into the comment why bailing out from
ocfs2_delete_inode() when we are in downconvert thread is OK.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The flag was never set, delete it.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a part of the nocontrold feature which was incorporated sometime
back.
This is required for backward compatibility of the tools, specifically
the scenario where the tools with recovery callback is used with a
kernel not using the recovery callbacks (older kernel + newer tools).
The tools look for this file to understand if the kernel supports DLM
recovery callbacks.
For kernels which support recovery callbacks but will miss this patch,
ocfs2 will continue to use the older API and would still be able to
mount the filesystem.
[akpm@linux-foundation.org: simplify]
[sfr@canb.auug.org.au: VERIFY_OCTAL_PERMISSIONS fix up]
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node. After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value. This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.
old recovery master: new recovery master:
dlm_remaster_locks()
become recovery master for
another dead node.
dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
return -EAGAIN;
}
dlm_set_reco_master(dlm, br->node_idx);
dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
will hang in dlm_remaster_locks() for
request dlm locks info
Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.
A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This issue was introduced by commit 800deef3f6f8 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry. The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this. Sunil advised reverting it back, but the old version was
also not right. At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic. So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.
Another concern is that this seemes can not happen because the "tmpq"
list should not be empty. Let me describe how.
old lock resource owner(node 1): migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
dlm_pick_migration_target() {
pick node 2 as target as its lock is the first one
in granted list.
}
dlm_migrate_lockres() {
dlm_mark_lockres_migrating() {
res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
//after the above code, we can not dirty lockres any more,
// so dlm_thread shuffle list will not run
downconvert lock from EX to NR
upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.
// will set lockres RES_MIGRATING flag, the following
// lock/unlock can not run
dlm_lockres_release_ast(dlm, res);
}
dlm_send_one_lockres()
dlm_process_recovery_data()
for (i=0; i<mres->num_locks; i++)
if (ml->node == dlm->node_num)
for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
list_for_each_entry(lock, tmpq, list)
if (lock) break; <<< lock is invalid as grant list is empty.
}
if (lock->ml.node != ml->node)
BUG() >>> crash here
}
I see the above locks status from a vmcore of our internal bug.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal
transaction to complete. This isn't terribly efficient, since sync_file
really only needs to wait for the last transaction involving that inode
to complete, and this doesn't require i_mutex.
Therefore, implement the necessary bits to track the newest tid
associated with an inode, and teach sync_file to wait for that instead
of waiting for everything in the journal to commit. Furthermore, only
issue the flush request to the drive if jbd2 hasn't already done so.
This also eliminates the deadlock between ocfs2_file_aio_write() and
ocfs2_sync_file(). aio_write takes i_mutex then calls
ocfs2_aiodio_wait() to wait for unaligned dio writes to finish.
However, if that dio completion involves calling fsync, then we can get
into trouble when some ocfs2_sync_file tries to take i_mutex.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Variable uuid_net_key in ocfs2_initialize_super() is not used. Clean it
up.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a problem that waitqueue_active() may check stale data thus miss
a wakeup of threads waiting on ip_unaligned_aio.
The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to
be of type mutex thus the above prolem is avoid. Another benifit is that
mutex which works as FIFO is fairer than wake_up_all().
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When mounting an ocfs2 volume, it will firstly generate a file
/sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread.
So the following situation will cause a null pointer dereference.
dlm_debug_init -> access file dlm_state which will call dlm_state_print ->
dlm_launch_thread
Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread
can fix this issue.
Signed-off-by: Zongxun Wang <wangzongxun@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move code moving event structure to access_list from copy_event_to_user()
to fanotify_read() where it is more logical (so that we can immediately
see in the main loop that we either move the event to a different list
or free it). Also move special error handling for permission events
from copy_event_to_user() to the main loop to have it in one place with
error handling for normal events. This makes copy_event_to_user()
really only copy the event to user without any side effects.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Swap the error / "read ok" branches in the main loop of fanotify_read().
We will grow the "read ok" part in the next patch and this makes the
indentation easier. Also it is more common to have error conditions
inside an 'if' instead of the fast path.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
access_mutex is used only to guard operations on access_list. There's
no need for sleeping within this lock so just make a spinlock out of it.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, fanotify creates new structure to track the fact that
permission event has been reported to userspace and someone is waiting
for a response to it. As event structures are now completely in the
hands of each notification framework, we can use the event structure for
this tracking instead of allocating a new structure.
Since this makes the event structures for normal events and permission
events even more different and the structures have different lifetime
rules, we split them into two separate structures (where permission
event structure contains the structure for a normal event). This makes
normal events 8 bytes smaller and the code a tad bit cleaner.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The prepare_for_access_response() function checks whether
group->fanotify_data.bypass_perm is set. However this test can never be
true because prepare_for_access_response() is called only from
fanotify_read() which means fanotify group is alive with an active fd
while bypass_perm is set from fanotify_release() when all file
descriptors pointing to the group are closed and the group is going
away.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nameidata was replaced by flags in commit 00cd8dd3bf95 ("stop passing
nameidata to ->lookup()").
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cifs_init_inodecache is only called by __init init_cifs.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 839a8e8660b6 ("writeback: replace custom worker pool
implementation with unbound workqueue") when device is removed while we
are writing to it we crash in bdi_writeback_workfn() ->
set_worker_desc() because bdi->dev is NULL.
This can happen because even though bdi_unregister() cancels all pending
flushing work, nothing really prevents new ones from being queued from
balance_dirty_pages() or other places.
Fix the problem by clearing BDI_registered bit in bdi_unregister() and
checking it before scheduling of any flushing work.
Fixes: 839a8e8660b6777e7fe4e80af1a048aebe2b5977
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to
schedule work to writeback dirty inodes. The problem with this is that
it can delay work that is scheduled for immediate execution, such as the
work from sync_inodes_sb(). This can happen since mod_delayed_work()
can now steal work from a work_queue. This fixes the problem by using
queue_delayed_work() instead. This is a regression caused by commit
839a8e8660b6 ("writeback: replace custom worker pool implementation with
unbound workqueue").
The reason that this causes a problem is that laptop-mode will change
the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default.
In the case that bdi_wakeup_thread_delayed() races with
sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung
task. Even if dirty_writeback_centisecs is not long enough to cause a
hung task, we still don't want to delay sync for that long.
We fix the problem by using queue_delayed_work() when we want to
schedule writeback sometime in future. This function doesn't change the
timer if it is already armed.
For the same reason, we also change bdi_writeback_workfn() to
immediately queue the work again in the case that the work_list is not
empty. The same problem can happen if the sync work is run on the
rescue worker.
[jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zento.linux.org.uk>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull trivial tree updates from Jiri Kosina:
"Usual rocket science -- mostly documentation and comment updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
sparse: fix comment
doc: fix double words
isdn: capi: fix "CAPI_VERSION" comment
doc: DocBook: Fix typos in xml and template file
Bluetooth: add module name for btwilink
driver core: unexport static function create_syslog_header
mmc: core: typo fix in printk specifier
ARM: spear: clean up editing mistake
net-sysfs: fix comment typo 'CONFIG_SYFS'
doc: Insert MODULE_ in module-signing macros
Documentation: update URL to hfsplus Technote 1150
gpio: update path to documentation
ixgbe: Fix format string in ixgbe_fcoe.
Kconfig: Remove useless "default N" lines
user_namespace.c: Remove duplicated word in comment
CREDITS: fix formatting
treewide: Fix typo in Documentation/DocBook
mm: Fix warning on make htmldocs caused by slab.c
ata: ata-samsung_cf: cleanup in header file
idr: remove unused prototype of idr_free()
|
|
Pull devicetree changes from Grant Likely:
"Updates to devicetree core code. This branch contains the following
notable changes:
- add reserved memory binding
- make struct device_node a kobject and remove legacy
/proc/device-tree
- ePAPR conformance fixes
- update in-kernel DTC copy to version v1.4.0
- preparatory changes for dynamic device tree overlays
- minor bug fixes and documentation changes
The most significant change in this branch is the conversion of struct
device_node to be a kobject that is exposed via sysfs and removal of
the old /proc/device-tree code. This simplifies the device tree
handling code and tightens up the lifecycle on device tree nodes.
[updated: added fix for dangling select PROC_DEVICETREE]"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
dt: Remove dangling "select PROC_DEVICETREE"
of: Add support for ePAPR "stdout-path" property
of: device_node kobject lifecycle fixes
of: only scan for reserved mem when fdt present
powerpc: add support for reserved memory defined by device tree
arm64: add support for reserved memory defined by device tree
of: add missing major vendors
of: add vendor prefix for SMSC
of: remove /proc/device-tree
of/selftest: Add self tests for manipulation of properties
of: Make device nodes kobjects so they show up in sysfs
arm: add support for reserved memory defined by device tree
drivers: of: add support for custom reserved memory drivers
drivers: of: add initialization code for dynamic reserved memory
drivers: of: add initialization code for static reserved memory
of: document bindings for reserved-memory nodes
Revert "of: fix of_update_property()"
kbuild: dtbs_install: new make target
ARM: mvebu: Allows to get the SoC ID even without PCI enabled
of: Allows to use the PCI translator without the PCI core
...
|
Josh Triplett
Wang YanQing
Fabian Frederick
Dave Hansen
Sasha Levin
Johannes Weiner
Joonsoo Kim
Dan Carpenter
Gu Zheng
Wengang Wang
jiangyiwen
Tariq Saeed
Younger Liu
Darrick J. Wong
Tetsuo Handa
alex chen
Xue jiufei
Zhonghua Guo
Jensen
Joseph Qi
Goldwyn Rodrigues
Jan Kara
Junxiao Bi
Zongxun Wang
Derek Basehore
Linus Torvalds