| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Export additional helpers from the format-helper library and open-code
drm_fb_blit() in tests. Prepares for the removal of drm_fb_blit(). Only
sysfb drivers use drm_fb_blit(). The function will soon be removed from
format helpers and be refactored within sysfb helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250616083846.221396-2-tzimmermann@suse.de
|
|
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
|
|
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
|
|
Add support for EDID based quirks which can be queried outside of the
EDID parser iteself by DRM core and drivers. There are at least two such
quirks applicable to all drivers: the DPCD register access probe quirk
and the 128b/132b DPRX Lane Count Conversion quirk (see 3.5.2.16.3 in
the v2.1a DP Standard). The latter quirk applies to panels with specific
EDID panel names, support for defining a quirk this way will be added as
a follow-up.
v2: Reset global_quirks in drm_reset_display_info().
v3: (Jani)
- Use one list for both the global and internal quirks.
- Drop change for panel name specific quirks.
- Add comment about the way quirks should be queried.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-4-imre.deak@intel.com
|
|
As per updated Bspec, Sync PCI IDs for BMG.
Bspec: 68090
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250605190804.1287289-2-dnyaneshwar.bhadane@intel.com
|
|
Backmerging to forward to v6.16-rc1
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Backmerging to bring in 6.16
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Some users of DRM bridges may need to execute specific code just before
deallocation.
As of now the only known user would be KUnit tests.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250606-drm-bridge-alloc-doc-test-v9-2-b5bf7b43ed92@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move the bridge pre_enable call before crtc enable, and the bridge
post_disable call after the crtc disable.
The sequence of enable after this patch will look like:
bridge[n]_pre_enable
...
bridge[1]_pre_enable
crtc_enable
encoder_enable
bridge[1]_enable
...
bridge[n]_enable
And, the disable sequence for the display pipeline will look like:
bridge[n]_disable
...
bridge[1]_disable
encoder_disable
crtc_disable
bridge[1]_post_disable
...
bridge[n]_post_disable
The definition of bridge pre_enable hook says that,
"The display pipe (i.e. clocks and timing signals) feeding this bridge
will not yet be running when this callback is called".
Since CRTC is also a source feeding the bridge, it should not be enabled
before the bridges in the pipeline are pre_enabled. Fix that by
re-ordering the sequence of bridge pre_enable and bridge post_disable.
While at it, update the drm bridge API documentation as well.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250605171524.27222-4-aradhya.bhatia@linux.dev
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Christian needs a recent drm-next branch to merge fence patches.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
|
|
Inline drm_gem_pin() into its only caller drm_gem_map_attach()
and update the documentation in the callback's purpose. Do the
equivalent for drm_gem_unpin(). Also add stricter error checking
on the involved locking.
The pin operation in the GEM object functions is a helper for
PRIME-exported buffer objects. Having drm_gem_pin() gives the
impression of a general-purpose interface, which is not the case.
Removing it makes the pin callback a bit harder to misuse.
v2:
- clarify comment on pin callback (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250526132634.531789-5-tzimmermann@suse.de
|
|
There are no external callers of the gem-vram pin helpers. Hence
unexport them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250526132634.531789-4-tzimmermann@suse.de
|
|
Add PANEL REPLAY CAPABILITY register (0xb1) bits.
v3:
- added DP_DSC_DECODE_CAPABILITY definitions
- use defined shift instead of hardcoded value
v2: comment about DP2.1 changed as DP2.1a
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-3-jouni.hogander@intel.com
|
|
Add new definition for size of Panel Replay DPCD capability registers
area. Rename existing definitions to group capability registers together.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250526120512.1702815-2-jouni.hogander@intel.com
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
Its only purpose was for trace events, but jobs can already be
uniquely identified using their fence.
The downside of using the fence is that it's only available
after 'drm_sched_job_arm' was called which is true for all trace
events that used job.id so they can safely switch to using it.
Suggested-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-9-pierre-eric.pelloux-prayer@amd.com
|
|
This will be used in a later commit to trace the drm client_id in
some of the gpu_scheduler trace events.
This requires changing all the users of drm_sched_job_init to
add an extra parameter.
The newly added drm_client_id field in the drm_sched_fence is a bit
of a duplicate of the owner one. One suggestion I received was to
merge those 2 fields - this can't be done right now as amdgpu uses
some special values (AMDGPU_FENCE_OWNER_*) that can't really be
translated into a client id. Christian is working on getting rid of
those; when it's done we should be able to squash owner/drm_client_id
together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-3-pierre-eric.pelloux-prayer@amd.com
|
|
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
|
|
Prevent drivers from using this directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20240723121750.2086-8-christian.koenig@amd.com
|
|
This reverts commit 24dc64c1ba5c3ef0463d59fef6df09336754188d.
Shouldn't be needed by drivers any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20240723121750.2086-6-christian.koenig@amd.com
|
|
Provide helpers that program hardware gamma LUTs. Tha gamma ramp is
either provided by the driver or generated by the helper.
The DRM driver exports the GAMMA_LUT property with a fixed number of
entries per color component, such as 256 on 8-bit-wide components. The
entries describe the gamma ramp of each individual component. The new
helper drm_crtc_load_gamma_888() loads such gamma ramp to hardware. The
hardware uses each displayed pixel's individial components as indices
into the hardware gamma table.
For color modes with less than 8 bits per color component, the helpers
drm_crtc_load_gamma_565_from() and drm_crtc_load_gamma_555_from_888()
interpolate the provided gamma ramp to reduce it to the correct number
of entries; 5/6/5 for RGB565-like formats and 5/5/5 for XRGB1555-like
formats.
If no gamma ramp has been provided, drivers can use the new helper
drm_crtc_fill_gamma_888() to load a default gamma ramp with 256 entries
per color component. For color modes with less bits, the new helpers
drm_crtc_fill_gamma_565() and drm_crtc_fill_gamma_555() are available.
The default gamma ramp uses a gamma factor of 1.
For color modes with palette, drm_crtc_load_palette_8() load an 8-bit
palette into the hardware. If no palette has been specified,
drm_crtc_fill_palette_8() load a system-specific default palette. This
is currently only a grey-scale palette with increasing luminance, but
later patches can change this. For PCs, a VGA default palette could
be used.
v2:
- drop comment on gamma factor of 2.2 (Michel, Pekka)
- fix typos in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-2-tzimmermann@suse.de
|
|
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 49c6dc74b5968885f421f9f1b45eb4890b955870)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit 5164553d739e ("drm/bridge: add devm_drm_put_bridge()") adds two
declarations for devm_drm_put_bridge():
1) an inline declaration in the #else branch of
'#if defined(CONFIG_OF)...'
2) one outside of the same #if
This results in a build failure with CONFIG_OF=n:
../drivers/gpu/drm/drm_bridge.c:1406:6: error: redefinition of ‘devm_drm_put_bridge’
The function has nothing to do with OF, thus fix by removing declaration 1.
Fixes: 5164553d739e ("drm/bridge: add devm_drm_put_bridge()")
Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://oftc.catirclogs.org/dri-devel/2025-05-21#34288266;
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/20250522-devm_drm_put_bridge-fix-non-of-build-v1-1-a05234dea046@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Bridges obtained via devm_drm_bridge_alloc(dev, ...) will be put when the
requesting device (@dev) is removed.
However drivers which obtained them may need to put the obtained reference
explicitly. One such case is if they bind the devm removal action to a
different device than the one implemented by the driver itself and which
might be removed at a different time, such as bridge/panel.c.
Add devm_drm_put_bridge() to manually release a devm-obtained bridge in
such cases.
This function is considered only a temporary workaround until the panel
bridge is reworked and should be removed afterwards.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-20-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Implement necessary glue code to let DRM bridge drivers to implement CEC
adapters support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-9-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Allow HDMI DRM bridges to create CEC notifier. Physical address is
handled automatically by drm_atomic_helper_connector_hdmi_hotplug()
being called from .detect() path.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-8-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
As a preparation to adding HDMI CEC helper code, add CEC-related fields
to the struct drm_connector. The callbacks abstract CEC infrastructure
in order to support CEC adapters and CEC notifiers in a universal way.
CEC data is a void pointer as it allows us to make CEC data
helper-specific. For example, currently it will be either cec_notifier
or cec_adapter + drm_connector_hdmi_cec_funcs. Later cec-pin might store
platform callbacks here. DP CEC might need to store AUX pointer, etc.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-3-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
WHen adding HDMI fields I didn't notice the private: declaration for HPD
fields. Move private fields to the end of the struct drm_bride to have
clear distinction between private and public fields.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-1-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Nova changes for v6.16
auxiliary:
- bus abstractions
- implementation for driver registration
- add sample driver
drm:
- implement __drm_dev_alloc()
- DRM core infrastructure Rust abstractions
- device, driver and registration
- DRM IOCTL
- DRM File
- GEM object
- IntoGEMObject rework
- generically implement AlwaysRefCounted through IntoGEMObject
- refactor unsound from_gem_obj() into as_ref()
- refactor into_gem_obj() into as_raw()
driver-core:
- merge topic/device-context-2025-04-17 from driver-core tree
- implement Devres::access()
- fix: doctest build under `!CONFIG_PCI`
- accessor for Device::parent()
- fix: conditionally expect `dead_code` for `parent()`
- impl TryFrom<&Device> bus devices (PCI, platform)
nova-core:
- remove completed Vec extentions from task list
- register auxiliary device for nova-drm
- derive useful traits for Chipset
- add missing GA100 chipset
- take &Device<Bound> in Gpu::new()
- infrastructure to generate register definitions
- fix register layout of NV_PMC_BOOT_0
- move Firmware into own (Rust) module
- fix: select AUXILIARY_BUS
nova-drm:
- initial driver skeleton (depends on drm and auxiliary bus
abstractions)
- fix: select AUXILIARY_BUS
Rust (dependencies):
- implement Opaque::zeroed()
- implement Revocable::try_access_with()
- implement Revocable::access()
From: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
|
|
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).
Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.
This with the flag set in nouveau, allows eDP probing on GB203 device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
|
|
Add timeslicing support to GPU SVM which will guarantee the GPU a
minimum execution time on piece of physical memory before migration back
to CPU. Intended to implement strict migration policies which require
memory to be in a certain placement for correct execution.
Required for shared CPU and GPU atomics on certain devices.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-4-matthew.brost@intel.com
(cherry picked from commit 8dc1812b5b3a42311d28eb385eed88e2053ad3cb)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c949160 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
(cherry picked from commit a9ac0fa455b050d03e3032501368048fb284d318)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-2-matthew.brost@intel.com
(cherry picked from commit 8a9b978ebd47df9e0694c34748c2d6fa0c31eb4d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The drm_gpusvm_find_vma_start() function is used to determine the starting
address of a CPU VMA within a specified user range. If the range does not
contain any VMA, the function returns ULONG_MAX.
v2
- Rename function as drm_gpusvm_find_vma_start() (Matthew Brost)
- mmget/mmput
v3
- s/mmget/mmget_not_zero/
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-13-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
The GPU scheduler's comments refer to a "thread" at various places.
Those are leftovers from commit a6149f039369 ("drm/sched: Convert drm
scheduler to use a work queue rather than kthread").
Replace all references to kthreads.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250314101023.111248-2-phasta@kernel.org
|
|
Add timeslicing support to GPU SVM which will guarantee the GPU a
minimum execution time on piece of physical memory before migration back
to CPU. Intended to implement strict migration policies which require
memory to be in a certain placement for correct execution.
Required for shared CPU and GPU atomics on certain devices.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-4-matthew.brost@intel.com
|
|
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c949160 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
|
|
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-2-matthew.brost@intel.com
|
|
amd-drm-next-6.16-2025-05-09:
amdgpu:
- IPS fixes
- DSC cleanup
- DC Scaling updates
- DC FP fixes
- Fused I2C-over-AUX updates
- SubVP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
- DCN 2.1 fixes
- DPIA fixes
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- Misc code cleanups
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
amdkfd:
- Update error messages for SDMA
- Userptr updates
drm:
- Add drm_file_err function
dma-buf:
- Add a helper to sort and deduplicate dma_fence arrays
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250509230951.3871914-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
|
|
There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.
v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com
|
|
Short summary of fixes pull:
drm:
- Fix overflow when generating wedged event
ivpu:
- Increate timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
panel:
- simple: Fix timings for AUO G101EVN010
ttm:
- Fix documentation
- Remove struct ttm_backup
v3d:
- Avoid memory leak in job handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250508104939.GA76697@2a02-2454-fd5e-fd00-c110-cbf2-6528-c5be.dyn6.pyur.net
|
|
The abstraction was previously added to support separate
ttm_backup implementations.
However with the current implementation casting from a
struct file to a struct ttm_backup, we run into trouble since
struct file may have randomized the layout and gcc complains.
Remove the struct ttm_backup abstraction
Cc: dri-devel@lists.freedesktop.org
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/dri-devel/9c8dbbafdaf9f3f089da2cde5a772d69579b3795.camel@linux.intel.com/T/#mb153ab9216cb813b92bdeb36f391ad4808c2ba29
Suggested-by: Christian König <christian.koenig@amd.com>
Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250502130014.3156-1-thomas.hellstrom@linux.intel.com
|
|
The docs were not properly updated from an earlier version of the code.
Fixes: e7b5d23e5d47 ("drm/ttm: Provide a shmem backup implementation")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250502130101.3185-1-thomas.hellstrom@linux.intel.com
|
Thomas Zimmermann
André Almeida
Imre Deak
Shekhar Chauhan
Thomas Hellström
Jani Nikula
Luca Ceresoli
Aradhya Bhatia
Maxime Ripard
Shixiong Ou
Jouni Högander
Linus Torvalds
Pierre-Eric Pelloux-Prayer
Christian König
Matt Atwood
Dmitry Baryshkov
Dave Airlie
Matthew Brost
Himal Prasad Ghimiray
Philipp Stanner
Arun R Murthy