| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We now have a arch_dma_prep_coherent architecture hook that is used
for the generic DMA remap allocator, and we should use the same
interface for the dma-iommu code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
No need for a __KERNEL__ guard outside uapi and add a missing comment
describing the #else cpp statement. Last but not least include
<linux/errno.h> instead of the asm version, which is frowned upon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Normally during iommu probing a device, a default doamin will
be allocated and attached to the device. The domain type of
the default domain is statically defined, which results in a
situation where the allocated default domain isn't suitable
for the device due to some limitations. We already have API
iommu_request_dm_for_dev() to replace a DMA domain with an
identity one. This adds iommu_request_dma_domain_for_dev()
to request a dma domain if an allocated identity domain isn't
suitable for the device in question.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
All of the callers pass current into force_sig_mceer so remove the
task parameter to make this obvious.
This also makes it clear that force_sig_mceerr passes current
into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function force_sigsegv is always called on the current task
so passing in current is redundant and not passing in current
makes this fact obvious.
This also makes it clear force_sigsegv always calls force_sig
on the current task.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
A scalable mode DMAR table walk would involve looking at bits in each stage
of walk, like,
1. Is PASID enabled in the context entry?
2. What's the size of PASID directory?
3. Is the PASID directory entry present?
4. Is the PASID table entry present?
5. Number of PASID table entries?
Hence, add these macros that will later be used during this walk.
Apart from adding new macros, move existing macros (like
pasid_pde_is_present(), get_pasid_table_from_pde() and pasid_supported())
to appropriate header files so that they could be reused.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle. However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.
To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0. Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.
Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On systems with ACPI platform firmware the last stage of hibernation
is analogous to system suspend to S3 (suspend-to-RAM), so it should
be handled analogously. In particular, pm_suspend_via_firmware()
should return 'true' in that stage to let the callers of it know that
control will be passed to the platform firmware going forward, so
pm_set_suspend_via_firmware() needs to be called then in analogy with
acpi_suspend_begin().
However, the platform hibernation ->begin() callback is invoked
during the "freeze" transition (before creating a snapshot image of
system memory) as well as during the "hibernate" transition which is
the last stage of it and pm_set_suspend_via_firmware() should be
invoked by that callback in the latter stage only.
In order to implement that redefine the hibernation ->begin()
callback to take a pm_message_t argument to indicate which stage
of hibernation is taking place and rework acpi_hibernation_begin()
and acpi_hibernation_begin_old() to take it into account as needed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The AXI HDL cores provided for Analog Devices reference designs all share
some common base registers (e.g. version register at address 0x00).
To reduce duplication for this, a common header is added to define these
registers as well as bitfields & macros to work with these registers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Let the DMA engine core do the device node validation instead of drivers.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When user try to request one DMA channel by __dma_request_channel(), it won't
validate if it is the correct DMA device to request, that will lead each DMA
engine driver to validate the correct device node in their filter function
if it is necessary.
Thus we can add the matching device node validation in the DMA engine core,
to remove all of device node validation in the drivers.
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing definitions are ambiguous and possibly misleading.
For DP0, 'flow-control' is only relevant for the BRA protocol and
should not be confused with async modes explicitly not supported for
DP0, add prefix to follow MIPI DisCo definition
The use of 'device_interrupts' is also questionable. The MIPI
SoundWire spec defines Slave-, DP0- and DPN-level
implementation-defined interrupts. Using the 'device' prefix in the
last two cases is misleading, not only is the term 'device' overloaded
but these properties are only valid at the DP0 and DPn levels. Rename
to follow the MIPI definitions, no need to be creative here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The MIPI DisCo spec refers to dynamic frame shape, not to dynamic
shape. Clarify.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix support for clock_stop_mode0 and 1. The existing code uses a
bitmask between enums, one of which being zero. Or-ing with zero is
not very useful in general...Fix by or-ing with a BIT dependent on the
enum value.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rename all fields with 'freq' as 'clk_freq' to follow the MIPI
specification and avoid confusion between bus clock and audio clocks.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The master_count is only defined for a Controller or a Slave in the
MIPI DisCo for SoundWire document.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The SoundWire and DisCo specifications do not define Master data ports
or related properties. Data ports are only defined for Slave devices,
so remove the unused member in properties.
Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Somehow previous header files did not include definition for
sink/source, flow and grouping.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add iWARP engine affinity setting for supporting iWARP over 100g.
iWARP cannot be distinguished by the LLH from L2, hence the
engine division will affect L2 as well. For this reason we add
a parameter to devlink to determine the engine division.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When initializing status blocks use the affined hwfn
instead of the leading one for RDMA / Storage
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Declare a prototype of non-static __probe_user_read() as
same as __probe_kernel_read() at uaccess.h.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add probe_user_read(), strncpy_from_unsafe_user() and
strnlen_unsafe_user() which allows caller to access user-space
in IRQ context.
Current probe_kernel_read() and strncpy_from_unsafe() are
not available for user-space memory, because it sets
KERNEL_DS while accessing data. On some arch, user address
space and kernel address space can be co-exist, but others
can not. In that case, setting KERNEL_DS means given
address is treated as a kernel address space.
Also strnlen_user() is only available from user context since
it can sleep if pagefault is enabled.
To access user-space memory without pagefault, we need
these new functions which sets USER_DS while accessing
the data.
Link: http://lkml.kernel.org/r/155789869802.26965.4940338412595759063.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
WARN_ON_IN_IRQ() assumes that the access_ok() and following
user memory access can sleep. But this assumption is not
always correct; when the pagefault is disabled, following
memory access will just returns -EFAULT and never sleep.
Add pagefault_disabled() check in WARN_ON_ONCE() so that
it can ignore the case we call it with disabling pagefault.
For this purpose, this modified pagefault_disabled() as
an inline function.
Link: http://lkml.kernel.org/r/155789868664.26965.7932665824135793317.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The code modification functions have "enable" and "update" variables that
are sometimes "int" but used as "bool". Remove the ambiguity and make them
"bool" when they are only used for true or false values.
Link: http://lkml.kernel.org/r/e1429923d9eda92a3cf5ee9e33c7eacce539781d.1558115654.git.naveen.n.rao@linux.vnet.ibm.com
Reported-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
ethtool ops get_rxfh_context and set_rxfh_context are used to create,
remove and access parameters associated to RSS contexts, in a similar
fashion to get_rxfh and set_rxfh.
Add a small descritopn of these callbacks in the struct ethtool_ops doc.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kill sget_userns(), folding it into sget() as that's the only remaining
user.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-fsdevel@vger.kernel.org
|
|
... now that all other callers are gone
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Provide a function, init_pseudo(), that provides a common
infrastructure for converting pseudo-filesystems that can never be
mountable.
[AV: once all users of mount_pseudo_xattr() get converted, it will be folded
into pseudo_fs_get_tree()]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-fsdevel@vger.kernel.org
|
|
Provide a field in the fs_context struct through which bits in the
sb->s_iflags superblock field can be set.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-fsdevel@vger.kernel.org
|
|
Kill mount_ns() as it has been replaced by vfs_get_super() in the new mount
API.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Once upon a time we used to set ->d_name of e.g. pipefs root
so that d_path() on pipes would work. These days it's
completely pointless - dentries of pipes are not even connected
to pipefs root. However, mount_pseudo() had set the root
dentry name (passed as the second argument) and callers
kept inventing names to pass to it. Including those that
didn't *have* any non-root dentries to start with...
All of that had been pointless for about 8 years now; it's
time to get rid of that cargo-culting...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In rcu_rrupt_from_idle, we want to check if it is called from within an
interrupt, but want to do such checking only for debug builds. lockdep
already tracks when we enter an interrupt. Let us expose it as an
assertion macro so it can be used to assert this.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@android.com
Cc: rcu@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
When RCU core processing is offloaded from RCU_SOFTIRQ to the rcuc
kthreads, a full and unconditional wakeup is required to initiate RCU
core processing. In contrast, when RCU core processing is carried
out by RCU_SOFTIRQ, a raise_softirq() suffices. Of course, there are
situations where raise_softirq() does a full wakeup, but these do not
occur with normal usage of rcu_read_unlock().
The reason that full wakeups can be problematic is that the scheduler
sometimes invokes rcu_read_unlock() with its pi or rq locks held,
which can of course result in deadlock in CONFIG_PREEMPT=y kernels when
rcu_read_unlock() invokes the scheduler. Scheduler invocations can happen
in the following situations: (1) The just-ended reader has been subjected
to RCU priority boosting, in which case rcu_read_unlock() must deboost,
(2) Interrupts were disabled across the call to rcu_read_unlock(), so
the quiescent state must be deferred, requiring a wakeup of the rcuc
kthread corresponding to the current CPU.
Now, the scheduler may hold one of its locks across rcu_read_unlock()
only if preemption has been disabled across the entire RCU read-side
critical section, which in the days prior to RCU flavor consolidation
meant that rcu_read_unlock() never needed to do wakeups. However, this
is no longer the case for any but the first rcu_read_unlock() following a
condition (e.g., preempted RCU reader) requiring special rcu_read_unlock()
attention. For example, an RCU read-side critical section might be
preempted, but preemption might be disabled across the rcu_read_unlock().
The rcu_read_unlock() must defer the quiescent state, and therefore
leaves the task queued on its leaf rcu_node structure. If a scheduler
interrupt occurs, the scheduler might well invoke rcu_read_unlock() with
one of its locks held. However, the preempted task is still queued, so
rcu_read_unlock() will attempt to defer the quiescent state once more.
When RCU core processing is carried out by RCU_SOFTIRQ, this works just
fine: The raise_softirq() function simply sets a bit in a per-CPU mask
and the RCU core processing will be undertaken upon return from interrupt.
Not so when RCU core processing is carried out by the rcuc kthread: In this
case, the required wakeup can result in deadlock.
The initial solution to this problem was to use set_tsk_need_resched() and
set_preempt_need_resched() to force a future context switch, which allows
rcu_preempt_note_context_switch() to report the deferred quiescent state
to RCU's core processing. Unfortunately for expedited grace periods,
there can be a significant delay between the call for a context switch
and the actual context switch.
This commit therefore introduces a ->deferred_qs flag to the task_struct
structure's rcu_special structure. This flag is initially false, and
is set to true by the first call to rcu_read_unlock() requiring special
attention, then finally reset back to false when the quiescent state is
finally reported. Then rcu_read_unlock() attempts full wakeups only when
->deferred_qs is false, that is, on the first rcu_read_unlock() requiring
special attention. Note that a chain of RCU readers linked by some other
sort of reader may find that a later rcu_read_unlock() is once again able
to do a full wakeup, courtesy of an intervening preemption:
rcu_read_lock();
/* preempted */
local_irq_disable();
rcu_read_unlock(); /* Can do full wakeup, sets ->deferred_qs. */
rcu_read_lock();
local_irq_enable();
preempt_disable()
rcu_read_unlock(); /* Cannot do full wakeup, ->deferred_qs set. */
rcu_read_lock();
preempt_enable();
/* preempted, >deferred_qs reset. */
local_irq_disable();
rcu_read_unlock(); /* Can again do full wakeup, sets ->deferred_qs. */
Such linked RCU readers do not yet seem to appear in the Linux kernel, and
it is probably best if they don't. However, RCU needs to handle them, and
some variations on this theme could make even raise_softirq() unsafe due to
the possibility of its doing a full wakeup. This commit therefore also
avoids invoking raise_softirq() when the ->deferred_qs set flag is set.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Pull libnvdimm fixes from Dan Williams:
- Fix a regression that disabled device-mapper dax support
- Remove unnecessary hardened-user-copy overhead (>30%) for dax
read(2)/write(2).
- Fix some compilation warnings.
* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
dax: Arrange for dax_supported check to span multiple devices
libnvdimm: Fix compilation warnings with W=1
|
|
After previous patches, verifier will mark a insn if it really needs zero
extension on dst_reg.
It is then for back-ends to decide how to use such information to eliminate
unnecessary zero extension code-gen during JIT compilation.
One approach is verifier insert explicit zero extension for those insns
that need zero extension in a generic way, JIT back-ends then do not
generate zero extension for sub-register write at default.
However, only those back-ends which do not have hardware zero extension
want this optimization. Back-ends like x86_64 and AArch64 have hardware
zero extension support that the insertion should be disabled.
This patch introduces new target hook "bpf_jit_needs_zext" which returns
false at default, meaning verifier zero extension insertion is disabled at
default. A back-end could override this hook to return true if it doesn't
have hardware support and want verifier insert zero extension explicitly.
Offload targets do not use this native target hook, instead, they could
get the optimization results using bpf_prog_offload_ops.finalize.
NOTE: arches could have diversified features, it is possible for one arch
to have hardware zero extension support for some sub-register write insns
but not for all. For example, PowerPC, SPARC have zero extended loads, but
not for alu32. So when verifier zero extension insertion enabled, these JIT
back-ends need to peephole insns to remove those zero extension inserted
for insn that actually has hardware zero extension support. The peephole
could be as simple as looking the next insn, if it is a special zero
extension insn then it is safe to eliminate it if the current insn has
hardware zero extension support.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The encoding for this new variant is based on BPF_X format. "imm" field was
0 only, now it could be 1 which means doing zero extension unconditionally
.code = BPF_ALU | BPF_MOV | BPF_X
.dst_reg = DST
.src_reg = SRC
.imm = 1
We use this new form for doing zero extension for which verifier will
guarantee SRC == DST.
Implications on JIT back-ends when doing code-gen for
BPF_ALU | BPF_MOV | BPF_X:
1. No change if hardware already does zero extension unconditionally for
sub-register write.
2. Otherwise, when seeing imm == 1, just generate insns to clear high
32-bit. No need to generate insns for the move because when imm == 1,
dst_reg is the same as src_reg at the moment.
Interpreter doesn't need change as well. It is doing unconditionally zero
extension for mov32 already.
One helper macro BPF_ZEXT_REG is added to help creating zero extension
insn using this new mov32 variant.
One helper function insn_is_zext is added for checking one insn is an
zero extension on dst. This will be widely used by a few JIT back-ends in
later patches in this set.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
eBPF ISA specification requires high 32-bit cleared when low 32-bit
sub-register is written. This applies to destination register of ALU32 etc.
JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and
AArch64 ISA has the same semantics, so the corresponding JIT back-end
doesn't need to do extra work.
However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches
(PowerPC, SPARC etc) need to do explicit zero extension to meet this
requirement, otherwise code like the following will fail.
u64_value = (u64) u32_value
... other uses of u64_value
This is because compiler could exploit the semantic described above and
save those zero extensions for extending u32_value to u64_value, these JIT
back-ends are expected to guarantee this through inserting extra zero
extensions which however could be a significant increase on the code size.
Some benchmarks show there could be ~40% sub-register writes out of total
insns, meaning at least ~40% extra code-gen.
One observation is these extra zero extensions are not always necessary.
Take above code snippet for example, it is possible u32_value will never be
casted into a u64, the value of high 32-bit of u32_value then could be
ignored and extra zero extension could be eliminated.
This patch implements this idea, insns defining sub-registers will be
marked when the high 32-bit of the defined sub-register matters. For
those unmarked insns, it is safe to eliminate high 32-bit clearnace for
them.
Algo:
- Split read flags into READ32 and READ64.
- Record index of insn that does sub-register write. Keep the index inside
reg state and update it during verifier insn walking.
- A full register read on a sub-register marks its definition insn as
needing zero extension on dst register.
A new sub-register write overrides the old one.
- When propagating read64 during path pruning, also mark any insn defining
a sub-register that is read in the pruned path as full-register.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes from a few folks.
- bio and sbitmap before atomic barrier fixes (Andrea)
- Hang fix for blk-mq freeze and unfreeze (Bob)
- Single segment count regression fix (Christoph)
- AoE now has a new maintainer
- tools/io_uring/ Makefile fix, and sync with liburing (me)
* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
tools/io_uring: sync with liburing
tools/io_uring: fix Makefile for pthread library link
blk-mq: fix hang caused by freeze/unfreeze sequence
block: remove the bi_seg_{front,back}_size fields in struct bio
block: remove the segment size check in bio_will_gap
block: force an unlimited segment size on queues with a virt boundary
block: don't decrement nr_phys_segments for physically contigous segments
sbitmap: fix improper use of smp_mb__before_atomic()
bio: fix improper use of smp_mb__before_atomic()
aoe: list new maintainer for aoe driver
nvme-pci: use blk-mq mapping for unmanaged irqs
nvme: update MAINTAINERS
nvme: copy MTFA field from identify controller
nvme: fix memory leak for power latency tolerance
nvme: release namespace SRCU protection before performing controller ioctls
nvme: merge nvme_ns_ioctl into nvme_ioctl
nvme: remove the ifdef around nvme_nvm_ioctl
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
nvme: Fix known effects
nvme-pci: Sync queues on reset
...
|
|
Some functions in here are never called, and others are only called
during __init. Remove the dead code and some dead exports for functions
that don't exist (I'm looking at you of_fdt_get_string!). Mark some
functions with __init so we can throw them away after we boot up and
poke at the FDT blob too.
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove support for the LM3697 from the ti-lmu driver in favor
of a dedicated LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Create a TI LMU common framework for TI LMU devices that share
common features.
Currently the runtime ramp and brightness setting have
been identified as common features with common register settings.
This work is derived from Milo Kims TI LMU MFD code.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Add support for interface mode PHY_INTERFACE_MODE_USXGMII.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce interfaces for ballooning enqueueing and dequeueing of a list
of pages. These interfaces reduce the overhead of storing and restoring
IRQs by batching the operations. In addition they do not panic if the
list of pages is empty.
Cc: Jason Wang <jasowang@redhat.com>
Cc: linux-mm@kvack.org
Cc: virtualization@lists.linux-foundation.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see the file copying or write to the free
software foundation inc
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 12 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.231300438@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this sctp implementation is free software you can redistribute it
and or modify it under the terms of the gnu general public license
as published by the free software foundation either version 2 or at
your option any later version this sctp implementation is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with gnu cc see the file copying if not see
http www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 42 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.683323110@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin st fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 50 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your optional any later version of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075212.713472955@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
is free software you can redistribute it and or modify it under the
terms of the gnu general public license as published by the free
software foundation either version 2 or at your option any later
version [drbd] is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with [drbd] see the
file copying if not write to the free software foundation 675 mass
ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 16 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075212.050796421@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Christoph Hellwig
Lu Baolu
Eric W. Biederman
Sai Praneeth Prakhya
Rafael J. Wysocki
Alexandru Ardelean
Baolin Wang
Pierre-Louis Bossart
Michal Kalderon
Masami Hiramatsu
Steven Rostedt (VMware)
Maxime Chevallier
David Howells
Al Viro
Joel Fernandes (Google)
Paul E. McKenney
Linus Torvalds
Jiong Wang
Stephen Boyd
Dan Murphy
Heiner Kallweit
Nadav Amit
Thomas Gleixner