| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
__ethtool_get_link_ksettings() is exported and called from sysfs
and many drivers. It invokes ethtool_ops->get_link_ksettings
so by our own docs it should be holding netdev lock for ops locked
devices. Looks like commit 2bcf4772e45a ("net: ethtool:
try to protect all callback with netdev instance lock")
missed adding the ops lock here.
There's a number of callers we need to fix up so let's add the
netif_get_link_ksettings() helper first, without any actual
locking changes (this commit is a nop).
Not treating this as a fix because I don't think any driver cares
at this point, but if we want to remove the rtnl_lock protection
this will become critical.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
|
|
Allow callers to easily reference these symbols in code that is built
even when the generic datastore is disabled.
As there are no good default no-op variants of these symbols, do not
provide stubs but require users to have their own fallback handling
using IS_ENABLED(CONFIG_HAVE_GENERIC_VDSO).
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-2-2f79dcd6c78f@linutronix.de
|
|
Backmerging to bring in a build error fix to drm-xe-next.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add a read_snapshot() callback to struct clocksource which returns the
derived clocksource value while also providing the underlying hardware
counter reading and the related clocksource ID.
This allows ktime_get_snapshot_id() to populate new hw_cycles and hw_csid
fields in struct system_time_snapshot.
For clocksources that are derived from an underlying counter (e.g., Hyper-V
TSC page scales TSC to 10MHz, kvmclock scales TSC to 1GHz), this provides
atomic access to both the derived value needed for timekeeping
calculations, and the raw hardware counter needed by consumers like KVM's
master clock and the vmclock PTP driver.
[ tglx: Reworked it slightly ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Assisted-by: Kiro:claude-opus-4.6-1m
Link: https://patch.msgid.link/20260526230635.136914-1-dwmw2@infradead.org
Link: https://patch.msgid.link/20260529195558.202568489@kernel.org
|
|
To prepare for a new PTP IOCTL, which exposes the raw counter value along
with the requested system time snapshot, switch the pre/post time stamp
sampling over to use ktime_get_snapshot_id() and fix up all usage sites.
No functional change intended.
The ptp_vmclock conversion was simplified by David Woodhouse.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260529195558.149589566@kernel.org
|
|
All users are converted to sys_systime.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195558.046694580@kernel.org
|
|
PTP device system crosstime stamps support only CLOCK_REALTIME, which is
meaningless for AUX clocks. The PTP core hands in the clock ID already, so
prepare the core code to honor it.
- Add a new sys_systime field to struct system_device_crosststamp which
aliases the sys_realtime field. Once all users are converted
sys_realtime can be removed.
- Prepare get_device_system_crosststamp() and the related code for it by
switching to sys_systime and providing the initial changes to utilize
different time keepers.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.846634842@kernel.org
|
|
All users have been converted to ktime_get_snapshot_id().
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.795510496@kernel.org
|
|
The normal capture for system/device cross timestamps is CLOCK_REALTIME,
but that's meaningless for AUX clocks.
Add a clock_id field to struct system_device_crosststamp and initialize it
with CLOCK_REALTIME at the two places which prepare for cross
timestamps.
After the related code has been cleaned up, the core code will honor the
clock_id field when calculating the system time from the system counter
snapshot.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.482153523@kernel.org
|
|
An upcoming extension to the PTP IOCTL requires to return the system counter
value and the clocksource ID to user space. get_device_system_crosststamp() has
this information already.
Extend struct system_device_crosststamp with a system_counterval_t member
and fill in the data.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.429406675@kernel.org
|
|
All users are converted over to ktime_get_snapshot_id() and
system_time_snapshot::systime and ::monoraw.
Remove the leftovers.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.330029635@kernel.org
|
|
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section. objtool
explicitly ignores that section and when processing functions in the
kernel, if it detects one that has no references it will seal it to have
its ENDBR stripped on boot up.
This means when a tprobe is attached to the sched_wakeup tracepoint, when it
is triggered it will call __probestub_sched_wakeup and due to the missing
ENDBR on a CFI-enabled machine it will take a #CP exception.
Fix this by adding CFI_NOSEAL annotation to probestub declaration.
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260603153147.573589-1-eva.kurchatova@virtuozzo.com
Fixes: d5173f753750 ("objtool: Exclude __tracepoints data from ENDBR checks")
Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
[ Updated change log ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
lockdep_is_cpus_held() and lockdep_is_cpus_write_held() are undefined when
!CONFIG_HOTPLUG_CPU. This is ok because their few callers protect the calls
with a "if (IS_ENABLED(CONFIG_HOTPLUG_CPU) ..." check.
It is error prone to require callers to protect lockdep_is_cpus_held()
and lockdep_is_cpus_write_held() with an IS_ENABLED(CONFIG_HOTPLUG_CPU)
check while the custom for equivalent functions, for example the more
prevalent lockdep_is_held(), is to not require similar protection.
It is also inconsistent with CPU hotplug lockdep code self since related
call lockdep_assert_cpus_held() does not require protection.
Create stubs for lockdep_is_cpus_held() and lockdep_is_cpus_write_held()
that returns 1 (LOCK_STATE_UNKNOWN/LOCK_STATE_HELD) when !CONFIG_HOTPLUG_CPU.
This makes the CPU hotplug lockdep checks consistent while following
existing lockdep custom. Drop the "extern" from the function declaration
as part of the move to match kernel coding style.
Keep the IS_ENABLED(CONFIG_HOTPLUG_CPU) checks in existing users since
removing them would change the logic of these expressions.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/7484f0b58fd86153d445819cc4e172adba16cff9.1780543665.git.reinette.chatre@intel.com
Closes: https://sashiko.dev/#/patchset/cover.1780456704.git.reinette.chatre%40intel.com?part=1
|
|
It has no callers left, so delete it. Inline __end_buffer_write_sync()
into bh_end_write().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-35-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
This shrinks buffer_head by 8 bytes, letting us pack more buffer heads
per slab. With a Debian config, it shrinks from 104 bytes to 96 bytes
which is 42 objects per 4KiB page rather than 39, a 7% reduction in the
amount of memory used.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-33-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
No users are left; remove this API. Also remove/fix comments mentioning
it, and end_bio_bh_io_sync() as it's now unused.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-32-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
There are no more callers of this function, so delete it.
end_buffer_async_write() then has only one caller left, so
inline it into bh_end_async_write().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-27-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
These are the bio_end_io_t versions of end_buffer_read_sync(),
end_buffer_write_sync() and end_buffer_async_write(). They do not
contain a put_bh() call as it is no longer necessary.
Also add the helper function bio_endio_bh().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-5-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
bh_submit() takes a bio_end_io allowing users to avoid the indirect
function call through bh->b_end_io, and eventually allowing us to remove
bh->b_end_io.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20260528173150.1093780-3-willy@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The IOCB_DONTCACHE writeback path in generic_write_sync() calls
filemap_flush_range() on every write, submitting writeback inline in
the writer's context. Perf lock contention profiling shows the
performance problem is not lock contention but the writeback submission
work itself — walking the page tree and submitting I/O blocks the writer
for milliseconds, inflating p99.9 latency from 23ms (buffered) to 93ms
(dontcache).
Replace the inline filemap_flush_range() call with a flusher kick that
drains dirty pages in the background. This moves writeback submission
completely off the writer's hot path.
To avoid flushing unrelated buffered dirty data, add a dedicated
WB_start_dontcache bit and wb_check_start_dontcache() handler that uses
the per-wb WB_DONTCACHE_DIRTY counter to determine how many pages to
write back. The flusher writes back that many pages from the oldest dirty
inodes (not restricted to dontcache-specific inodes). This helps
preserve I/O batching while limiting the scope of expedited writeback.
Like WB_start_all, the WB_start_dontcache bit coalesces multiple
DONTCACHE writes into a single flusher wakeup without per-write
allocations. Use test_and_clear_bit to atomically consume the kick
request before reading the dirty counter and starting writeback, so that
concurrent DONTCACHE writes during writeback can re-set the bit and
schedule a follow-up flusher run.
Read the dirty counter with wb_stat_sum() (aggregating per-CPU batches)
rather than wb_stat() (which reads only the global counter) to ensure
small writes below the percpu batch threshold are visible to the flusher.
In filemap_dontcache_kick_writeback(), set the WB_start_dontcache bit
inside the unlocked_inode_to_wb_begin/end section for correct cgroup
writeback domain targeting, but defer the wb_wakeup() call until after
the section ends, since wb_wakeup() uses spin_unlock_irq() which would
unconditionally re-enable interrupts while the i_pages xa_lock may still
be held under irqsave during a cgroup writeback switch. Pin the wb with
wb_get() inside the RCU critical section before calling wb_wakeup()
outside it, since cgroup bdi_writeback structures are RCU-freed and the
wb pointer could become invalid after unlocked_inode_to_wb_end() drops
the RCU read lock.
Also add WB_REASON_DONTCACHE as a new writeback reason for tracing
visibility.
dontcache-bench results (same host, T6F_SKL_1920GBF, 251 GiB RAM,
xfs on NVMe, fio io_uring):
Buffered and direct I/O paths are unaffected by this patchset. All
improvements are confined to the dontcache path:
Single-stream throughput (MB/s):
Before After Change
seq-write/dontcache 298 897 +201%
rand-write/dontcache 131 236 +80%
Tail latency improvements (seq-write/dontcache):
p99: 135,266 us -> 23,986 us (-82%)
p99.9: 8,925,479 us -> 28,443 us (-99.7%)
Multi-writer (4 jobs, sequential write):
Before After Change
dontcache aggregate (MB/s) 2,529 4,532 +79%
dontcache p99 (us) 8,553 1,002 -88%
dontcache p99.9 (us) 109,314 1,057 -99%
Dontcache multi-writer throughput now matches buffered (4,532 vs
4,616 MB/s).
32-file write (Axboe test):
Before After Change
dontcache aggregate (MB/s) 1,548 3,499 +126%
dontcache p99 (us) 10,170 602 -94%
Peak dirty pages (MB) 1,837 213 -88%
Dontcache now reaches 81% of buffered throughput (was 35%).
Competing writers (dontcache vs buffered, separate files):
Before After
buffered writer 868 433 MB/s
dontcache writer 415 433 MB/s
Aggregate 1,284 866 MB/s
Previously the buffered writer starved the dontcache writer 2:1.
With per-bdi_writeback tracking, both writers now receive equal
bandwidth. The aggregate matches the buffered-vs-buffered baseline
(863 MB/s), indicating fair sharing regardless of I/O mode.
The dontcache writer's p99.9 latency collapsed from 119 ms to
33 ms (-73%), eliminating the severe periodic stalls seen in the
baseline. Both writers now share identical latency profiles,
matching the buffered-vs-buffered pattern.
The per-bdi_writeback dirty tracking dramatically reduces peak dirty
pages in dontcache workloads, with the 32-file test dropping from
1.8 GB to 213 MB. Dontcache sequential write throughput triples and
multi-writer throughput reaches parity with buffered I/O, with tail
latencies collapsing by 1-2 orders of magnitude.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260511-dontcache-v7-3-2848ddce8090@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add a per-wb WB_DONTCACHE_DIRTY counter that tracks the number of dirty
pages with the dropbehind flag set (i.e., pages dirtied via RWF_DONTCACHE
writes).
Increment the counter alongside WB_RECLAIMABLE in folio_account_dirtied()
when the folio has the dropbehind flag set, and decrement it in
folio_clear_dirty_for_io() and folio_account_cleaned(). Also decrement it
when a non-DONTCACHE lookup atomically clears the dropbehind flag on a
dirty folio in __filemap_get_folio_mpol(), using folio_test_clear_dropbehind()
to prevent concurrent lookups from double-decrementing the counter, and
guarding the decrement with mapping_can_writeback() to match the increment
path.
Transfer the counter alongside WB_RECLAIMABLE in inode_do_switch_wbs() so
that the stat is properly migrated when an inode switches cgroup writeback
domains.
The counter will be used by the writeback flusher to determine how many
pages to write back when expediting writeback for IOCB_DONTCACHE writes,
without flushing the entire BDI's dirty pages.
Suggested-by: Jan Kara <jack@suse.cz>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260511-dontcache-v7-2-2848ddce8090@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add font_data_glyph_buf() to retrieve a character's glyph data or NULL
otherwise. Console fonts can currently contain 256 or 512 glyphs. The
kernel-internal characters are of type char, unsigned short or unsigned
int. Catch all of them by accepting unsigned int. Callers possibly have
to cast from signed to unsigned types to reach all glyphs in a font.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260529140759.529929-2-tzimmermann@suse.de
|
|
arm64: Xilinx SOC changes for 7.2
firmware:
- Add CSU register discovery with sysfs interface
zynqmp_power:
- Fix race condition in event registration
- Fix shutdown and free rx mailbox channel
* tag 'zynqmp-soc-for-7.2' of https://github.com/Xilinx/linux-xlnx:
firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface
Documentation: ABI: add sysfs interface for ZynqMP CSU registers
soc: xilinx: Shutdown and free rx mailbox channel
soc: xilinx: Fix race condition in event registration
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The last user was removed in commit aea12071d6fc
("power/supply: Drop obsolete JZ4740 driver") and replaced by
a self-contained IIO-based driver. No file includes this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://patch.msgid.link/20260515185043.1523363-1-costa.shul@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
|
|
Unlike other models, max17055 doesn't require cell characterization data
and operates on a smaller set of input variables (`DesignCap`, `VEmpty`,
`IChgTerm`, and `ModelCfg`). Those values can be filled in through
`max17042_override_por_values()`, but the refresh bit has to be set
afterward in order to make them apply.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Vincent Cloutier <vincent@cloutier.co>
Link: https://patch.msgid.link/20260406205759.493288-8-vincent.cloutier@icloud.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
No in-tree user still provides `max17042_platform_data` or
`max17042_reg_data`. Move the simple runtime fields into
`struct max17042_chip`, populate them directly from DT or the default
hardware state, and drop the unused public platform-data interface.
While here, write the MAX17047/MAX17050 default `FullSOCThr` value
directly in probe instead of carrying it through an `init_data` table.
Signed-off-by: Vincent Cloutier <vincent@cloutier.co>
Link: https://patch.msgid.link/20260406205759.493288-7-vincent.cloutier@icloud.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
To remove the fixed limit on the number of preserved files per session,
transition the file metadata serialization from a single contiguous
memory block to a chain of linked blocks.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260603154402.468928-11-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Currently, the number of LUO sessions is limited by a fixed number of
pre-allocated pages for serialization (16 pages, allowing for ~819
sessions).
This limitation is problematic if LUO is used to support things such as
systemd file descriptor store, and would be used not just as VM memory
but to save other states on the machine.
Remove this limit by transitioning to a linked-block approach for
session metadata serialization. Instead of a single contiguous block,
session metadata is now stored in a chain of 16-page blocks. Each block
starts with a header containing the physical address of the next block
and the number of session entries in the current block.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260603154402.468928-10-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Introduce a linked-block serialization mechanism for state handover.
Previously, LUO used contiguous memory blocks for serializing sessions
and files, which imposed limits on the total number of items that could
be preserved across a live update.
This commit adds the infrastructure for a more flexible, block-based
approach where serialized data is stored in a chain of linked blocks.
This is a generic KHO serialization block infrastructure that can be
used by multiple subsystems.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260603154402.468928-8-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Entirely remove the LUO FDT wrapper since the FDT only carries the
compatible string and the pointer to the centralized struct luo_ser.
Instead, register the struct luo_ser via the KHO raw subtree
API, placing the compatibility string inside the structure itself.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260603154402.468928-5-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Transition the LUO to ABI v2, which centralizes state management into a
single struct luo_ser header.
Previously, LUO state was spread across multiple FDT properties and
subnodes. ABI v2 simplifies this by placing all core state, including
the liveupdate number and physical addresses for sessions and FLB
headers into a centralized struct luo_ser.
Note that this change introduces a semantic difference: the sessions
and FLB serialization formats are no longer completely independent of
the core LUO. Their metadata (such as physical addresses for sessions
and FLB headers) is now coupled to and managed via the centralized
struct luo_ser.
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260603154402.468928-4-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
The mempool_alloc_bulk was modelled after the alloc_pages_bulk API,
including some misunderstanding of it.
Remove checking for NULL slots in the array, as alloc_pages_bulk and
kmem_cache_alloc_bulk always fill the array from the beginning and thus
we know the offset of the first failing allocation. This removes support
for working well with alloc_pages_bulk used to refill page arrays that
might have an entry removed from in the middle, but that is only used by
sunrpc and hopefully on it's way out.
Also remove the allocated parameter as it is redundant because the caller
can simply specific and offset into the entries array.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260602160038.3976341-1-hch@lst.de
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
The kmem_cache_alloc_bulk return value is weird. It returns the number
of allocated objects, but that must always be 0 or the requested number
based on the implementations and the handling in the callers, but that
assumption is not actually documented anywhere, which confuses automated
review tools.
Fix this by returning a bool if the allocation succeeded and adding a
kerneldoc comment explaining the API.
[rob.clark@oss.qualcomm.com: fixups in
msm_iommu_pagetable_prealloc_allocate() ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> # skbuff
Link: https://patch.msgid.link/20260528093437.2519248-2-hch@lst.de
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
In AP mode, track the BSS non-DBE bandwidth and apply
that to all non-DBE clients, then track OMP updates
from the clients and enable/disable DBE accordingly.
For now don't send a response, clients need to have a
timer anyway (it's up to the driver to set the right
timeout in UHR capabilities.)
Link: https://patch.msgid.link/20260529102644.be84f2b055cc.I4d2c067dfe54c47621d5a872ca07a0e754d6c20f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a UHR AP has DBE enabled, parse the channel and apply it
to the chandef. Apply for TX only after the OMP response (or
timeout) so that the AP doesn't receive frames with DBE width
before the station completed transition to DBE.
Link: https://patch.msgid.link/20260529102644.cb810f212128.Ife37c2673251346e84e4250b242b31f0895520ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are now 8 more reserved bits in D1.4, update the code
accordingly.
Link: https://patch.msgid.link/20260529102644.6e27c54cfceb.Id395c07ffde286011494fc75190dc6060117436e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are new capabilities in D1.4, and some reserved
bits. Update the code accordingly.
Link: https://patch.msgid.link/20260529102644.f146932b21e2.I12bad84157bf809fbe285b79420143b3c456d9d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Define some values needed for UHR link reconfiguration frames,
in particular to prepare for UHR mode change request/handling.
Link: https://patch.msgid.link/20260529102644.03029bae6447.If22b0c1e10d9db712dca408a420469b3d385b4ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are no issues with the PERR processing itself; however, to maintain
consistency with the previous PREQ/PREP code modifications, I will create a
new mesh_path_parse_error_frame() function to separately implement the
frame format validation and the "not supported" check.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-6-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the AF flag is enabled, hwmp_prep_frame_process() overreads orig_addr
by 2 bytes. Since this occurs within the socket buffer, it does not read
across memory boundaries and therefore poses no security risk; however, we
will fix it as a precaution.
In this fix, a new function mesh_path_parse_reply_frame() is established to
separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-5-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the AF flag is enabled, hwmp_preq_frame_process() overreads
target_addr by 2 bytes. Since this occurs within the socket buffer, it does
not read across memory boundaries and therefore poses no security risk;
however, we will fix it as a precaution.
In this fix, a new function mesh_path_parse_request_frame() is established
to separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-4-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The existing PERR_IE_* macros access HWMP PERR frame fields via hardcoded
byte offsets. Each PERR destination entry contains an optional 6-byte AE
(Address Extension) address followed by a reason code, making offset-based
access error-prone.
Introduce typed packed C structs to represent the PERR frame layout:
- ieee80211_mesh_hwmp_perr: top-level frame containing TTL and
destination count
- ieee80211_mesh_hwmp_perr_dst: per-destination entry with optional AE
address and variable-position reason code
Add ieee80211_mesh_hwmp_perr_get_rcode() to locate the reason code in
each destination entry depending on whether the AE flag is set.
This refactoring makes the PERR processing code consistent with the
struct-based approach adopted for PREQ and PREP in preceding patches.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-3-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The existing PREP_IE_* macros access HWMP PREP frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, making the offset arithmetic error-prone.
Introduce typed packed C structs to represent the PREP frame layout:
- ieee80211_mesh_hwmp_prep_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_prep_bottom: fields after the optional AE address
Add ieee80211_mesh_hwmp_prep_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
orig_addr in hwmp_prep_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-2-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The existing PREQ_IE_* macros access HWMP PREQ frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, and the macros handle this with conditional
arithmetic (e.g., AE_F_SET(x) ? x + N+6 : x + N). This approach
obscures the frame layout and is prone to miscalculation.
Introduce typed packed C structs to represent the PREQ frame layout:
- ieee80211_mesh_hwmp_preq_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_preq_bottom: fields after the optional AE address
- ieee80211_mesh_hwmp_preq_target: per-target fields
Add ieee80211_mesh_hwmp_preq_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
target_addr in hwmp_preq_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-1-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the FUTEX_ROBUST_UNLOCK mechanism is used for unlocking (PI-)futexes,
then the unlock sequence in user space looks like this:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = gettid();
3) if (atomic_try_cmpxchg(&mutex->lock, lval, 0))
4) robust_list_clear_op_pending();
else
5) sys_futex(OP | FUTEX_ROBUST_UNLOCK, ....);
That still leaves a minimal race window between #3 and #4 where the mutex
could be acquired by some other task, which observes that it is the last
user and:
1) unmaps the mutex memory
2) maps a different file, which ends up covering the same address
When then the original task exits before reaching #5 then the kernel robust
list handling observes the pending op entry and tries to fix up user space.
In case that the newly mapped data contains the TID of the exiting thread
at the address of the mutex/futex the kernel will set the owner died bit in
that memory and therefore corrupt unrelated data.
On X86 this boils down to this simplified assembly sequence:
mov %esi,%eax // Load TID into EAX
xor %ecx,%ecx // Set ECX to 0
#3 lock cmpxchg %ecx,(%rdi) // Try the TID -> 0 transition
.Lstart:
jnz .Lend
#4 movq %rcx,(%rdx) // Clear list_op_pending
.Lend:
If the cmpxchg() succeeds and the task is interrupted before it can clear
list_op_pending in the robust list head (#4) and the task crashes in a
signal handler or gets killed then it ends up in do_exit() and subsequently
in the robust list handling, which then might run into the unmap/map issue
described above.
This is only relevant when user space was interrupted and a signal is
pending. The fix-up has to be done before signal delivery is attempted
because:
1) The signal might be fatal so get_signal() ends up in do_exit()
2) The signal handler might crash or the task is killed before returning
from the handler. At that point the instruction pointer in pt_regs is
not longer the instruction pointer of the initially interrupted unlock
sequence.
The right place to handle this is in __exit_to_user_mode_loop() before
invoking arch_do_signal_or_restart() as this covers obviously both
scenarios.
As this is only relevant when the task was interrupted in user space, this
is tied to RSEQ and the generic entry code as RSEQ keeps track of user
space interrupts unconditionally even if the task does not have a RSEQ
region installed. That makes the decision very lightweight:
if (current->rseq.user_irq && within(regs, csr->unlock_ip_range))
futex_fixup_robust_unlock(regs, csr);
futex_fixup_robust_unlock() then invokes a architecture specific function
to return the pending op pointer or NULL. The function evaluates the
register content to decide whether the pending ops pointer in the robust
list head needs to be cleared.
Assuming the above unlock sequence, then on x86 this decision is the
trivial evaluation of the zero flag:
return regs->eflags & X86_EFLAGS_ZF ? regs->dx : NULL;
Other architectures might need to do more complex evaluations due to LLSC,
but the approach is valid in general. The size of the pointer is determined
from the matching range struct, which covers both 32-bit and 64-bit builds
including COMPAT.
The unlock sequence is going to be placed in the VDSO so that the kernel
can keep everything synchronized, especially the register usage. The
resulting code sequence for user space is:
if (__vdso_futex_robust_list$SZ_try_unlock(lock, tid, &pending_op) != tid)
err = sys_futex($OP | FUTEX_ROBUST_UNLOCK,....);
Both the VDSO unlock and the kernel side unlock ensure that the pending_op
pointer is always cleared when the lock becomes unlocked.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.773669210@kernel.org
|
|
There will be a VDSO function to unlock robust futexes in user space. The
unlock sequence is racy vs. clearing the list_pending_op pointer in the
tasks robust list head. To plug this race the kernel needs to know the
instruction window. As the VDSO is per MM the addresses are stored in
mm_struct::futex.
Architectures which implement support for this have to update these
addresses when the VDSO is (re)mapped and indicate the pending op pointer
size which is matching the IP.
Arguably this could be resolved by chasing mm->context->vdso->image, but
that's architecture specific and requires to touch quite some cache
lines. Having it in mm::futex reduces the cache line impact and avoids
having yet another set of architecture specific functionality.
To support multi size robust list applications (gaming) this provides two
ranges when COMPAT is enabled.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.718926819@kernel.org
|
|
The upcoming support for unlocking robust futexes in the kernel requires
store release semantics. Syscalls do not imply memory ordering on all
architectures so the unlock operation requires a barrier.
This barrier can be avoided when stores imply release like on x86.
Provide a generic version with a smp_mb() before the unsafe_put_user(),
which can be overridden by architectures.
Provide also a ARCH_MEMORY_ORDER_TSO Kconfig option, which can be selected
by architectures with Total Store Order (TSO), where store implies release,
so that the smp_mb() in the generic implementation can be avoided.
If that is set a barrier() is used instead of smp_mb(), which is not
required for the use case at hand, but makes it future proof for other
usage to prevent the compiler from reordering.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.513181528@kernel.org
|
|
Having all these members in mm_struct along with the required #ifdeffery is
annoying, does not allow efficient initializing of the data with
memset() and makes extending it tedious.
Move it into a data structure and fix up all usage sites.
The extra struct for the private hash is intentional to make integration of
other conditional mechanisms easier in terms of initialization and separation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260602090535.407756793@kernel.org
|
Jakub Kicinski
Linus Torvalds
Thomas Weißschuh
Thomas Hellström
David Woodhouse
Thomas Gleixner
Eva Kurchatova
Reinette Chatre
Matthew Wilcox (Oracle)
Jeff Layton
Thomas Zimmermann
Linus Walleij
Costa Shulyupin
Dave Airlie
Sebastian Krzyszkowiak
Vincent Cloutier
Pasha Tatashin
Christoph Hellwig
Johannes Berg
Masashi Honma