| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some PHYs support direct C45 register access but not C22 indirect MMD
access (registers 0xD and 0xE). When discovered via C22, phylib routes
MMD access through the indirect path, which won't work on these
devices.
Add genphy_read_mmd_c45() and genphy_write_mmd_c45() as read_mmd/
write_mmd callbacks that bypass the C22 indirect path and use the bus
C45 accessors directly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-10-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add macro defines for the CONFIG2 register and the MMS1 memory map.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-9-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Open Alliance TC6 standard defines multiple memory maps for the
MAC-PHY's register space. These are used to separate standard, vendor
and PHY MMD specific registers. Define register access functions that
allow the caller to specify the MMS.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-7-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The OA TC6 standard registers are currently exported in a header file.
Add the OA_TC6_ prefix to the register address and subfield mask macros
to avoid future naming conflicts.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-6-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move defines for standard Open Alliance TC6 register addresses and
subfields in the oa_tc6's header. As such, other ethernet drivers
that rely on oa_tc6 can use them directly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-5-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The C45 access functions can still be used by some Ethernet drivers
which set the OA_TC6_BROKEN_PHY flag. Export them.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-4-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some MAC-PHY devices need custom MDIO bus access functions to work
around hardware issues. Add the OA_TC6_BROKEN_PHY quirk flag so drivers
can opt in to skip oa_tc6's internal PHY init and manage the PHY
themselves. When the flag is set, oa_tc6 skips MDIO bus registration,
PHY discovery and PHY connection, leaving these to the driver.
Drivers that do not set the flag retain the existing behavior. Update
lan865x and the framework documentation accordingly.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-3-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor.
Link: https://lore.kernel.org/20260710154318.75388-1-qi.zheng@linux.dev
Fixes: f304652609ea ("mm: vmscan: prepare for reparenting MGLRU folios")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/5A9E929D82717101+12fcf643-efb8-4b9a-a53a-1e28cc894f0b@smail.nju.edu.cn
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull misc fixes from Andrew Morton:
"12 hotfixes. 8 are cc:stable and the remainder address post-7.1 issues
or aren't considered appropriate for backporting. 10 are for MM.
All are singletons - please see the relevant changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-20-11-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: trace: change memory_failure_event to ras subsystem
mm: page_reporting: allow driver to set batch capacity
mm/kmemleak: fix checksum computation for per-cpu objects
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
MAINTAINERS: add Usama as a THP reviewer
fat: avoid stack overflow warning
mm/damon/core: validate ranges in damon_set_regions()
m68k: avoid -Wunused-but-set-parameter in clear_user_page()
mm/huge_memory: set PG_has_hwpoisoned only after new folio head is established
mm/page_vma_mapped: fix device-private PMD handling
MAINTAINERS: s/SeongJae/SJ/
userfaultfd: prevent registration of special VMAs
|
|
In HFS+ filesystems, during b-tree open (hfs_btree_open()), the code
verifies that the allocation map bit for the tree header (node 0) is
set. If not, it indicates a corrupted map record/bitmap and mounts
the volume as read-only (SB_RDONLY) to prevent further damage.
HFS filesystems share the same b-tree structure but currently lack
this corruption detection check.
Port this check to HFS, aligning its implementation with HFS+ to
maintain consistent b-tree logic across both filesystems:
1. Define struct hfs_bmap_ctx, and define HFS_TREE_HEAD and the relevant
map record indices in include/linux/hfs_common.h.
2. Port the necessary offset and length validation helpers to
fs/hfs/btree.h as static inline functions with robust null pointer
checks.
3. Implement static hfs_bmap_get_map_page() in fs/hfs/btree.c.
4. Implement static hfs_bmap_test_bit() in fs/hfs/btree.c to inspect
the B-tree bitmap using the get_map_page helper.
5. Implement static hfs_bmap_clear_bit() in fs/hfs/btree.c.
6. Rewrite hfs_bmap_alloc() in fs/hfs/btree.c to use the unified
hfs_bmap_get_map_page() helper, eliminating redundant page and offset
calculation code.
7. Refactor hfs_bmap_free() in fs/hfs/btree.c to use the new
hfs_bmap_clear_bit() helper.
8. In hfs_btree_open(), retrieve the header node via hfs_bnode_find(),
test its allocation bit with hfs_bmap_test_bit(), and release it
using hfs_bnode_put().
Suggested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/all/6a36101b.be22b350.2a3e9.0001.GAE@google.com/T/#r446d0fed2a2900bd805534bbcb799d86619ae2ea
Signed-off-by: Aditya Prakash Srivastava <aditya.ansh182@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260716074150.1660-1-aditya.ansh182@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
The return values of syscall_enter_from_user_mode[_work]() are
non-intuitive. Both functions return the syscall number which should be
invoked by the architecture specific syscall entry code. The returned
number can be:
- the unmodified syscall number which was handed in by the caller
- a modified syscall number (ptrace, seccomp, trace/probe/bpf)
That has an additional twist. If the return value is -1L then the caller is
not allowed to modify the return value as that indicates that the modifying
entity requests to abort the syscall and set the return value already. That
can obviously not be differentiated from a syscall which handed in -1 as
syscall number.
The most trivial way to deal with that is:
set_return_value(regs, -ENOSYS);
nr = syscall_enter_from_user_mode(regs, nr);
if (valid(nr))
handle_syscall(regs, nr);
That's what LOONGARCH, RISCV, and X86 do. But PowerPC and S390 do not
preset the return value, so when user space hands in -1 and there is
nothing setting the return value in the entry work code, then the syscall
is skipped but the return value is whatever random data has been in the
return value register.
Change the return values of syscall_enter_from_user_mode[_work]() to
boolean and return false, when either ptrace or seccomp request to skip the
syscall. If they return true, update the syscall number as it might have
been changed.
That results in slightly different behaviour of the architectures versus
tracing.
If the syscall tracepoint has probe/BPF attached, those might set the
syscall number to -1 and also set the return value. PowerPC and S390 will
then overwrite that value with -ENOSYS. The other architectures will just
ignore it like any other invalid syscall and use the modified one.
Originally-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Link: https://patch.msgid.link/20260712141346.772209074@kernel.org
|
|
This prepares for changing the return types of
syscall_enter_from_user_mode[_work]() to bool, which in turn separates the
decision of invoking the syscall from the syscall number, which might have
been changed in the call by ptrace, seccomp, tracing.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.699072205@kernel.org
|
|
Reread the syscall number from pt_regs and stop returning the eventually
modified syscall number.
That moves the reread to the end of syscall_trace_enter() and prepares for
moving it to the call site.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.639115923@kernel.org
|
|
Move it out of line and let it reread the syscall number on it's own. That
makes the low level entry code denser and allows to move the reread to the
call site of syscall_trace_enter() once the tracer is fixed up.
To prevent the compiler from putting audit_context() out of line and
thereby breaking dead code elimination, mark audit_context()
__always_inline.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.576865340@kernel.org
|
|
phucduc.bui@gmail.com <phucduc.bui@gmail.com> did a bit of work to help
people avoid running into silly errors.
Link: https://patch.msgid.link/20260720033238.52479-1-phucduc.bui@gmail.com
|
|
blk_crypto_config_supported() is no longer called, so remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
fscrypt_finalize_bounce_page() is no longer called, so remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Update the comment for SB_INLINECRYPT to match the latest code, where
SB_INLINECRYPT now controls whether blk-crypto uses inline encryption
hardware rather than whether blk-crypto is used.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Now that fscrypt always uses blk-crypto on block-based filesystems,
there's no meaningful difference between bio.c and inline_crypt.c.
Therefore merge the two files into one named block.c.
Note: I didn't carry over bio.c's "Copyright (C) 2015, Motorola
Mobility", as none of the code that applied to remained.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove functions that are no longer used:
- fscrypt_decrypt_bio()
- fscrypt_decrypt_pagecache_blocks()
- fscrypt_inode_uses_fs_layer_crypto()
- fscrypt_inode_uses_inline_crypto()
- fscrypt_enqueue_decrypt_work()
This makes the decryption workqueue unused, so remove it too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
On block-based filesystems, fscrypt file contents encryption is now
always implemented using blk-crypto. This implementation supports
direct I/O.
Therefore, fscrypt_dio_supported() now always returns true, except in
the edge case where statx(STATX_DIOALIGN) is called on an encrypted
regular file that hasn't had its key set up. But that was really a
workaround rather than the desired behavior, so we can disregard it.
Thus, fscrypt_dio_supported() is no longer needed. Remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
For encrypting and decrypting file contents on block-based filesystems
(i.e., ext4 and f2fs, but not ceph and ubifs), always use blk-crypto
instead of fs-layer crypto (direct use of crypto_skcipher).
Since the blk-crypto API provides a fallback to CPU-based encryption,
it's all that's needed on block-based filesystems. The support for two
alternative block-based file contents encryption implementations,
fs-layer and blk-crypto, existed mainly for historical reasons, as the
fs-layer path came first. Some of it is also still needed for the
non-block-based filesystems, but a lot of it isn't.
Removing the duplicate fs-layer code paths greatly simplifies the code,
most of which is done in later commits.
Specific implementation details:
- SB_INLINECRYPT now controls whether blk_crypto_config::allow_hw is set
to true, instead of whether blk-crypto is used at all. The effect is
that the semantics are preserved: the inlinecrypt mount option selects
the use of inline encryption hardware instead of the CPU.
- Set up a blk_crypto_key iff the file is a regular file on a
block-based filesystem. To determine whether the filesystem is
block-based, add a bit fscrypt_operations::is_block_based.
- Remove fscrypt_select_encryption_impl(). Move the logging logic that
was previously there into fscrypt_prepare_inline_crypt_key(). Note
that blk_crypto_config_supported() is no longer needed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
fscrypt uses inline encryption hardware only when the "inlinecrypt"
mount option is given. I'd like to keep that behavior even after
standardizing on the blk-crypto API for file contents encryption. That
is, the default should continue to be the well-tested CPU-based
encryption code, and the use of inline encryption hardware should
continue to be an opt-in feature for systems where it's beneficial and
has been fully validated (including verifying ciphertext correctness).
To support this use case, extend blk_crypto_config with a new flag
BLK_CRYPTO_CFG_ALLOW_HW.
For now it's always set. Later commits will change that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls
fscrypt_get_devices() to get the filesystem's list of block devices,
then iterates over them and calls blk_crypto_config_supported(),
blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one.
Currently, the block device pointers are placed in a dynamically
allocated array. This dynamic allocation is problematic because:
- It can fail, especially at the fscrypt_destroy_inline_crypt_key() call
site when it's invoked for inode eviction under direct reclaim.
- fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It
just zeroizes and frees the blk_crypto_key without calling
blk_crypto_evict_key(). That causes a use-after-free.
For now, let's fix this in the straightforward and easily-backportable
way by switching to an on-stack array. Currently the fscrypt
multi-device functionality is used only by f2fs, which has a hardcoded
limit of 8 block devices. An on-stack array works fine for that.
(Of course, this solution won't scale up to large number of block
devices. For that we'd need a different solution, like moving the block
device iteration into the filesystem. Or in the case of btrfs, which
will only support blk-crypto-fallback, we should make it just call
blk-crypto-fallback directly, so the block devices won't be needed.)
Fixes: 22e9947a4b2b ("fscrypt: stop holding extra request_queue references")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260713023708.9245-1-ebiggers%40kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260719055602.78828-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Replace all remaining calls to mutex_lock() and mutex_unlock() in
fs/crypto/ with lock guards. No functional change.
Link: https://patch.msgid.link/20260618184852.3469301-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Use the struct keyword when describing a struct. Without that, the
type defaults to function.
Warning: ./include/linux/posix-timers_types.h:40 cannot understand
function prototype: 'struct posix_cputimer_base'
Warning: ./include/linux/posix-timers_types.h:55 cannot understand
function prototype: 'struct posix_cputimers'
Warning: ./include/linux/posix-timers_types.h:67 cannot understand
function prototype: 'struct posix_cputimers_work'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-2-rdunlap@infradead.org
|
|
Use the struct keyword when describing a struct.
Add missing kernel-doc for @it_pid_type.
Warning: ./include/linux/posix-timers.h:58 cannot understand
function prototype: 'struct cpu_timer'
Warning: ./include/linux/posix-timers.h:222 struct member
'it_pid_type' not described in 'k_itimer'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-1-rdunlap@infradead.org
|
|
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc4).
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sub-schedulers don't get cgroups yet: every task_group is inited on the root
sched and the routing added by the previous patches always resolves to it.
Add the handover: an enabling sub-scheduler takes over the cgroups in its
subtree and a disabling one returns them to its parent.
scx_cgroup_claim_subtree() runs while the sub enables, after the subtree's
cgrp->scx_sched's are set and before any task is claimed. It inits each
subtree task_group on the sub, exits it from the parent and updates
tg->scx.sched. A failed ops.cgroup_init() unwinds the sub-side inits and
aborts the enable with the parent untouched.
Disabling reverses it with scx_cgroup_return_subtree(): exit each cgroup
from the sub, then re-init it on the parent with the current tg->scx.*
values, resyncing weight and bandwidth changes made while the sub had it.
When a re-init fails, the parent is failed and the remaining task_groups
still transfer uninited and get no cgroup ops - the same punting done for
tasks. The dying parent's own disable moves them onward.
The handover walks include dying but not yet offlined task_groups, the same
as root's bulk walks: a removed cgroup keeps hosting scheduling events until
its dying tasks finish their final context switches, and its
ops.cgroup_exit() must follow the last of them. tg on/offlining is excluded
through cgroup_lock(), so either ordering against an rmdir of a subtree
cgroup delivers balanced init/exit pairs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
With sub-schedulers claiming cgroup subtrees, cgroup ops must be delivered
to each task_group's sched rather than always to root. Add tg->scx.sched to
track which sched initialized the task_group. It is set and cleared together
with SCX_TG_INITED.
Deliver the ops accordingly:
- ops.cgroup_exit() goes to the sched whose ops.cgroup_init() it pairs with.
- ops.cgroup_prep_move/move/cancel_move() go to the task's sched, and only
for moves that don't re-home the task. A re-homing move is reported
through the ops.exit_task/init_task() pair instead. The cgroups passed to
the move ops can be outside the sched's inited set as the cpu controller
can be coarser than the sub-scheduler topology.
- Knobs of a cgroup belong to the parent, so ops.set_weight/idle/bandwidth()
go to the parent task_group's sched.
All task_groups currently resolve to the root sched, so no behavior changes
until sub-schedulers start claiming cgroups.
While at it, scx_cgroup_init() is restructured so both paths share the
recording.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
A subsystem can attach to the cgroup hierarchy itself, independent of which
controllers are enabled where - BPF hooks already behave this way and
sched_ext sub-schedulers do too. Controller callbacks can't track task
migrations for them: sched_ext must re-home a task whose migration crosses a
sub-scheduler boundary, but the cpu controller's attach callbacks fire only
when the task_group changes and miss moves whenever the controller topology
is coarser than the sub-scheduler topology.
Add cgroup_task_notifier with per-task migration events mirroring the
can_attach/attach/cancel_attach phases so that a consumer which prepares
per-task state can also veto a migration: CGROUP_TASK_MIGRATING fires
pre-commit, CGROUP_TASK_MIGRATED post-commit and
CGROUP_TASK_MIGRATE_CANCELED unwinds a failed migration. Only migrations
that change a task's dfl cgroup are reported.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map().
Fixes: 7bdbf7446305 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260715141122.15783-4-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Pull to receive:
477869bfafea ("sched_ext: Reject setting disallow from init_task outside the enable path")
5f8b69642d18 ("sched_ext: Take cgroup_lock() first in scx_cgroup_lock()")
8c13364db9c9 ("sched_ext: Skip sub-disable teardown for never-linked sub-schedulers")
5cdc92859809 ("sched_ext: Don't enable non-ext tasks in the sub-sched task loops")
as dependencies for the upcoming cgroup migration patchset and to
resolve the conflicts with the ext.c/sub.c split on for-7.3.
5f8b69642d18 comments scx_cgroup_lock() which for-7.3 exported for
sub.c. Resolved by keeping the exported version with the comment.
8c13364db9c9 and 5cdc92859809 patch the pre-split sub-sched enable and
disable paths in ext.c which for-7.3 moved to sub.c. Resolved by
applying the never-linked teardown skip and the class gates to sub.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The p->scx.disallow revert assumes the root enable path, where the switching
loop reads the reverted policy right afterwards and leaves the task off SCX.
The sub-scheduler disable path also reaches it when re-initializing the
returned tasks on a root parent. Nothing reads the policy there: the task is
enabled on root anyway and keeps running on the ext class with a silently
rewritten policy.
Kill the sched instead, matching the fork and non-root branches, and update
the disallow documentation, which equated !fork with the load path and
pointed at a stale debugfs path for nr_rejected.
Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The functions ata_eh_qc_complete() and ata_eh_qc_retry() are used only in
libata-eh.c. So remove the declaration of these functions from
include/linux/libata.h and define them as static. While at it, add a
missing blank line between variable declaration and code in these two
functions.
No functional changes intended.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND MODIFY ZONES command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_MODIFY_ZONES with the new function
ata_scsi_remove_element_and_modify_zones_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set, and the target device being a ZAC zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the RESTORE ELEMENTS AND REBUILD command
(SERVICE ACTION IN command with service action
SAI_RESTORE_ELEMENTS_AND_REBUILD) into the ATA command
ATA_CMD_RESTORE_ELEMENTS_AND_REBUILD with the new function
ata_scsi_restore_elements_and_rebuild_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP_RESTORE being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND TRUNCATE command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_TRUNCATE) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_TRUNCATE with the new function
ata_scsi_remove_element_and_truncate_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the GET PHYSICAL ELEMENT STATUS command
(SERVICE ACTION IN command with service action
SAI_GET_PHYSICAL_ELEMENT_STATUS) into the ATA command
ATA_CMD_GET_PHYS_ELEMENT_STATUS with the new function
ata_scsi_get_phys_element_status_xlat(). The reply of this function also
needs translation from little endian to big endian. This is done with the
completion callback ata_scsi_get_phys_element_status_complete().
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modified
to correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Introduce the device flags ATA_DFLAG_DEPOP to indicate support by a device
for the basic commands of the storage element depopulation feature set,
that is, the GET PHYSICAL ELEMENT STATUS and REMOVE ELEMENT AND TRUNCATE
commands. The device flag ATA_DFLAG_DEPOP_RESTORE flag is introduced to
indicate support for the RESTORE ELEMENTS AND REBUILD command. Both flags
are obtained from the command support bits of the qword at bytes 152 to
159 of the supported capabilities log page.
For ZAC devices, the device flag ATA_DFLAG_DEPOP_MODIFY is introduced to
indicate support for the REMOVE ELEMENT AND MODIFY ZONES command. This
support is indicated by the REMOVE ELEMENT AND MODIFY ZONES SUPPORTED bit
in the qword at byte 8 to 15 of the zoned device information log page.
The function ata_dev_config_depop() is introduced to set these flags
based on the content of the supported capabilities log and zoned device
information log. As per the ACS specifications, NCQ autosense support is
also mandatory if these flags are set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
The flags field of struct ata_device has the unsigned long type. Define
all the ATA_DFLAG_XXX flags using a 1UL bit shift to match this type, thus
avoiding flags to become signed values (e.g. for bit 31 flag).
To avoid all other values defined in the same enum as the ATA_DFLAG_XXX
flags to implicitly also become unsigned long values, move the device
flags definition to a separate enum.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from Wireless, IPsec, Netfilter and Bluetooth.
Current release - new code bugs:
- netfilter: flowtable: use correct direction to set up tunnel route
Previous releases - regressions:
- wifi:
- mac80211:
- free AP_VLAN bc_buf SKBs outside IRQ lock
- defer link RX stats percpu free to RCU
- fix double free on alloc failure
- cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
- ipv4: free fib_alias with kfree_rcu() on insert error path
- sched: act_tunnel_key: Defer dst_release to RCU callback
- xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
- bluetooth: fix locking in unpair_device/disconnect_sync
- can: add locking for raw flags bitfield
- openvswitch: reject oversized nested action attrs
- eth:
- bnxt_en: handle partially initialized auxiliary devices
- ppp: defer channel free to an RCU grace period to fix UAF
Previous releases - always broken:
- netfilter: xt_nat: reject unsupported target families
- wifi:
- brcmfmac: fix heap overflow on a short auth frame
- cfg80211: add missing FTM API validation
- xfrm:
- reject optional IPTFS templates in outbound policies
- policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
- bluetooth: revalidate LOAD_CONN_PARAM queued update
- can: fix lockless bound/ifindex race and silent RX_SETUP failure
- eth: mlx5: free mlx5_st_idx_data on final dealloc"
* tag 'net-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
llc: fix SAP refcount leak when creating incoming sockets
selftests: netconsole: only restore MAC when it changed on resume
bnxt_en: Handle partially initialized auxiliary devices
sctp: fix auth_hmacs array size in struct sctp_cookie
net/sched: act_tunnel_key: Defer dst_release to RCU callback
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
tcp: fix TIME_WAIT socket reference leak on PSP policy failure
net/mlx5: free mlx5_st_idx_data on final dealloc
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
...
|
|
Defining a static array in a header results in each .c file that
includes the header (here: drivers/memory/omap-gpmc.c and
drivers/mtd/nand/raw/omap2.c) to contain a copy of that array when
compiled to an object file.
With sizeof(struct of_device_id[3]) ≥ 588 having omap_nand_ids[] twice
just to do two string comparisons is quite some bloat. So move
omap_nand_ids[] to the nand driver which actually needs that array for
its module meta data and do the compatible check by hand.
bloat-o-meter reports for drivers/memory/omap-gpmc.o (ARCH=arm):
add/remove: 1/2 grow/shrink: 1/0 up/down: 28/-588 (-560)
Function old new delta
gpmc_probe_generic_child 2108 2136 +28
omap_nand_ids 588 - -588
Total: Before=18114, After=17554, chg -3.09%
(drivers/mtd/nand/raw/omap2.o doesn't change).
This allows to drop <linux/mod_devicetable.h> from
include/linux/platform_data/mtd-nand-omap2.h (which is my original
motivation for this change). Note that this header isn't needed in the
two drivers because omap-gpmc.c doesn't use any device id struct and for
the nand driver omap2.c of_device_id is already provided via
<linux/platform_device.h>.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
QPIC v1.5 requires using the OP_PAGE_READ_ONFI_READ command, but is missing
the rest of the hardware changes that are currently covered by the QPIC v2
(qpic_version2) check in the driver. Split that into an extra
has_onfi_read_op feature flag so it can be separately enabled.
No functional change.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The header itself also includes <linux/types.h> and additional to that
doesn't make use of any symbol defined (transitively) by
<linux/mod_devicetable.h>. Also the .c files that include that header
don't need it (there is no direct include, only via <linux/greybus.h>):
$ git grep -l greybus\\.h | xargs grep -E "\<(acpi_device_id|amba_id|ap_device_id|apr_device_id|auxiliary_device_id|bcma_device_id|ccw_device_id|cdx_device_id|coreboot_device_id|css_device_id|dfl_device_id|dmi_(device|system)_id|eisa_device_id|fsl_mc_device_id|hda_device_id|hid_device_id|hv_vmbus_device_id|i2c_device_id|i3c_device_id|ieee1394_device_id|input_device_id|ipack_device_id|isapnp_device_id|ishtp_device_id|mcb_device_id|mdio_device_id|mei_cl_device_id|mhi_device_id|mips_cdmm_device_id|of_device_id|parisc_device_id|pci_device_id|pci_epf_device_id|pcmcia_device_id|platform_device_id|pnp_(card_)?device_id|rio_device_id|rpmsg_device_id|sdio_device_id|sdw_device_id|serio_device_id|slim_device_id|spi_device_id|spmi_device_id|ssam_device_id|ssb_device_id|tb_service_id|tee_client_device_id|typec_device_id|ulpi_device_id|usb_device_id|vchiq_device_id|virtio_device_id|wmi_device_id|x86_(cpu|device)_id|zorro_device_id|cpu_feature)\>"
drivers/greybus/es2.c:static const struct usb_device_id id_table[] = {
drivers/greybus/es2.c: const struct usb_device_id *id)
drivers/greybus/gb-beagleplay.c:static const struct of_device_id gb_beagleplay_of_match[] = {
drivers/staging/greybus/arche-platform.c:static const struct of_device_id arche_platform_of_match[] = {
drivers/greybus/es2.c includes <linux/usb.h>,
drivers/greybus/gb-beagleplay.c includes <linux/serdev.h> which provides
of_device_id via <linux/device.h>, similar
drivers/staging/greybus/arche-platform.c includes
<linux/platform_device.h> which also provides of_device_id.
So the #include can go away without further adaption.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/80964227feede2d8f1978f13f4219fcf9e63d8d0.1783354012.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement IOCTL interface for SB-TSI driver to enable userspace access
to TSI register read/write operations through the AMD Advanced Platform
Management Link (APML) protocol.
Add an ioctl command (SBTSI_IOCTL_REG_XFER_CMD) that accepts a register
address, data byte, and direction flag.
The mutex is taken on the ioctl path here; the hwmon path is placed
under the same lock in the next patch, which completes serialization between
the hwmon and ioctl paths.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Link: https://patch.msgid.link/20260710111642.850022-7-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AMD SB-TSI temperature sensors can be accessed over both
I2C and I3C buses depending on the platform configuration.
Extend the SB-TSI driver to support both I2C and I3C bus interfaces
by selecting the appropriate transport based on the probed bus type.
The driver maintains backward compatibility with existing I2C
deployments while enabling support for systems using the I3C bus.
Register both I2C and I3C drivers using module_i3c_i2c_driver() and
update the Kconfig dependency from I2C to I3C_OR_I2C.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Link: https://patch.msgid.link/20260710111642.850022-6-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Ciprian Regus
Qi Zheng
Linus Torvalds
Aditya Prakash Srivastava
Thomas Gleixner
Mark Brown
Eric Biggers
Randy Dunlap
Steffen Persvold
Paolo Abeni
Tejun Heo
Leon Hwang
Damien Le Moal
Kumar Kartikeya Dwivedi
Uwe Kleine-König (The Capable Hub)
Stephan Gerhold
Prathima