aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/include/net/act_api.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+2
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-18net sched: fix reporting the first-time use timestampRoman Mashak1-1/+2
When a new action is installed, firstuse field of 'tcf_t' is explicitly set to 0. Value of zero means "new action, not yet used"; as a packet hits the action, 'firstuse' is stamped with the current jiffies value. tcf_tm_dump() should return 0 for firstuse if action has not yet been hit. Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15net: sched: implement terse dump support in actVlad Buslov1-1/+1
Extend tcf_action_dump() with boolean argument 'terse' that is used to request terse-mode action dump. In terse mode only essential data needed to identify particular action (action kind, cookie, etc.) and its stats is put to resulting skb and everything else is omitted. Implement tcf_exts_terse_dump() helper in cls API that is intended to be used to request terse dump of all exts (actions) attached to the filter. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: sched: expose HW stats types per action used by driversJiri Pirko1-0/+2
It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: sched: rename more stats_typesJakub Kicinski1-3/+3
Commit 53eca1f3479f ("net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*") renamed just the flow action types and helpers. For consistency rename variables, enums, struct members and UAPI too (note that this UAPI was not in any official release, yet). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08sched: act: allow user to specify type of HW stats for a filterJiri Pirko1-0/+4
Currently, user who is adding an action expects HW to report stats, however it does not have exact expectations about the stats types. That is aligned with TCA_ACT_HW_STATS_TYPE_ANY. Allow user to specify the type of HW stats for an action and require it. Pass the information down to flow_offload layer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net/sched: actions: remove unused 'order'Davide Caratti1-1/+0
after commit 4097e9d250fb ("net: sched: don't use tc_action->order during action dump"), 'act->order' is initialized but then it's no more read, so we can just remove this member of struct tc_action. CC: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: update action implementations to support flagsVlad Buslov1-1/+6
Extend struct tc_action with new "tcfa_flags" field. Set the field in tcf_idr_create() function and provide new helper tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags value. Update individual hardware-offloaded actions init() to pass their "flags" argument to new helper in order to skip percpu stats allocation when user requested it through flags. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extend TCA_ACT space with TCA_ACT_FLAGSVlad Buslov1-1/+1
Extend TCA_ACT space with nla_bitfield32 flags. Add TCA_ACT_FLAGS_NO_PERCPU_STATS as the only allowed flag. Parse the flags in tcf_action_init_1() and pass resulting value as additional argument to a_o->init(). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: modify stats helper functions to support regular statsVlad Buslov1-9/+21
Modify stats update helper functions introduced in previous patches in this series to fallback to regular tc_action->tcfa_{b|q}stats if cpu stats are not allocated for the action argument. If regular non-percpu allocated counters are in use, then obtain action tcfa_lock while modifying them. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract qstats update code into functionsVlad Buslov1-0/+16
Extract common code that increments cpu_qstats counters into standalone act API functions. Change hardware offloaded actions that use percpu counter allocation to use the new functions instead of accessing cpu_qstats directly. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract bstats update code into functionVlad Buslov1-0/+7
Extract common code that increments cpu_bstats counter into standalone act API function. Change hardware offloaded actions that use percpu counter allocation to use the new function instead of incrementing cpu_bstats directly. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: sched: extract common action counters update code into functionVlad Buslov1-0/+2
Currently, all implementations of tc_action_ops->stats_update() callback have almost exactly the same implementation of counters update code (besides gact which also updates drop counter). In order to simplify support for using both percpu-allocated and regular action counters depending on run-time flag in following patches, extract action counters update code into standalone function in act API. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: sched: use get_dev() action API in flow_action infraVlad Buslov1-2/+2
When filling in hardware intermediate representation tc_setup_flow_action() directly obtains, checks and takes reference to dev used by mirred action, instead of using act->ops->get_dev() API created specifically for this purpose. In order to remove code duplication, refactor flow_action infra to use action API when obtaining mirred action target dev. Extend get_dev() with additional argument that is used to provide dev destructor to the user. Fixes: 5a6ff4b13d59 ("net: sched: take reference to action dev before calling offloads") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: sched: take reference to psample group in flow_action infraVlad Buslov1-0/+5
With recent patch set that removed rtnl lock dependency from cls hardware offload API rtnl lock is only taken when reading action data and can be released after action-specific data is parsed into intermediate representation. However, sample action psample group is passed by pointer without obtaining reference to it first, which makes it possible to concurrently overwrite the action and deallocate object pointed by psample_group pointer after rtnl lock is released but before driver finished using the pointer. To prevent such race condition, obtain reference to psample group while it is used by flow_action infra. Extend psample API with function psample_group_take() that increments psample group reference counter. Extend struct tc_action_ops with new get_psample_group() API. Implement the API for action sample using psample_group_take() and already existing psample_group_put() as a destructor. Use it in tc_setup_flow_action() to take reference to psample group pointed to by entry->sample.psample_group and release it in tc_cleanup_flow_action(). Disable bh when taking psample_groups_lock. The lock is now taken while holding action tcf_lock that is used by data path and requires bh to be disabled, so doing the same for psample_groups_lock is necessary to preserve SOFTIRQ-irq-safety. Fixes: 918190f50eb6 ("net: sched: flower: don't take rtnl lock for cls hw offloads API") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net_sched: fix a NULL pointer deref in ipt actionCong Wang1-1/+3
The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net/sched: let actions use RCU to access 'goto_chain'Davide Caratti1-1/+1
use RCU when accessing the action chain, to avoid use after free in the traffic path when 'goto chain' is replaced on existing TC actions (see script below). Since the control action is read in the traffic path without holding the action spinlock, we need to explicitly ensure that a->goto_chain is not NULL before dereferencing (i.e it's not sufficient to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL dereferences in tcf_action_goto_chain_exec() when the following script: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto udp action pass index 4 # tc filter add dev dd0 ingress protocol ip flower \ > ip_proto udp action csum udp goto chain 42 index 66 # tc chain del dev dd0 chain 42 ingress (start UDP traffic towards dd0) # tc action replace action csum udp pass index 66 was run repeatedly for several hours. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net/sched: prepare TC actions to properly validate the control actionDavide Caratti1-1/+6
- pass a pointer to struct tcf_proto in each actions's init() handler, to allow validating the control action, checking whether the chain exists and (eventually) refcounting it. - remove code that validates the control action after a successful call to the action's init() handler, and replace it with a test that forbids addition of actions having 'goto_chain' and NULL goto_chain pointer at the same time. - add tcf_action_check_ctrlact(), that will validate the control action and eventually allocate the action 'goto_chain' within the init() handler. - add tcf_action_set_ctrlact(), that will assign the control action and swap the current 'goto_chain' pointer with the new given one. This disallows 'goto_chain' on actions that don't initialize it properly in their init() handler, i.e. calling tcf_action_check_ctrlact() after successful IDR reservation and then calling tcf_action_set_ctrlact() to assign 'goto_chain' and 'tcf_action' consistently. By doing this, the kernel does not leak anymore refcounts when a valid 'goto chain' handle is replaced in TC actions, causing kmemleak splats like the following one: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto tcp action drop # tc chain add dev dd0 chain 43 ingress protocol ip flower \ > ip_proto udp action drop # tc filter add dev dd0 ingress matchall \ > action gact goto chain 42 index 66 # tc filter replace dev dd0 ingress matchall \ > action gact goto chain 43 index 66 # echo scan >/sys/kernel/debug/kmemleak <...> unreferenced object 0xffff93c0ee09f000 (size 1024): comm "tc", pid 2565, jiffies 4295339808 (age 65.426s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0 [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0 [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110 [<000000006126a348>] netlink_unicast+0x1a0/0x250 [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0 [<00000000a25a2171>] sock_sendmsg+0x36/0x40 [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0 [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0 [<000000007a6c61f9>] do_syscall_64+0x5b/0x180 [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000013eaa334>] 0xffffffffffffffff Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: Change TCA_ACT_* to TCA_ID_* to match that of TCA_ID_POLICEEli Cohen1-1/+1
Modify the kernel users of the TCA_ACT_* macros to use TCA_ID_*. For example, use TCA_ID_GACT instead of TCA_ACT_GACT. This will align with TCA_ID_POLICE and also differentiates these identifier, used in struct tc_action_ops type field, from other macros starting with TCA_ACT_. To make things clearer, we name the enum defining the TCA_ID_* identifiers and also change the "type" field of struct tc_action to id. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net/sched: Remove egdev mechanismOz Shlomo1-30/+0
The egdev mechanism was replaced by the TC indirect block notifications platform. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-05net_sched: convert idrinfo->lock from spinlock to a mutexCong Wang1-2/+2
In commit ec3ed293e766 ("net_sched: change tcf_del_walker() to take idrinfo->lock") we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking with the spinlock held. Unfortunately, this causes a lot of troubles here: 1. tcf_chain_destroy() could be called right after we queue the work but before the work runs. This is a use-after-free. 2. The chain refcnt is already 0, we can't even just hold it again. We can check refcnt==1 but it is ugly. 3. The chain with refcnt 0 is still visible in its block, which means it could be still found and used! 4. The block has a refcnt too, we can't hold it without introducing a proper API either. We can make it working but the end result is ugly. Instead of wasting time on reviewing it, let's just convert the troubling spinlock to a mutex, which allows us to use non-atomic allocations too. Fixes: ec3ed293e766 ("net_sched: change tcf_del_walker() to take idrinfo->lock") Reported-by: Ido Schimmel <idosch@idosch.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24net/sched: Add hardware specific counters to TC actionsEelco Chaudron1-3/+5
Add additional counters that will store the bytes/packets processed by hardware. These will be exported through the netlink interface for displaying by the iproute2 tc tool Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31Revert "net: sched: act: add extack for lookup callback"Cong Wang1-2/+1
This reverts commit 331a9295de23 ("net: sched: act: add extack for lookup callback"). This extack is never used after 6 months... In fact, it can be just set in the caller, right after ->lookup(). Cc: Alexander Aring <aring@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove unused tcfa_capabCong Wang1-2/+0
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove list_head from tc_actionCong Wang1-1/+0
After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove unused tcf_idr_check()Cong Wang1-2/+0
tcf_idr_check() is replaced by tcf_idr_check_alloc(), and __tcf_idr_check() now can be folded into tcf_idr_search(). Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove unnecessary ops->delete()Cong Wang1-2/+0
All ops->delete() wants is getting the tn->idrinfo, but we already have tc_action before calling ops->delete(), and tc_action has a pointer ->idrinfo. More importantly, each type of action does the same thing, that is, just calling tcf_idr_delete_index(). So it can be just removed. Fixes: b409074e6693 ("net: sched: add 'delete' function to action ops") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: sched: extend action ops with put_dev callbackVlad Buslov1-0/+1
As a preparation for removing dependency on rtnl lock from rules update path, all users of shared objects must take reference while working with them. Extend action ops with put_dev() API to be used on net device returned by get_dev(). Modify mirred action (only action that implements get_dev callback): - Take reference to net device in get_dev. - Implement put_dev API that releases reference to net device. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30tc/act: remove unneeded RCU lock in action callbackPaolo Abeni1-1/+1
Each lockless action currently does its own RCU locking in ->act(). This allows using plain RCU accessor, even if the context is really RCU BH. This change drops the per action RCU lock, replace the accessors with the _bh variant, cleans up a bit the surrounding code and documents the RCU status in the relevant header. No functional nor performance change is intended. The goal of this patch is clarifying that the RCU critical section used by the tc actions extends up to the classifier's caller. v1 -> v2: - preserve rcu lock in act_bpf: it's needed by eBPF helpers, as pointed out by Daniel v3 -> v4: - fixed some typos in the commit message (JiriP) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: change action API to use array of pointers to actionsVlad Buslov1-3/+4
Act API used linked list to pass set of actions to functions. It is intrusive data structure that stores list nodes inside action structure itself, which means it is not safe to modify such list concurrently. However, action API doesn't use any linked list specific operations on this set of actions, so it can be safely refactored into plain pointer array. Refactor action API to use array of pointers to tc_actions instead of linked list. Change argument 'actions' type of exported action init, destroy and dump functions. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: atomically check-allocate actionVlad Buslov1-0/+3
Implement function that atomically checks if action exists and either takes reference to it, or allocates idr slot for action index to prevent concurrent allocations of actions with same index. Use EBUSY error pointer to indicate that idr slot is reserved. Implement cleanup helper function that removes temporary error pointer from idr. (in case of error between idr allocation and insertion of newly created action to specified index) Refactor all action init functions to insert new action to idr using this API. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: add 'delete' function to action opsVlad Buslov1-0/+1
Extend action ops with 'delete' function. Each action type to implements its own delete function that doesn't depend on rtnl lock. Implement delete function that is required to delete actions without holding rtnl lock. Use action API function that atomically deletes action only if it is still in action idr. This implementation prevents concurrent threads from deleting same action twice. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: implement action API that deletes action by indexVlad Buslov1-0/+1
Implement new action API function that atomically finds and deletes action from idr by index. Intended to be used by lockless actions that do not rely on rtnl lock. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: implement unlocked action init APIVlad Buslov1-2/+4
Add additional 'rtnl_held' argument to act API init functions. It is required to implement actions that need to release rtnl lock before loading kernel module and reacquire if afterwards. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: change type of reference and bind countersVlad Buslov1-2/+3
Change type of action reference counter to refcount_t. Change type of action bind counter to atomic_t. This type is used to allow decrementing bind counter without testing for 0 result. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08net: sched: use rcu for action cookie updateVlad Buslov1-1/+1
Implement functions to atomically update and free action cookie using rcu mechanism. Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: sched: add tcf_proto_op to offload a ruleJohn Hurley1-3/+0
Create a new tcf_proto_op called 'reoffload' that generates a new offload message for each node in a tcf_proto. Pointers to the tcf_proto and whether the offload request is to add or delete the node are included. Also included is a callback function to send the offload message to and the option of priv data to go with the cb. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23net/sched: remove tcf_idr_cleanup()Davide Caratti1-1/+0
tcf_idr_cleanup() is no more used, so remove it. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net sched actions: add new tc_action_ops callbackRoman Mashak1-0/+1
Add a new callback in tc_action_ops, it will be needed by the tc actions to compute its size when a ADD/DELETE notification message is constructed. This routine has to take into account optional/variable size TLVs specific per action. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net sched actions: update Add/Delete action API with new argumentRoman Mashak1-1/+2
Introduce a new function argument to carry total attributes size for correct allocation of skb in event messages. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: handle extack in tcf_generic_walkerAlexander Aring1-1/+2
This patch adds extack handling for a common used TC act function "tcf_generic_walker()" to add an extack message on failures. The tcf_generic_walker() function can fail if get a invalid command different than DEL and GET. The naming "action" here is wrong, the correct naming would be command. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: add extack for walk callbackAlexander Aring1-1/+2
This patch adds extack support for act walker callback api. This prepares to handle extack support inside each specific act implementation. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: add extack for lookup callbackAlexander Aring1-1/+2
This patch adds extack support for act lookup callback api. This prepares to handle extack support inside each specific act implementation. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: add extack to init callbackAlexander Aring1-1/+1
This patch adds extack support for act init callback api. This prepares to handle extack support inside each specific act implementation. Based on work by David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: add extack to initAlexander Aring1-2/+3
This patch adds extack to tcf_action_init and tcf_action_init_1 functions. These are necessary to make individual extack handling in each act implementation. Based on work by David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: fix code styleAlexander Aring1-2/+3
This patch is used by subsequent patches. It fixes code style issues caught by checkpatch. Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: Revert sched action extack support series.David S. Miller1-6/+4
It was mis-applied and the changes had rejects. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: add extack to initAlexander Aring1-2/+3
This patch adds extack to tcf_action_init and tcf_action_init_1 functions. These are necessary to make individual extack handling in each act implementation. Based on work by David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16net: sched: act: fix code styleAlexander Aring1-2/+3
This patch is used by subsequent patches. It fixes code style issues caught by checkpatch. Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net_sched: switch to exit_batch for action pernet opsCong Wang1-3/+10
Since we now hold RTNL lock in tc_action_net_exit(), it is good to batch them to speedup tc action dismantle. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.