| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
QUIC servers would like to use SO_TXTIME, without having CAP_NET_ADMIN,
to efficiently pace UDP packets.
As far as sch_fq is concerned, we need to add safety checks, so
that a buggy application does not fill the qdisc with packets
having delivery time far in the future.
This patch adds a configurable horizon (default: 10 seconds),
and a configurable policy when a packet is beyond the horizon
at enqueue() time:
- either drop the packet (default policy)
- or cap its delivery time to the horizon.
$ tc -s -d qd sh dev eth0
qdisc fq 8022: root refcnt 257 limit 10000p flow_limit 100p buckets 1024
orphan_mask 1023 quantum 10Kb initial_quantum 51160b low_rate_threshold 550Kbit
refill_delay 40.0ms timer_slack 10.000us horizon 10.000s
Sent 1234215879 bytes 837099 pkt (dropped 21, overlimits 0 requeues 6)
backlog 0b 0p requeues 6
flows 1191 (inactive 1177 throttled 0)
gc 0 highprio 0 throttled 692 latency 11.480us
pkts_too_long 0 alloc_errors 0 horizon_drops 21 horizon_caps 0
v2: fixed an overflow on 32bit kernels in fq_init(), reported
by kbuild test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add adjust_phase to ptp_clock_caps capability to allow
user to query if a PHC driver supports adjust phase with
ioctl PTP_CLOCK_GETCAPS command.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-01 (v2)
The following pull-request contains BPF updates for your *net-next* tree.
We've added 61 non-merge commits during the last 6 day(s) which contain
a total of 153 files changed, 6739 insertions(+), 3367 deletions(-).
The main changes are:
1) pulled work.sysctl from vfs tree with sysctl bpf changes.
2) bpf_link observability, from Andrii.
3) BTF-defined map in map, from Andrii.
4) asan fixes for selftests, from Andrii.
5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub.
6) production cloudflare classifier as a selftes, from Lorenz.
7) bpf_ktime_get_*_ns() helper improvements, from Maciej.
8) unprivileged bpftool feature probe, from Quentin.
9) BPF_ENABLE_STATS command, from Song.
10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav.
11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a ingress frame gate control flow action.
Tc gate action does the work like this:
Assume there is a gate allow specified ingress frames can be passed at
specific time slot, and be dropped at specific time slot. Tc filter
chooses the ingress frames, and tc gate action would specify what slot
does these frames can be passed to device and what time slot would be
dropped.
Tc gate action would provide an entry list to tell how much time gate
keep open and how much time gate keep state close. Gate action also
assign a start time to tell when the entry list start. Then driver would
repeat the gate entry list cyclically.
For the software simulation, gate action requires the user assign a time
clock type.
Below is the setting example in user space. Tc filter a stream source ip
address is 192.168.0.20 and gate action own two time slots. One is last
200ms gate open let frame pass another is last 100ms gate close let
frames dropped. When the ingress frames have reach total frames over
8000000 bytes, the excessive frames will be dropped in that 200000000ns
time slot.
> tc qdisc add dev eth0 ingress
> tc filter add dev eth0 parent ffff: protocol ip \
flower src_ip 192.168.0.20 \
action gate index 2 clockid CLOCK_TAI \
sched-entry open 200000000 -1 8000000 \
sched-entry close 100000000 -1 -1
> tc chain del dev eth0 ingress chain 0
"sched-entry" follow the name taprio style. Gate state is
"open"/"close". Follow with period nanosecond. Then next item is internal
priority value means which ingress queue should put. "-1" means
wildcard. The last value optional specifies the maximum number of
MSDU octets that are permitted to pass the gate during the specified
time interval.
Base-time is not set will be 0 as default, as result start time would
be ((N + 1) * cycletime) which is the minimal of future time.
Below example shows filtering a stream with destination mac address is
10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate
action would run with one close time slot which means always keep close.
The time cycle is total 200000000ns. The base-time would calculate by:
1357000000000 + (N + 1) * cycletime
When the total value is the future time, it will be the start time.
The cycletime here would be 200000000ns for this case.
> tc filter add dev eth0 parent ffff: protocol ip \
flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \
action gate index 12 base-time 1357000000000 \
sched-entry close 200000000 -1 -1 \
clockid CLOCK_TAI
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
|
|
Not much to be done here:
- add SPDX header;
- adjust title markup;
- remove a tail whitespace;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats.
Typical userspace tools use kernel.bpf_stats_enabled as follows:
1. Enable kernel.bpf_stats_enabled;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Disable kernel.bpf_stats_enabled.
The problem with this approach is that only one userspace tool can toggle
this sysctl. If multiple tools toggle the sysctl at the same time, the
measurement may be inaccurate.
To fix this problem while keep backward compatibility, introduce a new
bpf command BPF_ENABLE_STATS. On success, this command enables stats and
returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently,
only one type, BPF_STATS_RUN_TIME, is supported. We can extend the
command to support other types of stats in the future.
With BPF_ENABLE_STATS, user space tool would have the following flow:
1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Close the fd.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com
|
|
Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.
This lets userspace discover what the kernel understands.
For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.
The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.
Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.
Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.
Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds ability to filter sockets based on cgroup v2 ID.
Such filter is helpful in ss utility for filtering sockets by
cgroup pathname.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds cgroup v2 ID to common inet diag message attributes.
Cgroup v2 ID is kernfs ID (ino or ino+gen). This attribute allows filter
inet diag output by cgroup ID obtained by name_to_handle_at() syscall.
When net_cls or net_prio cgroup is activated this ID is equal to 1 (root
cgroup ID) for newly created sockets.
Some notes about this ID:
1) gets initialized in socket() syscall
2) incoming socket gets ID from listening socket
(not during accept() syscall)
3) not changed when process get moved to another cgroup
4) can point to deleted cgroup (refcounting)
v2:
- use CONFIG_SOCK_CGROUP_DATA instead if CONFIG_CGROUPS
v3:
- fix attr size by using nla_total_size_64bit() (Eric Dumazet)
- more detailed commit message (Konstantin Khlebnikov)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-By: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for nf-next:
1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.
2) Remove 128-bit limit on the set element data area, rise it
to 64 bytes.
3) Report EOPNOTSUPP for unsupported NAT types and flags.
4) Set up nft_nat flags from the control plane path.
5) Add helper functions to set up the nf_nat_range2 structure.
6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command.
Also enhance show_fdinfo to potentially include bpf_link type-specific
information (similarly to obj_info).
Also introduce enum bpf_link_type stored in bpf_link itself and expose it in
UAPI. bpf_link_tracing also now will store and return bpf_attach_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com
|
|
Add support to look up bpf_link by ID and iterate over all existing bpf_links
in the system. GET_FD_BY_ID code handles not-yet-ready bpf_link by checking
that its ID hasn't been set to non-zero value yet. Setting bpf_link's ID is
done as the very last step in finalizing bpf_link, together with installing
FD. This approach allows users of bpf_link in kernel code to not worry about
races between user-space and kernel code that hasn't finished attaching and
initializing bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-4-andriin@fb.com
|
|
Generate ID for each bpf_link using IDR, similarly to bpf_map and bpf_prog.
bpf_link creation, initialization, attachment, and exposing to user-space
through FD and ID is a complicated multi-step process, abstract it away
through bpf_link_primer and bpf_link_prime(), bpf_link_settle(), and
bpf_link_cleanup() internal API. They guarantee that until bpf_link is
properly attached, user-space won't be able to access partially-initialized
bpf_link either from FD or ID. All this allows to simplify bpf_link attachment
and error handling code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-3-andriin@fb.com
|
|
This patch allows you to NAT the network address prefix onto another
network address prefix, a.k.a. netmapping.
Userspace must specify the NF_NAT_RANGE_NETMAP flag and the prefix
address through the NFTA_NAT_REG_ADDR_MIN and NFTA_NAT_REG_ADDR_MAX
netlink attributes.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows
to notify the userspace when the port lost the continuite of MRP frames.
This attribute is set by kernel whenever the SW or HW detects that the ring is
being open or closed.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new nested netlink attribute to configure the MRP. These attributes are used
by the userspace to add/delete/configure MRP instances and by the kernel to
notify the userspace when the MRP ring gets open/closed. MRP nested attribute
has the following attributes:
IFLA_BRIDGE_MRP_INSTANCE - the parameter type is br_mrp_instance which contains
the instance id, and the ifindex of the two ports. The ports can't be part of
multiple instances. This is used to create/delete MRP instances.
IFLA_BRIDGE_MRP_PORT_STATE - the parameter type is u32. Which can be forwarding,
blocking or disabled.
IFLA_BRIDGE_MRP_PORT_ROLE - the parameter type is br_mrp_port_role which
contains the instance id and the role. The role can be primary or secondary.
IFLA_BRIDGE_MRP_RING_STATE - the parameter type is br_mrp_ring_state which
contains the instance id and the state. The state can be open or closed.
IFLA_BRIDGE_MRP_RING_ROLE - the parameter type is br_mrp_ring_role which
contains the instance id and the ring role. The role can be MRM or MRC.
IFLA_BRIDGE_MRP_START_TEST - the parameter type is br_mrp_start_test which
contains the instance id, the interval at which to send the MRP_Test frames,
how many test frames can be missed before declaring the ring open and the
period which represent for how long to send the test frames.
Also add the file include/uapi/linux/mrp_bridge.h which defines all the types
used by MRP that are also needed by the userpace.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This bit indicates that the conntrack entry is offloaded to hardware
flow table. nf_conntrack entry will be tagged with [HW_OFFLOAD] if
it's offload to hardware.
cat /proc/net/nf_conntrack
ipv4 2 tcp 6 \
src=1.1.1.17 dst=1.1.1.16 sport=56394 dport=5001 \
src=1.1.1.16 dst=1.1.1.17 sport=5001 dport=56394 [HW_OFFLOAD] \
mark=0 zone=0 use=3
Note that HW_OFFLOAD/OFFLOAD/ASSURED are mutually exclusive.
Changelog:
* V1->V2:
- Remove check of lastused from stats. It was meant for cases such
as removing driver module while traffic still running. Better to
handle such cases from garbage collector.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On a device like a cellphone which is constantly suspending
and resuming CLOCK_MONOTONIC is not particularly useful for
keeping track of or reacting to external network events.
Instead you want to use CLOCK_BOOTTIME.
Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns()
based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Simple overlapping changes to linux/vermagic.h
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
|
|
The patch fixes:
$ scripts/bpf_helpers_doc.py > bpf-helpers.rst
$ rst2man bpf-helpers.rst > bpf-helpers.7
bpf-helpers.rst:1105: (WARNING/2) Inline strong start-string without end-string.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200422082324.2030-1-jwilk@jwilk.net
|
|
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
|
|
RFC 2863 defines the operational state testing. Add support for this
state, both as a IF_LINK_MODE_ and __LINK_STATE_.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull flexible-array member conversion from Gustavo Silva:
"The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof
operator may not be applied. As a quirk of the original
implementation of zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible
array members have incomplete type[1]. There are some instances of
code in which the sizeof operator is being incorrectly/erroneously
applied to zero-length arrays and the result is zero. Such instances
may be hiding some bugs. So, this work (flexible-array member
convertions) will also help to get completely rid of those sorts of
issues.
Notice that all of these patches have been baking in linux-next for
quite a while now and, 238 more of these patches have already been
merged into 5.7-rc1.
There are a couple hundred more of these issues waiting to be
addressed in the whole codebase"
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
* tag 'flexible-array-member-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (28 commits)
xattr.h: Replace zero-length array with flexible-array member
uapi: linux: fiemap.h: Replace zero-length array with flexible-array member
uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member
tpm_eventlog.h: Replace zero-length array with flexible-array member
ti_wilink_st.h: Replace zero-length array with flexible-array member
swap.h: Replace zero-length array with flexible-array member
skbuff.h: Replace zero-length array with flexible-array member
sched: topology.h: Replace zero-length array with flexible-array member
rslib.h: Replace zero-length array with flexible-array member
rio.h: Replace zero-length array with flexible-array member
posix_acl.h: Replace zero-length array with flexible-array member
platform_data: wilco-ec.h: Replace zero-length array with flexible-array member
memcontrol.h: Replace zero-length array with flexible-array member
list_lru.h: Replace zero-length array with flexible-array member
lib: cpu_rmap: Replace zero-length array with flexible-array member
irq.h: Replace zero-length array with flexible-array member
ihex.h: Replace zero-length array with flexible-array member
igmp.h: Replace zero-length array with flexible-array member
genalloc.h: Replace zero-length array with flexible-array member
ethtool.h: Replace zero-length array with flexible-array member
...
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
It can be confusing to have multiple features within the same driver that
are using the same verbage. As such this patch is creating a union of
free_page_report_cmd_id with free_page_hint_cmd_id so that we can clean-up
the userspace code a bit in terms of readability while maintaining the
functionality of legacy code.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200415174318.13597.99753.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
|
Pull btrfs fixes from David Sterba:
"We have a few regressions and one fix for stable:
- revert fsync optimization
- fix lost i_size update
- fix a space accounting leak
- build fix, add back definition of a deprecated ioctl flag
- fix search condition for old roots in relocation"
* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition
btrfs: fix reclaim counter leak of space_info objects
btrfs: make full fsyncs always operate on the entire file again
btrfs: fix lost i_size update after cloning inline extent
btrfs: check commit root generation in should_ignore_root
|
|
The commit 9c1036fdb1d1ff1b ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC
support") breaks strace build with the kernel headers from git:
btrfs.c: In function "btrfs_test_subvol_ioctls":
btrfs.c:531:23: error: "BTRFS_SUBVOL_CREATE_ASYNC" undeclared (first use
in this function)
vol_args_v2.flags = BTRFS_SUBVOL_CREATE_ASYNC;
Moreover, it is improper to break UAPI, strace uses the definitions to
decode ioctls that are considered part of public API.
Restore the macro definition and put it under "#ifndef __KERNEL__"
in order to prevent inadvertent in-kernel usage.
Fixes: 9c1036fdb1d1ff1b ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull iommu updates from Joerg Roedel:
- ARM-SMMU support for the TLB range invalidation command in SMMUv3.2
- ARM-SMMU introduction of command batching helpers to batch up CD and
ATC invalidation
- ARM-SMMU support for PCI PASID, along with necessary PCI symbol
exports
- Introduce a generic (actually rename an existing) IOMMU related
pointer in struct device and reduce the IOMMU related pointers
- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures
- Various smaller fixes and improvements
* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu: Move fwspec->iommu_priv to struct dev_iommu
iommu/virtio: Use accessor functions for iommu private data
iommu/qcom: Use accessor functions for iommu private data
iommu/mediatek: Use accessor functions for iommu private data
iommu/renesas: Use accessor functions for iommu private data
iommu/arm-smmu: Use accessor functions for iommu private data
iommu/arm-smmu: Refactor master_cfg/fwspec usage
iommu/arm-smmu-v3: Use accessor functions for iommu private data
iommu: Introduce accessors for iommu private data
iommu/arm-smmu: Fix uninitilized variable warning
iommu: Move iommu_fwspec to struct dev_iommu
iommu: Rename struct iommu_param to dev_iommu
iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
ACPI/IORT: Remove direct access of dev->iommu_fwspec
iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
iommu/virtio: Fix freeing of incomplete domains
iommu/virtio: Fix sparse warning
iommu/vt-d: Add build dependency on IOASID
...
|
|
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
|
|
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
...
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Fix spurious overlap condition in the rbtree tree, from Stefano Brivio.
2) Fix possible uninitialized pointer dereference in nft_lookup.
3) IDLETIMER v1 target matches the Android layout, from
Maciej Zenczykowski.
4) Dangling pointer in nf_tables_set_alloc_name, from Eric Dumazet.
5) Fix RCU warning splat in ipset find_set_type(), from Amol Grover.
6) Report EOPNOTSUPP on unsupported set flags and object types in sets.
7) Add NFT_SET_CONCAT flag to provide consistent error reporting
when users defines set with ranges in concatenations in old kernels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge more updates from Andrew Morton:
- a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)
- various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
ubsan, fault-injection, ipc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
ipc/shm.c: make compat_ksys_shmctl() static
ipc/mqueue.c: fix a brace coding style issue
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
ubsan: include bug type in report header
kasan: unset panic_on_warn before calling panic()
ubsan: check panic_on_warn
drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
ubsan: split "bounds" checker from other options
ubsan: add trap instrumentation option
init/Kconfig: clean up ANON_INODES and old IO schedulers options
kernel/gcov/fs.c: replace zero-length array with flexible-array member
gcov: gcc_3_4: replace zero-length array with flexible-array member
gcov: gcc_4_7: replace zero-length array with flexible-array member
kernel/kmod.c: fix a typo "assuems" -> "assumes"
reiserfs: clean up several indentation issues
kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
samples/hw_breakpoint: drop use of kallsyms_lookup_name()
samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
fs/binfmt_elf.c: allocate less for static executable
...
|
|
Pull UML updates from Richard Weinberger:
- New mode for time travel, external via virtio
- Fixes for ubd to make sure no requests can get lost
- Fixes for vector networking
- Allow CONFIG_STATIC_LINK only when possible
- Minor cleanups and fixes
* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove some unnecessary NULL checks in vector_user.c
um: vector: Avoid NULL ptr deference if transport is unset
um: Make CONFIG_STATIC_LINK actually static
um: Implement cpu_relax() as ndelay(1) for time-travel
um: Implement ndelay/udelay in time-travel mode
um: Implement time-travel=ext
um: virtio: Implement VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS
um: time-travel: Rewrite as an event scheduler
um: Move timer-internal.h to non-shared
hostfs: Use kasprintf() instead of fixed buffer formatting
um: falloc.h needs to be directly included for older libc
um: ubd: Retry buffer read on any kind of error
um: ubd: Prevent buffer overrun on command completion
um: Fix overlapping ELF segments when statically linked
um: Delete never executed timer
um: Don't overwrite ethtool driver version
um: Fix len of file in create_pid_file
um: Don't use console_drivers directly
um: Cleanup CONFIG_IOSCHED_CFQ
|
|
Now it's safe to enable write protection in userfaultfd API
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220163112.11409-15-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce the new uffd-wp APIs for userspace.
Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking
using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can
co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the
userspace program can not only resolve missing page faults, and at the
same time tracking page data changes along the way.
Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level
write protection tracking. Note that we will need to register the memory
region with UFFDIO_REGISTER_MODE_WP before that.
[peterx@redhat.com: write up the commit message]
[peterx@redhat.com: remove useless block, write commit message, check against
VM_MAYWRITE rather than VM_WRITE when register]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This allows UFFDIO_COPY to map pages write-protected.
[peterx@redhat.com: switch to VM_WARN_ON_ONCE in mfill_atomic_pte; add brackets
around "dst_vma->vm_flags & VM_WRITE"; fix wordings in comments and
commit messages]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-6-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for the page reporting feature provided by virtio-balloon.
Reporting differs from the regular balloon functionality in that is is
much less durable than a standard memory balloon. Instead of creating a
list of pages that cannot be accessed the pages are only inaccessible
while they are being indicated to the virtio interface. Once the
interface has acknowledged them they are placed back into their respective
free lists and are once again accessible by the guest system.
Unlike a standard balloon we don't inflate and deflate the pages. Instead
we perform the reporting, and once the reporting is completed it is
assumed that the page has been dropped from the guest and will be faulted
back in the next time the page is accessed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Stefano originally proposed to introduce this flag, users hit EOPNOTSUPP
in new binaries with old kernels when defining a set with ranges in
a concatenation.
Fixes: f3a2181e16f1 ("netfilter: nf_tables: Support for sets with multiple ranged fields")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prepare input updates for 5.7 merge window.
|
|
Pull fsnotify updates from Jan Kara:
"This implements the fanotify FAN_DIR_MODIFY event.
This event reports the name in a directory under which a change
happened and together with the directory filehandle and fstatat()
allows reliable and efficient implementation of directory
synchronization"
* tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Fix the checks in fanotify_fsid_equal
fanotify: report name info for FAN_DIR_MODIFY event
fanotify: record name info for FAN_DIR_MODIFY event
fanotify: Drop fanotify_event_has_fid()
fanotify: prepare to report both parent and child fid's
fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name
fanotify: divorce fanotify_path_event and fanotify_fid_event
fanotify: Store fanotify handles differently
fanotify: Simplify create_fd()
fanotify: fix merging marks masks with FAN_ONDIR
fanotify: merge duplicate events on parent and child
fsnotify: replace inode pointer with an object id
fsnotify: simplify arguments passing to fsnotify_parent()
fsnotify: use helpers to access data by data_type
fsnotify: funnel all dirent events through fsnotify_name()
fsnotify: factor helpers fsnotify_dentry() and fsnotify_file()
fsnotify: tidy up FS_ and FAN_ constants
|
|
Android has long had an extension to IDLETIMER to send netlink
messages to userspace, see:
https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline/include/uapi/linux/netfilter/xt_IDLETIMER.h#42
Note: this is idletimer target rev 1, there is no rev 0 in
the Android common kernel sources, see registration at:
https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline/net/netfilter/xt_IDLETIMER.c#483
When we compare that to upstream's new idletimer target rev 1:
https://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git/tree/include/uapi/linux/netfilter/xt_IDLETIMER.h#n46
We immediately notice that these two rev 1 structs are the
same size and layout, and that while timer_type and send_nl_msg
are differently named and serve a different purpose, they're
at the same offset.
This makes them impossible to tell apart - and thus one cannot
know in a mixed Android/vanilla environment whether one means
timer_type or send_nl_msg.
Since this is iptables/netfilter uapi it introduces a problem
between iptables (vanilla vs Android) userspace and kernel
(vanilla vs Android) if the two don't match each other.
Additionally when at some point in the future Android picks up
5.7+ it's not at all clear how to resolve the resulting merge
conflict.
Furthermore, since upgrading the kernel on old Android phones
is pretty much impossible there does not seem to be an easy way
out of this predicament.
The only thing I've been able to come up with is some super
disgusting kernel version >= 5.7 check in the iptables binary
to flip between different struct layouts.
By adding a dummy field to the vanilla Linux kernel header file
we can force the two structs to be compatible with each other.
Long term I think I would like to deprecate send_nl_msg out of
Android entirely, but I haven't quite been able to figure out
exactly how we depend on it. It seems to be very similar to
sysfs notifications but with some extra info.
Currently it's actually always enabled whenever Android uses
the IDLETIMER target, so we could also probably entirely
remove it from the uapi in favour of just always enabling it,
but again we can't upgrade old kernels already in the field.
(Also note that this doesn't change the structure's size,
as it is simply fitting into the pre-existing padding, and
that since 5.7 hasn't been released yet, there's still time
to make this uapi visible change)
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull more perf updates from Thomas Gleixner:
"Perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates"
* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf python: Fix clang detection to strip out options passed in $CC
perf tools: Support Python 3.8+ in Makefile
perf script: Fix invalid read of directory entry after closedir()
perf script report: Fix SEGFAULT when using DWARF mode
perf script: add -S/--symbols documentation
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf events parser: Add missing Intel CPU events to parser
perf script: Allow --symbol to accept hexadecimal addresses
perf report/top TUI: Fix title line formatting
perf top: Support hotkey to change sort order
perf top: Support --group-sort-idx to change the sort order
perf symbols: Fix arm64 gap between kernel start and module end
perf build-test: Honour JOBS to override detection of number of cores
perf script: Add --show-cgroup-events option
perf top: Add --all-cgroups option
perf record: Add --all-cgroups option
perf record: Support synthesizing cgroup events
perf report: Add 'cgroup' sort key
perf cgroup: Maintain cgroup hierarchy
perf tools: Basic support for CGROUP event
...
|
|
Pull RTC updates from Alexandre Belloni:
"More cleanup this cycle, with the final goal of removing the
rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
been modified for this now are ready for the end of times (whether it
happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
single new driver and the usual fixes and features.
Summary:
Subsystem:
- The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
removed and only the 64bit version remain.
- hctosys now works with drivers compiled as modules
New driver:
- MediaTek MT2712 SoC based RTC
Drivers:
- set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
starfire, sun6i
- ds1307: DS1388 oscillator failure detection and watchdog support
- jz4740: JZ4760 support
- pcf85063: clock out pin support
- sun6i: external 32k oscillator is now optional, the range is now
handled by the core, providing a solution for 2034"
* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
rtc: ds1307: check for failed memory allocation on wdt
rtc: class: remove redundant assignment to variable err
rtc: remove rtc_time_to_tm and rtc_tm_to_time
rtc: sun6i: let the core handle rtc range
rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: ds1307: add support for watchdog timer on ds1388
rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: da9052: set range
rtc: da9052: convert to devm_rtc_allocate_device
rtc: imx-sc: Align imx sc msg structs to 4
rtc: fsl-ftm-alarm: report alarm to core
rtc: pcf85063: Add pcf85063 clkout control to common clock framework
rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
rtc: class: avoid unnecessary lookup in hctosys
dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
rtc: jz4740: Rename vendor-specific DT properties
rtc: jz4740: Add support for JZ4760 SoC
rtc: class: support hctosys from modular RTC drivers
rtc: pm8xxx: clear alarm register when alarm is not enabled
rtc: omap: drop unused dt-bindings header
...
|
|
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that do not
block interrupts. This makes us better at getting events to
userspace without blocking or disturbing new events arriving in the
same time. This was reviewed by the KFIFO maintainer Stefani. This
is a generic improvement which paves the road for similar
improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines and
giving them back, possibly reconfiguring them in the process: we
can now monitor that and not get stuck with stale static
information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could move
forward and *backward* in time, which probably would just cause
silent bugs and weird behaviour. In the long run we see two
relevant timestamps: ktime_get_ns() or the timestamp sometimes
provided by the GPIO hardware itself, if that exists.
- Device Tree overlay support for GPIO hogs. On systems that load
overlays, these overlays can now contain hogs, and will then be
respected.
- Handle pin control interaction with nonexisting pin ranges in the
GPIO library core instead of in the individual drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements, such as
blocking of idle on pending GPIO interrupts"
* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
pinctrl: Unconditionally assign .request()/.free()
gpio: Unconditionally assign .request()/.free()
gpio: export of_pinctrl_get to modules
pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
gpio: Rename variable in core APIs
gpio: Avoid using pin ranges with !PINCTRL
gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
gpiolib: Pass gpio_desc to gpio_set_config()
gpiolib: Introduce gpiod_set_config()
tools: gpio: Fix out-of-tree build regression
gpio: gpiolib: fix a doc warning
gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
gpio: tegra186: Add support for pin ranges
gpio: Support GPIO controllers without pin-ranges
ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
gpio: brcmstb: support gpio-line-names property
tools: gpio: Fix typo in gpio-utils
tools: gpio-hammer: Apply scripts/Lindent and retain good changes
gpiolib: gpio_name_to_desc: factor out !name check
...
|
|
Pull VFIO updates from Alex Williamson:
- vfio-pci SR-IOV support (Alex Williamson)
- vfio DMA read/write interface (Yan Zhao)
- Fix vfio-platform erroneous IRQ error log (Eric Auger)
- Fix shared ATSD support for NVLink on POWER (Sam Bobroff)
- Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)
* tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio:
vfio: Ignore -ENODEV when getting MSI cookie
vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]
vfio/pci: Cleanup .probe() exit paths
vfio/pci: Remove dev_fmt definition
vfio/pci: Add sriov_configure support
vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first user
vfio/pci: Introduce VF token
vfio/pci: Implement match ops
vfio: Include optional device match in vfio_device_ops callbacks
vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pages
vfio: introduce vfio_dma_rw to read/write a range of IOVAs
vfio: allow external user to get vfio group from device
vfio: platform: Switch to platform_get_irq_optional()
|
Eric Dumazet
Vincent Cheng
David S. Miller
Po Liu
Stanislav Fomichev
Mauro Carvalho Chehab
Song Liu
Johannes Berg
Dmitry Yakunin
Andrii Nakryiko
Pablo Neira Ayuso
Horatiu Vultur
Bodong Wang
Maciej Żenczykowski
Linus Torvalds
Jakub Wilk
Andrew Lunn
Gustavo A. R. Silva
Alexander Duyck
Eugene Syromiatnikov
Shaohua Li
Andrea Arcangeli
Dmitry Torokhov