| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The commit 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage")
under PREEMPT_RT=y, disabling preemption introduced an unbounded
latency since the loop is not fixed. This change caused a regression
since previously preemption was not disabled and we would dereference
RCU-protected pointers explicitly. That being said, these pointers
cannot change.
Before kallsyms-specific data is prepared/or set-up, we ensure that
the unformed module is known to be unique i.e. does not already exist
(see load_module()). Therefore, we can fix this by using the common and
more appropriate RCU flavour as this section of code can be safely
preempted.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
When CONFIG_MODULE_UNLOAD is not selected, 'exit' is
set but never used.
It is not possible to replace the #ifdef CONFIG_MODULE_UNLOAD by
IS_ENABLED(CONFIG_MODULE_UNLOAD) because mod->exit doesn't exist
when CONFIG_MODULE_UNLOAD is not selected.
And because of the rcu_read_lock_sched() section it is not easy
to regroup everything in a single #ifdef. Let's regroup partially
and add missing #ifdef to completely opt out the use of
'exit' when CONFIG_MODULE_UNLOAD is not selected.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
cppcheck reports the following warnings:
kernel/module/main.c:1455:26: warning: Redundant assignment of 'mod->core_layout.size' to itself. [selfAssignment]
mod->core_layout.size = strict_align(mod->core_layout.size);
^
kernel/module/main.c:1489:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1493:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1504:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1459:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1463:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1467:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
This is due to strict_align() being a no-op when
CONFIG_STRICT_MODULE_RWX is not selected.
Transform strict_align() macro into an inline function. It will
allow type checking and avoid the selfAssignment warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The commit 91fb02f31505 ("module: Move kallsyms support into a separate
file") changed from using strlcpy() to using strscpy() which created a
buffer overflow. That happened because:
1) an incorrect value was passed as the buffer length
2) strscpy() (unlike strlcpy()) may copy beyond the length of the
input string when copying word-by-word.
The assumption was that because it was already known that the strings
being copied would fit in the space available, it was not necessary
to correctly set the buffer length. strscpy() breaks that assumption
because although it will not touch bytes beyond the given buffer length
it may write bytes beyond the input string length when writing
word-by-word.
The result of the buffer overflow is to corrupt the symbol type
information that follows. e.g.
$ sudo cat -v /proc/kallsyms | grep '\^' | head
ffffffffc0615000 ^@ rfcomm_session_get [rfcomm]
ffffffffc061c060 ^@ session_list [rfcomm]
ffffffffc06150d0 ^@ rfcomm_send_frame [rfcomm]
ffffffffc0615130 ^@ rfcomm_make_uih [rfcomm]
ffffffffc07ed58d ^@ bnep_exit [bnep]
ffffffffc07ec000 ^@ bnep_rx_control [bnep]
ffffffffc07ec1a0 ^@ bnep_session [bnep]
ffffffffc07e7000 ^@ input_leds_event [input_leds]
ffffffffc07e9000 ^@ input_leds_handler [input_leds]
ffffffffc07e7010 ^@ input_leds_disconnect [input_leds]
Notably, the null bytes (represented above by ^@) can confuse tools.
Fix by correcting the buffer length.
Fixes: 91fb02f31505 ("module: Move kallsyms support into a separate file")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Commit cfc1d277891e ("module: Move all into module/") changed the prefix
of the module param by moving/renaming files. A later commit also moves
the module_param() into a different file, thereby changing the prefix
yet again.
This would break kernel cmdline compatibility and also userspace
compatibility at /sys/module/module/parameters/sig_enforce.
So, set the prefix back to "module.".
Fixes: cfc1d277891e ("module: Move all into module/")
Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
|
|
Now check_exported_symbol() always succeeds.
Merge it into find_exported_symbol_in_search() to make the code concise.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Currently, !fsa->gplok && syms->license == GPL_ONLY) is checked after
bsearch() succeeds.
It is meaningless to do the binary search in the GPL symbol table when
fsa->gplok is false because we know find_exported_symbol_in_section()
will fail anyway.
This check should be done before bsearch().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
There is no need to use an opaque pointer for check_exported_symbol()
or find_exported_symbol_in_section.
Pass (struct find_symbol_arg *) explicitly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The error log for inherit_taint() doesn't really help to find the
symbol which violates GPL rules.
For example,
if a module has 300 symbol and includes 50 disallowed symbols,
the log only shows the content below and we have no idea what symbol is.
AAA: module using GPL-only symbols uses symbols from proprietary module BBB.
It's hard for user who doesn't really know how the symbol was parsing.
This patch add symbol name to tell the offending symbols explicitly.
AAA: module using GPL-only symbols uses symbols SSS from proprietary module BBB.
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
It is trivial to craft a module to trigger OOB access in this line:
if (info->secstrings[strhdr->sh_size - 1] != '\0') {
BUG: unable to handle page fault for address: ffffc90000aa0fff
PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:load_module+0x19b/0x2391
Fixes: ec2a29593c83 ("module: harden ELF info handling")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
[rebased patch onto modules-next]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Currently, only the initial module that tainted the kernel is
recorded e.g. when an out-of-tree module is loaded.
The purpose of this patch is to allow the kernel to maintain a record of
each unloaded module that taints the kernel. So, in addition to
displaying a list of linked modules (see print_modules()) e.g. in the
event of a detected bad page, unloaded modules that carried a taint/or
taints are displayed too. A tainted module unload count is maintained.
The number of tracked modules is not fixed. This feature is disabled by
default.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates module_assert_mutex_or_preempt() to internal.h.
So, the aforementiond function can be used outside of main/or core
module code yet will remain restricted for internal use only.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
The purpose of this patch is to modify module_flags_taint() to accept
a module's taints bitmap as a parameter and modifies all users
accordingly. Furthermore, it is now possible to access a given
module's taint flags data outside of non-essential code yet does
remain for internal use only.
This is in preparation for module unload taint tracking support.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Replace module_addr_min and module_addr_max by
mod_tree.addr_min and mod_tree.addr_max
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC to allow architectures
to request having modules data in vmalloc area instead of module area.
This is required on powerpc book3s/32 in order to set data non
executable, because it is not possible to set executability on page
basis, this is done per 256 Mbytes segments. The module area has exec
right, vmalloc area has noexec.
This can also be useful on other powerpc/32 in order to maximize the
chance of code being close enough to kernel core to avoid branch
trampolines.
Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mcgrof: rebased in light of kernel/module/kdb.c move]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In order to allow separation of data from text, add another layout,
called data_layout. For architectures requesting separation of text
and data, only text will go in core_layout and data will go in
data_layout.
For architectures which keep text and data together, make data_layout
an alias of core_layout, that way data_layout can be used for all
data manipulations, regardless of whether data is in core_layout or
data_layout.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In order to separate text and data, we need to setup
two rb trees.
Modify functions to give the tree as a parameter.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In order to separate text and data, we need to setup
two rb trees.
This means that struct mod_tree_root is required even without
MODULES_TREE_LOOKUP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
debug_align() was added by commit 84e1c6bb38eb ("x86: Add RO/NX
protection for loadable kernel modules")
At that time the config item was CONFIG_DEBUG_SET_MODULE_RONX.
But nowadays it has changed to CONFIG_STRICT_MODULE_RWX and
debug_align() is confusing because it has nothing to do with
DEBUG.
Rename it strict_align()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Perform layout alignment verification up front and WARN_ON()
and fail module loading instead of crashing the machine.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Move module_enable_x() together with module_enable_nx() and
module_enable_ro().
Those three functions are going together, they are all used
to set up the correct page flags on the different sections.
As module_enable_x() is used independently of
CONFIG_STRICT_MODULE_RWX, build strict_rwx.c all the time and
use IS_ENABLED(CONFIG_STRICT_MODULE_RWX) when relevant.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
module_enable_x() has nothing to do with CONFIG_ARCH_HAS_STRICT_MODULE_RWX
allthough by coincidence architectures who need module_enable_x() are
selection CONFIG_ARCH_HAS_STRICT_MODULE_RWX.
Enable module_enable_x() for everyone everytime. If an architecture
already has module text set executable, it's a no-op.
Don't check text_size alignment. When CONFIG_STRICT_MODULE_RWX is set
the verification is already done in frob_rodata(). When
CONFIG_STRICT_MODULE_RWX is not set it is not a big deal to have the
start of data as executable. Just make sure we entirely get the last
page when the boundary is not aligned.
And don't BUG on misaligned base as some architectures like nios2
use kmalloc() for allocating modules. So just bail out in that case.
If that's a problem, a page fault will occur later anyway.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates module version support out of core code into
kernel/module/version.c. In addition simple code refactoring to
make this possible.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates the kdb 'lsmod' command support out of main
kdb code into its own file under kernel/module. In addition to
the above, a minor style warning i.e. missing a blank line after
declarations, was resolved too. The new file was added to
MAINTAINERS. Finally we remove linux/module.h as it is entirely
redundant.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates module sysfs support out of core code into
kernel/module/sysfs.c. In addition simple code refactoring to
make this possible.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates code that allows one to generate a
list of loaded/or linked modules via /proc when procfs
support is enabled into kernel/module/procfs.c.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
The purpose of this patch is to address the various Sparse warnings
due to the incorrect dereference/or access of an __rcu pointer.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates kallsyms code out of core module
code kernel/module/kallsyms.c
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates kmemleak code out of core module
code into kernel/module/debug_kmemleak.c
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates additional module signature check
code from core module code into kernel/module/signing.c.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates code that makes module text
and rodata memory read-only and non-text memory
non-executable from core module code into
kernel/module/strict_rwx.c.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates module latched RB-tree support
(e.g. see __module_address()) from core module code
into kernel/module/tree_lookup.c.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch migrates livepatch support (i.e. used during module
add/or load and remove/or deletion) from core module code into
kernel/module/livepatch.c. At the moment it contains code to
persist Elf information about a given livepatch module, only.
The new file was added to MAINTAINERS.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This patch will address the following warning and style violations
generated by ./scripts/checkpatch.pl in strict mode:
WARNING: Use #include <linux/module.h> instead of <asm/module.h>
#10: FILE: kernel/module/internal.h:10:
+#include <asm/module.h>
CHECK: spaces preferred around that '-' (ctx:VxV)
#18: FILE: kernel/module/internal.h:18:
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
CHECK: Please use a blank line after function/struct/union/enum declarations
#69: FILE: kernel/module/internal.h:69:
+}
+static inline void module_decompress_cleanup(struct load_info *info)
^
CHECK: extern prototypes should be avoided in .h files
#84: FILE: kernel/module/internal.h:84:
+extern int mod_verify_sig(const void *mod, struct load_info *info);
WARNING: Missing a blank line after declarations
#116: FILE: kernel/module/decompress.c:116:
+ struct page *page = module_get_next_page(info);
+ if (!page) {
WARNING: Missing a blank line after declarations
#174: FILE: kernel/module/decompress.c:174:
+ struct page *page = module_get_next_page(info);
+ if (!page) {
CHECK: Please use a blank line after function/struct/union/enum declarations
#258: FILE: kernel/module/decompress.c:258:
+}
+static struct kobj_attribute module_compression_attr = __ATTR_RO(compression);
Note: Fortunately, the multiple-include optimisation found in
include/linux/module.h will prevent duplication/or inclusion more than
once.
Fixes: f314dfea16a0 ("modsign: log module name in the event of an error")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional change.
This patch makes it possible to move non-essential code
out of core module code.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
No functional changes.
This patch moves all module related code into a separate directory,
modifies each file name and creates a new Makefile. Note: this effort
is in preparation to refactor core module code.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
Aaron Tomlin
Christophe Leroy
Adrian Hunter
Saravana Kannan
Linus Torvalds
Masahiro Yamada
Lecopzer Chen
Alexey Dobriyan