aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/lib/mpi/mpi-mul.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-10-27net: protect tcf_block_unbind with block lockLeon Romanovsky1-2/+2
The tcf_block_unbind() expects that the caller will take block->cb_lock before calling it, however the code took RTNL lock and dropped cb_lock instead. This causes to the following kernel panic. WARNING: CPU: 1 PID: 13524 at net/sched/cls_api.c:1488 tcf_block_unbind+0x2db/0x420 Modules linked in: mlx5_ib mlx5_core mlxfw ptp pps_core act_mirred act_tunnel_key cls_flower vxlan ip6_udp_tunnel udp_tunnel dummy sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm ib_uverbs ib_core overlay [last unloaded: mlxfw] CPU: 1 PID: 13524 Comm: test-ecmp-add-v Tainted: G W 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:tcf_block_unbind+0x2db/0x420 Code: ff 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8d bc 24 30 01 00 00 be ff ff ff ff e8 7d 7f 70 00 85 c0 0f 85 7b fd ff ff <0f> 0b e9 74 fd ff ff 48 c7 c7 dc 6a 24 84 e8 02 ec fe fe e9 55 fd RSP: 0018:ffff888117d17968 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88812f713c00 RCX: 1ffffffff0848d5b RDX: 0000000000000001 RSI: ffff88814fbc8130 RDI: ffff888107f2b878 RBP: 1ffff11022fa2f3f R08: 0000000000000000 R09: ffffffff84115a87 R10: fffffbfff0822b50 R11: ffff888107f2b898 R12: ffff88814fbc8000 R13: ffff88812f713c10 R14: ffff888117d17a38 R15: ffff88814fbc80c0 FS: 00007f6593d36740(0000) GS:ffff8882a4f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005607a00758f8 CR3: 0000000131aea006 CR4: 0000000000170ea0 Call Trace: tc_block_indr_cleanup+0x3e0/0x5a0 ? tcf_block_unbind+0x420/0x420 ? __mutex_unlock_slowpath+0xe7/0x610 flow_indr_dev_unregister+0x5e2/0x930 ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? flow_indr_block_cb_alloc+0x3c0/0x3c0 ? mlx5_db_free+0x37c/0x4b0 [mlx5_core] mlx5e_cleanup_rep_tx+0x8b/0xc0 [mlx5_core] mlx5e_detach_netdev+0xe5/0x120 [mlx5_core] mlx5e_vport_rep_unload+0x155/0x260 [mlx5_core] esw_offloads_disable+0x227/0x2b0 [mlx5_core] mlx5_eswitch_disable_locked.cold+0x38e/0x699 [mlx5_core] mlx5_eswitch_disable+0x94/0xf0 [mlx5_core] mlx5_device_disable_sriov+0x183/0x1f0 [mlx5_core] mlx5_core_sriov_configure+0xfd/0x230 [mlx5_core] sriov_numvfs_store+0x261/0x2f0 ? sriov_drivers_autoprobe_store+0x110/0x110 ? sysfs_file_ops+0x170/0x170 ? sysfs_file_ops+0x117/0x170 ? sysfs_file_ops+0x170/0x170 kernfs_fop_write+0x1ff/0x3f0 ? rcu_read_lock_any_held+0x6e/0x90 vfs_write+0x1f3/0x620 ksys_write+0xf9/0x1d0 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3f0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <...> ---[ end trace bfdd028ada702879 ]--- Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20201026123327.1141066-1-leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27ibmveth: Fix use of ibmveth in a bridge.Thomas Bogendoerfer1-6/+0
The check for src mac address in ibmveth_is_packet_unsupported is wrong. Commit 6f2275433a2f wanted to shut down messages for loopback packets, but now suppresses bridged frames, which are accepted by the hypervisor otherwise bridging won't work at all. Fixes: 6f2275433a2f ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20201026104221.26570-1-msuchanek@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27net/sched: act_mpls: Add softdep on mpls_gso.koGuillaume Nault1-0/+1
TCA_MPLS_ACT_PUSH and TCA_MPLS_ACT_MAC_PUSH might be used on gso packets. Such packets will thus require mpls_gso.ko for segmentation. v2: Drop dependency on CONFIG_NET_MPLS_GSO in Kconfig (from Jakub and David). Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/1f6cab15bbd15666795061c55563aaf6a386e90e.1603708007.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27ravb: Fix bit fields checking in ravb_hwtstamp_get()Andrew Gabbasov1-3/+7
In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27devlink: Unlock on error in dumpit()Dan Carpenter1-2/+4
This needs to unlock before returning. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27devlink: Fix some error codesDan Carpenter1-9/+15
These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27chelsio/chtls: fix memory leaks in CPL handlersVinay Kumar Yadav1-15/+12
CPL handler functions chtls_pass_open_rpl() and chtls_close_listsrv_rpl() should return CPL_RET_BUF_DONE so that caller function will do skb free to avoid leak. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201025194228.31271-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27chelsio/chtls: fix deadlock issueVinay Kumar Yadav1-2/+0
In chtls_pass_establish() we hold child socket lock using bh_lock_sock and we are again trying bh_lock_sock in add_to_reap_list, causing deadlock. Remove bh_lock_sock in add_to_reap_list() as lock is already held. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201025193538.31112-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26net: hns3: Clear the CMDQ registers before unmapping BAR regionZenghui Yu1-1/+1
When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.Vasundhara Volam1-1/+2
In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Check abort error state in bnxt_open_nic().Michael Chan1-1/+4
bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam2-1/+19
When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam1-11/+2
As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam1-4/+5
A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()Amit Cohen1-0/+3
Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: core: Fix memory leak on module removalIdo Schimmel1-0/+2
Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vadim Pasternak <vadimp@nvidia.com> Tested-by: Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: Only advertise link modes supported by both driver and deviceAmit Cohen3-2/+38
During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891268d ("mlxsw: Remove 56G speed support") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26s390/ism: fix incorrect system EIDKarsten Graul1-1/+1
The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26net/smc: fix suppressed return codeKarsten Graul1-2/+5
The patch that repaired the invalid return code in smcd_new_buf_create() missed to take care of errno ENOSPC which has a special meaning that no more DMBEs can be registered on the device. Fix that by keeping this errno value during the translation of the return code. Fixes: 6b1bbf94ab36 ("net/smc: fix invalid return code in smcd_new_buf_create()") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26net/smc: fix null pointer dereference in smc_listen_decline()Karsten Graul1-3/+4
smc_listen_work() calls smc_listen_decline() on label out_decl, providing the ini pointer variable. But this pointer can still be null when the label out_decl is reached. Fix this by checking the ini variable in smc_listen_work() and call smc_listen_decline() with the result directly. Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26vsock: use ns_capable_noaudit() on socket createJeff Vander Stoep1-1/+1
During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by: Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/ Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26cxgb4: set up filter action after rewritesRaju Rangoju2-29/+31
The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26net: hns3: clean up a return in hclge_tm_bp_setup()Dan Carpenter1-1/+1
Smatch complains that "ret" might be uninitialized if we don't enter the loop. We do always enter the loop so it's a false positive, but it's cleaner to just return a literal zero and that silences the warning as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023112212.GA282278@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23tcp: Prevent low rmem stalls with SO_RCVLOWAT.Arjun Roy2-1/+4
With SO_RCVLOWAT, under memory pressure, it is possible to enter a state where: 1. We have not received enough bytes to satisfy SO_RCVLOWAT. 2. We have not entered buffer pressure (see tcp_rmem_pressure()). 3. But, we do not have enough buffer space to accept more packets. In this case, we advertise 0 rwnd (due to #3) but the application does not drain the receive queue (no wakeup because of #1 and #2) so the flow stalls. Modify the heuristic for SO_RCVLOWAT so that, if we are advertising rwnd<=rcv_mss, force a wakeup to prevent a stall. Without this patch, setting tcp_rmem to 6143 and disabling TCP autotune causes a stalled flow. With this patch, no stall occurs. This is with RPC-style traffic with large messages. Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23net: ucc_geth: Drop extraneous parentheses in comparisonMichael Ellerman1-1/+1
Clang warns about the extra parentheses in this comparison: drivers/net/ethernet/freescale/ucc_geth.c:1361:28: warning: equality comparison with extraneous parentheses if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ It seems clear the intent here is to do a comparison not an assignment, so drop the extra parentheses to avoid any confusion. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023033236.3296988-1-mpe@ellerman.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23ionic: fix mem leak in rx_emptyShannon Nelson1-13/+11
The sentinel descriptor entry was getting missed in the traverse of the ring from head to tail, so change to a loop of 0 to the end. Fixes: f1d2e894f1b7 ("ionic: use index not pointer for queue tracking") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23ionic: no rx flush in deinitShannon Nelson3-15/+0
Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23ionic: clean up sparse complaintsShannon Nelson7-27/+29
The sparse complaints around the static_asserts were obscuring more useful complaints. So, don't check the static_asserts, and fix the remaining sparse complaints. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23chelsio/chtls: fix tls record info to userVinay Kumar Yadav1-2/+5
chtls_pt_recvmsg() receives a skb with tls header and subsequent skb with data, need to finalize the data copy whenever next skb with tls header is available. but here current tls header is overwritten by next available tls header, ends up corrupting user buffer data. fixing it by finalizing current record whenever next skb contains tls header. v1->v2: - Improved commit message. Fixes: 17a7d24aa89d ("crypto: chtls - generic handling of data and hdr") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201022190556.21308-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23net: ipa: command payloads already mappedAlex Elder1-6/+15
IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-23gfs2: Recover statfs info in journal headAbhi Das3-1/+106
Apply the outstanding statfs changes in the journal head to the master statfs file. Zero out the local statfs file for good measure. Previously, statfs updates would be read in from the local statfs inode and synced to the master statfs inode during recovery. We now use the statfs updates in the journal head to update the master statfs inode instead of reading in from the local statfs inode. To preserve backward compatibility with kernels that can't do this, we still need to keep the local statfs inode up to date by writing changes to it. At some point in the future, we can do away with the local statfs inodes altogether and keep the statfs changes solely in the journal. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23gfs2: lookup local statfs inodes prior to journal recoveryAbhi Das4-36/+139
We need to lookup the master statfs inode and the local statfs inodes earlier in the mount process (in init_journal) so journal recovery can use them when it attempts to recover the statfs info. We lookup all the local statfs inodes and store them in a linked list to allow a node to recover statfs info for other nodes in the cluster. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-10-23kvm: x86/mmu: NX largepage recovery for TDP MMUBen Gardon3-4/+18
When KVM maps a largepage backed region at a lower level in order to make it executable (i.e. NX large page shattering), it reduces the TLB performance of that region. In order to avoid making this degradation permanent, KVM must periodically reclaim shattered NX largepages by zapping them and allowing them to be rebuilt in the page fault handler. With this patch, the TDP MMU does not respect KVM's rate limiting on reclaim. It traverses the entire TDP structure every time. This will be addressed in a future patch. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Don't clear write flooding count for direct rootsBen Gardon1-1/+7
Direct roots don't have a write flooding count because the guest can't affect that paging structure. Thus there's no need to clear the write flooding count on a fast CR3 switch for direct roots. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-20-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support MMIO in the TDP MMUBen Gardon3-21/+72
In order to support MMIO, KVM must be able to walk the TDP paging structures to find mappings for a given GFN. Support this walk for the TDP MMU. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 v2: Thanks to Dan Carpenter and kernel test robot for finding that root was used uninitialized in get_mmio_spte. Signed-off-by: Ben Gardon <bgardon@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20201014182700.2888246-19-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support write protection for nesting in tdp MMUBen Gardon3-0/+57
To support nested virtualization, KVM will sometimes need to write protect pages which are part of a shadowed paging structure or are not writable in the shadowed paging structure. Add a function to write protect GFN mappings for this purpose. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-18-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support disabling dirty logging for the tdp MMUBen Gardon3-0/+63
Dirty logging ultimately breaks down MMU mappings to 4k granularity. When dirty logging is no longer needed, these granaular mappings represent a useless performance penalty. When dirty logging is disabled, search the paging structure for mappings that could be re-constituted into a large page mapping. Zap those mappings so that they can be faulted in again at a higher mapping level. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-17-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support dirty logging for the TDP MMUBen Gardon6-9/+328
Dirty logging is a key feature of the KVM MMU and must be supported by the TDP MMU. Add support for both the write protection and PML dirty logging modes. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-16-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support changed pte notifier in tdp MMUBen Gardon3-1/+67
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add a hook and handle the change_pte MMU notifier. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-15-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add access tracking for tdp_mmuBen Gardon3-7/+128
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. The main Linux MM uses the access tracking MMU notifiers for swap and other features. Add hooks to handle the test/flush HVA (range) family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-14-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMUBen Gardon3-6/+86
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add hooks to handle the invalidate range family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-13-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMUBen Gardon2-3/+14
Attach struct kvm_mmu_pages to every page in the TDP MMU to track metadata, facilitate NX reclaim, and enable inproved parallelism of MMU operations in future patches. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-12-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add TDP MMU PF handlerBen Gardon5-37/+194
Add functions to handle page faults in the TDP MMU. These page faults are currently handled in much the same way as the x86 shadow paging based MMU, however the ordering of some operations is slightly different. Future patches will add eager NX splitting, a fast page fault handler, and parallel page faults. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-22tcp: fix to update snd_wl1 in bulk receiver fast pathNeal Cardwell1-0/+2
In the header prediction fast path for a bulk data receiver, if no data is newly acknowledged then we do not call tcp_ack() and do not call tcp_ack_update_window(). This means that a bulk receiver that receives large amounts of data can have the incoming sequence numbers wrap, so that the check in tcp_may_update_window fails: after(ack_seq, tp->snd_wl1) If the incoming receive windows are zero in this state, and then the connection that was a bulk data receiver later wants to send data, that connection can find itself persistently rejecting the window updates in incoming ACKs. This means the connection can persistently fail to discover that the receive window has opened, which in turn means that the connection is unable to send anything, and the connection's sending process can get permanently "stuck". The fix is to update snd_wl1 in the header prediction fast path for a bulk data receiver, so that it keeps up and does not see wrapping problems. This fix is based on a very nice and thorough analysis and diagnosis by Apollon Oikonomopoulos (see link below). This is a stable candidate but there is no Fixes tag here since the bug predates current git history. Just for fun: looks like the bug dates back to when header prediction was added in Linux v2.1.8 in Nov 1996. In that version tcp_rcv_established() was added, and the code only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer: receiver" code path it does not call tcp_ack(). This fix seems to apply cleanly at least as far back as v3.2. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Link: https://www.spinics.net/lists/netdev/msg692430.html Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22net: Properly typecast int values to set sk_max_pacing_rateKe Li2-2/+3
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate, after extended from 'u32' to 'unsigned long', takes unintentionally hiked value whenever assigned from an 'int' value with MSB=1, due to binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes 0xFFFFFFFF80000000. Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return ~0U unexpectedly. It may also result in increased pacing rate. Fix by explicitly casting the 'int' value to 'unsigned int' before assigning it to sk_max_pacing_rate, for zero extension to happen. Fixes: 76a9ebe811fb ("net: extend sk_pacing_rate to unsigned long") Signed-off-by: Ji Li <jli@akamai.com> Signed-off-by: Ke Li <keli@akamai.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22ARC: perf: redo the pct irq missing in device-tree handlingVineet Gupta1-9/+18
commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq missing in device-tree)" introduced a silly brown-paper bag bug: The assignment and comparison in an if statement were not bracketed correctly leaving the order of evaluation undefined. | | if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | ^^^ ^^^^ And given such a chance, the compiler will bite you hard, fully entitled to generating this piece of beauty: | | # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | | bl.d @platform_get_irq <-- irq returned in r0 | | setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false | brlt.d r0, 0, @.L114 | | st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val | st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1 | | # return __request_percpu_irq(irq, handler, 0, | | bl.d @__request_percpu_irq; | mov_s r0,1 <-- drops even bool and assumes 1 which fails With the snafu fixed, everything is as expected. | bl.d @platform_get_irq <-- returns irq in r0 | | mov_s r2,r0 | brlt.d r2, 0, @.L112 | | st_s r0,[sp] <-- irq isaved is actual return value above | st r0,[r13,160] #arc_pmu.18_27->irq | | bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned | add r4,r4,r12 #, tmp363, __ptr Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-22SMB3: add support for recognizing WSL reparse tagsSteve French1-1/+24
The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they are preferred by the Linux client in some cases since, unlike the NFS reparse tag (or EAs), they don't require an extra query to determine which type of special file they represent. Add support for readdir to recognize special file types of FIFO, SOCKET, CHAR, BLOCK and SYMLINK. This can be tested by creating these special files in WSL Linux and then sharing that location on the Windows server and mounting to the Windows server to access them. Prior to this patch all of the special files would show up as being of type 'file' but with this patch they can be seen with the correct file type as can be seen below: brwxr-xr-x 1 root root 0, 0 Oct 21 17:10 block crwxr-xr-x 1 root root 0, 0 Oct 21 17:46 char drwxr-xr-x 2 root root 0 Oct 21 18:27 dir prwxr-xr-x 1 root root 0 Oct 21 16:21 fifo -rwxr-xr-x 1 root root 0 Oct 21 15:48 file lrwxr-xr-x 1 root root 0 Oct 21 15:52 symlink-to-file TODO: go through all documented reparse tags to see if we can reasonably map some of them to directories vs. files vs. symlinks and also add support for device numbers for block and char devices. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2020-10-22cifs: remove bogus debug codeDan Carpenter1-8/+8
The "end" pointer is either NULL or it points to the next byte to parse. If there isn't a next byte then dereferencing "end" is an off-by-one out of bounds error. And, of course, if it's NULL that leads to an Oops. Printing "*end" doesn't seem very useful so let's delete this code. Also for the last debug statement, I noticed that it should be printing "sequence_end" instead of "end" so fix that as well. Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-10-22smb3.1.1: fix typo in compression flagSteve French1-1/+1
Fix minor typo in new compression flag define Reported-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-10-22cifs: move smb version mount options into fs_context.cRonnie Sahlberg4-97/+99
This and related patches which move mount related code to fs_context.c has the advantage of shriking the code in fs/cifs/connect.c (which had the second most lines of code of any of the files in cifs.ko and was getting harder to read due to its size) and will also make it easier to switch over to the new mount API in the future. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.