| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add helpers for accessing netdevs under netdev_lock().
There's some careful handling needed to find the device and lock it
safely, without it getting unregistered, and without taking rtnl_lock
(the latter being the whole point of the new locking, after all).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect writes to netdev->reg_state with netdev_lock().
From now on holding netdev_lock() is sufficient to prevent
the net_device from getting unregistered, so code which
wants to hold just a single netdev around no longer needs
to hold rtnl_lock.
We do not protect the NETREG_UNREGISTERED -> NETREG_RELEASED
transition. We'd need to move mutex_destroy(netdev->lock)
to .release, but the real reason is that trying to stop
the unregistration process mid-way would be unsafe / crazy.
Taking references on such devices is not safe, either.
So the intended semantics are to lock REGISTERED devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a single buffer XDP is attached, NIC should guarantee only single
page packets will be received.
tcp-data-split feature splits packets into header and payload. single
buffer XDP can't handle it properly.
So attaching single buffer XDP should be disallowed when tcp-data-split
is enabled.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-6-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it.
For example, bnxt_en driver automatically enables if at least one of
LRO/GRO/JUMBO is enabled.
If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns
ENABLES of tcp-data-split, not UNKNOWN.
So, `ethtool -g eth0` shows tcp-data-split is enabled.
The problem is in the setting situation.
In the ethnl_set_rings(), it first calls get_ringparam() to get the
current driver's config.
At that moment, if driver's tcp-data-split config is UNKNOWN, it returns
ENABLE if LRO/GRO/JUMBO is enabled.
Then, it sets values from the user and driver's current config to
kernel_ethtool_ringparam.
Last it calls .set_ringparam().
The driver, especially bnxt_en driver receives
ETHTOOL_TCP_DATA_SPLIT_ENABLED.
But it can't distinguish whether it is set by the user or just the
current config.
When user updates ring parameter, the new hds_config value is updated
and current hds_config value is stored to old_hdsconfig.
Driver's .set_ringparam() callback can distinguish a passed
tcp-data-split value is came from user explicitly.
If .set_ringparam() is failed, hds_config is rollbacked immediately.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_dummy_netdev_core() used to cater to net_devices which
did not come from alloc_netdev_mqs(). Since that's no longer
supported remove the init logic which duplicates alloc_netdev_mqs().
While at it rename back to init_dummy_netdev().
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are no module callers of dev_get_by_napi_id(),
and commit d1cacd747768 ("netdev: prevent accessing NAPI instances
from another namespace") proves that getting NAPI by id
needs to be done with care. So hide dev_get_by_napi_id().
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250110004924.3212260-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc7).
Conflicts:
a42d71e322a8 ("net_sched: sch_cake: Add drop reasons")
737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts")
Adjacent changes:
drivers/net/ethernet/meta/fbnic/fbnic.h
3a856ab34726 ("eth: fbnic: add IRQ reuse support")
95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink code depends on NAPI instances being sorted by ID on
the netdev list for dump continuation. We need to be able to
find the position on the list where we left off if dump does
not fit in a single skb, and in the meantime NAPI instances
can come and go.
This was trivially true when we were assigning a new ID to every
new NAPI instance. Since we added the NAPI config API, we try
to retain the ID previously used for the same queue, but still
add the new NAPI instance at the start of the list.
This is fine if we reset the entire netdev and all NAPIs get
removed and added back. If driver replaces a NAPI instance
during an operation like DEVMEM queue reset, or recreates
a subset of NAPI instances in other ways we may end up with
broken ordering, and therefore Netlink dumps with either
missing or duplicated entries.
At this stage the problem is theoretical. Only two drivers
support queue API, bnxt and gve. gve recreates NAPIs during
queue reset, but it doesn't support NAPI config.
bnxt supports NAPI config but doesn't recreate instances
during reset.
We need to save the ID in the config as soon as it is assigned
because otherwise the new NAPI will not know what ID it will
get at enable time, at the time it is being added.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In commit 66e4c8d95008 ("net: warn if transport header was not set")
I added a debug check in skb_transport_header() to detect
if a caller expects the transport_header to be set to a meaningful
value by a prior code path.
Unfortunately, __netif_receive_skb_core() resets the transport header
to the same value than the network header, defeating this check
in receive paths.
Pretending the transport and network headers are the same
is usually wrong.
This patch removes this reset for CONFIG_DEBUG_NET=y builds
to let fuzzers and CI find bugs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107144342.499759-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0fc2 ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(un)?register_netdevice_notifier_net() hold RTNL before triggering the
notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that the per-netns netdev notifier is protected by per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(un)?register_netdevice_notifier() hold pernet_ops_rwsem and RTNL,
iterate all netns, and trigger the notifier for all netdev.
Let's hold __rtnl_net_lock() before triggering the notifier.
Note that we will need protection for netdev_chain when RTNL is
removed. (e.g. blocking_notifier conversion [0] with a lockdep
annotation [1])
Link: https://lore.kernel.org/netdev/20250104063735.36945-2-kuniyu@amazon.com/ [0]
Link: https://lore.kernel.org/netdev/20250105075957.67334-1-kuniyu@amazon.com/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's hold per-netns RTNL of dev_net(dev) in register_netdev()
and unregister_netdev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
[ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0
[ 496.310300] skb_checksum_help+0x129/0x1f0
[ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0
[ 496.310306] validate_xmit_skb+0x159/0x270
[ 496.310309] validate_xmit_skb_list+0x41/0x70
[ 496.310312] sch_direct_xmit+0x5c/0x250
[ 496.310317] __qdisc_run+0x388/0x620
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header.
Fixes: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iK1hdC3Nt8KPhOtTF8vCPc1AHDCtse_BTNki1pWxAByTQ@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250101164909.1331680-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make the system page pool usable as a source for allocating XDP
frames, we need to register it with xdp_reg_mem_model(), so that page
return works correctly. This is done in preparation for using the system
page_pool to convert XDP_PASS XSk frames to skbs; for the same reason,
make the per-cpu variable non-static so we can access it from other
source files as well (but w/o exporting).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-7-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In lots of places, bpf_prog pointer is used only for tracing or other
stuff that doesn't modify the structure itself. Same for net_device.
Address at least some of them and add `const` attributes there. The
object code didn't change, but that may prevent unwanted data
modifications and also allow more helpers to have const arguments.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make napi_hash_lock IRQ safe. It is used during the control path, and is
taken and released in napi_hash_add and napi_hash_del, which will
typically be called by calls to napi_enable and napi_disable.
This change avoids a deadlock in pcnet32 (and other any other drivers
which follow the same pattern):
CPU 0:
pcnet32_open
spin_lock_irqsave(&lp->lock, ...)
napi_enable
napi_hash_add <- before this executes, CPU 1 proceeds
spin_lock(napi_hash_lock)
[...]
spin_unlock_irqrestore(&lp->lock, flags);
CPU 1:
pcnet32_close
napi_disable
napi_hash_del
spin_lock(napi_hash_lock)
< INTERRUPT >
pcnet32_interrupt
spin_lock(lp->lock) <- DEADLOCK
Changing the napi_hash_lock to be IRQ safe prevents the IRQ from firing
on CPU 1 until napi_hash_lock is released, preventing the deadlock.
Cc: stable@vger.kernel.org
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/85dd4590-ea6b-427d-876a-1d8559c7ad82@roeck-us.net/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202182103.363038-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The napi_suspend_irqs routine bootstraps irq suspension by elongating
the defer timeout to irq_suspend_timeout.
The napi_resume_irqs routine effectively cancels irq suspension by
forcing the napi to be scheduled immediately.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a per-NAPI IRQ suspension parameter, which can be get/set with
netdev-genl.
This patch doesn't change any behavior but prepares the code for other
changes in the following commits which use irq_suspend_timeout as a
timeout for IRQ suspension.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc6).
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/
net/mac80211/cfg.c
c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")
drivers/net/ethernet/intel/ice/ice_ptp_hw.h
6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
e4291b64e118 ("ice: Align E810T GPIO to other products")
ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a persistent NAPI config area for NAPI configuration to the core.
Drivers opt-in to setting the persistent config for a NAPI by passing an
index when calling netif_napi_add_config.
napi_config is allocated in alloc_netdev_mqs, freed in free_netdev
(after the NAPIs are deleted).
Drivers which call netif_napi_add_config will have persistent per-NAPI
settings: NAPI IDs, gro_flush_timeout, and defer_hard_irq settings.
Per-NAPI settings are saved in napi_disable and restored in napi_enable.
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow per-NAPI gro_flush_timeout setting.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device gro_flush_timeout
field. Reads from sysfs will read from the net_device field.
The ability to set gro_flush_timeout on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add defer_hard_irqs to napi_struct in preparation for per-NAPI
settings.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device defer_hard_irq field.
Reads from sysfs show the net_device field.
The ability to set defer_hard_irqs on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hook into netif_set_real_num_tx_queues() to cleanup any shaper
configured on top of the to-be-destroyed TX queues.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/6da4ee03cae2b2a757d7b59e88baf09cc94c5ef1.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the basic infrastructure to implement the net-shaper
core functionality. Each network devices carries a net-shaper cache,
the NL get() operation fetches the data from such cache.
The cache is initially empty, will be fill by the set()/group()
operation implemented later and is destroyed at device cleanup time.
The net_shaper_fill_handle(), net_shaper_ctx_init(), and
net_shaper_generic_pre() implementations handle generic index type
attributes, despite the current caller always pass a constant value
to avoid more noise in later patches using them with different
attributes.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ddd10fd645a9367803ad02fca4a5664ea5ace170.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One path takes care of SKB_GSO_DODGY, assuming
skb->len is bigger than hdr_len.
virtio_net_hdr_to_skb() does not fully dissect TCP headers,
it only make sure it is at least 20 bytes.
It is possible for an user to provide a malicious 'GSO' packet,
total length of 80 bytes.
- 20 bytes of IPv4 header
- 60 bytes TCP header
- a small gso_size like 8
virtio_net_hdr_to_skb() would declare this packet as a normal
GSO packet, because it would see 40 bytes of payload,
bigger than gso_size.
We need to make detect this case to not underflow
qdisc_skb_cb(skb)->pkt_len.
Fixes: 1def9238d4aa ("net_sched: more precise pkt_len computation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After commit 7c6d2ecbda83 ("net: be more gentle about silly gso
requests coming from user") virtio_net_hdr_to_skb() had sanity check
to detect malicious attempts from user space to cook a bad GSO packet.
Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count
transport header in UFO") while fixing one issue, allowed user space
to cook a GSO packet with the following characteristic :
IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28.
When this packet arrives in qdisc_pkt_len_init(), we end up
with hdr_len = 28 (IPv4 header + UDP header), matching skb->len
Then the following sets gso_segs to 0 :
gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
shinfo->gso_size);
Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/
qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len;
This leads to the following crash in fq_codel [1]
qdisc_pkt_len_init() is best effort, we only want an estimation
of the bytes sent on the wire, not crashing the kernel.
This patch is fixing this particular issue, a following one
adds more sanity checks for another potential bug.
[1]
[ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 70.724561] #PF: supervisor read access in kernel mode
[ 70.724561] #PF: error_code(0x0000) - not-present page
[ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0
[ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI
[ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991
[ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel
[ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49
All code
========
0: 24 08 and $0x8,%al
2: 49 c1 e1 06 shl $0x6,%r9
6: 44 89 7c 24 18 mov %r15d,0x18(%rsp)
b: 45 31 ed xor %r13d,%r13d
e: 45 31 c0 xor %r8d,%r8d
11: 31 ff xor %edi,%edi
13: 89 44 24 14 mov %eax,0x14(%rsp)
17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9
1e: eb 04 jmp 0x24
20: 39 ca cmp %ecx,%edx
22: 73 37 jae 0x5b
24: 4d 8b 39 mov (%r9),%r15
27: 83 c7 01 add $0x1,%edi
2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction
2d: 49 89 11 mov %rdx,(%r9)
30: 41 8b 57 28 mov 0x28(%r15),%edx
34: 45 8b 5f 34 mov 0x34(%r15),%r11d
38: 49 c7 07 00 00 00 00 movq $0x0,(%r15)
3f: 49 rex.WB
Code starting with the faulting instruction
===========================================
0: 49 8b 17 mov (%r15),%rdx
3: 49 89 11 mov %rdx,(%r9)
6: 41 8b 57 28 mov 0x28(%r15),%edx
a: 45 8b 5f 34 mov 0x34(%r15),%r11d
e: 49 c7 07 00 00 00 00 movq $0x0,(%r15)
15: 49 rex.WB
[ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202
[ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000
[ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
[ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000
[ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58
[ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000
[ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000
[ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0
[ 70.724561] Call Trace:
[ 70.724561] <TASK>
[ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715)
[ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539)
[ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
[ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel
[ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784)
[ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2))
[ 70.724561] ? irqentry_enter (kernel/entry/common.c:237)
[ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2))
[ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4))
[ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702)
[ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1))
[ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1))
[ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4))
[ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1))
[ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1))
[ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355)
[ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1))
[ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
[ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 70.724561] RIP: 0033:0x41ae09
Fixes: cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.
This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.
Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.
Fixes: 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
For device memory TCP, we expect the skb headers to be available in host
memory for access, and we expect the skb frags to be in device memory
and unaccessible to the host. We expect there to be no mixing and
matching of device memory frags (unaccessible) with host memory frags
(accessible) in the same skb.
Add a skb->devmem flag which indicates whether the frags in this skb
are device memory frags or not.
__skb_fill_netmem_desc() now checks frags added to skbs for net_iov,
and marks the skb as skb->devmem accordingly.
Add checks through the network stack to avoid accessing the frags of
devmem skbs and avoid coalescing devmem skbs with non devmem skbs.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make skb_frag_page() fail in the case where the frag is not backed
by a page, and fix its relevant callers to handle this case.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_pick_tx_cpu_id() has been introduced with two users by
commit a4ea8a3dacc3 ("net: Add generic ndo_select_queue functions").
The use in AF_PACKET has been removed in 2019 by
commit b71b5837f871 ("packet: rework packet_pick_tx_queue() to use common code selection")
The other user was a Netlogic XLP driver, removed in 2021 by
commit 47ac6f567c28 ("staging: Remove Netlogic XLP network driver").
It's relatively unlikely that any modern driver will need an
.ndo_select_queue implementation which picks purely based on CPU ID
and skips XPS, delete dev_pick_tx_cpu_id()
Found by code inspection.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240906161059.715546-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904093243.3345012-6-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The deprecated helper strcpy() performs no bounds checking on the
destination buffer. This could result in linear overflows beyond
the end of the buffer, leading to all kinds of misbehaviors.
The safe replacement is strscpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in net/core.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-13-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When soft interrupt actions are called, they are passed a pointer to the
struct softirq action which contains the action's function pointer.
This pointer isn't useful, as the action callback already knows what
function it is. And since each callback handles a specific soft interrupt,
the callback also knows which soft interrupt number is running.
No soft interrupt action callback actually uses this parameter, so remove
it from the function pointer signature. This clarifies that soft interrupt
actions are global routines and makes it slightly cheaper to call them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/20240815171549.3260003-1-csander@purestorage.com
|
|
when packet is enqueued with nfqueue and GSO is enabled, checksum
calculation has to take into account the protocol, as SCTP uses a
32 bits CRC checksum.
Enter skb_gso_segment() path in case of SCTP GSO packets because
skb_zerocopy() does not support for GSO_BY_FRAGS.
Joint work with Pablo.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add missing __percpu qualifier to a (void *) cast to fix
dev.c:10863:45: warning: cast removes address space '__percpu' of expression
sparse warning. Also remove now unneeded __force sparse directives.
Found by GCC's named address space checks.
There were no changes in the resulting object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://patch.msgid.link/20240814070748.943671-1-ubizjak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP segmentation offload inherently depends on checksum offload. It should
not be possible to disable checksum offload while leaving USO enabled.
Enforce this dependency in code.
There is a single tx-udp-segmentation feature flag to indicate support for
both IPv4/6, hence the devices wishing to support USO must offer checksum
offload for both IP versions.
Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Jakub Kicinski
Taehee Yoo
Eric Dumazet
Kuniyuki Iwashima
Willem de Bruijn
Toke Høiland-Jørgensen
Alexander Lobakin
Joe Damato
Martin Karsten
Benoît Monin
Paolo Abeni
Daniel Borkmann
Linus Torvalds
Mina Almasry
Hongbo Li
Simon Horman
Maxime Chevallier
Caleb Sander Mateos
Antonio Ojea
Uros Bizjak
Jakub Sitnicki