aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/net/unix/sysctl_net_unix.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-09-24rxrpc: Reinitialise the call ACK and timer state for client reply phaseDavid Howells3-0/+11
Clear the ACK reason, ACK timer and resend timer when entering the client reply phase when the first DATA packet is received. New ACKs will be proposed once the data is queued. The resend timer is no longer relevant and we need to cancel ACKs scheduled to probe for a lost reply. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24rxrpc: Include the last reply DATA serial number in the final ACKDavid Howells1-3/+3
In a client call, include the serial number of the last DATA packet of the reply in the final ACK. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24rxrpc: Send an immediate ACK if we fill in a holeDavid Howells1-1/+9
Send an immediate ACK if we fill in a hole in the buffer left by an out-of-sequence packet. This may allow the congestion management in the peer to avoid a retransmission if packets got reordered on the wire. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24rxrpc: Send an ACK after every few DATA packets we receiveDavid Howells4-9/+33
Send an ACK if we haven't sent one for the last two packets we've received. This keeps the other end apprised of where we've got to - which is important if they're doing slow-start. We do this in recvmsg so that we can dispatch a packet directly without the need to wake up the background thread. This should possibly be made configurable in future. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24hv_netvsc: fix commentsStephen Hemminger1-4/+3
Typo's and spelling errors. Also remove old comment from staging era. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net: thunderx: Support for byte queue limitsSunil Goutham2-12/+32
This patch adds support for byte queue limits Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net: thunderx: Fix issue with IRQ namimgSunil Goutham1-1/+1
This patch fixes a regression caused by previous commit when irq name exceeds 20 byte array if interface's name size is large. Fixes: e412621394fa ("net: thunderx: Use netdev's name for naming VF's interrupts") Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24mlxsw: spectrum: remove redundant check if err is zeroColin Ian King1-1/+1
There is an earlier check and return if err is non-zero, so the check to see if it is zero is redundant in every iteration of the loop and hence the check can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24Documentation: devicetree: fix typo in MediaTek ethernet device-tree bindingSean Wang1-1/+1
fix typo in Documentation/devicetree/bindings/net/mediatek-net.txt Cc: devicetree@vger.kernel.org Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24Documentation: devicetree: revise ethernet device-tree binding about TRGMIISean Wang1-2/+2
add phy-mode "trgmii" to Documentation/devicetree/bindings/net/ethernet.txt Cc: devicetree@vger.kernel.org Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net/mlx4: Add VF vlan protocol 802.1ad supportMoshe Shemesh5-12/+138
Move the vf to VST 802.1ad mode (mlx4 VST QinQ mode) by setting vf vlan protocol to 802.1ad. VST 802.1ad mode in mlx4, is used for STAG strip/insertion by PF, while the CTAG is set by the VF. Read current vlan protocol as part of the vf configuration state. Upon setting vf vlan protocol to 802.1ad, we use a mechanism of handshake to verify that both the vf and the pf driver version support it. The handshake uses the command QUERY_FUNC_CAP: - The vf sets a pre-defined support bit in input modifier. - A pf that supports the feature sends the request to the vf through a pre-defined field in the output mailbox. - In case vf does not support the feature, the pf will fail the control command (in this case, IP link tool command to set the vf vlan protocol to 802.1ad). No change in VST 802.1Q mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net: Update API for VF vlan protocol 802.1ad supportMoshe Shemesh23-42/+161
Introduce new rtnl UAPI that exposes a list of vlans per VF, giving the ability for user-space application to specify it for the VF, as an option to support 802.1ad. We adjusted IP Link tool to support this option. For future use cases, the new UAPI supports multiple vlans. For now we limit the list size to a single vlan in kernel. Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward compatibility with older versions of IP Link tool. Add a vlan protocol parameter to the ndo_set_vf_vlan callback. We kept 802.1Q as the drivers' default vlan protocol. Suitable ip link tool command examples: Set vf vlan protocol 802.1ad: ip link set eth0 vf 1 vlan 100 proto 802.1ad Set vf to VST (802.1Q) mode: ip link set eth0 vf 1 vlan 100 proto 802.1Q Or by omitting the new parameter ip link set eth0 vf 1 vlan 100 Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net/mlx4_en: Disable vlan HW acceleration when in VF vlan protocol 802.1ad modeMoshe Shemesh1-0/+13
In Ethernet VF, disable vlan HW acceleration on VF while it is set to VF vlan protocol 802.1ad mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net/mlx4_core: Preparation for VF vlan protocol 802.1adMoshe Shemesh6-13/+78
Check device capability to support VF vlan protocol 802.1ad mode. Add vport attribute vlan protocol. Init vport vlan protocol by default to 802.1Q. Add update QP support for VF vlan protocol 802.1ad. Add func capability vlan_offload_disable to disable all vlan HW acceleration on VF while the VF is set to VF vlan protocol 802.1ad mode. No change in VF vlan protocol 802.1Q (VST) mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net/mlx4_core: Fix QUERY FUNC CAP flagsMoshe Shemesh2-4/+3
Separate QUERY_FUNC_CAP flags0 from QUERY_FUNC_CAP flags, as 'flags' is already used for another set of flags in FUNC CAP, while phv bit should be part of a different set of flags. Remove QUERY_FUNC_CAP port_flags field, as it is not in use. Fixes: 77fc29c4bbbb ('net/mlx4_core: Preparations for 802.1ad VLAN support') Fixes: 5cc914f10851 ('mlx4_core: Added FW commands and their wrappers for supporting SRIOV') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23rxrpc: Add a tracepoint to log which packets will be retransmittedDavid Howells2-0/+29
Add a tracepoint to log in rxrpc_resend() which packets will be retransmitted. Note that if a positive ACK comes in whilst we have dropped the lock to retransmit another packet, the actual retransmission may not happen, though some of the effects will (such as altering the congestion management). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Add tracepoint for ACK proposalDavid Howells8-30/+114
Add a tracepoint to log proposed ACKs, including whether the proposal is used to update a pending ACK or is discarded in favour of an easlier, higher priority ACK. Whilst we're at it, get rid of the rxrpc_acks() function and access the name array directly. We do, however, need to validate the ACK reason number given to trace_rxrpc_rx_ack() to make sure we don't overrun the array. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Add a tracepoint to log injected Rx packet lossDavid Howells2-6/+26
Add a tracepoint to log received packets that get discarded due to Rx packet loss. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Add data Tx tracepoint and adjust Tx ACK tracepointDavid Howells3-12/+48
Add a tracepoint to log transmission of DATA packets (including loss injection). Adjust the ACK transmission tracepoint to include the packet serial number and to line this up with the DATA transmission display. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Add a tracepoint for the call timerDavid Howells6-7/+65
Add a tracepoint to log call timer initiation, setting and expiry. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Don't call the tx_ack tracepoint if don't generate an ACKDavid Howells1-15/+11
rxrpc_send_call_packet() is invoking the tx_ack tracepoint before it checks whether there's an ACK to transmit (another thread may jump in and transmit it). Fix this by only invoking the tracepoint if we get a valid ACK to transmit. Further, only allocate a serial number if we're going to actually transmit something. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Pass the last Tx packet marker in the annotation bufferDavid Howells4-45/+81
When the last packet of data to be transmitted on a call is queued, tx_top is set and then the RXRPC_CALL_TX_LAST flag is set. Unfortunately, this leaves a race in the ACK processing side of things because the flag affects the interpretation of tx_top and also allows us to start receiving reply data before we've finished transmitting. To fix this, make the following changes: (1) rxrpc_queue_packet() now sets a marker in the annotation buffer instead of setting the RXRPC_CALL_TX_LAST flag. (2) rxrpc_rotate_tx_window() detects the marker and sets the flag in the same context as the routines that use it. (3) rxrpc_end_tx_phase() is simplified to just shift the call state. The Tx window must have been rotated before calling to discard the last packet. (4) rxrpc_receiving_reply() is added to handle the arrival of the first DATA packet of a reply to a client call (which is an implicit ACK of the Tx phase). (5) The last part of rxrpc_input_ack() is reordered to perform Tx rotation, then soft-ACK application and then to end the phase if we've rotated the last packet. In the event of a terminal ACK, the soft-ACK application will be skipped as nAcks should be 0. (6) rxrpc_input_ackall() now has to rotate as well as ending the phase. In addition: (7) Alter the transmit tracepoint to log the rotation of the last packet. (8) Remove the no-longer relevant queue_reqack tracepoint note. The ACK-REQUESTED packet header flag is now set as needed when we actually transmit the packet and may vary by retransmission. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Fix call timerDavid Howells2-13/+16
Fix the call timer in the following ways: (1) If call->resend_at or call->ack_at are before or equal to the current time, then ignore that timeout. (2) If call->expire_at is before or equal to the current time, then don't set the timer at all (possibly we should queue the call). (3) Don't skip modifying the timer if timer_pending() is true. This indicates that the timer is working, not that it has expired and is running/waiting to run its expiry handler. Also call rxrpc_set_timer() to start the call timer going rather than calling add_timer(). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Fix accidental cancellation of scheduled resend by ACK parserDavid Howells1-0/+2
When rxrpc_input_soft_acks() is parsing the soft-ACKs from an ACK packet, it updates the Tx packet annotations in the annotation buffer. If a soft-ACK is an ACK, then we overwrite unack'd, nak'd or to-be-retransmitted states and that is fine; but if the soft-ACK is an NACK, we overwrite the to-be-retransmitted with a nak - which isn't. Instead, we need to let any scheduled retransmission stand if the packet was NAK'd. Note that we don't reissue a resend if the annotation is in the to-be-retransmitted state because someone else must've scheduled the resend already. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23Revert "xen-netback: create a debugfs node for hash information"David S. Miller3-107/+2
This reverts commit c0c64c152389ad73306b9b0796357210ec6d32ee. There is no vif->ctrl_task member, so this change broke the build. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23rxrpc: Need to start the resend timer on initial transmissionDavid Howells3-1/+11
When a DATA packet has its initial transmission, we may need to start or adjust the resend timer. Without this we end up relying on being sent a NACK to initiate the resend. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Use before_eq() and friends to compare serial numbersDavid Howells1-1/+1
before_eq() and friends should be used to compare serial numbers (when not checking for (non)equality) rather than casting to int, subtracting and checking the result. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23bpf: add helper to invalidate hashDaniel Borkmann2-0/+25
Add a small helper that complements 36bbef52c7eb ("bpf: direct packet write and access for helpers for clsact progs") for invalidating the current skb->hash after mangling on headers via direct packet write. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23bpf: use bpf_get_smp_processor_id_proto instead of raw oneDaniel Borkmann1-0/+2
Same motivation as in commit 80b48c445797 ("bpf: don't use raw processor id in generic helper"), but this time for XDP typed programs. Thus, allow for preemption checks when we have DEBUG_PREEMPT enabled, and otherwise use the raw variant. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23bpf: use skb_to_full_sk helper in bpf_skb_under_cgroupDaniel Borkmann1-1/+1
We need to use skb_to_full_sk() helper introduced in commit bd5eb35f16a9 ("xfrm: take care of request sockets") as otherwise we miss tcp synack messages, since ownership is on request socket and therefore it would miss the sk_fullsock() check. Use skb_to_full_sk() as also done similarly in the bpf_get_cgroup_classid() helper via 2309236c13fe ("cls_cgroup: get sk_classid only from full sockets") fix to not let this fall through. Fixes: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: count multicast packets receivedStephen Hemminger2-1/+10
Useful for debugging issues with multicast and SR-IOV to keep track of number of received multicast packets. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: remove VF in flight countersStephen Hemminger2-63/+21
Since VF reference is now protected by RCU, no longer need the VF usage counter and can use device flags to see whether to inject or not. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: use RCU to protect vf_netdevStephen Hemminger2-15/+16
The vf_netdev pointer in the netvsc device context can simply be protected by RCU because network device destruction is already RCU synchronized. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: improve VF device matchingStephen Hemminger1-21/+39
The code to associate netvsc and VF devices can be made less error prone by using a better matching algorithms. On registration, use the permanent address which avoids any possible issues caused by device MAC address being changed. For all other callbacks, search by the netdevice pointer value to ensure getting the correct network device. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: simplify callback event codeStephen Hemminger1-18/+10
The callback handler for netlink events can be simplified: * Consolidate check for netlink callback events about this driver itself. * Ignore non-Ethernet devices. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: dev hold/put reference to VFStephen Hemminger1-0/+3
The netvsc driver holds a pointer to the virtual function network device if managing SR-IOV association. In order to ensure that the VF network device does not disappear, it should be using dev_hold/dev_put to get a reference count. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23hv_netvsc: use consume_skbStephen Hemminger1-2/+2
Packets that are transmitted in normal path should use consume_skb instead of kfree_skb. This allows for better tracing of packet drops. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net: dsa: mv88e6xxx: implement DSA port fast ageingVivien Didelot1-22/+23
Now that the DSA layer handles port fast ageing on correct STP change, simplify _mv88e6xxx_port_state and implement mv88e6xxx_port_fast_age. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net: dsa: b53: implement DSA port fast ageingVivien Didelot1-20/+11
Remove the fast ageing logic from b53_br_set_stp_state and implement the new DSA switch port_fast_age operation instead. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net: dsa: add port fast ageingVivien Didelot2-0/+20
Today the DSA drivers are in charge of flushing the MAC addresses associated to a port when its STP state changes from Learning or Forwarding, to Disabled or Blocking or Listening. This makes the drivers more complex and hides the generic switch logic. Introduce a new optional port_fast_age operation to dsa_switch_ops, to move this logic to the DSA layer and keep drivers simple. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net: dsa: add port STP state helperVivien Didelot1-7/+10
Add a void helper to set the STP state of a port, checking first if the required routine is provided by the driver. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23drivers: net: xgene: Fix MSS programmingIyappan Subramanian4-23/+100
Current driver programs static value of MSS in hardware register for TSO offload engine to segment the TCP payload regardless the MSS value provided by network stack. This patch fixes this by programming hardware registers with the stack provided MSS value. Since the hardware has the limitation of having only 4 MSS registers, this patch uses reference count of mss values being used. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23rxrpc: Should be using ktime_add_ms() not ktime_add_ns()David Howells1-1/+1
ktime_add_ms() should be used to add the resend time (in ms) rather than ktime_add_ns(). Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Make sure sendmsg() is woken on call completionDavid Howells1-0/+1
Make sure that sendmsg() gets woken up if the call it is waiting for completes abnormally. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Don't send an ACK at the end of service call response transmissionDavid Howells1-2/+0
Don't send an IDLE ACK at the end of the transmission of the response to a service call. The service end resends DATA packets until the client sends an ACK that hard-acks all the send data. At that point, the call is complete. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23rxrpc: Preset timestamp on Tx sk_buffsDavid Howells1-0/+5
Set the timestamp on sk_buffs holding packets to be transmitted before queueing them because the moment the packet is on the queue it can be seen by the retransmission algorithm - which may see a completely random timestamp. If the retransmission algorithm sees such a timestamp, it may retransmit the packet and, in future, tell the congestion management algorithm that the retransmit timer expired. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-23cxgb4: fix signed wrap around when decrementing index idxColin Ian King1-1/+1
Change predecrement compare to post decrement compare to avoid an unsigned integer wrap-around comparison when decrementing idx in the while loop. For example, when idx is zero, the current situation will predecrement idx in the while loop, wrapping idx to the maximum signed integer and cause out of bounds reads on rxq_info->msix_tbl[idx]. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5e: Add TC vlan match parsingOr Gerlitz1-0/+19
Enhance the parsing of offloaded TC rules matches to handle vlans. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5e: Add TC vlan action for SRIOV offloadsOr Gerlitz1-11/+32
Parse TC vlan actions and set the required elements to allow offloading. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23net/mlx5: E-Switch, Support VLAN actions in the offloads modeOr Gerlitz5-1/+249
Many virtualization systems use a policy under which a vlan tag is pushed to packets sent by guests, and popped before the packet is forwarded to the VM. The current generation of the mlx5 HW doesn't fully support that on a per flow level. As such, we are addressing the above common use case with the SRIOV e-Switch abilities to push vlan into packets sent by VFs and pop vlan from packets forwarded to VFs. The HW can match on the correct vlan being present in packets forwarded to VFs (eSwitch steering is done before stripping the tag), so this part is offloaded as is. A common practice for vlans is to avoid both push vlan and pop vlan for inter-host VM/VM (east-west) communication because in this case, push on egress cancels out with pop on ingress. For supporting that, we use a global eswitch vlan pop policy, hence allowing guest A to communicate with both remote VM B and local VM C. This works since the HW pops the vlan only if it exists (e.g for C --> A packets but not for B --> A packets). On the slow path, when a VF vport has an offloaded flow which involves pushing vlans, wheres another flow is not currently offloaded, the packets from the 2nd flow seen by the VF representor on the host have vlan. The VF rep driver removes such vlan before calling into the host networking stack. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.