aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-31netlink: split up copies in the ack constructionJakub Kicinski1-9/+20
Clean up the use of unsafe_memcpy() by adding a flexible array at the end of netlink message header and splitting up the header and data copies. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28net/packet: add PACKET_FANOUT_FLAG_IGNORE_OUTGOINGWillem de Bruijn1-0/+1
Extend packet socket option PACKET_IGNORE_OUTGOING to fanout groups. The socket option sets ptype.ignore_outgoing, which makes dev_queue_xmit_nit skip the socket. When the socket joins a fanout group, the option is not reflected in the struct ptype of the group. dev_queue_xmit_nit only tests the fanout ptype, so the flag is ignored once a socket joins a fanout group. Inheriting the option from a socket would change established behavior. Different sockets in the group can set different flags, and can also change them at runtime. Testing in packet_rcv_fanout defeats the purpose of the original patch, which is to avoid skb_clone in dev_queue_xmit_nit (esp. for MSG_ZEROCOPY packets). Instead, introduce a new fanout group flag with the same behavior. Tested with https://github.com/wdebruij/kerneltools/blob/master/tests/test_psock_fanout_ignore_outgoing.c Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221027211014.3581513-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (net).Thomas Gleixner16-45/+44
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28Kalle Valo says:Jakub Kicinski30-376/+693
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28tcp: add rcv_wnd and plb_rehash to TCP_INFOMubashir Adnan Qureshi1-0/+2
rcv_wnd can be useful to diagnose TCP performance where receiver window becomes the bottleneck. rehash reports the PLB and timeout triggered rehash attempts by the TCP connection. Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28tcp: add u32 counter in tcp_sock and an SNMP counter for PLBMubashir Adnan Qureshi3-0/+6
A u32 counter is added to tcp_sock for counting the number of PLB triggered rehashes for a TCP connection. An SNMP counter is also added to count overall PLB triggered rehash events for a host. These counters are hooked up to PLB implementation for DCTCP. TCP_NLA_REHASH is added to SCM_TIMESTAMPING_OPT_STATS that reports the rehash attempts triggered due to PLB or timeouts. This gives a historical view of sustained congestion or timeouts experienced by the TCP connection. Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28tcp: add support for PLB in DCTCPMubashir Adnan Qureshi1-1/+22
PLB support is added to TCP DCTCP code. As DCTCP uses ECN as the congestion signal, PLB also uses ECN to make decisions whether to change the path or not upon sustained congestion. Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28tcp: add PLB functionality for TCPMubashir Adnan Qureshi3-2/+109
Congestion control algorithms track PLB state and cause the connection to trigger a path change when either of the 2 conditions is satisfied: - No packets are in flight and (# consecutive congested rounds >= sysctl_tcp_plb_idle_rehash_rounds) - (# consecutive congested rounds >= sysctl_tcp_plb_rehash_rounds) A round (RTT) is marked as congested when congestion signal (ECN ce_ratio) over an RTT is greater than sysctl_tcp_plb_cong_thresh. In the event of RTO, PLB (via tcp_write_timeout()) triggers a path change and disables congestion-triggered path changes for random time between (sysctl_tcp_plb_suspend_rto_sec, 2*sysctl_tcp_plb_suspend_rto_sec) to avoid hopping onto the "connectivity blackhole". RTO-triggered path changes can still happen during this cool-off period. Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28tcp: add sysctls for TCP PLB parametersMubashir Adnan Qureshi2-0/+51
PLB (Protective Load Balancing) is a host based mechanism for load balancing across switch links. It leverages congestion signals(e.g. ECN) from transport layer to randomly change the path of the connection experiencing congestion. PLB changes the path of the connection by changing the outgoing IPv6 flow label for IPv6 connections (implemented in Linux by calling sk_rethink_txhash()). Because of this implementation mechanism, PLB can currently only work for IPv6 traffic. For more information, see the SIGCOMM 2022 paper: https://doi.org/10.1145/3544216.3544226 This commit adds new sysctl knobs and sets their default values for TCP PLB. Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski8-30/+621
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) Move struct nft_payload_set definition to .c file where it is only used. 2) Shrink transport and inner header offset fields in the nft_pktinfo structure to 16-bits, from Florian Westphal. 3) Get rid of nft_objref Kbuild toggle, make it built-in into nf_tables. This expression is used to instantiate conntrack helpers in nftables. After removing the conntrack helper auto-assignment toggle it this feature became more important so move it to the nf_tables core module. Also from Florian. 4) Extend the existing function to calculate payload inner header offset to deal with the GRE and IPIP transport protocols. 6) Add inner expression support for nf_tables. This new expression provides a packet parser for tunneled packets which uses a userspace description of the expected inner headers. The inner expression invokes the payload expression (via direct call) to match on the inner header protocol fields using the inner link, network and transport header offsets. An example of the bytecode generated from userspace to match on IP source encapsulated in a VxLAN packet: # nft --debug=netlink add rule netdev x y udp dport 4789 vxlan ip saddr 1.2.3.4 netdev x y [ meta load l4proto => reg 1 ] [ cmp eq reg 1 0x00000011 ] [ payload load 2b @ transport header + 2 => reg 1 ] [ cmp eq reg 1 0x0000b512 ] [ inner type vxlan hdrsize 8 flags f [ meta load protocol => reg 1 ] ] [ cmp eq reg 1 0x00000008 ] [ inner type vxlan hdrsize 8 flags f [ payload load 4b @ network header + 12 => reg 1 ] ] [ cmp eq reg 1 0x04030201 ] 7) Store inner link, network and transport header offsets in percpu area to parse inner packet header once only. Matching on a different tunnel type invalidates existing offsets in the percpu area and it invokes the inner tunnel parser again. 8) Add support for inner meta matching. This support for NFTA_META_PROTOCOL, which specifies the inner ethertype, and NFT_META_L4PROTO, which specifies the inner transport protocol. 9) Extend nft_inner to parse GENEVE optional fields to calculate the link layer offset. 10) Update inner expression so tunnel offset points to GRE header to normalize tunnel header handling. This also allows to perform different interpretations of the GRE header from userspace. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nft_inner: set tunnel offset to GRE header offset netfilter: nft_inner: add geneve support netfilter: nft_meta: add inner match support netfilter: nft_inner: add percpu inner context netfilter: nft_inner: support for inner tunnel header matching netfilter: nft_payload: access ipip payload for inner offset netfilter: nft_payload: access GRE payload via inner offset netfilter: nft_objref: make it builtin netfilter: nf_tables: reduce nft_pktinfo by 8 bytes netfilter: nft_payload: move struct nft_payload_set definition where it belongs ==================== Link: https://lore.kernel.org/r/20221026132227.3287-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski17-106/+174
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c 2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion") abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start") 8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27kcm: do not sense pfmemalloc status in kcm_sendpage()Eric Dumazet1-1/+1
Similar to changes done in TCP in blamed commit. We should not sense pfmemalloc status in sendpage() methods. Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221027040637.1107703-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net: do not sense pfmemalloc status in skb_append_pagefrags()Eric Dumazet1-1/+1
skb_append_pagefrags() is used by af_unix and udp sendpage() implementation so far. In commit 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status") we explained why we should not sense pfmemalloc status for pages owned by user space. We should also use skb_fill_page_desc_noacc() in skb_append_pagefrags() to avoid following KCSAN report: BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:323 [inline] lru_add_fn+0x327/0x410 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 lru_add_drain_cpu+0x73/0x250 mm/swap.c:669 lru_add_drain+0x21/0x60 mm/swap.c:773 free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311 tlb_batch_pages_flush mm/mmu_gather.c:59 [inline] tlb_flush_mmu_free mm/mmu_gather.c:256 [inline] tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263 tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363 exit_mmap+0x190/0x4d0 mm/mmap.c:3098 __mmput+0x27/0x1b0 kernel/fork.c:1185 mmput+0x3d/0x50 kernel/fork.c:1207 copy_process+0x19fc/0x2100 kernel/fork.c:2518 kernel_clone+0x166/0x550 kernel/fork.c:2671 __do_sys_clone kernel/fork.c:2812 [inline] __se_sys_clone kernel/fork.c:2796 [inline] __x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1817 [inline] __skb_fill_page_desc include/linux/skbuff.h:2432 [inline] skb_fill_page_desc include/linux/skbuff.h:2453 [inline] skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974 unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea00058fc188 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-canJakub Kicinski1-1/+3
Marc Kleine-Budde says: ==================== pull-request: can 2022-10-27 Anssi Hannula fixes the use of the completions in the kvaser_usb driver. Biju Das contributes 2 patches for the rcar_canfd driver. A IRQ storm that can be triggered by high CAN bus load and channel specific IRQ handlers are fixed. Yang Yingliang fixes the j1939 transport protocol by moving a kfree_skb() out of a spin_lock_irqsave protected section. * tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb() can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive can: kvaser_usb: Fix possible completions during init_completion ==================== Link: https://lore.kernel.org/r/20221027114356.1939821-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27nh: fix scope used to find saddr when adding non gw nhNicolas Dichtel1-1/+1
As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but fib_info_update_nhc_saddr() needs the scope of the route, which is the scope "before" fib_nh_scope, ie fib_nh_scope - 1. This patch fixes the problem described in commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/ Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Revert "ip: fix dflt addr selection for connected nexthop"Nicolas Dichtel1-1/+1
This reverts commit 747c14307214b55dbd8250e1ab44cad8305756f1. As explained by Julian, nhc_scope is related to nhc_gw, not to the route. Revert the original patch. The initial problem is fixed differently in the next commit. Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/ Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Revert "ip: fix triggering of 'icmp redirect'"Nicolas Dichtel1-2/+2
This reverts commit eb55dc09b5dd040232d5de32812cc83001a23da6. The patch that introduces this bug is reverted right after this one. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27genetlink: limit the use of validation workarounds to old opsJakub Kicinski1-0/+2
During review of previous change another thing came up - we should limit the use of validation workarounds to old commands. Don't list the workarounds one by one, as we're rejecting all existing ones. We can deal with the masking in the unlikely event that new flag is added. Link: https://lore.kernel.org/all/6ba9f727e555fd376623a298d5d305ad408c3d47.camel@sipsolutions.net/ Link: https://lore.kernel.org/r/20221026001524.1892202-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27skbuff: Proactively round up to kmalloc bucket sizeKees Cook1-26/+26
Instead of discovering the kmalloc bucket size _after_ allocation, round up proactively so the allocation is explicitly made for the full size, allowing the compiler to correctly reason about the resulting size of the buffer through the existing __alloc_size() hint. This will allow for kernels built with CONFIG_UBSAN_BOUNDS or the coming dynamic bounds checking under CONFIG_FORTIFY_SOURCE to gain back the __alloc_size() hints that were temporarily reverted in commit 93dd04ab0b2b ("slab: remove __alloc_size attribute from __kmalloc_track_caller") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221021234713.you.031-kees@kernel.org/ Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221025223811.up.360-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()Yang Yingliang1-1/+3
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. The skb is unlinked from the queue, so it can be freed after spin_unlock_irqrestore(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com Cc: stable@vger.kernel.org [mkl: adjust subject] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27openvswitch: switch from WARN to pr_warnAaron Conole1-1/+2
As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still preserve the warning to the user that feature downgrade occurred. We likely cannot introduce other kinds of checks / enforcement here because syzbot can generate different genl versions to the datapath. Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-26net/rds: remove variable total_copiedColin Ian King1-2/+0
Variable total_copied is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221024135046.2159523-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26mptcp: fix tracking issue in mptcp_subflow_create_socket()Eric Dumazet1-0/+2
My recent patch missed that mptcp_subflow_create_socket() was creating a 'kernel' socket, then converted it to 'user' socket. Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20221025180546.652251-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26Merge tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-nextJakub Kicinski1-2/+2
Re-pull from Stefan to fix the warnings. Stefan Schmidt says: ==================== pull-request v2: ieee802154-next 2022-10-26 * tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next: net: mac802154: Fixup function parameter name in docs ==================== Link: https://lore.kernel.org/r/20221026075638.578840-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26Merge tag 'ieee802154-for-net-next-2022-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-nextDavid S. Miller9-152/+444
Stefan Schmidt says: ==================== == One of the biggest cycles for ieee802154 in a long time. We are landing the first pieces of a big enhancements in managing PAN's. We might have another pull request ready for this cycle later on, but I want to get this one out first. Miquel Raynal added support for sending frames synchronously as a dependency to handle MLME commands. Also introducing more filtering levels to match with the needs of a device when scanning or operating as a pan coordinator. To support development and testing the hwsim driver for ieee802154 was also enhanced for the new filtering levels and to update the PIB attributes. Alexander Aring fixed quite a few bugs spotted during reviewing changes. He also added support for TRAC in the atusb driver to have better failure handling if the firmware provides the needed information. Jilin Yuan fixed a comment with a repeated word in it. ================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextDavid S. Miller1-1/+1
Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first patch is by Daniel S. Trevitz and adds documentation for switchable termination resistors. Zhang Changzhong's patch fixes a debug output in the j13939 stack. Oliver Hartkopp finally removes the pch_can driver, which is superseded by the generic c_can driver. Gustavo A. R. Silva replaces a zero-length array with DECLARE_FLEX_ARRAY() in the ucan driver. Kees Cook's patch removes a no longer needed silencing of "-Warray-bounds" warnings for the kvaser_usb driver. The next 2 patches target the m_can driver. The first is by me cleans up the LEC error handling, the second is by Vivek Yadav and extends the LEC error handling to the data phase of CAN-FD frames. The next 9 patches all target the gs_usb driver. The first 5 patches are by me and improve the Kconfig prompt and help text, set netdev->dev_id to distinguish multi CAN channel devices, allow loopback and listen only at the same time, and clean up the gs_can_open() function a bit. The remaining 4 patches are by Jeroen Hofstee and add support for 2 new features: Bus Error Reporting and Get State. Jimmy Assarsson and Anssi Hannula contribute 10 patches for the kvaser_usb driver. They first add Listen Only and Bus Error Reporting support, handle CMD_ERROR_EVENT errors, improve CAN state handling, restart events, and configuration of the bit timing parameters. Another patch by me which fixes the indention in the m_can driver. A patch by Dongliang Mu cleans up the ucan_disconnect() function in the ucan driver. The last patch by Biju Das is for the rcan_canfd driver and cleans up the reset handling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-26net: mac802154: Fixup function parameter name in docsStefan Schmidt1-2/+2
The function parameter name was wrong in kdocs. net/mac802154/util.c:27: warning: Function parameter or member 'hw' not described in 'ieee802154_wake_queue' net/mac802154/util.c:27: warning: Excess function parameter 'local' description in 'ieee802154_wake_queue' net/mac802154/util.c:53: warning: Function parameter or member 'hw' not described in 'ieee802154_stop_queue' net/mac802154/util.c:53: warning: Excess function parameter 'local' description in 'ieee802154_stop_queue' Fixing name and description. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-25ipv6: ensure sane device mtu in tunnelsEric Dumazet3-13/+18
Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25net: dev: Convert sa_data to flexible array in struct sockaddrKees Cook3-7/+7
One of the worst offenders of "fake flexible arrays" is struct sockaddr, as it is the classic example of why GCC and Clang have been traditionally forced to treat all trailing arrays as fake flexible arrays: in the distant misty past, sa_data became too small, and code started just treating it as a flexible array, even though it was fixed-size. The special case by the compiler is specifically that sizeof(sa->sa_data) and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1)) do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat it as a flexible array. However, the coming -fstrict-flex-arrays compiler flag will remove these special cases so that FORTIFY_SOURCE can gain coverage over all the trailing arrays in the kernel that are _not_ supposed to be treated as a flexible array. To deal with this change, convert sa_data to a true flexible array. To keep the structure size the same, move sa_data into a union with a newly introduced sa_data_min with the original size. The result is that FORTIFY_SOURCE can continue to have no idea how large sa_data may actually be, but anything using sizeof(sa->sa_data) must switch to sizeof(sa->sa_data_min). Cc: Jens Axboe <axboe@kernel.dk> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Petr Machata <petrm@nvidia.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25netfilter: nft_inner: set tunnel offset to GRE header offsetPablo Neira Ayuso1-2/+7
Set inner tunnel offset to the GRE header, this is redundant to existing transport header offset, but this normalizes the handling of the tunnel header regardless its location in the layering. GRE version 0 is overloaded with RFCs, the type decorator in the inner expression might also be useful to interpret matching fields from the netlink delinearize path in userspace. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_inner: add geneve supportPablo Neira Ayuso1-0/+17
Geneve tunnel header may contain options, parse geneve header and update offset to point to the link layer header according to the opt_len field. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_meta: add inner match supportPablo Neira Ayuso2-0/+70
Add support for inner meta matching on: - NFT_META_PROTOCOL: to match on the ethertype, this can be used regardless tunnel protocol provides no link layer header, in that case nft_inner sets on the ethertype based on the IP header version field. - NFT_META_L4PROTO: to match on the layer 4 protocol. These meta expression are usually autogenerated as dependencies by userspace nftables. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_inner: add percpu inner contextPablo Neira Ayuso1-4/+22
Add NFT_PKTINFO_INNER_FULL flag to annotate that inner offsets are available. Store nft_inner_tun_ctx object in percpu area to cache existing inner offsets for this skbuff. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_inner: support for inner tunnel header matchingPablo Neira Ayuso5-2/+463
This new expression allows you to match on the inner headers that are encapsulated by any of the existing tunneling protocols. This expression parses the inner packet to set the link, network and transport offsets, so the existing expressions (with a few updates) can be reused to match on the inner headers. The inner expression supports for different tunnel combinations such as: - ethernet frame over IPv4/IPv6 packet, eg. VxLAN. - IPv4/IPv6 packet over IPv4/IPv6 packet, eg. IPIP. - IPv4/IPv6 packet over IPv4/IPv6 + transport header, eg. GRE. - transport header (ESP or SCTP) over transport header (usually UDP) The following fields are used to describe the tunnel protocol: - flags, which describe how to parse the inner headers: NFT_PAYLOAD_CTX_INNER_TUN, the tunnel provides its own header. NFT_PAYLOAD_CTX_INNER_ETHER, the ethernet frame is available as inner header. NFT_PAYLOAD_CTX_INNER_NH, the network header is available as inner header. NFT_PAYLOAD_CTX_INNER_TH, the transport header is available as inner header. For example, VxLAN sets on all of these flags. While GRE only sets on NFT_PAYLOAD_CTX_INNER_NH and NFT_PAYLOAD_CTX_INNER_TH. Then, ESP over UDP only sets on NFT_PAYLOAD_CTX_INNER_TH. The tunnel description is composed of the following attributes: - header size: in case the tunnel comes with its own header, eg. VxLAN. - type: this provides a hint to userspace on how to delinearize the rule. This is useful for VxLAN and Geneve since they run over UDP, since transport does not provide a hint. This is also useful in case hardware offload is ever supported. The type is not currently interpreted by the kernel. - expression: currently only payload supported. Follow up patch adds also inner meta support which is required by autogenerated dependencies. The exthdr expression should be supported too at some point. There is a new inner_ops operation that needs to be set on to allow to use an existing expression from the inner expression. This patch adds a new NFT_PAYLOAD_TUN_HEADER base which allows to match on the tunnel header fields, eg. vxlan vni. The payload expression is embedded into nft_inner private area and this private data area is passed to the payload inner eval function via direct call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_payload: access ipip payload for inner offsetPablo Neira Ayuso1-0/+3
ipip is an special case, transport and inner header offset are set to the same offset to use the upcoming inner expression for matching on inner tunnel headers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_payload: access GRE payload via inner offsetPablo Neira Ayuso1-0/+32
Parse GRE v0 packets to properly set up inner offset, this allow for matching on inner headers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_objref: make it builtinFlorian Westphal4-29/+4
nft_objref is needed to reference named objects, it makes no sense to disable it. Before: text data bss dec filename 4014 424 0 4438 nft_objref.o 4174 1128 0 5302 nft_objref.ko 359351 15276 864 375491 nf_tables.ko After: text data bss dec filename 3815 408 0 4223 nft_objref.o 363161 15692 864 379717 nf_tables.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_payload: move struct nft_payload_set definition where it belongsPablo Neira Ayuso1-0/+10
Not required to expose this header in nf_tables_core.h, move it to where it is used, ie. nft_payload. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25mptcp: sockopt: use new helper for TCP_DEFER_ACCEPTMatthieu Baerts1-13/+3
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as mptcp_setsockopt_first_sf_only() except for the returned code in case of error. Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled when used with "plain" TCP sockets. The specific function for TCP_DEFER_ACCEPT can be replaced by the new mptcp_setsockopt_first_sf_only() helper and errors can be ignored to stay compatible with TCP. A bit of cleanup. Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25mptcp: add TCP_FASTOPEN_NO_COOKIE supportMatthieu Baerts1-2/+5
The goal of this socket option is to configure MPTCP + TFO without cookie per socket. It was already possible to enable TFO without a cookie per netns by setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route was also supported by setting 'fastopen_no_cookie' option. This patch adds a per socket support like it is possible to do with TCP thanks to TCP_FASTOPEN_NO_COOKIE socket option. The only thing to do here is to relay the request to the first subflow like it is already done for TCP_FASTOPEN_CONNECT. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25mptcp: sockopt: make 'tcp_fastopen_connect' genericMatthieu Baerts1-5/+6
There are other socket options that need to act only on the first subflow, e.g. all TCP_FASTOPEN* socket options. This is similar to the getsockopt version. In the next commit, this new mptcp_setsockopt_first_sf_only() helper is used by other another option. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25soreuseport: Fix socket selection for SO_INCOMING_CPU.Kuniyuki Iwashima2-6/+90
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work with setsockopt(SO_REUSEPORT) since v4.6. With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could build a highly efficient server application. setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener or UDP socket, and then incoming packets processed on the CPU will likely be distributed to the socket. Technically, a socket could even receive packets handled on another CPU if no sockets in the reuseport group have the same CPU receiving the flow. The logic exists in compute_score() so that a socket will get a higher score if it has the same CPU with the flow. However, the score gets ignored after the blamed two commits, which introduced a faster socket selection algorithm for SO_REUSEPORT. This patch introduces a counter of sockets with SO_INCOMING_CPU in a reuseport group to check if we should iterate all sockets to find a proper one. We increment the counter when * calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT * enabling SO_INCOMING_CPU if the socket is in a reuseport group Also, we decrement it when * detaching a socket out of the group to apply SO_INCOMING_CPU to migrated TCP requests * disabling SO_INCOMING_CPU if the socket is in a reuseport group When the counter reaches 0, we can get back to the O(1) selection algorithm. The overall changes are negligible for the non-SO_INCOMING_CPU case, and the only notable thing is that we have to update sk_incomnig_cpu under reuseport_lock. Otherwise, the race prevents transitioning to the O(n) algorithm and results in the wrong socket selection. cpu1 (setsockopt) cpu2 (listen) +-----------------+ +-------------+ lock_sock(sk1) lock_sock(sk2) reuseport_update_incoming_cpu(sk1, val) . | /* set CPU as 0 */ |- WRITE_ONCE(sk1->incoming_cpu, val) | | spin_lock_bh(&reuseport_lock) | reuseport_grow(sk2, reuse) | . | |- more_socks_size = reuse->max_socks * 2U; | |- if (more_socks_size > U16_MAX && | | reuse->num_closed_socks) | | . | | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL); | | `- __reuseport_detach_closed_sock(sk1, reuse) | | . | | `- reuseport_put_incoming_cpu(sk1, reuse) | | . | | | /* Read shutdown()ed sk1's sk_incoming_cpu | | | * without lock_sock(). | | | */ | | `- if (sk1->sk_incoming_cpu >= 0) | | . | | | /* decrement not-yet-incremented | | | * count, which is never incremented. | | | */ | | `- __reuseport_put_incoming_cpu(reuse); | | | `- spin_lock_bh(&reuseport_lock) | |- spin_lock_bh(&reuseport_lock) | |- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...) |- if (!reuse) | . | | /* Cannot increment reuse->incoming_cpu. */ | `- goto out; | `- spin_unlock_bh(&reuseport_lock) Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") Reported-by: Kazuho Oku <kazuhooku@gmail.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25act_skbedit: skbedit queue mapping for receive queueAmritha Nambiar2-2/+19
Add support for skbedit queue mapping action on receive side. This is supported only in hardware, so the skip_sw flag is enforced. This enables offloading filters for receive queue selection in the hardware using the skbedit action. Traffic arrives on the Rx queue requested in the skbedit action parameter. A new tc action flag TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the traffic direction the action queue_mapping is requested on during filter addition. This is used to disallow offloading the skbedit queue mapping action on transmit side. Example: $tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\ action skbedit queue_mapping $rxq_id skip_sw Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-24Merge tag 'ieee802154-for-net-2022-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpanJakub Kicinski2-3/+6
Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2022-10-24 Two fixup patches for return code changes of an earlier commit. Wei Yongjun fixed a missed -EINVAL return on the recent change, while Alexander Aring adds handling for unknown address type cases as well. Miquel Raynal fixed a long standing issue with LQI value recording which got broken 8 years ago. (It got more attention with the work in progress enhancement in wpan). * tag 'ieee802154-for-net-2022-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: mac802154: Fix LQI recording net: ieee802154: fix error return code in dgram_bind() net: ieee802154: return -EINVAL for unknown addr type ==================== Link: https://lore.kernel.org/r/20221024102301.9433-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24mptcp: fix abba deadlock on fastopenPaolo Abeni1-15/+34
Our CI reported lockdep splat in the fastopen code: ====================================================== WARNING: possible circular locking dependency detected 6.0.0.mptcp_f5e8bfe9878d+ #1558 Not tainted ------------------------------------------------------ packetdrill/1071 is trying to acquire lock: ffff8881bd198140 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_wait_for_connect+0x19c/0x310 but task is already holding lock: ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (k-sk_lock-AF_INET){+.+.}-{0:0}: __lock_acquire+0xb6d/0x1860 lock_acquire+0x1d8/0x620 lock_sock_nested+0x37/0xd0 inet_stream_connect+0x3f/0xa0 mptcp_connect+0x411/0x800 __inet_stream_connect+0x3ab/0x800 mptcp_stream_connect+0xac/0x110 __sys_connect+0x101/0x130 __x64_sys_connect+0x6e/0xb0 do_syscall_64+0x59/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_INET){+.+.}-{0:0}: check_prev_add+0x15e/0x2110 validate_chain+0xace/0xdf0 __lock_acquire+0xb6d/0x1860 lock_acquire+0x1d8/0x620 lock_sock_nested+0x37/0xd0 inet_wait_for_connect+0x19c/0x310 __inet_stream_connect+0x26c/0x800 tcp_sendmsg_fastopen+0x341/0x650 mptcp_sendmsg+0x109d/0x1740 sock_sendmsg+0xe1/0x120 __sys_sendto+0x1c7/0x2a0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x59/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(k-sk_lock-AF_INET); lock(sk_lock-AF_INET); lock(k-sk_lock-AF_INET); lock(sk_lock-AF_INET); *** DEADLOCK *** 1 lock held by packetdrill/1071: #0: ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740 ====================================================== The problem is caused by the blocking inet_wait_for_connect() releasing and re-acquiring the msk socket lock while the subflow socket lock is still held and the MPTCP socket requires that the msk socket lock must be acquired before the subflow socket lock. Address the issue always invoking tcp_sendmsg_fastopen() in an unblocking manner, and later eventually complete the blocking __inet_stream_connect() as needed. Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24mptcp: factor out mptcp_connect()Paolo Abeni2-67/+73
The current MPTCP connect implementation duplicates a bit of inet code and does not use nor provide a struct proto->connect callback, which in turn will not fit the upcoming fastopen implementation. Refactor such implementation to use the common helper, moving the MPTCP-specific bits into mptcp_connect(). Additionally, avoid an indirect call to the subflow connect callback. Note that the fastopen call-path invokes mptcp_connect() while already holding the subflow socket lock. Explicitly keep track of such path via a new MPTCP-level flag and handle the locking accordingly. Additionally, track the connect flags in a new msk field to allow propagating them to the subflow inet_stream_connect call. Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24mptcp: set msk local address earlierPaolo Abeni3-2/+9
The mptcp_pm_nl_get_local_id() code assumes that the msk local address is available at that point. For passive sockets, we initialize such address at accept() time. Depending on the running configuration and the user-space timing, a passive MPJ subflow can join the msk socket before accept() completes. In such case, the PM assigns a wrong local id to the MPJ subflow and later PM netlink operations will end-up touching the wrong/unexpected subflow. All the above causes sporadic self-tests failures, especially when the host is heavy loaded. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/308 Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24genetlink: piggy back on resv_op to default to a reject policyJakub Kicinski1-0/+23
To keep backward compatibility we used to leave attribute parsing to the family if no policy is specified. This becomes tedious as we move to more strict validation. Families must define reject all policies if they don't want any attributes accepted. Piggy back on the resv_start_op field as the switchover point. AFAICT only ethtool has added new commands since the resv_start_op was defined, and it has per-op policies so this should be a no-op. Nonetheless the patch should still go into v6.1 for consistency. Link: https://lore.kernel.org/all/20221019125745.3f2e7659@kernel.org/ Link: https://lore.kernel.org/r/20221021193532.1511293-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24ethtool: eeprom: fix null-deref on genl_info in dumpXin Long1-1/+1
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-15/+42
include/linux/net.h a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag") e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.