aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-31mac80211: accept aggregation sessions on 6 GHzJohannes Berg2-3/+5
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: require HE capabilities for 6 GHz bandJohannes Berg1-0/+10
On 6 GHz band, HE capabilities must be available for all of the interface types, otherwise we shouldn't use 6 GHz. Check this. Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: reject HT/VHT capabilities on 6 GHz bandJohannes Berg1-1/+6
On the 6 GHz band, HE should be used, but without any direct HT/VHT capabilities, instead the HE 6 GHz band capabilities will capture the relevant information. Reject HT/VHT capabilities here. Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: treat 6 GHz channels as valid regardless of capabilityJohannes Berg1-7/+15
If a 6 GHz channel exists, then we can probably safely assume that the device actually supports it, and then it should support most bandwidths. This will probably need to be extended to check the interface type and then dig into the HE capabilities for that though, to have the correct bandwidth check. Link: https://lore.kernel.org/r/20200528213443.d4864ef52e92.I82f09b2b14a56413ce20376d09967fe954a033eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer3-17/+38
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg5-2/+56
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: check the correct bit for EMA APShaul Triebitz1-9/+9
An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec). So the *3rd* bit of the 10th byte should be checked. Also, in one place, the wrong byte was checked. (cfg80211_find_ie returns a pointer to the beginning of the IE, so the data really starts at ie[2], so the 10th byte should be ie[12]. To avoid this confusion, use cfg80211_find_elem instead). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: determine chandef from HE 6 GHz operationJohannes Berg4-19/+160
Support connecting to HE 6 GHz APs and mesh networks on 6 GHz, where the HT/VHT information is missing but instead the HE 6 GHz band capability is present, and the 6 GHz Operation information field is used to encode the channel configuration instead of the HT/VHT operation elements. Also add some other bits needed to connect to 6 GHz networks. Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: avoid using ext NSS high BW if not supportedJohannes Berg7-17/+100
If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2, but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS BW Support", then we cannot use any MCSes in the the higher bandwidth. Thus, avoid connecting with higher bandwidth since it's less efficient that way. Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: do not allow HT/VHT IEs in 6 GHz mesh modeRajkumar Manoharan1-0/+16
As HT/VHT elements are not allowed in 6 GHz band, do not include them in mesh beacon template formation. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-9-git-send-email-rmanohar@codeaurora.org Link: https://lore.kernel.org/r/20200528193455.76796-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: build HE operation with 6 GHz oper informationRajkumar Manoharan4-8/+72
Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k) while building HE operation element for non-HE AP. This field is used to determine channel information in the absence of HT/VHT IEs. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org [fix skb allocation size] Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capability elementRajkumar Manoharan6-1/+65
Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0, 9.4.2.261) for association request and mesh beacon. The 6 GHz capability information is passed by driver through iftypes caps. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org [handle SMPS, adjust for previous patches, reserve SKB space properly, change to handle SKB directly] Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: add and expose HE 6 GHz band capabilitiesJohannes Berg1-1/+8
These capabilities cover what would otherwise be transported in HT/VHT capabilities, but only a subset thereof that is actually needed on 6 GHz with HE already present. Expose the capabilities to userspace, drivers are expected to set them as using the 6 GHz band (currently) requires HE capability. Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capabilities into parse extensionRajkumar Manoharan2-0/+5
Handle 6 GHz band capability element parsing for association. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org [some renaming to be in line with previous patches] Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: handle 6 GHz capability of new stationRajkumar Manoharan1-1/+17
Handle 6 GHz HE capability while adding new station. It will be used later in mac80211 station processing. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org [handle nl80211_set_station, require WME, remove NL80211_HE_6GHZ_CAPABILITY_LEN] Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31nl80211: really allow client-only BIGTK supportJohannes Berg2-3/+8
My previous commit here was wrong, it didn't check the new flag in two necessary places, so things didn't work. Fix that. Fixes: 155d7c733807 ("nl80211: allow client-only BIGTK support") Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: adapt to new channelization of the 6GHz bandArend Van Spriel1-2/+4
The 6GHz band does not have regulatory approval yet, but things are moving forward. However, that has led to a change in the channelization of the 6GHz band which has been accepted in the 11ax specification. It also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it. This change is primarily thrown in to discuss how to deal with it. I noticed ath11k adding 6G support with old channelization and ditto for iw. It probably involves changes in hostapd as well. Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Cc: Jouni Malinen <jouni@w1.fi> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: fix 6 GHz frequencies to kHzJohannes Berg1-1/+1
The updates to change to kHz frequencies and the 6 GHz additions evidently overlapped (or rather, I didn't see it when applying the latter), so the 6 GHz is broken. Fix this. Fixes: 934f4c7dd3a5 ("cfg80211: express channels with a KHz component") Link: https://lore.kernel.org/r/20200529140425.1bf824f6911b.I4a1174916b8f5965af4366999eb9ffc7a0347470@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-28mac80211: support control port TX status reportingMarkus Theil5-22/+56
Add support for TX status reporting for the control port TX API; this will be used by hostapd when it moves to the control port TX API. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200527160334.19224-1-markus.theil@tu-ilmenau.de [fix commit message, it was referring to nl80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix HT-Control field reception for management framesJohannes Berg1-7/+37
If we receive management frames with an HT-Control field, we cannot parse them properly, as we assume a fixed length management header. Since we don't even need the HTC field (for these frames, or really at all), just remove it at the beginning of RX. Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526143346.cf5ce70521c5.I333251a084ec4cfe67b7ef7efe2d2f1a33883931@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: fix CFG82011_CRDA_SUPPORT still mentioning internal regdbPatrick Steinhardt1-2/+2
Back with commit c8c240e284b3 (cfg80211: reg: remove support for built-in regdb, 2015-10-15), support for using CFG80211_INTERNAL_REGDB was removed in favor of loading the regulatory database as firmware file. The documentation of CFG80211_CRDA_SUPPORT was not adjusted, though, which is why it still mentions mentions the old way of loading via the internal regulatory database. Remove it so that the kernel option only mentions using the firmware file. Signed-off-by: Patrick Steinhardt <ps@pks.im> Link: https://lore.kernel.org/r/c56e60207fbd0512029de8c6276ee00f73491924.1589732954.git.ps@pks.im Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: Add support to configure TID specific Tx rate configurationTamizh Chelvam1-14/+42
This patch adds support to configure per TID Tx Rate configuration through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: allow SA-QUERY processing in userspaceJohannes Berg1-13/+36
As discussed with Mathy almost two years ago in http://lore.kernel.org/r/20180806224857.14853-1-Mathy.Vanhoef@cs.kuleuven.be we should let userspace process SA-QUERY frames if it wants to, so that it can handle OCV (operating channel validation) which mac80211 doesn't know how to. Evidently I had been expecting Mathy to (re)send such a patch, but he never did, perhaps expecting me to do it after our discussion. In any case, this came up now with OCV getting more attention, so move the code around as discussed there to let userspace handle it, and do it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526103131.1f9cf7e5b6db.Iae5b42b09ad2b1cbcbe13492002c43f0d1d51dfc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add ability to report TX status for control port TXMarkus Theil5-13/+60
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185907.GA15102@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: support scan frequencies in KHzThomas Pedersen2-12/+41
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add KHz frequency offset for most wifi commandsThomas Pedersen1-20/+58
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen4-18/+20
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: simplify peer specific TID configurationSergey Matyukevich1-4/+1
Current rule for applying TID configuration for specific peer looks overly complicated. No need to reject new TID configuration when override flag is specified. Another call with the same TID configuration, but without override flag, allows to apply new configuration anyway. Use the same approach as for the 'all peers' case: if override flag is specified, then reset existing TID configuration and immediately apply a new one. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add support for TID specific AMSDU configurationSergey Matyukevich1-0/+8
This patch adds support to control per TID MSDU aggregation using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-4-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix variable names in TID config methodsSergey Matyukevich2-5/+5
Fix all variable names from 'tid' to 'tids' to avoid confusion. Now this is not TID number, but TID mask. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-3-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-26net: ethtool: Allow PHY cable test TDR data to configuredAndrew Lunn1-2/+102
Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: ethtool: Add helpers for cable test TDR dataAndrew Lunn1-1/+79
Add helpers for returning raw TDR helpers in netlink messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: ethtool: Add generic parts of cable test TDRAndrew Lunn3-6/+64
Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mptcp: attempt coalescing when moving skbs to mptcp rx queueFlorian Westphal1-2/+19
We can try to coalesce skbs we take from the subflows rx queue with the tail of the mptcp rx queue. If successful, the skb head can be discarded early. We can also free the skb extensions, we do not access them after this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net/smc: mark smc_pnet_policy as constDmitry Vyukov1-1/+1
Netlink policies are generally declared as const. This is safer and prevents potential bugs. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextDavid S. Miller31-267/+507
Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26cls_flower: Support filtering on multiple MPLS Label Stack EntriesGuillaume Nault1-1/+242
With struct flow_dissector_key_mpls now recording the first FLOW_DIS_MPLS_MAX labels, we can extend Flower to filter on any of these LSEs independently. In order to avoid creating new netlink attributes for every possible depth, let's define a new TCA_FLOWER_KEY_MPLS_OPTS nested attribute that contains the list of LSEs to match. Each LSE is represented by another attribute, TCA_FLOWER_KEY_MPLS_OPTS_LSE, which then contains the attributes representing the depth and the MPLS fields to match at this depth (label, TTL, etc.). For each MPLS field, the mask is always set to all-ones, as this is what the original API did. We could allow user configurable masks in the future if there is demand for more flexibility. The new API also allows to only specify an LSE depth. In that case, Flower only verifies that the MPLS label stack depth is greater or equal to the provided depth (that is, an LSE exists at this depth). Filters that only match on one (or more) fields of the first LSE are dumped using the old netlink attributes, to avoid confusing user space programs that don't understand the new API. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26flow_dissector: Parse multiple MPLS Label Stack EntriesGuillaume Nault2-32/+69
The current MPLS dissector only parses the first MPLS Label Stack Entry (second LSE can be parsed too, but only to set a key_id). This patch adds the possibility to parse several LSEs by making __skb_flow_dissect_mpls() return FLOW_DISSECT_RET_PROTO_AGAIN as long as the Bottom Of Stack bit hasn't been seen, up to a maximum of FLOW_DIS_MPLS_MAX entries. FLOW_DIS_MPLS_MAX is arbitrarily set to 7. This should be enough for many practical purposes, without wasting too much space. To record the parsed values, flow_dissector_key_mpls is modified to store an array of stack entries, instead of just the values of the first one. A bit field, "used_lses", is also added to keep track of the LSEs that have been set. The objective is to avoid defining a new FLOW_DISSECTOR_KEY_MPLS_XX for each level of the MPLS stack. TC flower is adapted for the new struct flow_dissector_key_mpls layout. Matching on several MPLS Label Stack Entries will be added in the next patch. The NFP and MLX5 drivers are also adapted: nfp_flower_compile_mac() and mlx5's parse_tunnel() now verify that the rule only uses the first LSE and fail if it doesn't. Finally, the behaviour of the FLOW_DISSECTOR_KEY_MPLS_ENTROPY key is slightly modified. Instead of recording the first Entropy Label, it now records the last one. This shouldn't have any consequences since there doesn't seem to have any user of FLOW_DISSECTOR_KEY_MPLS_ENTROPY in the tree. We'd probably better do a hash of all parsed MPLS labels instead (excluding reserved labels) anyway. That'd give better entropy and would probably also simplify the code. But that's not the purpose of this patch, so I'm keeping that as a future possible improvement. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'batadv-next-for-davem-20200526' of git://git.open-mesh.org/linux-mergeDavid S. Miller5-20/+8
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - Fix revert dynamic lockdep key changes for batman-adv, by Sven Eckelmann - use rcu_replace_pointer() where appropriate, by Antonio Quartulli - Revert "disable ethtool link speed detection when auto negotiation off", by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tipc: add test for Nagle algorithm effectivenessTuong Lien3-17/+64
When streaming in Nagle mode, we try to bundle small messages from user as many as possible if there is one outstanding buffer, i.e. not ACK-ed by the receiving side, which helps boost up the overall throughput. So, the algorithm's effectiveness really depends on when Nagle ACK comes or what the specific network latency (RTT) is, compared to the user's message sending rate. In a bad case, the user's sending rate is low or the network latency is small, there will not be many bundles, so making a Nagle ACK or waiting for it is not meaningful. For example: a user sends its messages every 100ms and the RTT is 50ms, then for each messages, we require one Nagle ACK but then there is only one user message sent without any bundles. In a better case, even if we have a few bundles (e.g. the RTT = 300ms), but now the user sends messages in medium size, then there will not be any difference at all, that says 3 x 1000-byte data messages if bundled will still result in 3 bundles with MTU = 1500. When Nagle is ineffective, the delay in user message sending is clearly wasted instead of sending directly. Besides, adding Nagle ACKs will consume some processor load on both the sending and receiving sides. This commit adds a test on the effectiveness of the Nagle algorithm for an individual connection in the network on which it actually runs. Particularly, upon receipt of a Nagle ACK we will compare the number of bundles in the backlog queue to the number of user messages which would be sent directly without Nagle. If the ratio is good (e.g. >= 2), Nagle mode will be kept for further message sending. Otherwise, we will leave Nagle and put a 'penalty' on the connection, so it will have to spend more 'one-way' messages before being able to re-enter Nagle. In addition, the 'ack-required' bit is only set when really needed that the number of Nagle ACKs will be reduced during Nagle mode. Testing with benchmark showed that with the patch, there was not much difference in throughput for small messages since the tool continuously sends messages without a break, so Nagle would still take in effect. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tipc: add support for broadcast rcv stats dumpingTuong Lien9-56/+101
This commit enables dumping the statistics of a broadcast-receiver link like the traditional 'broadcast-link' one (which is for broadcast- sender). The link dumping can be triggered via netlink (e.g. the iproute2/tipc tool) by the link flag - 'TIPC_NLA_LINK_BROADCAST' as the indicator. The name of a broadcast-receiver link of a specific peer will be in the format: 'broadcast-link:<peer-id>'. For example: Link <broadcast-link:1001002> Window:50 packets RX packets:7841 fragments:2408/440 bundles:0/0 TX packets:0 fragments:0/0 bundles:0/0 RX naks:0 defs:124 dups:0 TX naks:21 acks:0 retrans:0 Congestion link:0 Send queue max:0 avg:0 In addition, the broadcast-receiver link statistics can be reset in the usual way via netlink by specifying that link name in command. Note: the 'tipc_link_name_ext()' is removed because the link name can now be retrieved simply via the 'l->name'. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tipc: enable broadcast retrans via unicastTuong Lien6-11/+28
In some environment, broadcast traffic is suppressed at high rate (i.e. a kind of bandwidth limit setting). When it is applied, TIPC broadcast can still run successfully. However, when it comes to a high load, some packets will be dropped first and TIPC tries to retransmit them but the packet retransmission is intentionally broadcast too, so making things worse and not helpful at all. This commit enables the broadcast retransmission via unicast which only retransmits packets to the specific peer that has really reported a gap i.e. not broadcasting to all nodes in the cluster, so will prevent from being suppressed, and also reduce some overheads on the other peers due to duplicates, finally improve the overall TIPC broadcast performance. Note: the functionality can be turned on/off via the sysctl file: echo 1 > /proc/sys/net/tipc/bc_retruni echo 0 > /proc/sys/net/tipc/bc_retruni Default is '0', i.e. the broadcast retransmission still works as usual. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tipc: add back link trace eventsTuong Lien2-5/+11
In the previous commit ("tipc: add Gap ACK blocks support for broadcast link"), we have removed the following link trace events due to the code changes: - tipc_link_bc_ack - tipc_link_retrans This commit adds them back along with some minor changes to adapt to the new code. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tipc: introduce Gap ACK blocks for broadcast linkTuong Lien5-185/+293
As achieved through commit 9195948fbf34 ("tipc: improve TIPC throughput by Gap ACK blocks"), we apply the same mechanism for the broadcast link as well. The 'Gap ACK blocks' data field in a 'PROTOCOL/STATE_MSG' will consist of two parts built for both the broadcast and unicast types: 31 16 15 0 +-------------+-------------+-------------+-------------+ | bgack_cnt | ugack_cnt | len | +-------------+-------------+-------------+-------------+ - | gap | ack | | +-------------+-------------+-------------+-------------+ > bc gacks : : : | +-------------+-------------+-------------+-------------+ - | gap | ack | | +-------------+-------------+-------------+-------------+ > uc gacks : : : | +-------------+-------------+-------------+-------------+ - which is "automatically" backward-compatible. We also increase the max number of Gap ACK blocks to 128, allowing upto 64 blocks per type (total buffer size = 516 bytes). Besides, the 'tipc_link_advance_transmq()' function is refactored which is applicable for both the unicast and broadcast cases now, so some old functions can be removed and the code is optimized. With the patch, TIPC broadcast is more robust regardless of packet loss or disorder, latency, ... in the underlying network. Its performance is boost up significantly. For example, experiment with a 5% packet loss rate results: $ time tipc-pipe --mc --rdm --data_size 123 --data_num 1500000 real 0m 42.46s user 0m 1.16s sys 0m 17.67s Without the patch: $ time tipc-pipe --mc --rdm --data_size 123 --data_num 1500000 real 8m 27.94s user 0m 0.55s sys 0m 2.38s Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26tcp: tcp_v4_err() icmp skb is named icmp_skbEric Dumazet1-1/+1
I missed the fact that tcp_v4_err() differs from tcp_v6_err(). After commit 4d1a2d9ec1c1 ("Rename skb to icmp_skb in tcp_v4_err()") the skb argument has been renamed to icmp_skb only in one function. I will in a future patch reconciliate these functions to avoid this kind of confusion. Fixes: 45af29ca761c ("tcp: allow traceroute -Mtcp for unpriv users") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"Sven Eckelmann1-14/+1
The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection when auto negotiation off") disabled the usage of ethtool's link_ksetting when auto negotation was enabled due to invalid values when used with tun/tap virtual net_devices. According to the patch, automatic measurements should be used for these kind of interfaces. But there are major flaws with this argumentation: * automatic measurements are not implemented * auto negotiation has nothing to do with the validity of the retrieved values The first point has to be fixed by a longer patch series. The "validity" part of the second point must be addressed in the same patch series by dropping the usage of ethtool's link_ksetting (thus always doing automatic measurements over ethernet). Drop the patch again to have more default values for various net_device types/configurations. The user can still overwrite them using the batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-05-25bridge: mrp: Fix out-of-bounds read in br_mrp_parseHoratiu Vultur1-0/+6
The issue was reported by syzbot. When the function br_mrp_parse was called with a valid net_bridge_port, the net_bridge was an invalid pointer. Therefore the check br->stp_enabled could pass/fail depending where it was pointing in memory. The fix consists of setting the net_bridge pointer if the port is a valid pointer. Reported-by: syzbot+9c6f0f1f8e32223df9a4@syzkaller.appspotmail.com Fixes: 6536993371fa ("bridge: mrp: Integrate MRP into the bridge") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25tcp: allow traceroute -Mtcp for unpriv usersEric Dumazet2-0/+4
Unpriv users can use traceroute over plain UDP sockets, but not TCP ones. $ traceroute -Mtcp 8.8.8.8 You do not have enough privileges to use this traceroute method. $ traceroute -n -Mudp 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.86.1 3.631 ms 3.512 ms 3.405 ms 2 10.1.10.1 4.183 ms 4.125 ms 4.072 ms 3 96.120.88.125 20.621 ms 19.462 ms 20.553 ms 4 96.110.177.65 24.271 ms 25.351 ms 25.250 ms 5 69.139.199.197 44.492 ms 43.075 ms 44.346 ms 6 68.86.143.93 27.969 ms 25.184 ms 25.092 ms 7 96.112.146.18 25.323 ms 96.112.146.22 25.583 ms 96.112.146.26 24.502 ms 8 72.14.239.204 24.405 ms 74.125.37.224 16.326 ms 17.194 ms 9 209.85.251.9 18.154 ms 209.85.247.55 14.449 ms 209.85.251.9 26.296 ms^C We can easily support traceroute over TCP, by queueing an error message into socket error queue. Note that applications need to set IP_RECVERR/IPV6_RECVERR option to enable this feature, and that the error message is only queued while in SYN_SNT state. socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_IPV6, IPV6_RECVERR, [1], 4) = 0 setsockopt(3, SOL_SOCKET, SO_TIMESTAMP_OLD, [1], 4) = 0 setsockopt(3, SOL_IPV6, IPV6_UNICAST_HOPS, [5], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, 28) = -1 EHOSTUNREACH (No route to host) recvmsg(3, {msg_name={sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, msg_namelen=1024->28, msg_iov=[{iov_base="`\r\337\320\0004\6\1&\7\370\260\200\231\16\27\0\0\0\0\0\0\0\0 \2\n\5f\10\2\227"..., iov_len=1024}], msg_iovlen=1, msg_control=[{cmsg_len=32, cmsg_level=SOL_SOCKET, cmsg_type=SO_TIMESTAMP_OLD, cmsg_data={tv_sec=1590340680, tv_usec=272424}}, {cmsg_len=60, cmsg_level=SOL_IPV6, cmsg_type=IPV6_RECVERR}], msg_controllen=96, msg_flags=MSG_ERRQUEUE}, MSG_ERRQUEUE) = 144 Suggested-by: Maciej Żenczykowski <maze@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.