aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24ethtool: fix incorrect tx-checksumming settings reportingVladyslav Tarasiuk1-1/+1
Currently, ethtool feature mask for checksum command is ORed with NETIF_F_FCOE_CRC_BIT, which is bit's position number, instead of the actual feature bit - NETIF_F_FCOE_CRC. The invalid bitmask here might affect unrelated features when toggling TX checksumming. For example, TX checksumming is always mistakenly reported as enabled on the netdevs tested (mlx5, virtio_net). Fixes: f70bb06563ed ("ethtool: update mapping of features to legacy ioctl requests") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23Remove DST_HOSTDavid Laight4-18/+8
Previous changes to the IP routing code have removed all the tests for the DS_HOST route flag. Remove the flags and all the code that sets it. Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: dsa: Implement flow dissection for tag_brcm.cFlorian Fainelli1-0/+23
Provide a flow_dissect callback which returns the network offset and where to find the skb protocol, given the tags structure a common function works for both tagging formats that are supported. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23devlink: Only pass packet trap group identifier in trap structureIdo Schimmel1-4/+17
Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23devlink: Stop reference counting packet trap groupsIdo Schimmel1-96/+5
Now that drivers explicitly register their supported packet trap groups there is no for devlink to create them on-demand and destroy them when their reference count reaches zero. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23devlink: Add API to register packet trap groupsIdo Schimmel1-0/+117
Currently, packet trap groups are implicitly registered by drivers upon packet trap registration. When the traps are registered, each is associated with a group and the group is created by devlink, if it does not exist already. This makes it difficult for drivers to pass additional attributes for the groups. Therefore, as a preparation for future patches that require passing additional group attributes, add an API to explicitly register / unregister these groups. Next patches will convert existing drivers to use this API. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: sched: rename more stats_typesJakub Kicinski2-25/+23
Commit 53eca1f3479f ("net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*") renamed just the flow action types and helpers. For consistency rename variables, enums, struct members and UAPI too (note that this UAPI was not in any official release, yet). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: mptcp: don't hang in mptcp_sendmsg() after TCP fallbackDavide Caratti2-4/+6
it's still possible for packetdrill to hang in mptcp_sendmsg(), when the MPTCP socket falls back to regular TCP (e.g. after receiving unsupported flags/version during the three-way handshake). Adjust MPTCP socket state earlier, to ensure correct functionality of mptcp_sendmsg() even in case of TCP fallback. Fixes: 767d3ded5fb8 ("net: mptcp: don't hang before sending 'MP capable with data'") Fixes: 1954b86016cf ("mptcp: Check connection state before attempting send") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: Make skb_segment not to compute checksum if network controller supports checksummingYadu Kishore1-8/+15
Problem: TCP checksum in the output path is not being offloaded during GSO in the following case: The network driver does not support scatter-gather but supports checksum offload with NETIF_F_HW_CSUM. Cause: skb_segment calls skb_copy_and_csum_bits if the network driver does not announce NETIF_F_SG. It does not check if the driver supports NETIF_F_HW_CSUM. So for devices which might want to offload checksum but do not support SG there is currently no way to do so if GSO is enabled. Solution: In skb_segment check if the network controller does checksum and if so call skb_copy_bits instead of skb_copy_and_csum_bits. Testing: Without the patch, ran iperf TCP traffic with NETIF_F_HW_CSUM enabled in the network driver. Observed the TCP checksum offload is not happening since the skbs received by the driver in the output path have skb->ip_summed set to CHECKSUM_NONE. With the patch ran iperf TCP traffic and observed that TCP checksum is being offloaded with skb->ip_summed set to CHECKSUM_PARTIAL. Also tested with the patch by disabling NETIF_F_HW_CSUM in the driver to cover the newly introduced if-else code path in skb_segment. Link: https://lore.kernel.org/netdev/CA+FuTSeYGYr3Umij+Mezk9CUcaxYwqEe5sPSuXF8jPE2yMFJAw@mail.gmail.com Signed-off-by: Yadu Kishore <kyk.segfault@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21mptcp: Remove set but not used variable 'can_ack'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: net/mptcp/options.c: In function 'mptcp_established_options_dss': net/mptcp/options.c:338:7: warning: variable 'can_ack' set but not used [-Wunused-but-set-variable] commit dc093db5cc05 ("mptcp: drop unneeded checks") leave behind this unused, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCEJakub Sitnicki2-5/+6
sockmap performs lockless writes to sk->sk_prot on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate other sites that access sk_prot with READ_ONCE/WRITE_ONCE macros. Change done with Coccinelle with following semantic patch: @@ expression E; identifier I; struct sock *sk; identifier sk_prot =~ "^sk_prot$"; @@ ( E = -sk->sk_prot +READ_ONCE(sk->sk_prot) | -sk->sk_prot = E +WRITE_ONCE(sk->sk_prot, E) | -sk->sk_prot +READ_ONCE(sk->sk_prot) ->I ) Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Read sk_prot once when building tls proto opsJakub Sitnicki1-8/+9
Apart from being a "tremendous" win when it comes to generated machine code (see bloat-o-meter output for x86-64 below) this mainly prepares ground for annotating access to sk_prot with READ_ONCE, so that we don't pepper the code with access annotations and needlessly repeat loads. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46) Function old new delta tls_init 851 805 -46 Total: Before=21063, After=21017, chg -0.22% Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Constify base proto ops used for building tls protoJakub Sitnicki1-2/+2
The helper that builds kTLS proto ops doesn't need to and should not modify the base proto ops. Annotate the parameter as read-only. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20Merge tag 'mac80211-next-for-net-next-2020-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextDavid S. Miller12-18/+147
Johannes Berg says: ==================== Another set of changes: * HE ranging (fine timing measurement) API support * hwsim gets virtio support, for use with wmediumd, to be able to simulate with multiple machines * eapol-over-nl80211 improvements to exclude preauth * IBSS reset support, to recover connections from userspace * and various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20net: bridge: vlan options: move the tunnel command to the nested attributeNikolay Aleksandrov1-17/+30
Now that we have a nested tunnel info attribute we can add a separate one for the tunnel command and require it explicitly from user-space. It must be one of RTM_SETLINK/DELLINK. Only RTM_SETLINK requires a valid tunnel id, DELLINK just removes it if it was set before. This allows us to have all tunnel attributes and control in one place, thus removing the need for an outside vlan info flag. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20net: bridge: vlan options: nest the tunnel id into a tunnel info attributeNikolay Aleksandrov2-7/+32
While discussing the new API, Roopa mentioned that we'll be adding more tunnel attributes and options in the future, so it's better to make it a nested attribute, since this is still in net-next we can easily change it and nest the tunnel id attribute under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. The new format is: [BRIDGE_VLANDB_ENTRY] [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] [BRIDGE_VLANDB_TINFO_ID] Any new tunnel attributes can be nested under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20mac80211: driver can remain on channel if not using chan_ctxYan-Hsuan Chuang1-1/+1
Some of the drivers are not using channel context, but let the stack to control/switch channels instead. For such cases, driver can still remain on channel because the mac80211 stack actually supports it. The stack will check if the driver is using chan_ctx and has ops->remain_on_channel been hooked. Otherwise it will start its ROC work to remain on channel. So, even if the driver is not using chan_ctx, the driver is still capable of doing remain on channel. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Link: https://lore.kernel.org/r/20200312074337.16198-1-yhchuang@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: clarify code in nl80211_del_station()Johannes Berg1-8/+14
The long if chain of interface types is hard to read, especially now with the additional condition after it. Use a switch statement to clarify this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200320113834.2c51b9e8e341.I3fa5dc3f7d3cb1dbbd77191d764586f7da993f3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20cfg80211: Configure PMK lifetime and reauth threshold for PMKSA entriesVeerendranath Jakkam1-0/+11
Drivers that trigger roaming need to know the lifetime of the configured PMKSA for deciding whether to trigger the full or PMKSA cache based authentication. The configured PMKSA is invalid after the PMK lifetime has expired and must not be used after that and the STA needs to disassociate if the PMK expires. Hence the STA is expected to refresh the PMK with a full authentication before this happens (e.g., when reassociating to a new BSS the next time or by performing EAPOL reauthentication depending on the AKM) to avoid unnecessary disconnection. The PMK reauthentication threshold is the percentage of the PMK lifetime value and indicates to the driver to trigger a full authentication roam (without PMKSA caching) after the reauthentication threshold time, but before the PMK timer has expired. Authentication methods like SAE need to be able to generate a new PMKSA entry without having to force a disconnection after this threshold timeout. If no roaming occurs between the reauthentication threshold time and PMK lifetime expiration, disassociation is still forced. The new attributes for providing these values correspond to the dot11 MIB variables dot11RSNAConfigPMKLifetime and dot11RSNAConfigPMKReauthThreshold. This type of functionality is already available in cases where user space component is in control of roaming. This commit extends that same capability into cases where parts or all of this functionality is offloaded to the driver. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200312235903.18462-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: Read rx_stats with perCPU pointersSeevalamuthu Mariappan1-6/+29
Use perCPU pointers to get rx_stats in sta_set_sinfo when RSS is enabled Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1584526555-25960-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: Allow deleting stations in ibss mode to reset their stateNicolas Cavallari1-0/+4
Set the NL80211_EXT_FEATURE_DEL_IBSS_STA if the interface support IBSS mode, so that stations can be reset from user space. mac80211 already deletes stations by itself, so mac80211 drivers must already support this. This has been successfully tested with ath9k. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305135754.12094-2-cavallar@lri.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20cfg80211: Add support for userspace to reset stations in IBSS modeNicolas Cavallari1-1/+6
Sometimes, userspace is able to detect that a peer silently lost its state (like, if the peer reboots). wpa_supplicant does this for IBSS-RSN by registering for auth/deauth frames, but when it detects this, it is only able to remove the encryption keys of the peer and close its port. However, the kernel also hold other state about the station, such as BA sessions, probe response parameters and the like. They also need to be resetted correctly. This patch adds the NL80211_EXT_FEATURE_DEL_IBSS_STA feature flag indicating the driver accepts deleting stations in IBSS mode, which should send a deauth and reset the state of the station, just like in mesh point mode. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305135754.12094-1-cavallar@lri.fr [preserve -EINVAL return] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: consider WLAN_EID_EXT_HE_OPERATION for parsing CRCJohannes Berg1-1/+5
We use the parsing CRC for checking if the beacon changed, and if the WLAN_EID_EXT_HE_OPERATION extended element changes we need to track it so we can react to that. Include it in the CRC calculation. Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: HE: set missing bss_conf fields in AP modeShaul Triebitz1-3/+9
In AP mode, set htc_trig_based_pkt_ext and frame_time_rts_th for driver use. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-19-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: pass HE operation element to the driverShaul Triebitz1-1/+4
Pass the AP's HE operation element to the driver. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-18-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211/cfg80211: add support for non EDCA based ranging measurementAvraham Stern3-0/+46
Add support for requesting that the ranging measurement will use the trigger-based / non trigger-based flow instead of the EDCA based flow. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: don't leave skb->next/prev pointing to stackJohannes Berg1-1/+5
In beacon protection, don't leave skb->next/prev pointing to the on-stack list, even if that's actually harmless since we don't use them again afterwards. While at it, check that the SKB on the list is still the same, as that's required here. If not, the encryption (protection) code is buggy. Fixes: 0a3a84360b37 ("mac80211: Beacon protection using the new BIGTK (AP)") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200320102021.1be7823fc05e.Ia89fb79a0469d32137c9a04315a1d2dfc7b7d6f5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: handle no-preauth flag for control portMarkus Theil7-1/+17
This patch adds support for disabling pre-auth rx over the nl80211 control port for mac80211. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200312091055.54257-3-markus.theil@tu-ilmenau.de [fix indentation slightly, squash feature enablement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: add no pre-auth attribute and ext. feature flag for ctrl. portMarkus Theil1-0/+1
If the nl80211 control port is used before this patch, pre-auth frames (0x88c7) are send to userspace uncoditionally. While this enables userspace to only use nl80211 on the station side, it is not always useful for APs. Furthermore, pre-auth frames are ordinary data frames and not related to the control port. Therefore it should for example be possible for pre-auth frames to be bridged onto a wired network on AP side without touching userspace. For backwards compatibility to code already using pre-auth over nl80211, this patch adds a feature flag to disable this behavior, while it remains enabled by default. An additional ext. feature flag is added to detect this from userspace. Thanks to Jouni for pointing out, that pre-auth frames should be handled as ordinary data frames. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200312091055.54257-2-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-19Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextDavid S. Miller15-166/+1433
Johan Hedberg says: ==================== pull request: bluetooth-next 2020-03-19 Here's the main bluetooth-next pull request for the 5.7 kernel. - Added wideband speech support to mgmt and the ability for HCI drivers to declare support for it. - Added initial support for L2CAP Enhanced Credit Based Mode - Fixed suspend handling for several use cases - Fixed Extended Advertising related issues - Added support for Realtek 8822CE device - Added DT bindings for QTI chip WCN3991 - Cleanups to replace zero-length arrays with flexible-array members - Several other smaller cleanups & fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Make the skbedit priority offloadablePetr Machata1-0/+3
The skbedit action "priority" is used for adjusting SKB priority. Allow drivers to offload the action by introducing two new skbedit getters and a new flow action, and initializing appropriately in tc_setup_flow_action(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: bridge: vlan: include stats in dumps if requestedNikolay Aleksandrov1-12/+61
This patch adds support for vlan stats to be included when dumping vlan information. We have to dump them only when explicitly requested (thus the flag below) because that disables the vlan range compression and will make the dump significantly larger. In order to request the stats to be included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which can affect dumps with the following first flag: - BRIDGE_VLANDB_DUMPF_STATS The stats are intentionally nested and put into separate attributes to make it easier for extending later since we plan to add per-vlan mcast stats, drop stats and possibly STP stats. This is the last missing piece from the new vlan API which makes the dumped vlan information complete. A dump request which should include stats looks like: [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS A vlandb entry attribute with stats looks like: [BRIDGE_VLANDB_ENTRY] = { [BRIDGE_VLANDB_ENTRY_STATS] = { [BRIDGE_VLANDB_STATS_RX_BYTES] [BRIDGE_VLANDB_STATS_RX_PACKETS] ... } } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mptcp: rename fourth ack fieldPaolo Abeni3-11/+11
The name is misleading, it actually tracks the 'fully established' status. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: sched: Fix hw_stats_type setting in pedit loopPetr Machata1-1/+1
In the commit referenced below, hw_stats_type of an entry is set for every entry that corresponds to a pedit action. However, the assignment is only done after the entry pointer is bumped, and therefore could overwrite memory outside of the entries array. The reason for this positioning may have been that the current entry's hw_stats_type is already set above, before the action-type dispatch. However, if there are no more actions, the assignment is wrong. And if there are, the next round of the for_each_action loop will make the assignment before the action-type dispatch anyway. Therefore fix this issue by simply reordering the two lines. Fixes: 74522e7baae2 ("net: sched: set the hw_stats_type in pedit loop") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18netfilter: revert introduction of egress hookDaniel Borkmann4-53/+10
This reverts the following commits: 8537f78647c0 ("netfilter: Introduce egress hook") 5418d3881e1f ("netfilter: Generalize ingress hook") b030f194aed2 ("netfilter: Rename ingress hook include file") >From the discussion in [0], the author's main motivation to add a hook in fast path is for an out of tree kernel module, which is a red flag to begin with. Other mentioned potential use cases like NAT{64,46} is on future extensions w/o concrete code in the tree yet. Revert as suggested [1] given the weak justification to add more hooks to critical fast-path. [0] https://lore.kernel.org/netdev/cover.1583927267.git.lukas@wunner.de/ [1] https://lore.kernel.org/netdev/20200318.011152.72770718915606186.davem@davemloft.net/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Miller <davem@davemloft.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Alexei Starovoitov <ast@kernel.org> Nacked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Bluetooth: Do not cancel advertising when starting a scanDmitry Grinberg1-17/+0
BlueZ cancels adv when starting a scan, but does not cancel a scan when starting to adv. Neither is required, so this brings both to a consistent state (of not affecting each other). Some very rare (I've never seen one) BT 4.0 chips will fail to do both at once. Even this is ok since the command that will fail will be the second one, and thus the common sense logic of first-come-first-served is preserved for BLE requests. Signed-off-by: Dmitry Grinberg <dmitrygr@google.com> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller34-489/+2609
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey. 2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi. Follow up patch to clean up this new mode, from Dan Carpenter. 3) Add support for geneve tunnel options, from Xin Long. 4) Make sets built-in and remove modular infrastructure for sets, from Florian Westphal. 5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing. 6) Statify nft_pipapo_get, from Chen Wandun. 7) Use C99 flexible-array member, from Gustavo A. R. Silva. 8) More descriptive variable names for bitwise, from Jeremy Sowden. 9) Four patches to add tunnel device hardware offload to the flowtable infrastructure, from wenxu. 10) pipapo set supports for 8-bit grouping, from Stefano Brivio. 11) pipapo can switch between nibble and byte grouping, also from Stefano. 12) Add AVX2 vectorized version of pipapo, from Stefano Brivio. 13) Update pipapo to be use it for single ranges, from Stefano. 14) Add stateful expression support to elements via control plane, eg. counter per element. 15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal. 15) Add new egress hook, from Lukas Wunner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17mptcp: move msk state update to subflow_syn_recv_sock()Paolo Abeni2-6/+5
After commit 58b09919626b ("mptcp: create msk early"), the msk socket is already available at subflow_syn_recv_sock() time. Let's move there the state update, to mirror more closely the first subflow state. The above will also help multiple subflow supports. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel mapping set/delNikolay Aleksandrov4-2/+44
This patch adds support for manipulating vlan/tunnel mappings. The tunnel ids are globally unique and are one per-vlan. There were two trickier issues - first in order to support vlan ranges we have to compute the current tunnel id in the following way: - base tunnel id (attr) + current vlan id - starting vlan id This is in line how the old API does vlan/tunnel mapping with ranges. We already have the vlan range present, so it's redundant to add another attribute for the tunnel range end. It's simply base tunnel id + vlan range. And second to support removing mappings we need an out-of-band way to tell the option manipulating function because there are no special/reserved tunnel id values, so we use a vlan flag to denote the operation is tunnel mapping removal. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel id dumpingNikolay Aleksandrov3-5/+30
Add a new option - BRIDGE_VLANDB_ENTRY_TUNNEL_ID which is used to dump the tunnel id mapping. Since they're unique per vlan they can enter a vlan range if they're consecutive, thus we can calculate the tunnel id range map simply as: vlan range end id - vlan range start id. The starting point is the tunnel id in BRIDGE_VLANDB_ENTRY_TUNNEL_ID. This is similar to how the tunnel entries can be created in a range via the old API (a vlan range maps to a tunnel range). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan tunnel: constify bridge and port argumentsNikolay Aleksandrov3-11/+13
The vlan tunnel code changes vlan options, it shouldn't touch port or bridge options so we can constify the port argument. This would later help us to re-use these functions from the vlan options code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: rename br_vlan_opts_eq to br_vlan_opts_eq_rangeNikolay Aleksandrov3-7/+7
It is more appropriate name as it shows the intent of why we need to check the options' state. It also allows us to give meaning to the two arguments of the function: the first is the current vlan (v_curr) being checked if it could enter the range ending in the second one (range_end). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: sch_fq: enable use of hrtimer slackEric Dumazet1-4/+17
Add a new attribute to control the fq qdisc hrtimer slack. Default is set to 10 usec. When/if packets are throttled, fq set up an hrtimer that can lead to one interrupt per packet in the throttled queue. By using a timer slack, we allow better use of timer interrupts, by giving them a chance to call multiple timer callbacks at each hardware interrupt. Also, giving a slack allows FQ to dequeue batches of packets instead of a single one, thus increasing xmit_more efficiency. This has no negative effect on the rate a TCP flow can sustain, since each TCP flow maintains its own precise vtime (tp->tcp_wstamp_ns) v2: added strict netlink checking (as feedback from Jakub Kicinski) Tested: 1000 concurrent flows all using paced packets. 1,000,000 packets sent per second. Before the patch : $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 60726784 23628 3485992 0 0 138 1 977 535 0 12 87 0 0 0 0 0 60714700 23628 3485628 0 0 0 0 1568827 26462 0 22 78 0 0 1 0 0 60716012 23628 3485656 0 0 0 0 1570034 26216 0 22 78 0 0 0 0 0 60722420 23628 3485492 0 0 0 0 1567230 26424 0 22 78 0 0 0 0 0 60727484 23628 3485556 0 0 0 0 1568220 26200 0 22 78 0 0 2 0 0 60718900 23628 3485380 0 0 0 40 1564721 26630 0 22 78 0 0 2 0 0 60718096 23628 3485332 0 0 0 0 1562593 26432 0 22 78 0 0 0 0 0 60719608 23628 3485064 0 0 0 0 1563806 26238 0 22 78 0 0 1 0 0 60722876 23628 3485236 0 0 0 130 1565874 26566 0 22 78 0 0 1 0 0 60722752 23628 3484908 0 0 0 0 1567646 26247 0 22 78 0 0 After the patch, slack of 10 usec, we can see a reduction of interrupts per second, and a small decrease of reported cpu usage. $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 60722564 23628 3484728 0 0 133 1 696 545 0 13 87 0 0 1 0 0 60722568 23628 3484824 0 0 0 0 977278 25469 0 20 80 0 0 0 0 0 60716396 23628 3484764 0 0 0 0 979997 25326 0 20 80 0 0 0 0 0 60713844 23628 3484960 0 0 0 0 981394 25249 0 20 80 0 0 2 0 0 60720468 23628 3484916 0 0 0 0 982860 25062 0 20 80 0 0 1 0 0 60721236 23628 3484856 0 0 0 0 982867 25100 0 20 80 0 0 1 0 0 60722400 23628 3484456 0 0 0 8 982698 25303 0 20 80 0 0 0 0 0 60715396 23628 3484428 0 0 0 0 981777 25176 0 20 80 0 0 0 0 0 60716520 23628 3486544 0 0 0 36 978965 27857 0 21 79 0 0 0 0 0 60719592 23628 3486516 0 0 0 22 977318 25106 0 20 80 0 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: do not reprogram a timer about to expireEric Dumazet1-2/+7
qdisc_watchdog_schedule_range_ns() can use the newly added slack and avoid rearming the hrtimer a bit earlier than the current value. This patch has no effect if delta_ns parameter is zero. Note that this means the max slack is potentially doubled. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: add qdisc_watchdog_schedule_range_ns()Eric Dumazet1-5/+7
Some packet schedulers might want to add a slack when programming hrtimers. This can reduce number of interrupts and increase batch sizes and thus give good xmit_more savings. This commit adds qdisc_watchdog_schedule_range_ns() helper, with an extra delta_ns parameter. Legacy qdisc_watchdog_schedule_n() becomes an inline passing a zero slack. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*Jakub Kicinski2-5/+5
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: ethtool: require drivers to set supported_coalesce_paramsJakub Kicinski3-3/+15
Now that all in-tree drivers have been updated we can make the supported_coalesce_params mandatory. To save debugging time in case some driver was missed (or is out of tree) add a warning when netdev is registered with set_coalesce but without supported_coalesce_params. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18netfilter: Introduce egress hookLukas Wunner4-8/+51
Commit e687ad60af09 ("netfilter: add netfilter ingress hook after handle_ing() under unique static key") introduced the ability to classify packets on ingress. Allow the same on egress. Position the hook immediately before a packet is handed to tc and then sent out on an interface, thereby mirroring the ingress order. This order allows marking packets in the netfilter egress hook and subsequently using the mark in tc. Another benefit of this order is consistency with a lot of existing documentation which says that egress tc is performed after netfilter hooks. Egress hooks already exist for the most common protocols, such as NF_INET_LOCAL_OUT or NF_ARP_OUT, and those are to be preferred because they are executed earlier during packet processing. However for more exotic protocols, there is currently no provision to apply netfilter on egress. A common workaround is to enslave the interface to a bridge and use ebtables, or to resort to tc. But when the ingress hook was introduced, consensus was that users should be given the choice to use netfilter or tc, whichever tool suits their needs best: https://lore.kernel.org/netdev/20150430153317.GA3230@salvia/ This hook is also useful for NAT46/NAT64, tunneling and filtering of locally generated af_packet traffic such as dhclient. There have also been occasional user requests for a netfilter egress hook in the past, e.g.: https://www.spinics.net/lists/netfilter/msg50038.html Performance measurements with pktgen surprisingly show a speedup rather than a slowdown with this commit: * Without this commit: Result: OK: 34240933(c34238375+d2558) usec, 100000000 (60byte,0frags) 2920481pps 1401Mb/sec (1401830880bps) errors: 0 * With this commit: Result: OK: 33997299(c33994193+d3106) usec, 100000000 (60byte,0frags) 2941410pps 1411Mb/sec (1411876800bps) errors: 0 * Without this commit + tc egress: Result: OK: 39022386(c39019547+d2839) usec, 100000000 (60byte,0frags) 2562631pps 1230Mb/sec (1230062880bps) errors: 0 * With this commit + tc egress: Result: OK: 37604447(c37601877+d2570) usec, 100000000 (60byte,0frags) 2659259pps 1276Mb/sec (1276444320bps) errors: 0 * With this commit + nft egress: Result: OK: 41436689(c41434088+d2600) usec, 100000000 (60byte,0frags) 2413320pps 1158Mb/sec (1158393600bps) errors: 0 Tested on a bare-metal Core i7-3615QM, each measurement was performed three times to verify that the numbers are stable. Commands to perform a measurement: modprobe pktgen echo "add_device lo@3" > /proc/net/pktgen/kpktgend_3 samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh -i 'lo@3' -n 100000000 Commands for testing tc egress: tc qdisc add dev lo clsact tc filter add dev lo egress protocol ip prio 1 u32 match ip dst 4.3.2.1/32 Commands for testing nft egress: nft add table netdev t nft add chain netdev t co \{ type filter hook egress device lo priority 0 \; \} nft add rule netdev t co ip daddr 4.3.2.1/32 drop All testing was performed on the loopback interface to avoid distorting measurements by the packet handling in the low-level Ethernet driver. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-18netfilter: Generalize ingress hookLukas Wunner1-1/+1
Prepare for addition of a netfilter egress hook by generalizing the ingress hook introduced by commit e687ad60af09 ("netfilter: add netfilter ingress hook after handle_ing() under unique static key"). In particular, rename and refactor the ingress hook's static inlines such that they can be reused for an egress hook. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-18netfilter: Rename ingress hook include fileLukas Wunner1-1/+1
Prepare for addition of a netfilter egress hook by renaming <linux/netfilter_ingress.h> to <linux/netfilter_netdev.h>. The egress hook also necessitates a refactoring of the include file, but that is done in a separate commit to ease reviewing. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.