aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/samples/bpf/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-19samples, bpf: Refactor tail call user progs with libbpfDaniel T. Lee1-2/+2
BPF tail call uses the BPF_MAP_TYPE_PROG_ARRAY type map for calling into other BPF programs and this PROG_ARRAY should be filled prior to use. Currently, samples with the PROG_ARRAY type MAP fill this program array with bpf_load. For bpf_load to fill this map, kernel BPF program must specify the section with specific format of <prog_type>/<array_idx> (e.g. SEC("socket/0")) But by using libbpf instead of bpf_load, user program can specify which programs should be added to PROG_ARRAY. The advantage of this approach is that you can selectively add only the programs you want, rather than adding all of them to PROG_ARRAY, and it's much more intuitive than the traditional approach. This commit refactors user programs with the PROG_ARRAY type MAP with libbpf instead of using bpf_load. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200516040608.1377876-4-danieltimlee@gmail.com
2020-05-19samples, bpf: Refactor kprobe tracing user progs with libbpfDaniel T. Lee1-6/+6
Currently, the kprobe BPF program attachment method for bpf_load is quite old. The implementation of bpf_load "directly" controls and manages(create, delete) the kprobe events of DEBUGFS. On the other hand, using using the libbpf automatically manages the kprobe event. (under bpf_link interface) By calling bpf_program__attach(_kprobe) in libbpf, the corresponding kprobe is created and the BPF program will be attached to this kprobe. To remove this, by simply invoking bpf_link__destroy will clean up the event. This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with libbpf using bpf_link interface and bpf_program__attach. tracex2_kern.c, which tracks system calls (sys_*), has been modified to append prefix depending on architecture. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200516040608.1377876-3-danieltimlee@gmail.com
2020-03-23samples, bpf: Refactor perf_event user program with libbpf bpf_linkDaniel T. Lee1-2/+2
The bpf_program__attach of libbpf(using bpf_link) is much more intuitive than the previous method using ioctl. bpf_program__attach_perf_event manages the enable of perf_event and attach of BPF programs to it, so there's no neeed to do this directly with ioctl. In addition, bpf_link provides consistency in the use of API because it allows disable (detach, destroy) for multiple events to be treated as one bpf_link__destroy. Also, bpf_link__destroy manages the close() of perf_event fd. This commit refactors samples that attach the bpf program to perf_event by using libbbpf instead of ioctl. Also the bpf_load in the samples were removed and migrated to use libbbpf API. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200321100424.1593964-3-danieltimlee@gmail.com
2020-03-23samples, bpf: Move read_trace_pipe to trace_helpersDaniel T. Lee1-2/+2
To reduce the reliance of trace samples (trace*_user) on bpf_load, move read_trace_pipe to trace_helpers. By moving this bpf_loader helper elsewhere, trace functions can be easily migrated to libbbpf. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200321100424.1593964-2-danieltimlee@gmail.com
2020-02-04kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada1-59/+59
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-20samples/bpf: Use consistent include paths for libbpfToke Høiland-Jørgensen1-2/+1
Fix all files in samples/bpf to include libbpf header files with the bpf/ prefix, to be consistent with external users of the library. Also ensure that all includes of exported libbpf header files (those that are exported on 'make install' of the library) use bracketed includes instead of quoted. To make sure no new files are introduced that doesn't include the bpf/ prefix in its include, remove tools/lib/bpf from the include path entirely, and use tools/lib instead. Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157952560911.1683545.8795966751309534150.stgit@toke.dk
2020-01-20samples/bpf: Don't try to remove user's homedir on cleanToke Høiland-Jørgensen1-1/+1
The 'clean' rule in the samples/bpf Makefile tries to remove backup files (ending in ~). However, if no such files exist, it will instead try to remove the user's home directory. While the attempt is mostly harmless, it does lead to a somewhat scary warning like this: rm: cannot remove '~': Is a directory Fix this by using find instead of shell expansion to locate any actual backup files that need to be removed. Fixes: b62a796c109c ("samples/bpf: allow make to be run from samples/bpf/ directory") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/157952560126.1683545.7273054725976032511.stgit@toke.dk
2019-12-16samples/bpf: Set -fno-stack-protector when building BPF programsToke Høiland-Jørgensen1-0/+1
It seems Clang can in some cases turn on stack protection by default, which doesn't work with BPF. This was reported once before[0], but it seems the flag to explicitly turn off the stack protector wasn't added to the Makefile, so do that now. The symptom of this is compile errors like the following: error: <unknown>:0:0: in function bpf_prog1 i32 (%struct.__sk_buff*): A call to built-in function '__stack_chk_fail' is not supported. [0] https://www.spinics.net/lists/netdev/msg556400.html Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191216103819.359535-1-toke@redhat.com
2019-12-16samples/bpf: Add missing -lz to TPROGS_LDLIBSToke Høiland-Jørgensen1-1/+1
Since libbpf now links against zlib, this needs to be included in the linker invocation for the userspace programs in samples/bpf that link statically against libbpf. Fixes: 166750bc1dd2 ("libbpf: Support libbpf-provided extern variables") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20191216102405.353834-1-toke@redhat.com
2019-12-16samples/bpf: Reintroduce missed build targetsPrashant Bhole1-0/+2
Add xdp_redirect and per_socket_stats_example in build targets. They got removed from build targets in Makefile reorganization. Fixes: 1d97c6c2511f ("samples/bpf: Base target programs rules on Makefile.target") Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191216071619.25479-1-prashantbhole.linux@gmail.com
2019-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-11-20 The following pull-request contains BPF updates for your *net-next* tree. We've added 81 non-merge commits during the last 17 day(s) which contain a total of 120 files changed, 4958 insertions(+), 1081 deletions(-). There are 3 trivial conflicts, resolve it by always taking the chunk from 196e8ca74886c433: <<<<<<< HEAD ======= void *bpf_map_area_mmapable_alloc(u64 size, int numa_node); >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD void *bpf_map_area_alloc(u64 size, int numa_node) ======= static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable) >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { ======= /* kmalloc()'ed memory can't be mmap()'ed */ if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 The main changes are: 1) Addition of BPF trampoline which works as a bridge between kernel functions, BPF programs and other BPF programs along with two new use cases: i) fentry/fexit BPF programs for tracing with practically zero overhead to call into BPF (as opposed to k[ret]probes) and ii) attachment of the former to networking related programs to see input/output of networking programs (covering xdpdump use case), from Alexei Starovoitov. 2) BPF array map mmap support and use in libbpf for global data maps; also a big batch of libbpf improvements, among others, support for reading bitfields in a relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko. 3) Extend s390x JIT with usage of relative long jumps and loads in order to lift the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich. 4) Add BPF audit support and emit messages upon successful prog load and unload in order to have a timeline of events, from Daniel Borkmann and Jiri Olsa. 5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode (XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson. 6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API call named bpf_get_link_xdp_info() for retrieving the full set of prog IDs attached to XDP, from Toke Høiland-Jørgensen. 7) Add BTF support for array of int, array of struct and multidimensional arrays and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau. 8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo. 9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid xdping to be run as standalone, from Jiri Benc. 10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song. 11) Fix a memory leak in BPF fentry test run data, from Colin Ian King. 12) Various smaller misc cleanups and improvements mostly all over BPF selftests and samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11samples/bpf: adjust Makefile and README.rstJesper Dangaard Brouer1-2/+2
Side effect of some kbuild changes resulted in breaking the documented way to build samples/bpf/. This patch change the samples/bpf/Makefile to work again, when invoking make from the subdir samples/bpf/. Also update the documentation in README.rst, to reflect the new way to build. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-10samples/bpf: Add XDP_SHARED_UMEM support to xdpsockMagnus Karlsson1-0/+1
Add support for the XDP_SHARED_UMEM mode to the xdpsock sample application. As libbpf does not have a built in XDP program for this mode, we use an explicitly loaded XDP program. This also serves as an example on how to write your own XDP program that can route to an AF_XDP socket. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: William Tu <u9012063@gmail.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1573148860-30254-3-git-send-email-magnus.karlsson@intel.com
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31samples/bpf: fix build by setting HAVE_ATTR_TEST to zeroBjörn Töpel1-0/+1
To remove that test_attr__{enabled/open} are used by perf-sys.h, we set HAVE_ATTR_TEST to zero. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: KP Singh <kpsingh@google.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: http://lore.kernel.org/bpf/20191001113307.27796-3-bjorn.topel@gmail.com
2019-10-12samples/bpf: Add sysroot supportIvan Khoronzhuk1-0/+5
Basically it only enables that was added by previous couple fixes. Sysroot contains correct libs installed and its headers. Useful when working with NFC or virtual machine. Usage example: clean (on demand) make ARCH=arm -C samples/bpf clean make ARCH=arm -C tools clean make ARCH=arm clean configure and install headers: make ARCH=arm defconfig make ARCH=arm headers_install build samples/bpf: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- samples/bpf/ \ SYSROOT="path/to/sysroot" Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-15-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Provide C/LDFLAGS to libbpfIvan Khoronzhuk1-1/+2
In order to build lib using C/LD flags of target arch, provide them to libbpf make. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-14-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use target CC environment for HDR_PROBEIvan Khoronzhuk1-3/+2
No need in hacking HOSTCC to be cross-compiler any more, so drop this trick and use target CC for HDR_PROBE. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-11-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use own flags but not HOSTCFLAGSIvan Khoronzhuk1-2/+4
While compiling natively, the host's cflags and ldflags are equal to ones used from HOSTCFLAGS and HOSTLDFLAGS. When cross compiling it should have own, used for target arch. While verification, for arm, arm64 and x86_64 the following flags were used always: -Wall -O2 -fomit-frame-pointer -Wmissing-prototypes -Wstrict-prototypes So, add them as they were verified and used before adding Makefile.target and lets omit "-fomit-frame-pointer" as were proposed while review, as no sense in such optimization for samples. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-10-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Base target programs rules on Makefile.targetIvan Khoronzhuk1-66/+69
The main reason for that - HOSTCC and CC have different aims. HOSTCC is used to build programs running on host, that can cross-comple target programs with CC. It was tested for arm and arm64 cross compilation, based on linaro toolchain, but should work for others. So, in order to split cross compilation (CC) with host build (HOSTCC), lets base samples on Makefile.target. It allows to cross-compile samples/bpf programs with CC while auxialry tools running on host built with HOSTCC. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-9-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Drop unnecessarily inclusion for bpf_loadIvan Khoronzhuk1-1/+1
Drop inclusion for bpf_load -I$(objtree)/usr/include as it is included for all objects anyway, with above line: KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-7-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use __LINUX_ARM_ARCH__ selector for armIvan Khoronzhuk1-0/+8
For arm, -D__LINUX_ARM_ARCH__=X is min version used as instruction set selector and is absolutely required while parsing some parts of headers. It's present in KBUILD_CFLAGS but not in autoconf.h, so let's retrieve it from and add to programs cflags. In another case errors like "SMP is not supported" for armv7 and bunch of other errors are issued resulting to incorrect final object. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191011002808.28206-6-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use own EXTRA_CFLAGS for clang commandsIvan Khoronzhuk1-4/+5
It can overlap with CFLAGS used for libraries built with gcc if not now then in next patches. Correct it here for simplicity. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-5-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Use --target from cross-compileIvan Khoronzhuk1-1/+1
For cross compiling the target triple can be inherited from cross-compile prefix as it's done in CLANG_FLAGS from kernel makefile. So copy-paste this decision from kernel Makefile. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-4-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Fix cookie_uid_helper_example obj buildIvan Khoronzhuk1-1/+0
Don't list userspace "cookie_uid_helper_example" object in list for bpf objects. 'always' target is used for listing bpf programs, but 'cookie_uid_helper_example.o' is a user space ELF file, and covered by rule `per_socket_stats_example`, so shouldn't be in 'always'. Let us remove `always += cookie_uid_helper_example.o`, which avoids breaking cross compilation due to mismatched includes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-3-ivan.khoronzhuk@linaro.org
2019-10-12samples/bpf: Fix HDR_PROBE "echo"Ivan Khoronzhuk1-1/+1
echo should be replaced with echo -e to handle '\n' correctly, but instead, replace it with printf as some systems can't handle echo -e. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191011002808.28206-2-ivan.khoronzhuk@linaro.org
2019-10-08libbpf: Move bpf_{helpers, helper_defs, endian, tracing}.h into libbpfAndrii Nakryiko1-1/+1
Move bpf_helpers.h, bpf_tracing.h, and bpf_endian.h into libbpf. Move bpf_helper_defs.h generation into libbpf's Makefile. Ensure all those headers are installed along the other libbpf headers. Also, adjust selftests and samples include path to include libbpf now. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191008175942.1769476-6-andriin@fb.com
2019-07-15samples/bpf: build with -D__TARGET_ARCH_$(SRCARCH)Ilya Leoshkevich1-1/+1
While $ARCH can be relatively flexible (see Makefile and tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory name under arch/. Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that matches the expectations of bpf_helpers.h. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03samples/bpf: add sample program that periodically dumps TCP statsStanislav Fomichev1-0/+1
Uses new RTT callback to dump stats every second. $ mkdir -p /tmp/cgroupv2 $ mount -t cgroup2 none /tmp/cgroupv2 $ mkdir -p /tmp/cgroupv2/foo $ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs $ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog $ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog $ bpftool prog tracelog $ # run neper/netperf/etc Used neper to compare performance with and without this program attached and didn't see any noticeable performance impact. Sample output: <idle>-0 [015] ..s. 2074.128800: 0: dsack_dups=0 delivered=242526 <idle>-0 [015] ..s. 2074.128808: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [015] ..s. 2075.130133: 0: dsack_dups=0 delivered=323599 <idle>-0 [015] ..s. 2075.130138: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [005] .Ns. 2076.131440: 0: dsack_dups=0 delivered=404648 <idle>-0 [005] .Ns. 2076.131447: 0: delivered_ce=0 icsk_retransmits=0 Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf: Add support for fq's EDT to HBMbrakmo1-0/+2
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth Manager). Includes a new BPF program supporting EDT, and also updates corresponding programs. It will drop packets with an EDT of more than 500us in the future unless the packet belongs to a flow with less than 2 packets in flight. This is done so each flow has at least 2 packets in flight, so they will not starve, and also to help prevent delayed ACK timeouts. It will also work with ECN enabled traffic, where the packets will be CE marked if their EDT is more than 50us in the future. The table below shows some performance numbers. The flows are back to back RPCS. One server sending to another, either 2 or 4 flows. One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more than one flow of a given RPC size, the numbers represent averages. The rate limit applies to all flows (they are in the same cgroup). Tests ending with "-edt" ran with the new BPF program supporting EDT. Tests ending with "-hbt" ran on top HBT qdisc with the specified rate (i.e. no HBM). The other tests ran with the HBM BPF program included in the HBM patch-set. EDT has limited value when using DCTCP, but it helps in many cases when using Cubic. It usually achieves larger link utilization and lower 99% latencies for the 1MB RPCs. HBM ends up queueing a lot of packets with its default parameter values, reducing the goodput of the 10KB RPCs and increasing their latency. Also, the RTTs seen by the flows are quite large. Aggr 10K 10K 10K 1MB 1MB 1MB Limit rate drops RTT rate P90 P99 rate P90 P99 Test rate Flows Mbps % us Mbps us us Mbps ms ms -------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ---- cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5 cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2 dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9 dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0 cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9 cubic 200M 2 155 0.30 220 81 532 655 74 283 450 cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85 dctcp 200M 2 188 0.03 111 77 912 939 111 76 325 dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79 cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50 cubic 1G 4 952 0.03 110 165 516 546 262 38 154 cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79 dctcp 1G 4 951 0.00 103 180 617 905 257 37 38 dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55 cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34 cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17 cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16 dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9 dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26 v1 -> v2: Incorporated Andrii's suggestions v2 -> v3: Incorporated Yonghong's suggestions v3 -> v4: Removed credit update that is not needed Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-18samples: bpf: remove unnecessary include options in MakefileDaniel T. Lee1-9/+0
Due to recent change of include path at commit b552d33c80a9 ("samples/bpf: fix include path in Makefile"), some of the previous include options became unnecessary. This commit removes duplicated include options in Makefile. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-15samples/bpf: fix include path in MakefilePrashant Bhole1-1/+1
Recent commit included libbpf.h in selftests/bpf/bpf_util.h. Since some samples use bpf_util.h and samples/bpf/Makefile doesn't have libbpf.h path included, build was failing. Let's add the path in samples/bpf/Makefile. Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-10samples: bpf: don't run probes at the local make stageJakub Kicinski1-0/+3
Quentin reports that commit 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install") is producing the false positive when make is invoked locally, from the samples/bpf/ directory. When make is run locally it hits the "all" target, which will recursively invoke make through the full build system. Speed up the "local" run which doesn't actually build anything, and avoid false positives by skipping all the probes if not in kbuild environment (cover both the new warning and the BTF probes). Reported-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-06samples: bpf: print a warning about headers_installJakub Kicinski1-0/+9
It seems like periodically someone posts patches to "fix" header includes. The issue is that samples expect the include path to have the uAPI headers (from usr/) first, and then tools/ headers, so that locally installed uAPI headers take precedence. This means that if users didn't run headers_install they will see all sort of strange compilation errors, e.g.: HOSTCC samples/bpf/test_lru_dist samples/bpf/test_lru_dist.c:39:8: error: redefinition of ‘struct list_head’ struct list_head { ^~~~~~~~~ In file included from samples/bpf/test_lru_dist.c:9:0: ../tools/include/linux/types.h:69:8: note: originally defined here struct list_head { ^~~~~~~~~ Try to detect this situation, and print a helpful warning. v2: just use HOSTCC (Jiong). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-28selftests/bpf: convert test_cgrp2_attach2 example into kselftestRoman Gushchin1-2/+0
Convert test_cgrp2_attach2 example into a proper test_cgroup_attach kselftest. It's better because we do run kselftest on a constant basis, so there are better chances to spot a potential regression. Also make it slightly less verbose to conform kselftests output style. Output example: $ ./test_cgroup_attach #override:PASS #multi:PASS test_cgroup_attach:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-27BPF: Add sample code for new ib_umad tracepointIra Weiny1-0/+3
Provide a count of class types for a summary of MAD packets. The example shows one way to filter the trace data based on management class. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-02bpf: User program for testing HBMbrakmo1-0/+3
The program nrm creates a cgroup and attaches a BPF program to the cgroup for testing HBM (Host Bandwidth Manager) for egress traffic. One still needs to create network traffic. This can be done through netesto, netperf or iperf3. A follow-up patch contains a script to create traffic. USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>] [-w] [-h] [prog] Where: -d Print BPF trace debug buffer -l Also limit flows doing loopback -n <#> To create cgroup "/hbm#" and attach prog. Default is /nrm1 This is convenient when testing HBM in more than 1 cgroup -r <rate> Rate limit in Mbps -s Get HBM stats (marked, dropped, etc.) -t <time> Exit after specified seconds (deault is 0) -w Work conserving flag. cgroup can increase its bandwidth beyond the rate limit specified while there is available bandwidth. Current implementation assumes there is only NIC (eth0), but can be extended to support multiple NICs. Currrently only supported for egress. Note, this is just a proof of concept. -h Print this info prog BPF program file name. Name defaults to hbm_out_kern.o More information about HBM can be found in the paper "BPF Host Resource Management" presented at the 2018 Linux Plumbers Conference, Networking Track (http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf) Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02bpf: Sample HBM BPF program to limit egress bwbrakmo1-0/+2
A cgroup skb BPF program to limit cgroup output bandwidth. It uses a modified virtual token bucket queue to limit average egress bandwidth. The implementation uses credits instead of tokens. Negative credits imply that queueing would have happened (this is a virtual queue, so no queueing is done by it. However, queueing may occur at the actual qdisc (which is not used for rate limiting). This implementation uses 3 thresholds, one to start marking packets and the other two to drop packets: CREDIT - <--------------------------|------------------------> + | | | 0 | Large pkt | | drop thresh | Small pkt drop Mark threshold thresh The effect of marking depends on the type of packet: a) If the packet is ECN enabled, then the packet is ECN ce marked. The current mark threshold is tuned for DCTCP. c) Else, it is dropped if it is a large packet. If the credit is below the drop threshold, the packet is dropped. Note that dropping a packet through the BPF program does not trigger CWR (Congestion Window Reduction) in TCP packets. A future patch will add support for triggering CWR. This BPF program actually uses 2 drop thresholds, one threshold for larger packets (>= 120 bytes) and another for smaller packets. This protects smaller packets such as SYNs, ACKs, etc. The default bandwidth limit is set at 1Gbps but this can be changed by a user program through a shared BPF map. In addition, by default this BPF program does not limit connections using loopback. This behavior can be overwritten by the user program. There is also an option to calculate some statistics, such as percent of packets marked or dropped, which the user program can access. A latter patch provides such a program (hbm.c) Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-01samples: bpf: use libbpf where easyJakub Kicinski1-3/+3
Some samples don't really need the magic of bpf_load, switch them to libbpf. v2: - specify program types. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: remove load_sock_ops in favour of bpftoolJakub Kicinski1-2/+0
bpftool can do all the things load_sock_ops used to do, and more. Point users to bpftool instead of maintaining this sample utility. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-25samples/bpf: convert xdpsock to use libbpf for AF_XDP accessMagnus Karlsson1-1/+0
This commit converts the xdpsock sample application to use the AF_XDP functions present in libbpf. This cuts down the size of it by nearly 300 lines of code. The default ring sizes plus the batch size has been increased and the size of the umem area has decreased. This so that the sample application will provide higher throughput. Note also that the shared umem code has been removed from the sample as this is not supported by libbpf at this point in time. Tested-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01samples/bpf: Convert XDP samples to libbpf usageMaciej Fijalkowski1-4/+4
Some of XDP samples that are attaching the bpf program to the interface via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for loading and manipulating the ebpf program and maps. Convert them to do this through libbpf usage and remove bpf_load from the picture. While at it remove what looks like debug leftover in xdp_redirect_map_user.c In xdp_redirect_cpu, change the way that the program to be loaded onto interface is chosen - user now needs to pass the program's section name instead of the relative number. In case of typo print out the section names to choose from. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15samples/bpf: workaround clang asm goto compilation errorsYonghong Song1-0/+1
x86 compilation has required asm goto support since 4.17. Since clang does not support asm goto, at 4.17, Commit b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation") worked around the issue by permitting an alternative implementation without asm goto for clang. At 5.0, more asm goto usages appeared. [yhs@148 x86]$ egrep -r asm_volatile_goto include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ [yhs@148 x86]$ Compiling samples/bpf directories, most bpf programs failed compilation with error messages like: In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2: In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6: In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15: In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9: In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72: /home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl", ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc' __GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \ ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc' asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ ^ /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x) Most implementation does not even provide an alternative implementation. And it is also not practical to make changes for each call site. This patch workarounded the asm goto issue by redefining the macro like below: #define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto") If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes. With this patch, all bpf programs under samples/bpf can pass compilation. Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as they do not access kernel internal headers. Fixes: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Fixes: 18fe58229d80 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition") Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-29Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-3/+1
Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-23treewide: add intermediate .s files to targetsMasahiro Yamada1-0/+1
Avoid unneeded recreation of these in the incremental build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-23treewide: remove explicit rules for *offsets.sMasahiro Yamada1-3/+0
These explicit rules are unneeded because scripts/Makefile.build provides a pattern rule to create %.s from %.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-20tools/bpf: do not use pahole if clang/llvm can generate BTF sectionsYonghong Song1-0/+8
Add additional checks in tools/testing/selftests/bpf and samples/bpf such that if clang/llvm compiler can generate BTF sections, do not use pahole. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-09-01bpf: add TCP_SAVE_SYN/TCP_SAVED_SYN sample programNikita V. Shirokov1-0/+1
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example: bpf program which is doing TOS/TCLASS reflection (server would reply with a same TOS/TCLASS as client). Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-3/+22
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-27samples: bpf: convert xdpsock_user.c to libbpfJakub Kicinski1-1/+1
Convert xdpsock_user.c to use libbpf instead of bpf_load.o. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.