| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is the follow-up to commit a79be02bba5c ("Fix mis-uses of
'cc-option' for warning disablement") where I mentioned that the best
fix would be to just make 'cc-option' a bit smarter, and work for all
compiler options, including the '-Wno-xyzzy' pattern that it used to
accept unknown options for.
It turns out that fixing cc-option is pretty straightforward: just
rewrite any '-Wno-xyzzy' option pattern to use '-Wxyzzy' instead for
testing.
That makes the whole artificial distinction between 'cc-option' and
'cc-disable-warning' go away, and we can happily forget about the odd
build rule that you have to treat compiler options that disable warnings
specially.
The 'cc-disable-warning' helper remains as a backwards compatibility
syntax for now, but is implemented in terms of the new and improved
cc-option.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the zoned mode there's a bug in the extent buffer tree conversion to
xarray. The reference for eb is dropped and code continues but the
references get dropped by releasing the batch.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/linux-btrfs/202505191521.435b97ac-lkp@intel.com/
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Only set the partial block length to zero if the algorithm is
block-only. Otherwise the descriptor context could be empty,
e.g., for digest_null.
Reported-by: syzbot+4851c19615d35f0e4d68@syzkaller.appspotmail.com
Fixes: 7650f826f7b2 ("crypto: shash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xfstests generic/482 tests the file system consistency after each
FUA operation. It fails when run on exfat.
exFAT clears the volume dirty flag with a FUA operation during sync.
Since s_lock is not held when data is being written to a file, sync
can be executed at the same time. When data is being written to a
file, the FAT chain is updated first, and then the file size is
updated. If sync is executed between updating them, the length of the
FAT chain may be inconsistent with the file size.
To avoid the situation where the file system is inconsistent but the
volume dirty flag is cleared, this commit moves the clearing of the
volume dirty flag from exfat_fs_sync() to exfat_put_super(), so that
the volume dirty flag is not cleared until unmounting. After the
move, there is no additional action during sync, so exfat_fs_sync()
can be deleted.
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The double free could happen in the following path.
exfat_create_upcase_table()
exfat_create_upcase_table() : return error
exfat_free_upcase_table() : free ->vol_utbl
exfat_load_default_upcase_table : return error
exfat_kill_sb()
delayed_free()
exfat_free_upcase_table() <--------- double free
This patch set ->vol_util as NULL after freeing it.
Reported-by: Jianzhou Zhao <xnxc22xnxc22@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
irq_fpu_usable() incorrectly returned true before the FPU is
initialized. The x86 CPU onlining code can call sha256() to checksum
AMD microcode images, before the FPU is initialized. Since sha256()
recently gained a kernel-mode FPU optimized code path, a crash occurred
in kernel_fpu_begin_mask() during hotplug CPU onlining.
(The crash did not occur during boot-time CPU onlining, since the
optimized sha256() code is not enabled until subsys_initcalls run.)
Fix this by making irq_fpu_usable() return false before fpu__init_cpu()
has run. To do this without adding any additional overhead to
irq_fpu_usable(), replace the existing per-CPU bool in_kernel_fpu with
kernel_fpu_allowed which tracks both initialization and usage rather
than just usage. The initial state is false; FPU initialization sets it
to true; kernel-mode FPU sections toggle it to false and then back to
true; and CPU offlining restores it to the initial state of false.
Fixes: 11d7956d526f ("crypto: x86/sha256 - implement library instead of shash")
Reported-by: Ayush Jain <Ayush.Jain3@amd.com>
Closes: https://lore.kernel.org/r/20250516112217.GBaCcf6Yoc6LkIIryP@fat_crate.local
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ayush Jain <Ayush.Jain3@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
|
|
This is kind of last-minute, but Al Viro reported that the new
FOP_DONTCACHE flag causes memory corruption due to use-after-free
issues.
This was triggered by commit 974c5e6139db ("xfs: flag as supporting
FOP_DONTCACHE"), but that is not the underlying bug - it is just the
first user of the flag.
Vlastimil Babka suspects the underlying problem stems from the
folio_end_writeback() logic introduced in commit fb7d3bc414939
("mm/filemap: drop streaming/uncached pages when writeback completes").
The most straightforward fix would be to just revert the commit that
exposed this, but Matthew Wilcox points out that other filesystems are
also starting to enable the FOP_DONTCACHE logic, so this instead
disables that bit globally for now.
The fix will hopefully end up being trivial and we can just re-enable
this logic after more testing, but until such a time we'll have to
disable the new FOP_DONTCACHE flag.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20250525083209.GS2023217@ZenIV/
Triggered-by: 974c5e6139db ("xfs: flag as supporting FOP_DONTCACHE")
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the current employer email address to mailmap.
Link: https://lkml.kernel.org/r/20250523121105.15850-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Antonio Quartulli <antonio@openvpn.net>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am seeing soft lockup on certain machine types when a cgroup OOMs. This
is happening because killing the process in certain machine might be very
slow, which causes the soft lockup and RCU stalls. This happens usually
when the cgroup has MANY processes and memory.oom.group is set.
Example I am seeing in real production:
[462012.244552] Memory cgroup out of memory: Killed process 3370438 (crosvm) ....
....
[462037.318059] Memory cgroup out of memory: Killed process 4171372 (adb) ....
[462037.348314] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [stat_manager-ag:1618982]
....
Quick look at why this is so slow, it seems to be related to serial flush
for certain machine types. For all the crashes I saw, the target CPU was
at console_flush_all().
In the case above, there are thousands of processes in the cgroup, and it
is soft locking up before it reaches the 1024 limit in the code (which
would call the cond_resched()). So, cond_resched() in 1024 blocks is not
sufficient.
Remove the counter-based conditional rescheduling logic and call
cond_resched() unconditionally after each task iteration, after fn() is
called. This avoids the lockup independently of how slow fn() is.
Link: https://lkml.kernel.org/r/20250523-memcg_fix-v1-1-ad3eafb60477@debian.org
Fixes: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michael van der Westhuizen <rmikey@meta.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL.
Link: https://lkml.kernel.org/r/1747884137-26685-1-git-send-email-yangge1116@126.com
Fixes: 04f13d241b8b ("mm: replace free hugepage folios after migration")
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The common case is to grow reallocations, and since init_on_alloc will
have already zeroed the whole allocation, we only need to zero when
shrinking the allocation.
Link: https://lkml.kernel.org/r/20250515214217.619685-2-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: vmalloc: Actually use the in-place vrealloc region".
This fixes a performance regression[1] with vrealloc()[1].
The refactoring to not build a new vmalloc region only actually worked
when shrinking. Actually return the resized area when it grows. Ugh.
Link: https://lkml.kernel.org/r/20250515214217.619685-1-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/all/20250515-bpf-verifier-slowdown-vwo2meju4cgp2su5ckj@6gi6ssxbnfqg [1]
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When module load fails after memory for codetag section is ready, codetag
section memory will not be properly released. This causes memory leak,
and if next module load happens to get the same module address, codetag
may pick the uninitialized section when manipulating tags during module
unload, and leads to "unable to handle page fault" BUG.
Link: https://lkml.kernel.org/r/20250519163823.7540-1-00107082@163.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pratyush Yadav reports the following crash:
------------[ cut here ]------------
kernel BUG at arch/x86/mm/physaddr.c:23!
ception 0x06 IP 10:ffffffff812ebbf8 error 0 cr2 0xffff88903ffff000
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc6+ #231 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:__phys_addr+0x58/0x60
Code: 01 48 89 c2 48 d3 ea 48 85 d2 75 05 e9 91 52 cf 00 0f 0b 48 3d ff ff ff 1f 77 0f 48 8b 05 20 54 55 01 48 01 d0 e9 78 52 cf 00 <0f> 0b 90 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0000:ffffffff82803dd8 EFLAGS: 00010006 ORIG_RAX: 0000000000000000
RAX: 000000007fffffff RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000007fffffff RSI: 0000000280000000 RDI: ffffffffffffffff
RBP: ffffffff82803e68 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff83153180 R11: ffffffff82803e48 R12: ffffffff83c9aed0
R13: 0000000000000000 R14: 0000001040000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:0000000000000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88903ffff000 CR3: 0000000002838000 CR4: 00000000000000b0
Call Trace:
<TASK>
? __cma_declare_contiguous_nid+0x6e/0x340
? cma_declare_contiguous_nid+0x33/0x70
? dma_contiguous_reserve_area+0x2f/0x70
? setup_arch+0x6f1/0x870
? start_kernel+0x52/0x4b0
? x86_64_start_reservations+0x29/0x30
? x86_64_start_kernel+0x7c/0x80
? common_startup_64+0x13e/0x141
The reason is that __cma_declare_contiguous_nid() does:
highmem_start = __pa(high_memory - 1) + 1;
If dma_contiguous_reserve_area() (or any other CMA declaration) is
called before free_area_init(), high_memory is uninitialized. Without
CONFIG_DEBUG_VIRTUAL, it will likely work but use the wrong value for
highmem_start.
The issue occurs because commit e120d1bc12da ("arch, mm: set high_memory
in free_area_init()") moved initialization of high_memory after the call
to dma_contiguous_reserve() -> __cma_declare_contiguous_nid() on several
architectures.
In the case CONFIG_HIGHMEM is enabled, some architectures that actually
support HIGHMEM (arm, powerpc and x86) have initialization of high_memory
before a possible call to __cma_declare_contiguous_nid() and some
initialized high_memory late anyway (arc, csky, microblase, mips, sparc,
xtensa) even before the commit e120d1bc12da so they are fine with using
uninitialized value of high_memory.
And in the case CONFIG_HIGHMEM is disabled high_memory essentially becomes
the first address after memory end, so instead of relying on high_memory
to calculate highmem_start use memblock_end_of_DRAM() and eliminate the
dependency of CMA area creation on high_memory in majority of
configurations.
Link: https://lkml.kernel.org/r/20250519171805.1288393-1-rppt@kernel.org
Fixes: e120d1bc12da ("arch, mm: set high_memory in free_area_init()")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do a bit of readability spring cleaning:
- Fix misaligned structure member in perf_addr_filter: the new
struct perf_addr_filter::action member was too long, but when
it was added it was not aligned properly. Align all fields to
the customary column 41 alignment of most of the rest of the
header.
- Adjust the vertical alignment of the definition of other
structures and definitions as well, so that the 'most of' in
the previous paragraph changes to 'all of'. ;-)
- Prettify the assignments in perf_clear_branch_entry_bitfields()
- Move comments from CPP definitions to outside the macro
- Move perf_guest_info_callbacks and related defines from the front
of the header closer to where it's used within the header.
- And more #endif markers for larger CPP blocks and standardize
#if/#else/#endif blocks to the following nomenclature:
#ifdef CONFIG_FOO
...
#else /* !CONFIG_FOO: */
...
#endif /* !CONFIG_FOO */
- Standardize on consistently using the 'extern' storage class where
appropriate, we had cases where method prototypes sometimes omitted
the storage class:
extern void perf_pmu_migrate_context(struct pmu *pmu,
int src_cpu, int dst_cpu);
int perf_event_read_local(struct perf_event *event, u64 *value,
u64 *enabled, u64 *running);
extern u64 perf_event_read_value(struct perf_event *event,
u64 *enabled, u64 *running);
Which is obviously a bit confusing and adds unnecessary noise.
- s/__u64/u64 and similar cleanups: there's no point in using __u64
in non-UAPI headers, and doing so only adds unnecessary visual noise.
- Harmonize all multi-parameter function prototypes along the following
style:
extern struct perf_event *
perf_event_create_kernel_counter(struct perf_event_attr *attr,
int cpu,
struct task_struct *task,
perf_overflow_handler_t callback,
void *context);
- etc.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch introduces the use of the Intel QAT to offload EROFS data
decompression, aiming to improve the decompression performance.
A 285MiB dataset is used with the following command to create EROFS
images with different cluster sizes:
$ mkfs.erofs -zdeflate,level=9 -C{4096,16384,65536,131072,262144}
Fio is used to test the following read patterns:
$ fio -filename=testfile -bs=4k -rw=read -name=job1
$ fio -filename=testfile -bs=4k -rw=randread -name=job1
$ fio -filename=testfile -bs=4k -rw=randread --io_size=14m -name=job1
Here are some performance numbers for reference:
Processors: Intel(R) Xeon(R) 6766E (144 cores)
Memory: 512 GiB
|-----------------------------------------------------------------------------|
| | Cluster size | sequential read | randread | small randread(5%) |
|-----------|--------------|-----------------|-----------|--------------------|
| Intel QAT | 4096 | 538 MiB/s | 112 MiB/s | 20.76 MiB/s |
| Intel QAT | 16384 | 699 MiB/s | 158 MiB/s | 21.02 MiB/s |
| Intel QAT | 65536 | 917 MiB/s | 278 MiB/s | 20.90 MiB/s |
| Intel QAT | 131072 | 1056 MiB/s | 351 MiB/s | 23.36 MiB/s |
| Intel QAT | 262144 | 1145 MiB/s | 431 MiB/s | 26.66 MiB/s |
| deflate | 4096 | 499 MiB/s | 108 MiB/s | 21.50 MiB/s |
| deflate | 16384 | 422 MiB/s | 125 MiB/s | 18.94 MiB/s |
| deflate | 65536 | 452 MiB/s | 159 MiB/s | 13.02 MiB/s |
| deflate | 131072 | 452 MiB/s | 177 MiB/s | 11.44 MiB/s |
| deflate | 262144 | 466 MiB/s | 194 MiB/s | 10.60 MiB/s |
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250522094931.28956-1-liubo03@inspur.com
[ Gao Xiang: refine the commit message. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Fixes: 76b8f81a5b92 ("drm/nouveau: improve handling of 64-bit BARs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/334404bdf60765cb5a8e855a74c688bc537531ee.camel@nvidia.com/T/#t
|
|
Large folios aren't supported without TRANSPARENT_HUGEPAGE
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't unlock a should_be_locked path unless we're in a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions differ on the size of the blacklist range; it is
theoretically possible that we could end up with blacklisted journal
sequence numbers newer than the newest seq we find in the journal, and
pick a new start seq that's blacklisted.
Explicitly check for this in bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want to change the bucket gen, on gen mismatch: it's possible
to have multiple btree nodes with different gens in the same bucket that
we want to keep, if we have to recover from btree node scan.
It's also not necessary to set g->gen_valid; add a comment to that
effect.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was lost in the giant recovery pass rework - but it's used heavily
by bcachefs subcommand utilities.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go to allocate and find taht a bucket in the freespace btree is
actually allocated, we're supposed to return nonzero to tell the
allocator to skip it.
This fixes an emergency read only due to a bucket/ptr gen mismatch - we
also don't return the correct bucket gen when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 010c89468134 ("bcachefs: Check for casefolded dirents in non casefolded dirs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Per the spec, the default max memory region must be 1 covering
all system memory.
When platform does not provide ACPI MRRM table or
when CONFIG_ACPI is opted out, the acpi_mrrm_max_mem_region() function
defaults to returning 1 region complying to RDT spec.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250523172001.1761634-1-anil.s.keshavamurthy@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
When submitting of the descriptors fails, it is quite likely that
the register read buffer contains no valid data. Even if the data
is valid the function returns with an error code anyway.
Change the code to return early if qcom_submit_descs() fails to
avoid superfluously copying possibly invalid data.
Also change the return statement at the end of the function to use
zero value to indicate success obviusly.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250515-qpic-snand-early-error-v1-1-681c87611213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add test generic_11 for covering new control command of
UBLK_U_CMD_QUIESCE_DEV.
Add 'quiesce -n dev_id' sub-command on ublk utility for transitioning
device state to quiesce states, then verify the feature via generic_10
by doing quiesce and recovery.
Cc: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE.
Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for
supporting this feature, then verify the feature via generic_10.
Cc: Omri Mann <omri@nvidia.com>
Cc: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Filesystems like XFS can implement atomic write I/O using either
REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful
if we have a flag in trace events to distinguish between the two. This
patch adds char 'U' (Untorn writes) to rwbs field of the trace events
if REQ_ATOMIC flag is set in the bio.
<W/ REQ_ATOMIC>
=================
xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0]
<W/O REQ_ATOMIC>
===============
xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix a sparse warning by making the ops_ipq5018 struct static.
Fixes: 04b31cc53fe0 ("thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505202356.S21Sc7bk-lkp@intel.com/
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ipq5018-tsens-sparse-v1-1-97edaaaef27c@outlook.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250522083157.1957240-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI sysfs code will fail to initialize if acpi_kobj is NULL,
together with some ACPI drivers.
Follow the other firmware subsystems and bail out if the kobject
cannot be registered.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250518185111.3560-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The platform profile driver is loaded even on platforms that do not have
ACPI enabled. The initialization of the sysfs entries was recently moved
from platform_profile_register() to the module init call, and those
entries need acpi_kobj to be initialized which is not the case when ACPI
is disabled.
This results in the following warning:
WARNING: CPU: 5 PID: 1 at fs/sysfs/group.c:131 internal_create_group+0xa22/0xdd8
Modules linked in:
CPU: 5 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.15.0-rc7-dirty #6 PREEMPT
Tainted: [W]=WARN
Hardware name: riscv-virtio,qemu (DT)
epc : internal_create_group+0xa22/0xdd8
ra : internal_create_group+0xa22/0xdd8
Call Trace:
internal_create_group+0xa22/0xdd8
sysfs_create_group+0x22/0x2e
platform_profile_init+0x74/0xb2
do_one_initcall+0x198/0xa9e
kernel_init_freeable+0x6d8/0x780
kernel_init+0x28/0x24c
ret_from_fork+0xe/0x18
Fix this by checking if ACPI is enabled before trying to create sysfs
entries.
Fixes: 77be5cacb2c2 ("ACPI: platform_profile: Create class for ACPI platform profile")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250522141410.31315-1-alexghiti@rivosinc.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250523102102.1177151-1-perex@perex.cz
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For IORING_URING_CMD_FIXED-less commands io_uring doesn't pull buf_index
from the sqe, so imports might succeed if the index coincide, e.g. when
it's 0, but otherwise it's error prone. Warn if someone tries to import
without the flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/a1c2c88e53c3fe96978f23d50c6bc66c2c79c337.1747991070.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to commit 8f6116b5b77b ("statmount: add a new supported_mask
field"), STATMOUNT_SUPPORTED macro shall be updated whenever a new flag
is added.
Fixes: 7a54947e727b ("Merge patch series "fs: allow changing idmappings"")
Signed-off-by: "Dmitry V. Levin" <ldv@strace.io>
Link: https://lore.kernel.org/20250511224953.GA17849@strace.io
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In prior kernel versions (5.8-6.8), commit 9f6c61f96f2d9 ("proc/mounts:
add cursor") introduced MNT_CURSOR, a flag used by readers from
/proc/mounts to keep their place while reading the file. Later, commit
2eea9ce4310d8 ("mounts: keep list of mounts in an rbtree") removed this
flag and its value has since been repurposed.
For debuggers iterating over the list of mounts, cursors should be
skipped as they are irrelevant. Detecting whether an element is a cursor
can be difficult. Since the MNT_CURSOR flag is a preprocessor constant,
it's not present in debuginfo, and since its value is repurposed, we
cannot hard-code it. For this specific issue, cursors are possible to
detect in other ways, but ideally, we would be able to read the mount
flag definitions out of the debuginfo. For that reason, convert the
mount flags to an enum.
Link: https://github.com/osandov/drgn/pull/496
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/20250507223402.2795029-1-stephen.s.brennan@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Not since 8f2918898eb5 "new helpers: vfs_create_mount(), fc_mount()"
back in 2018. Get rid of the dead checks...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250421033509.GV2023217@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some comments in there highlighting a few non-obvious assumptions.
Link: https://lore.kernel.org/20250416-zerknirschen-aluminium-14a55639076f@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hashed work is serialized by io-wq, intended to be used for cases like
serializing buffered writes to a regular file, where the file system
will serialize the workers anyway with a mutex or similar. Since they
would be forcibly serialized and blocked, it's more efficient for io-wq
to handle these individually rather than issue them in parallel.
If a worker is currently handling a hashed work item and gets blocked,
don't create a new worker if the next work item is also hashed and
mapped to the same bucket. That new worker would not be able to make any
progress anyway.
Reported-by: Fengnan Chang <changfengnan@bytedance.com>
Reported-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/io-uring/20250522090909.73212-1-changfengnan@bytedance.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When an io-wq worker goes to sleep, it checks if there's work to do.
If there is, it'll create a new worker. But if this worker is currently
idle, it'll either get woken right back up immediately, or someone
else has already created the necessary worker to handle this work.
Only go through the worker creation logic if the current worker is
currently handling a work item. That means it's being scheduled out as
part of handling that work, not just going to sleep on its own.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just in preparation for using them higher up in the function, move
these generic helpers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Linus Torvalds
Josef Bacik
Herbert Xu
Yuezhang Mo
Namjae Jeon
Eric Biggers
Jarkko Sakkinen
Ricardo Cañuelo Navarro
Breno Leitao
Ge Yang
Kees Cook
Suren Baghdasaryan
David Wang
Mike Rapoport (Microsoft)
Ingo Molnar
Bo Liu
Dan Carpenter
Kent Overstreet
Anil S Keshavamurthy
Stuart Yoder
Yeoreum Yun
Colin Ian King
Gabor Juhos
Ming Lei
Ritesh Harjani (IBM)
George Moussalem
Armin Wolf
Alexandre Ghiti
Jaroslav Kysela
Pavel Begunkov
Dmitry V. Levin
Stephen Brennan
Al Viro
Christian Brauner
Jens Axboe