| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
|
|
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
|
Pull x86 build updates from Borislav Petkov:
- Fix stack protector builds when cross compiling with Clang
- Other Kbuild improvements and fixes
* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Omit use of bin2c
x86/purgatory: Hard-code obj-y in Makefile
x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang
|
|
The .incbin assembler directive is much faster than bin2c + $(CC).
Do similar refactoring as in
4c0f032d4963 ("s390/purgatory: Omit use of bin2c").
Please note the .quad directive matches to size_t in C (both 8
byte) because the purgatory is compiled only for the 64-bit kernel.
(KEXEC_FILE depends on X86_64).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220725020812.622255-2-masahiroy@kernel.org
|
|
Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.
Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Fixes: cfc1d277891e ("module: Move all into module/")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull x86 retbleed fixes from Borislav Petkov:
"Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the
now pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide"
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
x86/speculation: Disable RRSBA behavior
x86/kexec: Disable RET on kexec
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
x86/bugs: Add Cannon lake to RETBleed affected CPU list
x86/retbleed: Add fine grained Kconfig knobs
x86/cpu/amd: Enumerate BTC_NO
x86/common: Stamp out the stepping madness
KVM: VMX: Prevent RSB underflow before vmenter
x86/speculation: Fill RSB on vmexit for IBRS
KVM: VMX: Fix IBRS handling after vmexit
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
KVM: VMX: Convert launched argument to flags
KVM: VMX: Flatten __vmx_vcpu_run()
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
x86/speculation: Remove x86_spec_ctrl_mask
x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
x86/speculation: Fix SPEC_CTRL write on SMT state change
x86/speculation: Fix firmware entry SPEC_CTRL handling
x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
...
|
|
Taint the kernel with TAINT_TEST whenever a test module loads, by adding
a new "TEST" module property, and setting it for all modules in the
tools/testing directory. This property can also be set manually, for
tests which live outside the tools/testing directory with:
MODULE_INFO(test, "Y");
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 65ce9c38326e ("kbuild: move module strip/compression code into
scripts/Makefile.modinst") added this unused code.
Perhaps, I thought cmd_none was useful for CONFIG_MODULE_COMPRESS_NONE,
but I did not use it after all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Newer versions of Sphinx have a known bug:
https://github.com/sphinx-doc/sphinx/pull/8313
Those currently produces 11 false-positive warnings On Sphinx
version 3.1+.
While Sphinx fix is not applied, let's warn adventurers that would
be using Sphinx installed via distro packages.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As it is not a consensus about installing sphinx using venv, and
modern distributions are now shipping with Sphinx versions above
the minimal requirements to build the docs, provide both venv
and package install commands by default.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/7c99d985df204c73e3daafd5fd2f30a31269405d.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Better to add the PDF note late for venv recommendation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/8e117aabe6dfa1b1ec92dccd20e801393c977667.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
After distro upgrades, the directory names for python may change.
On such case, the previously-created venv will be broken, and
sphinx-build won't run.
Add a logic to report it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/f117f03555b0636d2be0b68f3a23b1d3f03ccf1d.1656756450.git.mchehab@kernel.org
[jc: fixed typo in warning message]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The logic which checks if the venv version is good enough
but was not activated is broken: it is checking against
the wrong val, making it to recommend to re-create a venv
every time. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/afe01b7863fd655986d84ace8948f3d7aede796d.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
I tried running `make pdfdocs` on NixOS, but it failed because
get_feat.pl uses a shebang line with /usr/bin/perl, and that file path
doesn't exist on NixOS. Using the more portable /usr/bin/env perl fixes
the problem.
Signed-off-by: David Reaver <me@davidreaver.com>
Link: https://lore.kernel.org/r/20220625211548.1200198-1-me@davidreaver.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Do fine-grained Kconfig for all the various retbleed parts.
NOTE: if your compiler doesn't support return thunks this will
silently 'upgrade' your mitigation to IBPB, you might not like this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
scripts/clang-tools/gen_compile_commands.py incorrectly assumes that
each .mod file only contains one line. That assumption was correct when
the script was originally created, but commit 9413e7640564 ("kbuild:
split the second line of *.mod into *.usyms") changed the .mod file
format so that there is one entry per line, and potentially many lines.
The problem can be reproduced by using Kbuild to generate
compile_commands.json, like this:
make CC=clang compile_commands.json
In many cases, the problem might be overlooked because many subsystems
only have one line anyway. However, in some subsystems (Nouveau, with
762 entries, is a notable example) it results in skipping most of the
subsystem.
Fix this by fully processing each .mod file.
Fixes: 9413e7640564 ("kbuild: split the second line of *.mod into *.usyms")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since entry asm is tricky, add a validation pass that ensures the
retbleed mitigation has been done before the first actual RET
instruction.
Entry points are those that either have UNWIND_HINT_ENTRY, which acts
as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or
those that have UWIND_HINT_IRET_REGS at +0.
This is basically a variant of validate_branch() that is
intra-function and it will simply follow all branches from marked
entry points and ensures that all paths lead to ANNOTATE_UNRET_END.
If a path hits RET or an indirection the path is a fail and will be
reported.
There are 3 ANNOTATE_UNRET_END instances:
- UNTRAIN_RET itself
- exception from-kernel; this path doesn't need UNTRAIN_RET
- all early exceptions; these also don't need UNTRAIN_RET
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
|
|
Since commit f02e8a6596b7 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).
Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.
Fix the .fromsec field.
Fixes: f02e8a6596b7 ("module: Sort exported symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
|
|
Some warnings do not increment the warnings counter making the behavior
of running kernel-doc with -Werror unlogical as some warnings will be
generated but not treated as errors.
Fix this by creating a helper function that always incrementing the
warnings counter every time a warning is emitted. There is one location
in get_sphinx_version() where a warning is not touched as it concerns
the execution environment of the kernel-doc and not the documentation
being processed.
Incrementing the counter only have effect when running kernel-doc in
either verbose mode (-v or environment variable KBUILD_VERBOSE) or when
treating warnings as errors (-Werror or environment variable
KDOC_WERROR). In both cases the number of warnings printed is printed to
stderr and for the later the exit code of kernel-doc is non-zero if
warnings where encountered.
Simple test case to demo one of the warnings,
$ cat test.c
/**
* foo() - Description
*/
int bar();
# Without this change
$ ./scripts/kernel-doc -Werror -none test.c
test.c:4: warning: expecting prototype for foo(). Prototype was for
bar() instead
# With this change
$ ./scripts/kernel-doc -Werror -none test.c
test.c:4: warning: expecting prototype for foo(). Prototype was for
bar() instead
1 warnings as Errors
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Link: https://lore.kernel.org/r/20220613090510.3088294-1-niklas.soderlund@corigine.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
|
|
MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.
Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.
Fixes: 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Bash 4.4, released in 2016, supports 'wait $!' to check the exit status
of a process substitution, but it seems too new.
Some people using older bash versions (on CentOS 7, Ubuntu 16.04, etc.)
reported an error like this:
./scripts/check-local-export: line 54: wait: pid 17328 is not a child of this shell
I used the process substitution to avoid a pipeline, which executes each
command in a subshell. If the while-loop is executed in the subshell
context, variable changes within are lost after the subshell terminates.
Fortunately, Bash 4.2, released in 2011, supports the 'lastpipe' option,
which makes the last element of a pipeline run in the current shell process.
Switch to the pipeline with 'lastpipe' solution, and also set 'pipefail'
to catch errors from ${NM}.
Add the bash requirement to Documentation/process/changes.rst.
Fixes: 31cb50b5590f ("kbuild: check static EXPORT_SYMBOL* by script instead of modpost")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but
the kernel build host tools still use it. Disable the warning about
deprecated declarations until somebody who cares fixes it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
changed the format of *.mod files to put one object per line, but missed
to adjust scripts/nsdeps.
Fixes: 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In 22f26f21774f8 awk was added to deduplicate *.mod files. The awk
invocation passes -v RS='( |\n)' to match a space or newline character
as the record separator. Unfortunately, POSIX states[1]
> If RS contains more than one character, the results are unspecified.
Some implementations (such as the One True Awk[2] used by the BSDs) do
not treat RS as a regular expression. When awk does not support regex
RS, build failures such as the following are produced (first error using
allmodconfig):
CC [M] arch/x86/events/intel/uncore.o
CC [M] arch/x86/events/intel/uncore_nhmex.o
CC [M] arch/x86/events/intel/uncore_snb.o
CC [M] arch/x86/events/intel/uncore_snbep.o
CC [M] arch/x86/events/intel/uncore_discovery.o
LD [M] arch/x86/events/intel/intel-uncore.o
ld: cannot find uncore_nhmex.o: No such file or directory
ld: cannot find uncore_snb.o: No such file or directory
ld: cannot find uncore_snbep.o: No such file or directory
ld: cannot find uncore_discovery.o: No such file or directory
make[3]: *** [scripts/Makefile.build:422: arch/x86/events/intel/intel-uncore.o] Error 1
make[2]: *** [scripts/Makefile.build:487: arch/x86/events/intel] Error 2
make[1]: *** [scripts/Makefile.build:487: arch/x86/events] Error 2
make: *** [Makefile:1839: arch/x86] Error 2
To avoid this, use printf(1) to produce a newline between each object
path, instead of the space produced by echo(1), so that the default RS
can be used by awk.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/awk.html
[2]: https://github.com/onetrueawk/awk
Fixes: 22f26f21774f ("kbuild: get rid of duplication in *.mod files")
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text. This can result in
comically wrong output. For example:
$ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
enter_from_user_mode+0x1c/0x30:
find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
(inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504
Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.
Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
|
|
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
|
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
|
|
This fixes the build error when the system has a default bash version
which is too old to support associative array variables.
The build error log as fellowing:
linux/scripts/check-local-export: line 11: declare: -A: invalid option
declare: usage: declare [-afFirtx] [-p] [name[=value] ...]
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make nconfig accept jk keybindings for movement in addition to arrow
keys.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
This is a preparation for moving the objtool rule in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Change the "make clean" rule to remove all the .tmp_* files.
.tmp_objdiff is the only exception, which should be removed by
"make mrproper".
Rename the record directory of objdiff, .tmp_objdiff to .objdiff to
avoid the removal by "make clean".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
|
|
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
Pull SPDX updates from Greg KH:
"Here are some SPDX license marker changes.
The SPDX-labeling effort has started to pick up again, so here are
some changes for various parts of the tree that are related to this
effort.
Included in here are:
- freevxfs license updates
- spihash.c license cleanups
- spdxcheck script updates to make things easier to work with going
forward
All of the license updates came from the original authors/copyright
holders of the code involved.
All of these have been in linux-next for weeks with no reported
issues"
* tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
siphash: add SPDX tags as sole licensing authority
scripts/spdxcheck: Exclude top-level README
scripts/spdxcheck: Exclude MAINTAINERS/CREDITS
scripts/spdxcheck: Exclude config directories
scripts/spdxcheck: Put excluded files and directories into a separate file
scripts/spdxcheck: Add option to display files without SPDX
scripts/spdxcheck: Add [sub]directory statistics
scripts/spdxcheck: Add directory statistics
scripts/spdxcheck: Add percentage to statistics
freevxfs: relicense to GPLv2 only
|
|
Add Kbuild, Makefile, Kconfig and link script for LoongArch build
infrastructure.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ELF-related definitions for LoongArch, including: EM_LOONGARCH,
KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64
and NT_LOONGARCH_*.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes and the addition of an
SVG tux logo which, I'm assured, we're going to want"
* tag 'docs-5.19-2' of git://git.lwn.net/linux:
documentation: Format button_dev as a pointer.
docs: add SVG version of the Linux logo
docs: move Linux logo into a new `images` folder
docs: blockdev: change title to match section content
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
|
|
Having assets in the top-level `Documentation` directory can make
it harder to find the documents one needs, especially if we want
to add more of them later on.
Instead, create a new `images` folder inside it that is used
to hold assets such as logos.
In addition, update the reference in `scripts/spdxcheck-test.sh`.
Link: https://lore.kernel.org/lkml/8735hicoy7.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20220528153132.8636-1-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
These are cleaned by the top Makefile.
vmlinux.o and .vmlinux.d matches the '*.[aios]' and '.*.d' patterns
respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
When CONFIG_LTO_CLANG or CONFIG_X86_KERNEL_IBT is enabled, objtool for
multi-object modules is postponed until the objects are linked together.
Make sure to re-run objtool and re-link multi-object modules when
objtool is updated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Separate out the command execution part of if_changed, as we did
for if_changed_dep.
This allows us to reuse it in if_changed_rule.
define rule_foo
$(call cmd_and_savecmd,foo)
$(call cmd,bar)
endef
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Like built-in.a, the command length of the *.mod rule scales with
the depth of the directory times the number of objects in the Makefile.
Add $(obj)/ by the shell command (awk) instead of by Make's builtin
function.
In-tree modules still have some room to the limit (ARG_MAX=2097152),
but this is more future-proof for big modules in a deep directory.
For example, you can build i915 as a module (CONFIG_DRM_I915=m) and
compare drivers/gpu/drm/i915/.i915.mod.cmd with/without this commit.
The issue is more critical for external modules because the M= path
can be very long as Jeff Johnson reported before [1].
[1] https://lore.kernel.org/linux-kbuild/4c02050c4e95e4cb8cc04282695f8404@codeaurora.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
Kbuild runs at the top of objtree instead of changing the working
directory to subdirectories. I think this design is nice overall but
some commands have a scalability issue.
The build command of built-in.a is one of them whose length scales with:
O(D * N)
Here, D is the length of the directory path (i.e. $(obj)/ prefix),
N is the number of objects in the Makefile, O() is the big O notation.
The deeper directory the Makefile directory is located, the more easily
it will hit the too long argument error.
We can make it better. Trim the $(obj)/ by Make's builtin function, and
restore it by a shell command (sed).
With this, the command length scales with:
O(D + N)
In-tree modules still have some room to the limit (ARG_MAX=2097152),
but this is more future-proof for big modules in a deep directory.
For example, you can build i915 as builtin (CONFIG_DRM_I915=y) and
compare drivers/gpu/drm/i915/.built-in.a.cmd with/without this commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
Linus Torvalds
Masahiro Yamada
Khalid Masum
David Gow
Mauro Carvalho Chehab
David Reaver
Peter Zijlstra
John Hubbard
Sami Tolvanen
Niklas Söderlund
Kuan-Ying Lee
Kevin Locke
Josh Poimboeuf
Schspa Shi
Isak Ellmer
Huacai Chen
Miguel Ojeda