| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we think we're read-only but the VFS doesn't, fun will ensue.
And now that we know we have to be able to do this safely, just make
nochanges imply ro.
Reported-by: syzbot+a7d6ceaba099cc21dee4@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Link: https://lore.kernel.org/all/6822ab02.050a0220.f2294.00cb.GAE@google.com/T/
Reported-by: syzbot+2c3ef91c9523c3d1a25c@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_lost_data() gets called on btree node read error, but the
error might be transient.
btree_node_scan is expensive, and there's no need to run it persistently
(marking it in the superblock as required to run) - check_topology
will run it if required, via bch2_get_scanned_nodes().
Running it non-persistently is fine, to avoid check_topology having to
rewind recovery to run it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_increase_depth() was originally for disaster recovery, to get
some data back from the journal when a btree root was bad.
We don't need it for that purpose anymore; on bad btree root we'll
launch btree node scan and reconstruct all the interior nodes.
If there's a key in the journal for a depth that doesn't exists, and
it's not from check_topology/btree node scan, we should just ignore it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Invalidate pagecache after we write the new superblock and send a
uevent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It seems excessive forced btree node rewrites can cause interior btree
updates to become wedged during recovery, before we're using the write
buffer for backpointer updates.
Add more flags so we can determine where these are coming from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a deadlock during recovery where interior btree updates became
wedged and all open_buckets were consumed; start adding more
introspection.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Log the specific error being corrected in the journal when we're
repairing, this helps greatly with 'bcachefs list_journal' analysis.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch will add logging of the specific error being corrected in
repair paths to the journal; this means __bch2_fsck_err() can return
transaction restarts in places that previously weren't expecting them.
check_topology() is old code that doesn't use btree iterators for btree
node locking - it'll have to be rewritten in the future to work online.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds abstraction for representing a CPU identifier.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Specify the properties which are essential and which are not for the
Tegra I2C driver to function correctly. This was not added correctly when
the TXT binding was converted to yaml. All the existing DT nodes have
these properties already and hence this does not break the ABI.
dmas and dma-names which were specified as a must in the TXT binding
is now made optional since the driver can work in PIO mode if dmas are
missing.
Fixes: f10a9b722f80 ("dt-bindings: i2c: tegra: Convert to json-schema”)
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi@smida.it>
Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com
|
|
I left Amazon and joined Google, so let's map the email
addresses accordingly.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250610235734.88540-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:
BUG: kernel NULL pointer dereference, address: 0000000000000000
ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
ipv6_rcv (net/ipv6/ip6_input.c:306:8)
process_backlog (net/core/dev.c:6186:4)
napi_poll (net/core/dev.c:6906:9)
net_rx_action (net/core/dev.c:7028:13)
do_softirq (kernel/softirq.c:462:3)
netif_rx (net/core/dev.c:5326:3)
dev_loopback_xmit (net/core/dev.c:4015:2)
ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
NF_HOOK (./include/linux/netfilter.h:314:9)
ip_mc_output (net/ipv4/ip_output.c:400:5)
dst_output (./include/net/dst.h:459:9)
ip_local_out (net/ipv4/ip_output.c:130:9)
ip_send_skb (net/ipv4/ip_output.c:1496:8)
udp_send_skb (net/ipv4/udp.c:1040:8)
udp_sendmsg (net/ipv4/udp.c:1328:10)
The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.
Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata.
Cc: stable@vger.kernel.org
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d219df60a70e ("bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()")
Fixes: 1b00e0dfe7d0 ("bpf: update skb->protocol in bpf_skb_net_grow")
Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make pte_swp_exclusive return bool instead of int. This will better
reflect how pte_swp_exclusive is actually used in the code.
This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not
returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper
32-bits of PTE (like on alpha).
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/
Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/
[ Applied as the 'sed' script Al suggested - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the link is up, either eth_proto_oper or ext_eth_proto_oper
typically reports the active link protocol, from which both speed
and number of lanes can be retrieved. However, in certain cases,
such as when a NIC is connected via a non-standard cable, the
firmware may not report the protocol.
In such scenarios, the speed can still be obtained from the
data_rate_oper field in PTYS register. Since data_rate_oper
provides only speed information and lacks lane details, it is
incorrect to derive the number of lanes from it.
This patch corrects the behavior by setting the number of lanes to
UNKNOWN instead of incorrectly using MAX_LANES when relying on
data_rate_oper.
Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When there are more than one destinations, we create a FW flow
table and provide it with all the destinations. FW requires to
have wire as the last destination in the list (if it exists),
otherwise the operation fails with FW syndrome.
This patch fixes the destination array action creation: if it
contains a wire destination, it is moved to the end.
Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix missing field handling in definer - outer IP version.
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The newly introduced mutex is only used for reformat actions, but it was
initialized for modify header instead.
The struct that contains the mutex is zero-initialized and an all-zero
mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES.
Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix shutdown flow UAF when a virtual function is created on the embedded
chip (ECVF) of a BlueField device. In such case the vport acl ingress
table is not properly destroyed.
ECVF functionality is independent of ecpf_vport_exists capability and
thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not
test it when enabling/disabling ECVF vports.
kernel log:
[] refcount_t: underflow; use-after-free.
[] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28
refcount_warn_saturate+0x124/0x220
----------------
[] Call trace:
[] refcount_warn_saturate+0x124/0x220
[] tree_put_node+0x164/0x1e0 [mlx5_core]
[] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core]
[] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core]
[] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core]
[] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core]
[] esw_vport_cleanup+0x64/0x90 [mlx5_core]
[] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core]
[] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core]
[] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core]
[] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core]
[] mlx5_sriov_detach+0x40/0x50 [mlx5_core]
[] mlx5_unload+0x40/0xc4 [mlx5_core]
[] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core]
[] mlx5_unload_one+0x3c/0x60 [mlx5_core]
[] shutdown+0x7c/0xa4 [mlx5_core]
[] pci_device_shutdown+0x3c/0xa0
[] device_shutdown+0x170/0x340
[] __do_sys_reboot+0x1f4/0x2a0
[] __arm64_sys_reboot+0x2c/0x40
[] invoke_syscall+0x78/0x100
[] el0_svc_common.constprop.0+0x54/0x184
[] do_el0_svc+0x30/0xac
[] el0_svc+0x48/0x160
[] el0t_64_sync_handler+0xa4/0x12c
[] el0t_64_sync+0x1a4/0x1a8
[] --[ end trace 9c4601d68c70030e ]---
Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports")
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sched-ext@lists.linux.dev instead of LKML.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This fixes the following errors:
net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@ expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse: expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse: got restricted __le16 [usertype] monitor_handle
Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).
Fixes: 0a766a0affb5 ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Convert the PMEM device tree binding from text to YAML. This will allow
device trees with pmem-region nodes to pass dtbs_check.
[iweiny: fix ups from Rob/Drew]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250606184405.359812-4-drew@pdp7.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.
The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.
During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Once the global hash is requested there is no way back to switch back to
the per-task private hash. This is checked at the begin of the function.
It is possible that two threads simultaneously request the global hash
and both pass the initial check and block later on the
mm::futex_hash_lock. In this case the first thread performs the switch
to the global hash. The second thread will also attempt to switch to the
global hash and while doing so, accessing the nonexisting slot 1 of the
struct futex_private_hash.
The same applies if the hash is made immutable: There is no reference
counting and the hash must not be replaced.
Verify under mm_struct::futex_phash that neither the global hash nor an
immutable hash in use.
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/aDwDw9Aygqo6oAx+@ly-workstation/
Fixes: bd54df5ea7cad ("futex: Allow to resize the private local hash")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250610104400.1077266-5-bigeasy@linutronix.de/
|
|
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301faece ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document recently merged feature auto buffer registration(UBLK_F_AUTO_BUF_REG).
Cc: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611085632.109719-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It isn't necessary to freeze queue for updating disk size given submit_bio()
doesn't grab queue usage counter for checking eod.
Also many driver won't freeze queue for calling set_capacity_and_notify().
Move lo_set_size() out of queue freeze for fixing many lockdep warning
report.
Link: https://lore.kernel.org/linux-block/67ea99e0.050a0220.3c3d88.0042.GAE@google.com/
Reported-by: syzbot+9dd7dbb1a4b915dee638@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611084938.108829-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to the description of the Loongson-7A2000 ACPI GPIO register in
the manual, its access mode should be BIT_CTRL_MODE, otherwise there maybe
some unpredictable behavior.
Cc: stable@vger.kernel.org
Fixes: 44fe79020b91 ("gpio: loongson-64bit: Add more gpio chip support")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250610115926.347845-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Both ARM and IBM CI reports RCU stall, which can be reproduced by the
below perf command.
perf record -a -e cpu-clock -- sleep 2
The issue is introduced by the generic throttle patch set, which
unconditionally invoke the event_stop() when throttle is triggered.
The cpu-clock and task-clock are two special SW events, which rely on
the hrtimer. The throttle is invoked in the hrtimer handler. The
event_stop()->hrtimer_cancel() waits for the handler to finish, which is
a deadlock. Instead of invoking the stop(), the HRTIMER_NORESTART should
be used to stop the timer.
There may be two ways to fix it:
- Introduce a PMU flag to track the case. Avoid the event_stop in
perf_event_throttle() if the flag is detected.
It has been implemented in the
https://lore.kernel.org/lkml/20250528175832.2999139-1-kan.liang@linux.intel.com/
The new flag was thought to be an overkill for the issue.
- Add a check in the event_stop. Return immediately if the throttle is
invoked in the hrtimer handler. Rely on the existing HRTIMER_NORESTART
method to stop the timer.
The latter is implemented here.
Move event->hw.interrupts = MAX_INTERRUPTS before the stop(). It makes
the order the same as perf_event_unthrottle(). Except the patch, no one
checks the hw.interrupts in the stop(). There is no impact from the
order change.
When stops in the throttle, the event should not be updated,
stop(event, 0). But the cpu_clock_event_stop() doesn't handle the flag.
In logic, it's wrong. But it didn't bring any problems with the old
code, because the stop() was not invoked when handling the throttle.
Checking the flag before updating the event.
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/20250527161656.GJ2566836@e132581.arm.com/
Closes: https://lore.kernel.org/lkml/djxlh5fx326gcenwrr52ry3pk4wxmugu4jccdjysza7tlc5fef@ktp4rffawgcw/
Closes: https://lore.kernel.org/lkml/8e8f51d8-af64-4d9e-934b-c0ee9f131293@linux.ibm.com/
Closes: https://lore.kernel.org/lkml/4ce106d0-950c-aadc-0b6a-f0215cd39913@maine.edu/
Reported-by: Leo Yan <leo.yan@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20250606192546.915765-1-kan.liang@linux.intel.com
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
|
|
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date.
The proper BIOS build date was provided by Hans, see Link.
Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_request_regions() became a managed devres functions if the PCI
device was enabled with pcim_enable_device(), which is the case for
pata_macio.
The PCI subsystem recently removed this hybrid feature from
pci_request_region(). When doing so, pata_macio was forgotten to be
ported to use pcim_request_all_regions(). If that function is not used,
pata_macio will fail on driver-reload because the PCI regions will
remain blocked.
Fix the region leak by replacing pci_request_regions() with its managed
counterpart, pcim_request_all_regions().
Fixes: 51f6aec99cb0 ("PCI: Remove hybrid devres nature from request functions")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250610135413.35930-2-phasta@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
Kent Overstreet
Alan Huang
Viresh Kumar
Akhil R
Kuniyuki Iwashima
Jakub Kicinski
Magnus Lindholm
Shahar Shitrit
Jianbo Liu
Vlad Dogaru
Yevgeny Kliteynik
Patrisious Haddad
Amir Tzin
Moshe Shemesh
Tejun Heo
Luiz Augusto von Dentz
Drew Fustini
Herbert Xu
Ashish Kalra
Dan Carpenter
Sebastian Andrzej Siewior
Jens Axboe
Christoph Hellwig
Damien Le Moal
Ming Lei
Binbin Zhou
Kan Liang
Jakub Raczynski
Marek Szyprowski
Niklas Cassel
Philipp Stanner