| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In lower layer driver's (LLD) scsi_host_template, the driver may
optionally ask SCSI to allocate its private driver memory for each
command, by specifying cmd_size. This memory is allocated at the end of
scsi_cmnd by SCSI. Later when SCSI queues a command, the LLD can use
scsi_cmd_priv to get to its private data.
Some LLD, e.g. hv_storvsc, doesn't clear its private data before use. In
this case, the LLD may get to stale or uninitialized data in its private
driver memory. This may result in unexpected driver and hardware
behavior.
Fix this problem by also zeroing the private driver memory before
passing them to LLD.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: KY Srinivasan <kys@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
CC: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
mbp pointer is passed to csio_hw_validate_caps() so call mempool_free()
after calling csio_hw_validate_caps().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Fixes: 541c571fa2fd ("csiostor:Use firmware version from cxgb4/t4fw_version.h")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When reloading module these two attributes aren't cleaned up properly
and they persist causing warnings when trying to load module
again. Additionally they are not recreated properly due to that.
Signed-off-by: Michał Potomski <michalx.potomski@intel.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
fix build issue if NVME_FC_TARGET is not defined. noop the code. The
code will never be invoked if target mode is not enabled.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Recent commit on patchset "lpfc updates for 11.2.0.14" fixed an issue
about dereferencing a NULL pointer on port reset. The specific commit,
named "lpfc: Fix system crash when port is reset.", is missing a check
against NULL pointer on lpfc_els_flush_cmd() though.
Since we destroy the queues on adapter resets, like in PCI error
recovery path, we need the validation present on this patch in order to
avoid a NULL pointer dereference when trying to flush commands of ELS
wq, after it has been destroyed (which would lead to a kernel oops).
Tested-by: Raphael Silva <raphasil@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change driver version to 11.2.0.14.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Added code to support Cisco MDS loopback diagnostic. The diagnostics run
various loopbacks including one which loops-back frame through the
driver.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Code review of NVMEI's FC_PORT_ROLE_NVME_DISCOVERY looked wrong.
Discussions with storage architecture team clarified NVMEI's audit of
the PRLI response port roles. Following up discussion with code review
showed a few minor corrections were required - especially in
anticipation of NVME auto discovery.
During PRLI, NVMEI should sent prli_init - which it it does. NVMET
should send prli_tgt and prli_disc - which it does. When NVMEI receives
a PRLI Response now, it audits the incoming target bits and stores the
attributes in the corresponding NDLP. Later, when NVMEI registers the
NVME rport, it uses the stored ndlp attributes to set the rport
port_roles correctly.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Too many work items being processed in IRQ context take a lot of CPU
time and cause problems.
With a recent change, we get out of the ISR after hitting entry_repost
work items on a queue. However, the actual values for entry repost are
still high. EQ is 128 and CQ is 128, this could translate into
processing 128 * 128 (16384) work items under IRQ context.
Set entry_repost in the actual queue creation routine now. Limit EQ
repost to 8 and CQ repost to 64 to further limit the amount of time
spent in the IRQ.
Fix fof IRQ routines as well.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When unloading and reloading the driver, the driver fails to recreate
the lpfc root inode in the debugfs tree.
The driver is incorrectly removing the lpfc root inode in
lpfc_debugfs_terminate in the first driver instance that unloads and
then sets the lpfc_debugfs_root global parameter to NULL. When the
final driver instance unloads, the debugfs calls quietly ignore the
remove on a NULL pointer. The bug is that the debugfs_remove call
returns void so the driver doesn't know to correctly set the global
parameter to NULL.
Base the debugfs_remove of the lpfc_debugfs_root parameter on
lpfc_debugfs_hba_count because this parameter tracks the fnX instance
tracked per driver instance.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the driver send the RPA command, it does not send supported FC4
Type NVME to the management server.
Encode NVME (type x28) in the AttribEntry in the RPA command.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous logic would just drop the IO.
Added logic to queue the IO to wait for an IO context resource from an
IO thats already in progress.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently IO resources are mapped 1 to 1 with RQ buffers posted
Added logic to separate RQE buffers from IO op resources
(sgl/iocbq/context). During initialization, the driver will determine
how many SGLs it will allocate for NVMET (based on what the firmware
reports) and associate a NVMET IOCBq and NVMET context structure with
each one.
Now that hdr/data buffers are immediately reposted back to the RQ, 512
RQEs for each MRQ is sufficient. Also, since NVMET data buffers are now
128 bytes, lpfc_nvmet_mrq_post is not necessary anymore as we will
always post the max (512) buffers per NVMET MRQ.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Using 2048 byte buffer and onle 128 bytes is needed.
Create nee LFPC_NVMET_DATA_BUF_SIZE define to use for NVMET RQ/MRQs.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After running IOPS test for 30 second we get kernel:NMI watchdog:
Watchdog detected hard LOCKUP on cpu 0
The driver is speend too much time in its ISR.
In ISR EQ and CQ processing routines, if we hit the entry_repost numbers
of EQE/CQEs just break out of the routine as opposed to hitting the
doorbell with NOARM and continue processing.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During driver boot, a latency in the NVMET driver side causes the
incoming NVMEI PRLI to get rejected by the NVMET driver. When this
happens, the NVMEI driver runs out of PRLI retries. Bouncing the link
does not fix the situation.
If the NVMEI driver decides, on PRLI completion failures, to retry the
PRLI, always decrement the fc4_prli_sent counter. This allows the PRLI
completion to resolve to UNMAPPED when NVMET rejects the PRLI.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Large block writes to the nvme target were failing because the default
number of RQs posted was insufficient.
Expand the NVMET RQs to 2048 RQEs and ensure a minimum of 512 RQEs are
posted, no matter how many MRQs are configured.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
More debug messages added for nvme statistics.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver panic when using the els_wq during port reset.
Check for NULL els_wq before dereferencing.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With 255 vports created a link trasition can casue a crash.
When going through discovery after a link bounce the driver is using
rpis before the cmd FCOE_POST_HDR_TEMPLATES completes. By doing that the
next rpi bumps the rpi range out of the boundary.
The fix it to increment the next_rpi only when the
FCOE_POST_HDR_TEMPLATE succeeds.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous assignment was causing the use of the uninitialized variable
_explan_ inside fc_seq_ls_rjt() function, which in this particular case
is being called by fc_seq_els_rsp_send().
[mkp: fixed typo]
Addresses-Coverity-ID: 1398125
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some external hard drives don't support the sync command even though the
hard drive has write cache enabled. In this case, upon suspend request,
sync cache failures are ignored if the error code in the sense header is
ILLEGAL_REQUEST. There's not much we can do for these drives, so we
shouldn't fail to suspend for this error case. The drive may stay
powered if that's the setup for the port it's plugged into.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the list search in sg_get_rq_mark() fails to find a valid request, we
return a bogus element. This then can later lead to a GPF in
sg_remove_scat().
So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case
the list search doesn't find a valid request.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For a zoned block device, sd_zbc_complete() handles zone write unlock on
completion of a REQ_OP_WRITE_ZEROES command but the zone write locking
is missing from sd_setup_write_zeroes_cmnd(). This patch fixes this
problem by locking the target zone of a REQ_OP_WRITE_ZEROES request.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_io_init() may fail, leaving a zone of a zoned block device locked.
Fix this by properly unlocking the write same request target zone if
scsi_io_init() fails.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 2nd check to see if request_size is less than zero is redundant
because the first check takes error exit path on this condition. So,
since it is redundant, remove it.
Detected by CoverityScan, CID#146149 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I believe there is a typo on the wq destroy of els_wq, currently the
driver is checking if els_cq is not null and I think this should be a
check on els_wq instead.
Detected by CoverityScan, CID#1411629 ("Copy-paste error")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver now uses IRQ_POLL and needs to select it to avoid the
following build error.
ERROR: ".irq_poll_complete" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_sched" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_disable" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
ERROR: ".irq_poll_init" [drivers/scsi/cxlflash/cxlflash.ko] undefined!
Fixes: cba06e6de403 ("scsi: cxlflash: Implement IRQ polling for RRQ processing")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Using memcpy() from a string that is shorter than the length copied
means the destination buffer is being filled with arbitrary data from
the kernel rodata segment. Instead, use strncpy() which will fill the
trailing bytes with zeros.
This was found with the future CONFIG_FORTIFY_SOURCE feature.
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We store sc_cmd->cmnd[0] which is an unsigned char in io_log->op so
this should also be unsigned char. The other thing is that this is
displayed in the debugfs:
seq_printf(s, "0x%02x:", io_log->op);
Smatch complains that the formatting won't work for negative values so
changing it to unsigned silences that warning as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a double lock bug here so this will deadlock instead of
unlocking.
Fixes: 1c5b12f76301 ("Fix implicit logo and RSCN handling for NVMET")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Properly update the position of the arguments in function call.
Addresses-Coverity-ID: 1402010
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch avoids that when building with W=1 the compiler complains
that __scsi_init_queue() has not been declared. See also commit
d48777a633d6 ("scsi: remove __scsi_alloc_queue").
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The open-osd domain doesn't exist anymore, and mails to the list lead to
really annoying bounced that repeat every day.
Also the primarydata address for Benny bounces, and while I have a new
one for him he doesn't seem to be maintaining the OSD code any more.
Which beggs the question: should we really leave the Supported status in
MAINTAINERS given that the code is barely maintained?
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Acked-by: Benny Halevy <bhalevy@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a device is unplugged from a SCSI controller, if the scsi_device is
still in use by application layer, it won't get released until users
close it.
In this case, scsi_device_remove just set the scsi_device's state to be
SDEV_DEL. But if you plug the disk just before the old scsi_device is
released, then there will be two scsi_device structures in
scsi_host->__devices. When the next unplug event happens, some low-level
drivers will check whether the scsi_device has been added to host (for
example the MegaRAID SAS series controller) by calling
scsi_device_lookup(call __scsi_device_lookup) in function
megasas_aen_polling. __scsi_device_lookup will return the first
scsi_device. Because its state is SDEV_DEL, the scsi_device_lookup will
return NULL, making the low-level driver assume that the scsi_device has
been removed, and won't call scsi_device_remove which will lead to hot
swap failure.
Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com>
Tested-by: Zeng Rujia <ZengRujia@sangfor.com.cn>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195607
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To select the appropriate shost template, the driver is issuing a
mailbox command to retrieve the wwn. Turns out the sending of the
command precedes the reset of the function. On SLI-4 adapters, this is
inconsequential as the mailbox command location is specified by dma via
the BMBX register. However, on SLI-3 adapters, the location of the
mailbox command submission area changes. When the function is first
powered on or reset, the cmd is submitted via PCI bar memory. Later the
driver changes the function config to use host memory and DMA. The
request to start a mailbox command is the same, a simple doorbell write,
regardless of submission area. So.. if there has not been a boot driver
run against the adapter, the mailbox command works as defaults are
ok. But, if the boot driver has configured the card and, and if no
platform pci function/slot reset occurs as the os starts, the mailbox
command will fail. The SLI-3 device will use the stale boot driver dma
location. This can cause PCI eeh errors.
Fix is to reset the sli-3 function before sending the mailbox command,
thus synchronizing the function/driver on mailbox location.
Note: The fix uses routines that are typically invoked later in the call
flow to reset the sli-3 device. The issue in using those routines is
that the normal (non-fix) flow does additional initialization, namely
the allocation of the pport structure. So, rather than significantly
reworking the initialization flow so that the pport is alloc'd first,
pointer checks are added to work around it. Checks are limited to the
routines invoked by a sli-3 adapter (s3 routines) as this fix/early call
is only invoked on a sli3 adapter. Nothing changes post the
fix. Subsequent initialization, and another adapter reset, still occur -
both on sli-3 and sli-4 adapters.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Fixes: 96418b5e2c88 ("scsi: lpfc: Fix eh_deadline setting for sli3 adapters.")
Cc: stable@vger.kernel.org # v4.11+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the FCoE sending side becomes congested libfc tries to reduce the
queue depth on the host; however due to the built-in lag before
attempting to ramp down the queue depth _again_ the message log is
flooded with the following message:
libfc: queue full, reducing can_queue to 512
With this patch the message is printed only once (ie when it's
actually changed).
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81")
changes one entry of GNU make version in the changes.rst, there's still
one more entry saying that one need version 3.80. Fix that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that kref is using the refcount apis, the _GPL markings are getting
exported to places that it previously wasn't. Now kref.h is GPLv2
licensed, so any non-GPL code using it better be talking to some
lawyers, but changing api markings isn't considered "nice", so let's fix
this up.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since 2014, you can't successfully build kernels with GNU Make version
3.80. Example errors:
$ git describe
v4.11
$ make --version | head -1
GNU Make 3.80
$ make defconfig
HOSTCC scripts/basic/fixdep
scripts/Makefile.host:135: *** missing separator. Stop.
make: *** [defconfig] Error 2
$ make ARCH=arm64 help
arch/arm64/Makefile:43: *** unterminated call to function `warning': missing `)'. Stop.
$ make help >/dev/null
./Documentation/Makefile.sphinx:25: Extraneous text after `else' directive
./Documentation/Makefile.sphinx:31: *** only one `else' per conditional. Stop.
make: *** [help] Error 2
The first breakage was introduced by commit c8589d1e9e01 ("kbuild:
handle multi-objs dependency appropriately"). Since then (i.e. v3.18),
GNU Make 3.80 has not been able to compile the kernel, but nobody has
ever complained aboutt (or noticed) it.
Even GNU Make 3.81 is more than 10 years old. It would not hurt to
match the documentation with reality instead of fixing makefiles.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 17a9be317475 ("initramfs: Always do fput() and load modules after
rootfs populate") introduced an error for the
CONFIG_BLK_DEV_RAM=y
case, because even though the code looks fine, the compiler really wants
a statement after a label, or you'll get complaints:
init/initramfs.c: In function 'populate_rootfs':
init/initramfs.c:644:2: error: label at end of compound statement
That commit moved the subsequent statements to outside the compound
statement, leaving the label without any associated statements.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Fixes: 17a9be317475 ("initramfs: Always do fput() and load modules after rootfs populate")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: stable@vger.kernel.org # if 17a9be317475 gets backported
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This bug fixes a regression introduced by patch 0d1c7ae9d8.
The intent of the patch was to stop promoting glocks after a
file system is withdrawn due to a variety of errors, because doing
so results in a BUG(). (You should be able to unmount after a
withdraw rather than having the kernel panic.)
Unfortunately, it also stopped demotions, so glocks could not be
unlocked after withdraw, which means the unmount would hang.
This patch allows function do_xmote to demote locks to an
unlocked state after a withdraw, but not promote them.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Commit 28b783e47ad7 ("xfs: bufferhead chains are invalid after
end_page_writeback") fixed one use-after-free issue by
pre-calculating the loop conditionals before calling bh->b_end_io()
in the end_io processing loop, but it assigned 'next' pointer before
checking end offset boundary & breaking the loop, at which point the
bh might be freed already, and caused use-after-free.
This is caught by KASAN when running fstests generic/127 on sub-page
block size XFS.
[ 2517.244502] run fstests generic/127 at 2017-04-27 07:30:50
[ 2747.868840] ==================================================================
[ 2747.876949] BUG: KASAN: use-after-free in xfs_destroy_ioend+0x3d3/0x4e0 [xfs] at addr ffff8801395ae698
...
[ 2747.918245] Call Trace:
[ 2747.920975] dump_stack+0x63/0x84
[ 2747.924673] kasan_object_err+0x21/0x70
[ 2747.928950] kasan_report+0x271/0x530
[ 2747.933064] ? xfs_destroy_ioend+0x3d3/0x4e0 [xfs]
[ 2747.938409] ? end_page_writeback+0xce/0x110
[ 2747.943171] __asan_report_load8_noabort+0x19/0x20
[ 2747.948545] xfs_destroy_ioend+0x3d3/0x4e0 [xfs]
[ 2747.953724] xfs_end_io+0x1af/0x2b0 [xfs]
[ 2747.958197] process_one_work+0x5ff/0x1000
[ 2747.962766] worker_thread+0xe4/0x10e0
[ 2747.966946] kthread+0x2d3/0x3d0
[ 2747.970546] ? process_one_work+0x1000/0x1000
[ 2747.975405] ? kthread_create_on_node+0xc0/0xc0
[ 2747.980457] ? syscall_return_slowpath+0xe6/0x140
[ 2747.985706] ? do_page_fault+0x30/0x80
[ 2747.989887] ret_from_fork+0x2c/0x40
[ 2747.993874] Object at ffff8801395ae690, in cache buffer_head size: 104
[ 2748.001155] Allocated:
[ 2748.003782] PID = 8327
[ 2748.006411] save_stack_trace+0x1b/0x20
[ 2748.010688] save_stack+0x46/0xd0
[ 2748.014383] kasan_kmalloc+0xad/0xe0
[ 2748.018370] kasan_slab_alloc+0x12/0x20
[ 2748.022648] kmem_cache_alloc+0xb8/0x1b0
[ 2748.027024] alloc_buffer_head+0x22/0xc0
[ 2748.031399] alloc_page_buffers+0xd1/0x250
[ 2748.035968] create_empty_buffers+0x30/0x410
[ 2748.040730] create_page_buffers+0x120/0x1b0
[ 2748.045493] __block_write_begin_int+0x17a/0x1800
[ 2748.050740] iomap_write_begin+0x100/0x2f0
[ 2748.055308] iomap_zero_range_actor+0x253/0x5c0
[ 2748.060362] iomap_apply+0x157/0x270
[ 2748.064347] iomap_zero_range+0x5a/0x80
[ 2748.068624] iomap_truncate_page+0x6b/0xa0
[ 2748.073227] xfs_setattr_size+0x1f7/0xa10 [xfs]
[ 2748.078312] xfs_vn_setattr_size+0x68/0x140 [xfs]
[ 2748.083589] xfs_file_fallocate+0x4ac/0x820 [xfs]
[ 2748.088838] vfs_fallocate+0x2cf/0x780
[ 2748.093021] SyS_fallocate+0x48/0x80
[ 2748.097006] do_syscall_64+0x18a/0x430
[ 2748.101186] return_from_SYSCALL_64+0x0/0x6a
[ 2748.105948] Freed:
[ 2748.108189] PID = 8327
[ 2748.110816] save_stack_trace+0x1b/0x20
[ 2748.115093] save_stack+0x46/0xd0
[ 2748.118788] kasan_slab_free+0x73/0xc0
[ 2748.122969] kmem_cache_free+0x7a/0x200
[ 2748.127247] free_buffer_head+0x41/0x80
[ 2748.131524] try_to_free_buffers+0x178/0x250
[ 2748.136316] xfs_vm_releasepage+0x2e9/0x3d0 [xfs]
[ 2748.141563] try_to_release_page+0x100/0x180
[ 2748.146325] invalidate_inode_pages2_range+0x7da/0xcf0
[ 2748.152087] xfs_shift_file_space+0x37d/0x6e0 [xfs]
[ 2748.157557] xfs_collapse_file_space+0x49/0x120 [xfs]
[ 2748.163223] xfs_file_fallocate+0x2a7/0x820 [xfs]
[ 2748.168462] vfs_fallocate+0x2cf/0x780
[ 2748.172642] SyS_fallocate+0x48/0x80
[ 2748.176629] do_syscall_64+0x18a/0x430
[ 2748.180810] return_from_SYSCALL_64+0x0/0x6a
Fixed it by checking on offset against end & breaking out first,
dereference bh only if there're still bufferheads to process.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Otherwise it is possible to trigger crashes due to the metadata being
inaccessible yet these methods don't safely account for that possibility
without these checks.
Cc: stable@vger.kernel.org
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
SFM is mapping doublequote to 0xF020
Without this patch creating files with doublequote fails to Windows/Mac
Signed-off-by: Bjoern Jacke <bjacke@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: stable <stable@vger.kernel.org>
|
|
While honouring the DMA_ATTR_FORCE_CONTIGUOUS on arm64 (commit
44176bb38fa4: "arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to
IOMMU"), the existing uses of dma_mmap_attrs() and dma_get_sgtable()
have been broken by passing a physically contiguous vm_struct with an
invalid pages pointer through the common iommu API.
Since the coherent allocation with DMA_ATTR_FORCE_CONTIGUOUS uses CMA,
this patch simply reuses the existing swiotlb logic for mmap and
get_sgtable.
Note that the current implementation of get_sgtable (both swiotlb and
iommu) is broken if dma_declare_coherent_memory() is used since such
memory does not have a corresponding struct page. To be addressed in a
subsequent patch.
Fixes: 44176bb38fa4 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
based on commit b3b42c0deaa1
("fs/affs: make export work with cold dcache")
This adds get_parent function so that nfs client can still work after
cache drop (Tested on NFS v4 with echo 3 > /proc/sys/vm/drop_caches)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
|
|
According to the SDM, if the "activate secondary controls" primary
processor-based VM-execution control is 0, no checks are performed on
the secondary processor-based VM-execution controls.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In OpenRISC we do not have a bootloader passed initrd, but the built in
initramfs does contain the /init and other binaries, including modules.
The previous commit 08865514805d2 ("initramfs: finish fput() before
accessing any binary from initramfs") made a change to only call fput()
if the bootloader initrd was available, this caused intermittent crashes
for OpenRISC.
This patch changes the fput() to happen unconditionally if any rootfs is
loaded. Also, I added some comments to make it a bit more clear why we
call unpack_to_rootfs() multiple times.
Fixes: 08865514805d2 ("initramfs: finish fput() before accessing any binary from initramfs")
Cc: stable@vger.kernel.org
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Fix failures to create namespaces due to the vmem_altmap not advertising
enough free space to store the memmap.
WARNING: CPU: 15 PID: 8022 at arch/x86/mm/init_64.c:656 arch_add_memory+0xde/0xf0
[..]
Call Trace:
dump_stack+0x63/0x83
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
arch_add_memory+0xde/0xf0
devm_memremap_pages+0x244/0x440
pmem_attach_disk+0x37e/0x490 [nd_pmem]
nd_pmem_probe+0x7e/0xa0 [nd_pmem]
nvdimm_bus_probe+0x71/0x120 [libnvdimm]
driver_probe_device+0x2bb/0x460
bind_store+0x114/0x160
drv_attr_store+0x25/0x30
In commit 658922e57b84 "libnvdimm, pfn: fix memmap reservation sizing"
we arranged for the capacity to be allocated, but failed to also update
the 'npfns' parameter. This leads to cases where there is enough
capacity reserved to hold all the allocated sections, but
vmemmap_populate_hugepages() still encounters -ENOMEM from
altmap_alloc_block_buf().
This fix is a stop-gap until we can teach the core memory hotplug
implementation to permit sub-section hotplug.
Cc: <stable@vger.kernel.org>
Fixes: 658922e57b84 ("libnvdimm, pfn: fix memmap reservation sizing")
Reported-by: Anisha Allada <anisha.allada@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
Long Li
Varun Prakash
Michał Potomski
James Smart
Guilherme G. Piccoli
Gustavo A. R. Silva
Derek Basehore
Johannes Thumshirn
Damien Le Moal
Colin Ian King
Guenter Roeck
Kees Cook
Dan Carpenter
Bart Van Assche
Christoph Hellwig
Zhou Zhengping
Hannes Reinecke
Max Filippov
Greg Kroah-Hartman
Masahiro Yamada
Linus Torvalds
Bob Peterson
Eryu Guan
Mike Snitzer
Björn Jacke
Catalin Marinas
Fabian Frederick
Jim Mattson
Stafford Horne
Dan Williams