aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-13usb/early: Remove trace_printk() callers in xhci-dbcLu Baolu1-1/+0
Trace_printk() was used to log debug messages in xhci-dbc.c where printk() isn't feasible. As there should not be a single caller to trace_printk() in normal kernels, replace them with empty functions. Cc: Vlastimil Babka <vbabka.lkml@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: mtu3: Handle return value of clk_prepare_enableArvind Yadav1-3/+20
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Clean up the code by adding a new macroYuyang Du2-6/+9
Each vhci has 2*VHCI_HC_PORTS ports, in which VHCI_HC_PORTS ports are HighSpeed (or below), and VHCI_HC_PORTS are SuperSpeed. This new macro VHCI_PORTS reflects this configuration. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Add USB3 port status bitsYuyang Du1-6/+50
As USB3 has (slightly) different bit meanings in the port status. Add a new status bit array for USB3. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: Add USB_SPEED_SUPER as valid argYuyang Du1-0/+1
With this patch, USB_SPEED_SUPER is a valid speed when attaching a USB3 SuperSpeed device. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Add USB3 SuperSpeed supportYuyang Du6-103/+370
This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Set the vhci structure up to workYuyang Du4-105/+145
This patch enables the new vhci structure. Its lock protects both the USB2 hub and the shared USB3 hub. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Rework vhci_hcd_initYuyang Du3-24/+30
A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Move VHCI platform device into vhci structYuyang Du3-13/+13
Every VHCI is a platform device, so move the platform_device struct into the VHCI struct. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Add vhci structYuyang Du1-1/+11
In order to support SuperSpeed devices, a USB3 HCD is added to share the USB2 HCD. As a result, a VHCI is composed of two vhci_hcds associated with the two HCDs respectively. So we add another level of abstraction, vhci, and thus this vhci structure. Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Rename function names to reflect their struct namesYuyang Du4-32/+31
These helper function names are renamed to have their full struct names to avoid confusion: - hcd_to_vhci() -> hcd_to_vhci_hcd() - vhci_to_hcd() -> vhci_hcd_to_hcd() - vdev_to_vhci() -> vdev_to_vhci_hcd() Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: host: ehci-exynos: Handle return value of clk_prepare_enableArvind Yadav1-1/+3
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: Fix typo in the definition of Endpoint[out]RequestBenjamin Herrenschmidt1-2/+2
The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix parse_status()Yuyang Du2-23/+17
In parse_status(), all nports number of idev's are initiated to 0 by memset(), it is simply wrong, because parse_status() reads the status sys file one by one, therefore, it can only update the according vhci_driver->idev's for it to parse. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix refresh_imported_device_list()Yuyang Du1-6/+21
The commit 0775a9cbc694e8c7 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, but the status of the ports are only extracted from the first status file, fix it. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Add ncontrollers in vhci_driver structureYuyang Du2-0/+37
A new field ncontrollers is added to the vhci_driver structure. And this field is stored by scanning the vhci_hcd* dirs in the platform udev. Suggested-and-reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Check the return of get_nports()Yuyang Du1-1/+8
If we get nonpositive number of ports, there is no sense to continue, then fail gracefully. In addition, the commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced configurable numbers of controllers and ports, but we have a static port number maximum, MAXNPORT. If exceeded, the idev array will be overflown. We fix it by validating the nports to make sure the port number max is not exceeded. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip: set buffer pointers to NULL after freeMichael Grzeschik2-0/+8
The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Cc: stable@vger.kernel.org Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13USB: add usbfs ioctl to retrieve the connection speedAlan Stern2-0/+9
The usbfs interface does not provide any way for the user to learn the speed at which a device is connected. The current API includes a USBDEVFS_CONNECTINFO ioctl, but all it provides is the device's address and a one-bit value indicating whether the connection is low speed. That may have sufficed in the era of USB-1.1, but it isn't good enough today. This patch introduces a new ioctl, USBDEVFS_GET_SPEED, which returns a numeric value indicating the speed of the connection: unknown, low, full, high, wireless, super, or super-plus. Similar information (not exactly the same) is available through sysfs, but it seems reasonable to provide the actual value in usbfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Reinhard Huck <reinhard.huck@thesycon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-11Linux 4.12-rc5Linus Torvalds1-1/+1
2017-06-11compiler, clang: properly override 'inline' for clangLinus Torvalds1-1/+2
Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-11KVM: async_pf: avoid async pf injection when in guest modeWanpeng Li3-4/+7
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds. Not tainted 4.12.0-rc4+ #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. gnome-terminal- D 0 1734 1015 0x00000000 Call Trace: __schedule+0x3cd/0xb30 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? __vfs_read+0x37/0x150 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 This is triggered by running both win7 and win2016 on L1 KVM simultaneously, and then gives stress to memory on L1, I can observed this hang on L1 when at least ~70% swap area is occupied on L0. This is due to async pf was injected to L2 which should be injected to L1, L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host actually), and L1 guest starts accumulating tasks stuck in D state in kvm_async_pf_task_wait() since missing PAGE_READY async_pfs. This patch fixes the hang by doing async pf when executing L1 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-10hexagon: Use raw_copy_to_userGuenter Roeck1-3/+2
Commit ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced __copy_to_user_hexagon() with raw_copy_to_user(), but did not catch all callers, resulting in the following build error. arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon': arch/hexagon/mm/uaccess.c:40:3: error: implicit declaration of function '__copy_to_user_hexagon' Fixes: ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-10ufs: we need to sync inode before freeing itAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09excessive checks in ufs_write_failed() and ufs_evict_inode()Al Viro1-13/+5
As it is, short copy in write() to append-only file will fail to truncate the excessive allocated blocks. As the matter of fact, all checks in ufs_truncate_blocks() are either redundant or wrong for that caller. As for the only other caller (ufs_evict_inode()), we only need the file type checks there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs_getfrag_block(): we only grab ->truncate_mutex on block creation pathAl Viro1-1/+3
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()Al Viro1-1/+2
... and it really needs splitting into "new" and "extend" cases, but that's for later Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: set correct ->s_maxsizeAl Viro1-0/+18
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: restore maintaining ->i_blocksAl Viro2-1/+26
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09fix ufs_isblockset()Al Viro1-3/+7
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: restore proper tail allocationAl Viro1-1/+1
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09Btrfs: fix delalloc accounting leak caused by u32 overflowOmar Sandoval1-2/+2
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication, which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2). For a nodesize of 16kB, this overflow happens at 16k items. Usually, num_items is a small constant passed to btrfs_start_transaction(), but we also use btrfs_calc_trans_metadata_size() for metadata reservations for extent items in btrfs_delalloc_{reserve,release}_metadata(). In drop_outstanding_extents(), num_items is calculated as inode->reserved_extents - inode->outstanding_extents. The difference between these two counters is usually small, but if many delalloc extents are reserved and then the outstanding extents are merged in btrfs_merge_extent_hook(), the difference can become large enough to overflow in btrfs_calc_trans_metadata_size(). The overflow manifests itself as a leak of a multiple of 4 GB in delalloc_block_rsv and the metadata bytes_may_use counter. This in turn can cause early ENOSPC errors. Additionally, these WARN_ONs in extent-tree.c will be hit when unmounting: WARN_ON(fs_info->delalloc_block_rsv.size > 0); WARN_ON(fs_info->delalloc_block_rsv.reserved > 0); WARN_ON(space_info->bytes_pinned > 0 || space_info->bytes_reserved > 0 || space_info->bytes_may_use > 0); Fix it by casting nodesize to a u64 so that btrfs_calc_trans_metadata_size() does a full 64-bit multiplication. While we're here, do the same in btrfs_calc_trunc_metadata_size(); this can't overflow with any existing uses, but it's better to be safe here than have another hard-to-debug problem later on. Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_ioLiu Bo1-1/+1
Before this, we use 'filled' mode here, ie. if all range has been filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG bits in extent_state until releasing this inode's pages, and that prevents extent_data from being freed. This clears the bit if any was found within the ordered extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09btrfs: tree-log.c: Wrong printk information about namelenSu Yue1-1/+1
In verify_dir_item, it wants to printk name_len of dir_item but printk data_len acutally. Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len. Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09Input: synaptics-rmi4 - register F03 port as pass-through serioDmitry Torokhov1-1/+1
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS driver to detect whether it is dealing with touchpad + trackpoint combination or just a trackpoint, so we end up with a "phantom" dualpoint ALPS device in addition to real touchpad and trackpoint. Given that we do not have any special advanced handling for ALPS or Elantech trackpoints (unlike IBM trackpoints that have separate driver and a host of options) we are better off keeping the trackpoints in PS/2 emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU, which will limit number of protocols psmouse driver will try. In addition to getting rid of the "phantom" touchpads, this will also speed up probing of F03 pass-through port. Reported-by: Damjan Georgievski <gdamjan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-09device-dax: fix 'dax' device filesystem inode destruction crashDan Williams1-2/+7
The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09efi: Fix boot panic because of invalid BGRT image addressDave Young1-1/+25
Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09cxl: Avoid double free_irq() for psl,slice interruptsVaibhav Jain1-3/+11
During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud1-0/+7
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud1-1/+1
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09KEYS: fix refcount_inc() on zeroMark Rutland1-7/+4
If a key's refcount is dropped to zero between key_lookup() peeking at the refcount and subsequently attempting to increment it, refcount_inc() will see a zero refcount. Here, refcount_inc() will WARN_ONCE(), and will *not* increment the refcount, which will remain zero. Once key_lookup() drops key_serial_lock, it is possible for the key to be freed behind our back. This patch uses refcount_inc_not_zero() to perform the peek and increment atomically. Fixes: fff292914d3a2f1e ("security, keys: convert key.usage from atomic_t to refcount_t") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP APIMat Martineau2-103/+171
The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09crypto : asymmetric_keys : verify_pefile:zero memory content before freeingLoganaden Velvindron1-2/+2
Signed-off-by: Loganaden Velvindron <logan@hackers.mu> Signed-off-by: Yasir Auleear <yasirmx@hackers.mu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: add __user annotations to keyctl_kdf_paramsEric Biggers1-2/+2
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: ensure the KDF counter is properly alignedEric Biggers1-13/+3
Accessing a 'u8[4]' through a '__be32 *' violates alignment rules. Just make the counter a __be32 instead. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: don't feed uninitialized "otherinfo" into KDFEric Biggers1-1/+1
If userspace called KEYCTL_DH_COMPUTE with kdf_params containing NULL otherinfo but nonzero otherinfolen, the kernel would allocate a buffer for the otherinfo, then feed it into the KDF without initializing it. Fix this by always doing the copy from userspace (which will fail with EFAULT in this scenario). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: forbid using digest_null as the KDF hashEric Biggers1-1/+11
Requesting "digest_null" in the keyctl_kdf_params caused an infinite loop in kdf_ctr() because the "null" hash has a digest size of 0. Fix it by rejecting hash algorithms with a digest size of 0. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: sanitize key structs before freeingEric Biggers2-4/+1
While a 'struct key' itself normally does not contain sensitive information, Documentation/security/keys.txt actually encourages this: "Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself." In case someone has taken this advice, or will take this advice in the future, zero the key structure before freeing it. We might as well, and as a bonus this could make it a bit more difficult for an adversary to determine which keys have recently been in use. This is safe because the key_jar cache does not use a constructor. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: trusted: sanitize all key materialEric Biggers1-28/+22
As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: encrypted: sanitize all key materialEric Biggers1-18/+13
For keys of type "encrypted", consistently zero sensitive key material before freeing it. This was already being done for the decrypted payloads of encrypted keys, but not for the master key and the keys derived from the master key. Out of an abundance of caution and because it is trivial to do so, also zero buffers containing the key payload in encrypted form, although depending on how the encrypted-keys feature is used such information does not necessarily need to be kept secret. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.